This document contains a crash course for the JEE 2022 exam focusing on semiconductors. It provides 12 multiple choice questions related to topics in semiconductors, transistors, diodes, and basic circuit analysis. The questions cover concepts like doping, current gain, voltage gain, equivalent resistance, photodiode wavelengths, and transistor amplifier configurations. Accompanying the questions are explanations from IIT on semiconductors and transistors to help students prepare for the upcoming JEE exam.
This document contains a crash course for the JEE 2022 exam focusing on semiconductors. It provides 12 multiple choice questions related to topics in semiconductors, transistors, diodes, and basic circuit analysis. The questions cover concepts like doping, current gain, voltage gain, equivalent resistance, photodiode wavelengths, and transistor amplifier configurations. Accompanying the questions are explanations from IIT on semiconductors and transistors to help students prepare for the upcoming JEE exam.
This document contains a crash course for the JEE 2022 exam focusing on semiconductors. It provides 12 multiple choice questions related to topics in semiconductors, transistors, diodes, and basic circuit analysis. The questions cover concepts like doping, current gain, voltage gain, equivalent resistance, photodiode wavelengths, and transistor amplifier configurations. Accompanying the questions are explanations from IIT on semiconductors and transistors to help students prepare for the upcoming JEE exam.
This document contains a crash course for the JEE 2022 exam focusing on semiconductors. It provides 12 multiple choice questions related to topics in semiconductors, transistors, diodes, and basic circuit analysis. The questions cover concepts like doping, current gain, voltage gain, equivalent resistance, photodiode wavelengths, and transistor amplifier configurations. Accompanying the questions are explanations from IIT on semiconductors and transistors to help students prepare for the upcoming JEE exam.
IIT BY : TANUJ BANSAL 1. In an intrinsic semiconductor, the density of conduction electrons is 7.07 × 1015 m–3. When it is doped with indium, the density of holes becomes 5 × 1022 m–3. Find the density of conduction electrons in doped Semiconductor
𝑎𝑎 Zero 𝑏𝑏 1 × 109 m–3
𝑐𝑐 7 × 1015 m–3 𝑑𝑑 5 × 1022 m–3
IIT 2. The current gain β of a transistor is 50. The input resistance of the transistor, when used in the common emitter configuration, is 1 kΩ. The peak value of the collector a.c. current for an alternating peak input voltage 0.01V is
𝑎𝑎 100 µA 𝑏𝑏 250 µA
𝑐𝑐 500 µA 𝑑𝑑 800 µA
IIT 3. A transistor is operated in CE configuration at Vcc = 2V such that a change in base current from 100 µA to 200 µA produces a change in the collector current from 9 mA to 16.5 mA. The value of current gain, β is
𝑎𝑎 45 𝑏𝑏 50
𝑐𝑐 60 𝑑𝑑 75
IIT 4. Input signal to a common emitter amplifier having a voltage gain of 1000 is given by vi = (0.004 V) sin (ωt + ω/2). The corresponding output signal is
𝑎𝑎 (40V) sin (ωt + ω/2) 𝑏𝑏 (0.004V) cos (ωt + ω/2)
𝑐𝑐 (4V) cos (ωt – ω/2) 𝑑𝑑 (4V) sin (ωt – ω/2)
IIT 5. The adjoining logic symbol is equivalent to
𝑎𝑎 OR gate 𝑏𝑏 AND gate
𝑐𝑐 NOT gate 𝑑𝑑 NAND gate
IIT 6. Which of the following gates corresponds to the truth table given below?
A B C 𝑎𝑎 NAND 𝑏𝑏 NOR 1 1 0 1 0 1 𝑐𝑐 XOR 𝑑𝑑 4 OR 0 1 1 2 He
0 0 1
IIT 7. The combination of gates shown in the circuit is equivalent to
𝑎𝑎 OR 𝑏𝑏 AND
𝑐𝑐 NOR 𝑑𝑑 4 NAND 2 He
IIT 8. A p-n photodiode is manufactured from a semiconductor with band gap of 3.1 eV. Which of the following wavelengths can be detected by it?
𝑎𝑎 4000 Å 𝑏𝑏 3900 Å
𝑐𝑐 4200 Å 𝑑𝑑 Both (A) and (B)
IIT 9. Four equal resistors, each of resistance 10 Ω, are connected as shown in the circuit diagram. The equivalent resistance between A and B is
𝑎𝑎 5Ω 𝑏𝑏 10 Ω
𝑐𝑐 10 Ω 𝑑𝑑 40 Ω
IIT 10. What is the value of output voltage V0 in the circuit shown in the figure?
𝑎𝑎 6 𝑉𝑉 𝑏𝑏 14 𝑉𝑉
𝑐𝑐 20 V 𝑑𝑑 26 V
IIT 11. Calculate the current I in the following circuit, if all the diodes are ideal. All resistances are of 200 Ω.
𝑎𝑎 Zero 𝑏𝑏 1A
𝑐𝑐 2A 𝑑𝑑 4A
IIT 12. A transistor having α = 0.99 is used in a common base amplifier. If the load resistance is 4.5k Ω and the dynamic resistance of the emitter junction is 50 Ω the voltage gain of the amplifier will be
𝑎𝑎 79.1 𝑏𝑏 89.1
𝑐𝑐 78.2 𝑑𝑑 450
IIT DPP in MCQ Quiz Find the DPP in MCQ QUIZ Format to make your DPPs Practice more interesting and interactive. Go and check the Tutorial video in Notice Section in “Batch Demo Videos” Tag. THANK YOU
