Scribd
Upload
159 views1 page

Omega Etb 058

This document describes an experimental training board used to determine the energy band gap of a semiconductor diode. The board contains a regulated power supply, microammeter, semiconductor diode, thermometer, and electrically heated oven. Students can use the board to draw characteristics of a PN junction diode for reverse saturation current over temperature and determine the energy band gap. The board is self-contained and comes with operating instructions and references to help students conduct the experiment and analyze results.

Uploaded by

INSIF Electronics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views1 page

Omega Etb 058

This document describes an experimental training board used to determine the energy band gap of a semiconductor diode. The board contains a regulated power supply, microammeter, semiconductor diode, thermometer, and electrically heated oven. Students can use the board to draw characteristics of a PN junction diode for reverse saturation current over temperature and determine the energy band gap. The board is self-contained and comes with operating instructions and references to help students conduct the experiment and analyze results.

Uploaded by

INSIF Electronics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

R

DETERMINATION OF ENERGY BAND


GAP IN SEMICONDUCTOR DIODE
A SIGN OF QUALITY PRODUCT
OMEGA TYPE ETB-58

OMEGA TYPE ETB-58 Experimental Training Board has 06 Mains ON/OFF switch and Fuse.
R
been designed specifically for Determination of Energy 07 The unit is operative on 230V ±10% at 50Hz A.C.
Band Gap in Semiconductor (P-N Junction Diode) using Mains.
Temperature dependent of reverse saturation current. The 08 Adequate no. of patch cords stackable from rear both
board is absolutely self contained and requires no other ends 4mm spring loaded plug length ½ metre.
apparatus. 09 Good Quality, reliable terminal/sockets are provided
Practical experience on this board carries great educative at appropriate places on panel for connections
value for Science and Engineering Students. /observation of waveforms.
OBJECT 10 Strongly supported by detailed Operating

A SIGN OF QUALITY PRODUCT


01 To draw the characteristics of a P-N junction Diode for
reverse saturation current and temperature.
Instructions, giving details of Object, Theory, Design
procedures, Report Suggestions and Book
02 To determine the Energy Band Gap in a P-N Junction References.
Diode. 11 Weight : 3 Kg. (Approx.)
FEATURES 12 Dimension : W 340 x H 125 x D 210
The board consists of the following built-in parts :
01 2V D.C. at 10mA, regulated Power Supply.
02 Digital Microammeter, 3½ digits having range 200mA
D.C.
03 Semiconductor Diode.
04 Thermometer 0-110 °C.
05 Oven, Electrically heated to heat the Semiconductor
Diode.

We are committed to the continuous development of our products, and therefore reserve the right to amend specifications without prior notice.

OMEGA ELECTRONICS
Marketing Division:
Works: E-mail : [email protected] B-28, Fateh Singh Scheme, Opp. Rajputana
28E & F, Malviya Industrial Area,
22-12-2014

: [email protected] Palace Sheraton, Jaipur-302006 (INDIA)


Jaipur-302 017 (INDIA)
Phone: 0141-2751136, 2751559 Phone : 091-141-2375647, 2379223
www.omegaelectronics.net Fax : 091-141-2204481

You might also like