Scribd
Upload
1K views1 page

FT003 Manual V2

This document provides information about the features and operation of a 5.1 channel Dolby/DTS decoder. It describes the status LED lights that indicate the type of audio being decoded. It also outlines the audio inputs and outputs, including analog and digital connections, as well as the AB control input that selects the audio source. Power is supplied via an 8-24 volt DC input.

Uploaded by

jineeshpaul202125
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

FT003 Manual V2

This document provides information about the features and operation of a 5.1 channel Dolby/DTS decoder. It describes the status LED lights that indicate the type of audio being decoded. It also outlines the audio inputs and outputs, including analog and digital connections, as well as the AB control input that selects the audio source. Power is supplied via an 8-24 volt DC input.

Uploaded by

jineeshpaul202125
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

5.

1 DTS / DOLBY DECODER


TV(ARC) COAXIAL OPTICAL FT003 VER 2
1 LED STATUS :
If received and decoding DD (AC3) audio will glow DOLBY LED.
If received and decoding DTS audio will glow DTS LED.
if PCM audio received and PRO II decoded will glow PCM LED.

STATUS LED
OFF : Signal not connected.
SOLID BLUE : Source connected but no audio signal.
INPUT/5.1/2.1
1Sec BLINKING : Source connected and audio is decoding.

PWR
500mS BLINKING : ARC Connecting ...
B FAST BLINKING : Board Fault

MINI DECODER Ver 2.0


A
5 2 GPIO :

GND
LED Panel Communication Output ( Optional )
STATUS

PCM
(PROLOGIC II)
3 AUDIO OUTPUTS :
AB CONTROL
GND +12V 5.1 channel decoded analog output
DD
6 Output Volt - 2 Vrms A
1 DTS
5.1CH OPTICAL :
B
AUX 4 AUDIO INPUT :
GPIO AUX ( STEREO ANALOG INPUT)
SW

FR
CE
SR

GND
SL

FL

COAXIAL: A
B
5 SOURCE SELECTION AB CONTROL :
A = LOW, B = HIGH : OPTICAL, HDMI ARC : A
A = HIGH , B = LOW : COAXIAL, B
2 3 4 A = LOW , B = LOW : TV(ARC) ,
A
A = HIGH, B = HIGH : AUX, AUX :
Features: PWR = HIGH : Decoder Power off ,
B

✔Support 5.1 Dolby / DTS / Dolby Prologic II. PWR = LOW : Decoder Power on,
✔Prologic II Modes: MOVIE , MUSIC, MATRIX , VIRTUAL, EMULATION
6 POWER :
✔24bit High-Performance DAC and ADC. +8 to 24 Volt DC single power supply.
✔Inbuilt Bass Management
✔80Hz Crossover High pass and Low pass
✔Full featured LED status

You might also like