100% found this document useful (1 vote)
266 views2 pages

Type 202221

The Regulateurs Europa 2221 is a proportional hydraulic actuator that can provide an output of 8, 15, 25, 34 or 40 ft-lbs. It is based on a popular 1100 series hydraulic governor and shares many common parts for quick maintenance. The actuator is self-contained with its own oil supply and can interface with digital electronic governors. It is a low maintenance and high reliability solution for applications requiring proportional hydraulic actuation.

Uploaded by

api-3779075
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
266 views2 pages

Type 202221

The Regulateurs Europa 2221 is a proportional hydraulic actuator that can provide an output of 8, 15, 25, 34 or 40 ft-lbs. It is based on a popular 1100 series hydraulic governor and shares many common parts for quick maintenance. The actuator is self-contained with its own oil supply and can interface with digital electronic governors. It is a low maintenance and high reliability solution for applications requiring proportional hydraulic actuation.

Uploaded by

api-3779075
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TYPE 2221

Hydraulic Servo Actuator

Work output 8,15,25,34 or 40 ft.lbf

The Regulateurs Europa 2221 actuator is a proportional


actuator in which the output shaft position is
proportional to the electric input signal.

Based on the popular, well proven, 1100 series hydraulic


governor there are many common parts, readily available
from stock, for quick maintenance and service.

A booster unit can be supplied for applications where


minimal starting air consumption is required.

TYPE 2221 Hydraulic Servo Actuator

FEATURES
• Designed for use with the Viking range of digital
• True proportional actuator electronic governors and engine management

• Self contained oil supply systems

• Based on the popular 100 series governor • Standard adaptors available to replace other
manufactures governors
• One module with 5 different work outputs all within
the same frame size • Can be used with other manufacturers electronic
governors
• Booster option
• Low maintenance / high reliability
TYPE 2221
Hydraulic Servo Actuator
SPECIFICATION

Actuator Input Signal Rotation


0-1 normal operating range Either clockwise or counter clockwise.
250mA - 750mA)
Drive Shaft Dimensions
Open loop positional accuracy Standard 3/4 in nominal diameter, 48 SAE
approximately ± 1.5% FSD serration's or 25mm nom. Diameter keyed.
Other drive shafts are available to suit
Actuator Drive Speed application.
Normal operating speed range 300 - 1500
r/min (maximum 1200 r/min for 40 ft ibf) All drive shafts are fitted with mechanical
face seals to prevent oil contamination.
Speed Range
At rated engine speed 900 - 1500 r/min Weight
52lb (24kg).
Output Shaft Movements
50˚ max. with 30˚ or greater to be used NOTE: 1 Signal conversions units are
from full load to no load. available if actuator is to be driven by
non Regulateurs Europa controllers.
Oil Supply 2 Base plate adaptors are available to
Self contained 0.8 imp galls (3.6 litres). convert actuator to other manufacturers
base designs.
Power to Derive Actuator
Less than 0.5hp (0.37kW) (1500 r/min Consult the Sales Department for
actuator drive speed) further information.

Output Shaft Dimensions


5
/8 in nominal diameter, 36 SAE serrations

Regulateurs Europa Regulateurs Europa BV


Port Lane, Colchester, Essex CO1 2NX, England 1e Energieweg 8, 9301 LK, Roden, Netherlands.
Telephone: +44 (0) 1206 799 556 Telephone: +31 (0) 5050 198 88
Email: [email protected] Email: [email protected]
Website: www.regulateurseuropa.com Website: www.regulateurseuropa.com

You might also like