GE Catalogue

ICP-OES/ICP-MS
Supplies & Accessories

Catalogue
Issue 10
Contents
Contents
Nebulizers PerkinElmer®
Introduction to Glass Expansion Nebulizers..................................................1 NexION 5000................................ ICP-MS..................................................30
Nebulizer Types.............................................................................................1 NexION 1000/2000....................... ICP-MS..................................................32
Glass Expansion Nebulizer Part Numbers Explained...................................1
NexION 300/350........................... ICP-MS..................................................34
Learn about Glass Expansion Nebulizers.....................................................2
Avio 200/500................................. ICP-OES................................................37
Nebulizer Selection Guide.............................................................................3
Optima 8000/8300 DV.................. ICP-OES................................................39
Spray Chambers
Introduction to Glass Expansion Spray Chambers........................................5 Shimadzu®
Spray Chamber Types...................................................................................5 2030............................................. ICP-MS..................................................41
Helix CT - Interface Between Nebulizer and Spray Chamber.......................5 9000/9800 and 7500/8100........... ICP-OES................................................43
HydraMist Simultaneous Cold Vapor/Pneumatic Nebulization Spray Spectro™

Chamber........................................................................................................6
Arcos II EOP/ Blue EOP/TI & Green TI.............ICP-OES...........................46
Spray Chamber Selection Guide...................................................................7
Arcos II SOP/ Blue SOP & Green SOP/DSOI...ICP-OES...........................48
Torches..................................................................................................8 Thermo Fisher®

RF Coils and ICP-MS Cones...............................................9 Q/RQ/TQ...................................... ICP-MS..................................................50
PRO Duo...................................... ICP-OES................................................52
Accessories PRO Radial.................................. ICP-OES................................................54
IsoMist XR Programmable Temperature Spray Chambers.........................10 6000/7000 Duo............................. ICP-OES................................................56
Guardian In-Line Sample Filter...................................................................11 6000/7000 Radial......................... ICP-OES................................................58
Guardian In-Line Non-Return Gas Filter.....................................................11

Fittings and Connectors
Eluo Nebulizer Cleaning Tool......................................................................12
Nebulizer Fittings and Connectors............................................................. 60
Trident CT In-Line Reagent Additions Kit....................................................12
Spray Chamber/Torches Fittings and Connectors...................................... 61
Elegra Argon Humidifier..............................................................................13
Single-Cell Sample Introduction System for ICP-MS..................................13 Pump Tubing

Laser Ablation..............................................................................................14 Standard Peristaltic Pump Tubing.............................................................. 62
Autosampler Probes....................................................................................15 Contour Flared End Peristaltic Pump Tubing............................................. 65
Agilent Technologies®
7900............................................. ICP-MS..................................................16
8900............................................. ICP-MS..................................................19
7800/7850.................................... ICP-MS..................................................22
7700/8800.................................... ICP-MS..................................................25
5000 Series SVDV/VDV/RV......... ICP-OES................................................28
Copyright © 2021, Glass Expansion Pty Ltd. All rights reserved. All other trademarks are the property of their respective owners
Nebulizers
Introduction to Glass Expansion Nebulizers

The nebulizer is a critical component of your ICP sample introduction system, so why not opt for the highest quality? Glass Expansion has been manufacturing
ICP nebulizers since the early 1980s and continually updates nebulizer designs to improve performance and ease of use. Our proprietary designs include
a thick walled VitriCone capillary, UniFit sample line connector and the Direct Connect (DC) product line.
Whether your ICP laboratory is analyzing clean aqueous samples, samples containing HF and/or high dissolved salts, or volatile organic solvents;
Glass Expansion has a nebulizer to suit your needs. Learn about the performance advantages and overall difference in construction quality that a Glass
Expansion nebulizer can provide your ICP laboratory.
Nebulizer Types
Nebulizer TDS (%) Particulates (µm) HF Precision Purity Material
SeaSpray 20 75 No High Good Glass

MicroMist 15 40* No High Good Glass
Conikal 5 75 No High Good Glass
Slurry 1 150 No High Good Glass
Quartz SeaSpray 20 75 No High Excellent Quartz
OpalMist 15 75* Yes High Excellent PFA
DuraMist 30 75* Yes High Good PEEK
VeeSpray 30 300 Yes Moderate Good Ceramic
* Varies with nebulizer uptake
Glass Expansion Nebulizer Part Numbers Explained

A Gas pressure rating of 40 psi
Glass DC Nebulizers
# Gasline fitting type eg:
Conikal 13 = Suitable for Agilent ® 5000 Series
1mL/min uptake A13-07-UC1 yy The argon flow in L/min eg. 07=0.7L/min
ZZ Nebulizer model type:

UC = Conikal U-Series nebulizer
US = Slurry U-Series nebulizer
USS = SeaSpray U-Series nebulizer
UM = MicroMist U-Series nebulizer
CV = Ceramic VeeSpray v-groove nebulizer
DM = DuraMist HF resistant nebulizer
PFA = OpalMist PFA HF resistant nebulizer
A#-yy-ZZnnn nnn Aspirated uptake at nominal argon flow, in mL/min eg:

UC1 = 1mL/min
UM04 = 0.4mL/min
PFA005 = 0.05mL/min
1
Nebulizers
Learn About Glass Expansion Nebulizers

All Glass Expansion concentric nebulizers use the unique VitriConeTM
construction delivering the best possible precision. DC Nebulizer Gas Fitting Connectors
Agilent® Vista/700-ES, 4100/4200 70-803-0969

DC Nebulizer
Agilent® 4500/7500 70-803-1086
Agilent® 7700/7800/7900/8800/8900 70-803-1105
Agilent 5000 ICP-OES Series

®
70-803-1105
Analytik Jena ICP-MS®

70-803-0969
Analytik Jena® ICP-OES 70-803-1105
Horiba® Jobin Yvon (All models) 70-803-1105
Leeman (All Models) 70-803-0969

The DC (Direct Connection) nebulizer has a UniFit sample connector which Nu Instruments ICP-MS 70-803-1858
slides easily over the sample arm and an argon connector configured to
connect directly to your ICP. PerkinElmer® ICP-OES 70-803-1070
PerkinElmer® Elan/NexION 300/350 70-803-1049

DC Nebulizer Benefits:
• Inert metal-free argon connector. PerkinElmer NexION 1000/2000/5000
®
70-803-1449
• Instrument-specific Direct Connect flexible argon line. Shimadzu (All models)

®
70-803-1311
• Reliable ratchet fitting ensures leak-free gas connection. Spectro™ (All models) 70-803-1070
DC versions of the SeaSpray, MicroMist, Conikal, Slurry, DuraMist, OpalMist Thermo® PRO, 6000/7000, Neoma, Q/RQ/TQ
and VeeSpray nebulizers are available to suit the most common models of 70-803-1292
& X-Series
ICP-OES and ICP-MS.
Thermo® Neptune 70-803-1468
The DC nebulizer part number has a prefix specific to each type of gas
connector. For example, the prefix “A13-” denotes a connector for the
Agilent ® 5000 ICP-OES Series, so part number A13-07-USS2 is a SeaSpray
nebulizer configured for direct connection to the Agilent ® 5000 Series. U-Series Glass Concentric Nebulizers
SeaSpray, MicroMist, Conikal and Slurry U-Series nebulizers are available to
In addition to these unique benefits, the DC nebulizer shares the
suit all common models of ICP-OES and ICP-MS. Each U-Series nebulizer
following benefits with the U-Series nebulizer:
is supplied with a UniFit sample connector.
• Resists blockage: The sample channel is uniform from the entry point to
the tip, so there is nowhere for particulates to be trapped. U-Series nebulizers can be identified by the letter ‘U’ in the part number, eg.
ARG-07-USS2 or ARG-1-UM04.
• Fast washout: Since there is nowhere for sample to be trapped, the fastest
possible washout and highest sample throughput is achieved.
• Simple to use: Our proprietary UniFit connector slides easily over the
sample arm and creates an excellent seal.
• Full length VitriCone construction: With the VitriCone design, the sample
channel is constructed from heavy glass capillary which is machined to
very high tolerances. All glass concentric nebulizers in this catalog are U-Series nebulizers.
U-Series Quartz Concentric Nebulizers

The Quartz SeaSpray concentric nebulizer is made from ultra pure quartz
and offers outstanding nebulization efficiency for trace level analyses.
It offers freedom from clogging while nebulizing solutions to the limit of
solubility of most mineral salts, and conferring significant sensitivity gains.
It is specifically designed for ultra trace level analysis.
2
Nebulizers
Nebulizer Selection Guide

Aqueous Solutions without HF for ICP-OES
Limited Volume?
Yes No
MicroMist High TDS? >5%
Yes No
Particulates? >75µm Particulates? >75µm
Yes No Yes No
VeeSpray Requirement? Slurry Requirement?
Best Performance High TDS Best Performance Routine Operation

Tolerance
SeaSpray DuraMist SeaSpray Conikal
Aqueous Solutions without HF for ICP-MS
Limited Volume?
Yes No
MicroMist High TDS? >5%
Yes No
Yes No Yes No
VeeSpray SeaSpray Slurry Requirement?
Best Performance Low-Level Boron Highest Purity
SeaSpray Quartz SeaSpray OpalMist
3
Nebulizers
Nebulizer Selection Guide
Solutions Containing HF
HF Concentration >5%?
Yes No
OpalMist High TDS >5%?
Yes No
Yes No Yes No
VeeSpray DuraMist VeeSpray Requirement?
Highest Purity Best Performance
OpalMist DuraMist
Organic Solutions
Volatile Solvent?
Yes No
MicroMist Particulates? >75µm
Yes No
Slurry Conikal
4
Spray Chambers
Introduction to Glass Expansion Spray Chambers

The spray chamber is a crucial component of the ICP sample introduction system since it has a profound effect on transport efficiency, precision, and
washout. Glass Expansion revolutionized the spray chamber design for the ICP industry with the Tracey and Twister cyclonic spray chamber, providing
improved efficiency and reduced washout. Glass Expansion’s unique Helix CT nebulizer interface, provides a zero dead volume seal that results in higher
throughput compared to non-Glass Expansion designs.
Spray Chamber Types

Helix CT - The Modern Interface Between
Nebulizer and Spray Chamber
Tracey Internal Volume, mL: 50
Internal Baffle: No Locking Screw Seal
HF-resistant: No
Precision: Very Good
Purity: Good
Material: Glass
Twister Internal Volume, mL: 50

Internal Baffle: Yes
HF-resistant: No
Precision: Excellent
Purity: Good
Material: Glass
Traditionally, ICP-OES and ICP-MS sample introduction systems have
Cinnabar Internal Volume, mL: 20
relied on o-rings to form a gas-tight seal between the nebulizer and spray
Internal Baffle: No chamber. There are several drawbacks with an o-ring seal, such as:
HF-resistant: No
• Potential for contamination due to dead volume around the o-ring seal
Purity: Good • Chemical resistivity of strong acids and organic solvents
Material: Glass • The o-rings are difficult to replace, often requiring tools
Internal Volume, mL: 20 • Bonding to the nebulizer can result in breakage

Twinnabar
Internal Baffle: Yes Glass Expansion Helix CT spray chamber with ConstantTorque technology,
HF-resistant: No provides a constant, reproducible, inert, gas-tight seal between the
Precision: Very Good nebulizer and spray chamber.
Purity: Good The main feature of the Helix CT spray chamber is the Helix locking screw
Material: Glass with built-in torque control mechanism that allows for a consistent seal of
the PTFE ferrule against the nebulizer –making it impossible to overtighten
Tracey TFE Internal Volume, mL: 50 or undertighten while ensuring a gas-tight seal each and every time.
Internal Baffle: No A PressFit PTFE ferrule provides a chemically inert seal around the
HF-resistant: Yes nebulizer, which is immune to strong acids and organic solvents routinely
Precision: Good used in ICP sample preparation.
Purity: Good The Helix CT cyclonic spray chamber by Glass Expansion, therefore,
Material: PTFE eliminates all the drawbacks of the o-ring nebulizer seal, while improving
user safety by preventing broken nebulizers.
Twister TFE Internal Volume, mL: 50
Internal Baffle: Yes
HF-resistant: Yes
Purity: Good
Material: PTFE
Tracey PFA44 Internal Volume, mL: 44

Internal Baffle: No
HF-resistant: Yes
Precision: Good
Purity: Excellent
Material: PFA
5
Spray Chambers
HydraMist Simultaneous Cold Vapor/

Pneumatic Nebulization Spray Chamber
HydraMist Kit
Agilent® 5000 ICP-OES Series KT-1157

Helix CT To Plasma To Mixing Chamber
Agilent® 7700/7800/7900/8900 KT-1168
Analytik Jena® PQ 9000 KT-1157
PerkinElmer Avio 200/500

®
KT-1157
PerkinElmer Optima 8000/8300 DV

®
KT-1162
PerkinElmer® Optima 4000/5000/7000 DV KT-1162
Shimadzu® ICPE 9000/9800 KT-1157
Spectro Arcos II SOP/EOP and Blue EOP/SOP

™
KT-1160
Thermo PRO
®
KT-1160
Thermo® Duo 7600 KT-1156
UniFit Drain Thermo® Duo 6000/7200/7400 KT-1179
* Note: Nebulizer is not included in HydraMist Kit.
The Glass Expansion HydraMist is a sensitive, simple-to-use spray chamber

for Inductively Coupled Plasma (ICP) that allows simultaneous operation of
both conventional pneumatic nebulization and cold-vapor/hydride generation.
Cold vapor generation can provide more than 10-fold improvement in
sensitivity on ICP for cold vapor forming elements such As, Sb, Se, Tl and
Hg. The generation of volatile species of these elements results in increased
analyte loading of the analytical plasma giving lower detection limits.
The design of the HydraMist spray chamber is based upon Glass Expansion’s
industry-standard cyclonic spray chamber, giving excellent sensitivity and
short-term analytical precision with fast washout. The HydraMist spray
chamber features a secondary inlet port that mixes the aerosolized sample
and liquid reductant inside the spray chamber for rapid conversion of the As,
Sb, Se, Tl and Hg analytes into volatile hydride species. The unique drain
design ensures fast, complete removal of waste from the spray chamber,
eliminating excess hydrogen build-up that causes sample reflux degrading
analytical precision.
The HydraMist Spray Chamber Features:
• The same outstanding short-term analytical precision and washout as other
Glass Expansion cyclonic spray chambers
• Fast and complete vapor phase formation of volatile As, Se, Sb, Tl and Hg
species for the best detection limits in hydride generation mode
• A unique drain design to eliminate hydrogen build-up and sample reflux that
degrades short-term precision
• Economic, just replace your current spray chamber and keep your existing
nebulizer
• Improve productivity by analysing non-hydride forming elements and cold
vapor elements simultaneously, avoiding system shutdowns to change over
between the hydride generator accessory and conventional pneumatic
nebulization
6
Spray Chambers
Spray Chamber Selection Guide
Aqueous Solutions
HF?
Yes No
Spectrometer Type? Limited Volume?
ICP-OES ICP-MS Yes No
Tracey TFE Tracey PFA44 Cinnabar Primary Goal?
Best Sensitivity Best Precision
Tracey Twister
Organic Solutions
Volatile Solvent?
Yes No
IsoMist XR Limited Volume?
Yes No
Cinnabar Twister
7
Torches
D-Torch (Demountable Torch)

The D-Torch is a revolutionary new demountable torch design. It provides Complete D-Torch
the benefits of a fully demountable torch at a significantly lower cost.
Interchangeable outer tubes made of quartz or ceramic are available.
The quartz tube is ideal for most aqueous applications and, since the
outer tube is usually the first to wear, you can make a significant saving by
replacing just the outer tube rather than the whole torch.
The ceramic outer tube is of particular benefit for the analysis of samples
with high salt content or wear metals in engine oils, where quartz outer Injectors
tubes often suffer from short lifetime. The ceramic outer tube has a much
longer lifetime, greatly reducing interruptions and downtime due to torch
failure. The D-Torch uses the same mounting system as the standard fixed
torch so there is no additional cost or complexity to install it.
• Demountable outer tube – why replace the entire torch when just the
outer tube wears? Outer Tubes
• Interchangeable quartz and ceramic outer tubes.
• Much lower cost than other demountable torches.
• Interchangeable injectors for aqueous, organics, high dissolved solids
or HF applications.
* The D-Torch is covered by US Patent 8,232,500 B2
The D-Torch models suited for the Agilent ® 5000 Series, PerkinElmer ® Avio
200/500, Thermo ® PRO and Spectro™ Arcos II and Blue incorporates the
same easy to use, self-aligning and locking features of the standard torch Torch Body
in a robust cost effective design.
Semi Demountable Torch

• Highly accurate construction
• Lower running cost than one-piece torches
Usually comprises a quartz torch body, a torch adaptor, an injector and
GazFit connectors. All these parts are replaceable, making the semi
demountable torch more cost effective than the fixed quartz torch.
The design of the torch for standard analyses and HF analyses is
the same, with only the injector material changing. For aqueous and
organics analyses use a quartz injector, while for HF analyses use an
alumina injector. Hence simply interchange between quartz and alumina
injectors for appropriate analyses. Several internal diameters for both
quartz and alumina injectors are also available.
Fixed Quartz Torches (One Piece)

• Precise quartz construction
• Wide range held in stock
• Simple to use
• Lowest initial cost
8
RF Coils and ICP-MS Cones
RF Coils – more efficient energy transfer

Why Change your RF Coil?
• Regular replacement of corroded coils reduces the load on the RF
generating system.
• Changing corroded coils increases energy transfer, resulting in a more
robust plasma and generally higher analytical line intensities.
Advantages of Glass Expansion RF Coils

• High quality and consistent plating of our coils promotes extended coil life.
• Each coil is supplied on a plastic former ensuring correct dimensions and
easier installation.
• Each coil is supplied in a special protective container to ensure correct
dimensions are maintained, and the coil arrives corrosion free.
• Correct alignment of the RF Coil with respect to the torch body reduces
devitrification of the outer tube.
• Reusable alignment tools ensure correct installation every time. Our Do-it-
yourself instructions saves time.
Glass Expansion installation Kits for RF Coils

• Incorrect alignment of the torch in the coil will dramatically reduce torch life. The Glass Expansion
Installation Kits help ensure correct alignment and maximum torch life.
• Correct alignment of the RF Coil with respect to the torch body reduces devitrification of the outer tube.
• Re-usable alignment tools are available separately to ensure correct installation of the coil every time.
• Our easy to follow Do-It-Yourself installation instructions save you time, and the cost of a service call.
All kits contain:

• An Installation Kit – Aligns coil to torch mounting bracket.
• Required Spanner/s – Designed specifically for each instrument.
• USB - Do-It-Yourself instructions.
ICP-MS Cones
Our ICP-MS interface cones are made from ultra-pure metals sourced from specialty smelters. Our highly
experienced machinists use state of the art CNC machines and electron beam welding to provide cones with
the finest tolerances for the highest quality.
We supply cones for all of the popular ICP-MS models and, to make sure you get all the support you need,
we have a staff of technical experts and a fully equipped ICP-MS laboratory for testing and evaluation.
No-risk guarantee:
As with all of our products, our cones are backed by our complete satisfaction guarantee.
Free refurbishment:
Extend the life of your platinum cones with our free refurbishment program. In many cases, a platinum cone
can be refurbished multiple times and its lifetime greatly extended. As a customer service, Glass Expansion
will refurbish your platinum cones free-of-charge.
Platinum reclaim:
If your platinum cone cannot be refurbished, we will provide a rebate for the value of platinum in the cone.
Coneguard
The ConeGuard Thread Protector protects the cone thread from corrosive cleaning solutions and greatly
extends cone life.
9
Accessories
IsoMist XR Programmable
Temperature Spray Chamber Elevated Sample Introduction Temperatures
Enhances Sensitivity
The sensitivity for many analyses can be enhanced by operating the
spray chamber at elevated temperatures - especially important for limited
sample volumes. Heating the spray chamber also helps with the analysis
of viscous samples such as lubricants and edible oils.
A Spray Chamber Optimized for Analytical Performance

The IsoMist XR incorporates a proven cyclonic spray chamber design in
glass, quartz and HF resistant PFA with Helix CT interface. Compared to
a Scott type spray chamber, cyclonic spray chambers are more sensitive
and have better washout. The IsoMist XR includes the Helix CT nebulizer
interface, which eliminates sample contamination and ensures easy
nebulizer removal for routine nebulizer cleaning. The Helix CT nebulizer
interface also has zero dead volume, reducing carry-over and improving
washout between samples. With a positive stop built-in, Helix CT ensures
correct and reproducible nebulizer insertion depth for constant nebulizer
performance.
The IsoMist XR programmable temperature controlled cyclonic spray

chamber now features an improved thermodynamic design providing an
extended temperature range and faster cool-down, so your ICP is ready
to go sooner.
IsoMist XR is a compact, convenient and maintenance-free temperature
controlled sample introduction system for all ICP’s.
Improved Analytical Stability with Precise Temperature Control

On the IsoMist XR, the spray chamber temperature is accurately controlled
through an improved thermodynamic design using a multi-stage peltier
device. The spray chamber temperature is settable in 1oC increments
from -25oC to 80oC guaranteeing optimum conditions can be used for any
application.
Reduce Oxide Interferences in ICP-MS

Using the IsoMist XR spray chamber at sub-ambient temperatures on
an ICP-MS, the sample is cooled, less water vapor is transferred to the
plasma resulting in lower oxide formation and reduced polyatomic (ArO,
ArOH) interferences. Less oxides in the plasma mean fewer interferences,
improving accuracy and detection limits.
Perfect for Naphtha and Gasoline Analysis Easy to Use Software

For volatile solvents, a lower sample introduction temperature reduces For maximum convenience, the IsoMist XR can be controlled from a PC
nebulization efficiency avoiding quenching of the plasma from solvent over- via USB or Bluetooth wireless interface. The spray chamber temperature
loading. With a minimum operating temperature of -25oC, analyzing volatile can be monitored during an analytical run with time vs temperature plot on
organic solvents such as naphtha and gasoline by ICP is even easier. your PC screen.
Improve Analytical Stability with Constant Elegant, Ergonomic and Compact

Spray Chamber Temperature The IsoMist XR is an elegant, compact, stand-alone system manufactured
Fluctuations in the lab temperature affects sample viscosity and from materials resistant to attack from acids and solvents commonly used in
nebulization efficiency. Maintaining the sample introduction system at ICP analysis. By using a peltier to maintain the spray chamber temperature,
a constant and stable temperature improves analytical reproducibility, the messy, noisy and high-maintenance refrigerated circulating baths used
enhances throughput and lowers operating costs by reducing the need to with jacketed spray chambers has been eliminated. The compact design
re-run samples when a check standard drifts outside the acceptable upper means all IsoMist XR Programmable Temperature Controlled Spray
or lower limits. Chambers are compatible with virtually any ICP-OES or ICP-MS.
10
Accessories
Guardian In-Line Sample Filter
If there are particulates in your samples, there is a risk that they may Sample tubing 120μm PolyComb Filter Ferrule Connector
get trapped in the narrow bore sample tubing or within the nebulizer.
The Guardian In-Line Sample Filter provides a simple and effective way
to eliminate this risk. This filter is easily inserted in the sample tubing
between the autosampler probe and the nebulizer. It incorporates a 120 Guardian In-Line Sample Filter
micron PolyComb filter and is suitable for use with 1/16 inch (1.6mm) OD
or 1.3mm OD sample tubing. In-Line Filter 70-803-1108
The purpose-built clog-resistant design Eluo Adaptor for In-Line Filter 70-803-1160
is ideal for ICP samples. Unlike sintered
or frit style filters, the linear honeycomb Fitting Seal 1/16 (PKT 10) 70-803-0749
structure makes the PolyComb filter
Fitting Seal 1.3mm (PKT 10) 70-803-0748
resistant to clogging from particulates.
Any particle build-up is easily removed
by back-flushing using the Eluo Adaptor
70-803-1160. And the PEEK material
is suitable for use with all of the most
common ICP solutions. Eluo Adapter For In-Line Filter
Guardian In-Line Non-Return Gas Filter

Non-return valve
30μm particulate filter
The new Guardian In-line Non-Return Gas Filter provides protection for
your ICP system in two ways:
Inert PEEK construction
1. A non-return valve prevents acidified sample or rinse solution
syphoning into the instrument gas box.
Finger-tight ratchet for a consistant seal
2. 30μm PolyComb filter protects the nebulizer from particulates in the
instrument gas supply.
The Guardian In-line Non-Return Gas Filter is positioned between the
Argon inlet on the Direct Connection nebulizer and the gas supply fitting Guardian In-Line Non-Return Gas Filter
on the instrument. The In-line Non-Return Filter has a one-way valve that
allows argon to flow from the instrument into the nebulizer, but prevents Guardian DC In-Line Non-Return Gas Filter 70-803-1942
liquid syphoning into the instrument. A unique PolyComb 30μm filter design
protects the nebulizer from particulates from the gas supply or from worn Guardian In-Line Non-Return Gas Filter 70-803-1362
or damaged fittings in the gas lines. Unlike Sintered or Frit style filters, the
linear honeycomb structure makes PolyComb most resistant to particulate *Choose P/N 70-803-1942 if using a DC nebulizer model.
and dissolved solid clogging.
Syphoning of the sample or rinse solution into the nebulizer argon control
module on your ICP can occur at the end of an analytical run when the
nebulizer gas pressure is turned off and there is liquid in the sample flow
path. It is made worse if the autosampler probe stays in the rinse position
at the end of a run.
A real problem using an autosampler for unattended overnight runs, it is a
silent, invisible killer of your ICP. Acidified solution in the instrument Argon
control module can cause corrosion to electronic sensors in mass flow
controllers and damage regulators that can result in expensive repairs to
your ICP and un-planned down time.
11
Accessories
Eluo Nebulizer Cleaning Tool Trident CT™ In-Line Reagent Additions Kits
Cleaning your nebulizer is as easy as 1, 2, 3.

1. Fill your Eluo with Methanol.
2. Insert your nebulizer, tip first, into the Eluo.
3. Clean your nebulizer by pressing the Plunger down.
Particle build-up in a nebulizer capillary and tip causes sample flow to be
constricted, reducing nebulizer efficiency and performance. Now, blocked
nebulizers can be safely and easily restored to optimum performance with Internal standards are often used in ICP Spectrometry to improve stability.
a revolutionary cleaning instrument – the Eluo. The internal standardization process involves the addition of a known
The Eluo is designed to efficiently deliver a cleanser through the nebulizer concentration of a particular element to every sample and can be a very
capillary to dislodge particle build-up and thoroughly clean the nebulizer. time-consuming procedure. The Glass Expansion Trident Kits allow the
One simple action does it all. No more messy procedures or shattered internal standard to be automatically mixed with each sample during
nebulizers in ultrasonic baths. Use the Eluo regularly to maintain nebulizer sample introduction, saving considerable sample preparation time.
performance and prolong nebulizer life. Every lab should have an Eluo. The Trident CT™ mixing chamber is based on the industry-proven design
The Eluo can also be conveniently used to clean the Inline Particle Filter of the Trident, but with the addition of Glass Expansion’s ConstantTorque™
P/N 70-803-1108 with the addition of Adaptor P/N 70-803-1160. (CT) to provide a simple-to-use, leak-free connection for both the internal
standard and sample, every time.
The heart of the kit is the mixing chamber, designed with zero dead
Eluo Nebulizer Cleaning Tool volume CT fittings. With other mixing chambers, worn or improperly fitted
connections leak, inject a stream of air bubbles into the nebulizer flow,
degrading short-term analytical precision (%RSD). By using CT ratchet-
Eluo for Glass concentric Nebulizers 70-ELUO
style fittings, the Trident CT eliminates air leaks, optimizing analytical
Eluo HF Nebulizer Cleaner 70-ELUO-OPD performance.
Fluka RBS-25 concentrate FLUKA25 The Trident CT features:

O-ring Kit for Eluo (2 sets) 70-0806 • Compact, efficient mixing chamber ensures complete mixing of the
sample and reagent.
• CT fittings for a durable, leak-free seal on all connections.
• Zero dead volume connections.
• Completely modular so that damaged or lost components can easily be
replaced.
Check the Trident Dilution Factor Calculator on our website to find out the sample
and internal standard dilution factors for selected combinations of pump tubing.
The peristaltic pump tubing is not supplied as part of the Internal Standard
Kit but can be ordered separately.
In-Line Reagent Additions Kits
Trident CT In-Line Reagent Additions Kit 60-703-1179
Trident Internal Standard Kit for HF (original 60-808-1150

design)
12
Accessories
Elegra Argon Humidifier High Sensitivity Single-Cell Sample

Introduction System for ICP-MS
Single-cell analysis using an Inductively Coupled Plasma-Mass Spectrometer

(SC-ICP-MS) is enhancing the fundamental understanding in cellular biology,
oncology and drug discovery. SC-ICP-MS provides for the quantification of
metals in individual biological cells and is used as a research tool to allow
scientists to study disease aetiology, better understand diseased cell states
and develop new drug treatments to give better patient outcomes.
In single-cell analysis, the sample introduction system converts a continuous
stream of biological cells efficiently into an aerosol of individual cells and
transfers the aerosol into the Inductively Coupled Plasma of the ICP-MS
for analysis. A critical aspect of the sample introduction system is the cells
Elegra Elegra Dual must remain intact and unruptured during the nebulization process to ensure
each individual cell produces a single ion burst inside the plasma that can be
An Argon Humidifier is commonly used in ICP analyses involving samples transferred into the mass analyser of the ICP-MS for quantification.
with high concentrations of dissolved solids. It helps to alleviate salt
Conventional ICP-MS spray chambers have low transport efficiencies
deposits in the nebulizer and torch injector, allowing uninterrupted and
(typically < 5% TE) that filter out larger droplets ( > 5μm) from the nebulizer
maintenance-free operation.
aerosol. As most cell lines of interest are larger than 5μm, the secondary
• Compact, cost-effective design. filtering mechanism of conventional spray chamber designs rejects a
high proportion of the cells from passing to the plasma. To overcome this
• No heating or electric power required. significant deficiency the Glass Expansion spray chamber design for single
• Non-pressurized water reservoir. cell analysis is different from conventional ICP-MS spray chambers.
• An easy-to-use bypass switch allows you to take the Elegra off-line Glass Expansion have developed a high sensitivity Single-Cell Sample
without disconnecting argon lines. (Not available with Elegra Dual) Introduction system which consists of:
• Highly efficient membrane humidification technology. • High efficiency, low uptake, concentric glass nebulizer designed to
efficiently nebulize single-cell suspensions without compromising cell
• Improved signal stability for samples with high TDS. integrity
• Simple to install, use and maintain. • Low volume, on-axis, laminar-flow spray chamber directly coupled to the
ICP for the highest transport efficiency of the nebulized single-cell
• Improves productivity by reducing down-time for cleaning.
• Patent pending MicroJet gas adapter which entrains and shapes the
• Inert metal-free construction eliminates contamination.
aerosol plume to reduce cell deposition onto the spray chamber walls and
• Maximum and minimum fill marks ensure that you are always operating increase sample transport efficiency suspension
under optimum conditions.
• Compatible with all ICP-OES and ICP-MS models. Direct connection to
argon outlet provided for most models.
Single-Cell Sample Introduction System
• Elegra Dual two-channel configuration available for ICP-MS instruments For Agilent® ICP-MS KT-1155
using auxiliary argon.
For Thermo® ICP-MS KT-1172
Elegra Argon Humidifier For TOFWERK icpTOF KT-1172
O-ring for Capricorn or Elegra Cap (PKT 3) 70-V-225 For NexION 1000/2000/5000 KT-1184
Elegra Stand 70-803-1581 For PerkinElmer® NexION 300/350 KT-1204
Elegra Membrane 70-803-1286 For NU ATTOM KT-1205
13
Accessories
Laser Ablation GazFit Connectors
P/N: 21-809-4309 P/N: 70-803-1600
GazFit Union Connectors (for rigid walled tubing)
P/N: 31-808-4034 P/N: 20-809-4550 GazFit Union 4mm (PKT.2) GAZ-04U
GazFit Union 6mm (PKT.2) GAZ-06U
GazFit Union 8mm (PKT.2) GAZ-08U
P/N: 21-809-2801 P/N: 31-808-3863

OD: 4mm
ID: 2mm
Standard GazFit Connectors (for soft walled tubing)
GazFit Connectors for 4mm OD side arm

GAZ-04
(PKT.4)
GAZ-05
(PKT.4)
S13 (13 mm) cup Adaptors GAZ-06
(PKT.4)
GazFit Connectors for 8mm OD arm (PKT.2) GAZ-08

P/N: 31-800-1007 P/N: 21-809-4140
ID: 4mm GazFit Connectors, 2 for 6mm OD side arms,
GAZ-0604
2 for 4mm OD side arms (PKT.4)

GAZ-06-1/8
OD: 8mm with connection for 1/8inch ID tubing (PKT.4)
P/N: 21-809-0965C P/N: 31-808-3045

OD: 6mm OD: 4mm
ID: 4mm ID: 2mm
14
Accessories
Autosampler Probes
For Agilent® SPS 3/SPS 4
PTFE Encapsulated Carbon Fibre Probe 0.25mm ID 70-803-0910
For Agilent® I-AS
PTFE Encapsulated Carbon Fibre Probe 0.25mm ID

60-703-1010
Suitable for Cetac ASX-200/500/800 Series with UniFit, 1100mm total length
and PerkinElmer S20 Series
60-703-1009
PTFE Encapsulated Carbon Fibre Probe 0.25mm ID with UniFit, 686 mm total length
70-803-1088
with EzyFit
Polyimide sheathed Autosampler Probe 0.5mm ID 60-808-1186L
PTFE Encapsulated Carbon Fibre Probe 0.25mm ID 70-803-1523 For PerkinElmer® S10 or AS93+
70-803-1380 PTFE Encapsulated Carbon Fibre Probe 0.5mm ID
with UniFit 70-803-0991
with UniFit
70-803-1443 PTFE Encapsulated Carbon Fibre Probe 0.5mm ID 70-803-1440
with ratchet fitting
PTFE Encapsulated Carbon Fibre Probe 0.75mm ID 70-803-1880 PTFE Encapsulated Carbon Fibre Probe 1.0mm ID 70-803-0816

70-803-0793
with ratchet fitting
For Shimadzu®
70-803-1200
with UniFit, for Shimadzu® ASC-6100F/9800
For Cetac ASX 110 PTFE Sheathed Carbon Fibre Probe 0.75mm ID with
70-803-1477
UniFit, for Shimadzu® AS-10
PFA sheathed Autosampler Probe 0.25mm ID with
70-803-1072
EzyFit
PFA sheathed Autosampler Probe 0.25mm ID with

70-803-1073
UniFit
PTFE Sheathed Carbon Fibre Probe 0.18mm ID with

70-803-1684
UniFit

70-803-1191
with UniFit
15
Agilent® ICP-MS: 7900
Glass DC Nebulizers Spray Chambers (continued)
SeaSpray HydraMist Simultaneous Cold Vapor/

400µL/min uptake A13-1-USS04X Pneumatic Nebulization Spray Chamber
Hydride Kit KT-1168
MicroMist
400µL/min uptake A13-1-UM04X
100µL/min uptake A13-1-UM01Q
*Twister
50mL Cyclonic with Aux. 20-809-2574HE
Conikal
1mL/min uptake A13-1-UC1X
Quartz DC Nebulizers
*Cinnabar
SeaSpray
1mL/min uptake A13-1-QSS1
Quartz Scott Style

For 7900 UHMI 20-809-4144
DC Nebulizers for HF
OpalMist Spray Chambers for HF
400µL/min uptake A13-1-PFA04X
200µL/min uptake A13-1-PFA02X *Tracey PFA44
100µL/min uptake A13-1-PFA01Q 44ml Cyclonic with Aux. 20-809-2578
50µL/min uptake A13-1-PFA005Q Spray Chamber Adaptor KT-1104
*Requires adaptor KT-1104.

DC Nebulizers for Single Cell
MicroMist HE
200µL/min uptake C13-1-UFT02
Torches
Quartz Torches
with 1.0mm Injector 30-807-0558
Peltier Controlled Cyclonic Spray Chambers with 1.5mm Injector 30-807-0557
Glass Spray Chamber KT-1116
Quartz Spray Chamber KT-1116Q
PFA Spray Chamber KT-1116P
Torch Options
Quartz Torch Bonnet 31-808-2577
Quartz Connector with
Dilution Port 31-808-3217
Spray Chambers Quartz Connector with
45deg Dilution Port 31-808-3280
Single-Cell Spray Chamber Kit Straight Quartz Connector 31-808-3288
High Sensitivity Single-Cell Sample
Clamp (PKT 2) 70-803-0846
Introduction System KT-1155
16
Torches (continued) Cones (continued)
Semi-Demountable Torch Sampler Cones (continued)

with 2.4mm Quartz Injector 30-808-3853 Aluminium Sampler AT7701-Al
Torch Options
Semi-Demountable Torch body 31-808-3857
2.4mm Tapered Quartz
Injector 31-808-4168 Platinum Sampler AT7706-Pt
2.4mm Tapered Alumina Platinum Sampler
Injector 31-808-3855 (18 mm Insert) AT7706A-Pt
2.4mm Sapphire Capillary Platinum Sampler
Injector 31-808-4159 Boron Free AT7706-Pt-BF
Injector Adaptor 31-808-4129 Platinum Sampler
with Nickel plated base AT7706-Pt/NiP
RF Coils
Copper 70-900-7800C
Platinum Sampler (15mm insert)
with Nickel base AT7706B-Pt/Ni
Platinum Sampler
with Nickel plated base
(Extended Life) AT7706L-Pt/NiP
Silver 70-900-7800S
Skimmer Cones
Nickel Skimmer for x-lens AT7902X-Ni
Gold 70-900-7800G Aluminium Skimmer for x-lens AT7902X-Al
Platinum Skimmer for x-lens AT7908X-Pt
RF Coil Installation Kit 70-900-7500T
Platinum Skimmer with

Nickel base for x-lens AT7908X-Pt/Ni
Cones
Sampler Cones
Nickel Sampler AT7701-Ni
Nickel Skimmer for s-lens AT7702S-Ni
Copper Skimmer AT7702S-Cu
Platinum Skimmer for s-lens AT7708S-Pt

Nickel Sampler
with Nickel plated base AT7701-Ni/Ni
Nickel base for s-lens AT7708S-Pt/Ni
17
Cones (continued) Autosampler Probes (See page 15 for complete list of probes)
Cone Options For Agilent® I-AS

Skimmer Cone Guard 70-803-1004 PTFE Encapsulated Carbon Fibre Probe
0.25mm ID 60-703-1010
Graphite Gasket (PKT 3) AT7703
PTFE Encapsulated Carbon Fibre Probe
Long Life Shield Plate AT5004
0.3mm ID 60-703-1009
For Cetac ASX-200/500/800 Series

Common Accessories Polyimide sheathed Autosampler Probe
0.5mm ID 60-808-1186L
Elegra Argon Humidifier PTFE Encapsulated Carbon Fibre Probe

0.5mm ID 70-803-0784
Elegra Dual Two-channel
Argon Humidifier 70-803-1273 PTFE Encapsulated Carbon Fibre Probe
0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
For SPS 3/SPS 4

0.75mm ID 70-803-0908
1.0mm ID 70-803-0853
Elegra Stand 70-803-1581
Guardian In-Line Filters

Guardian DC in-line non-return
gas filter 70-803-1942
Guardian in-line sample filter 70-803-1108
Trident Internal Standard Kits

Trident CT Standard Kit 60-703-1179
Standard Kit for HF 60-808-1150
18
Glass DC Nebulizers Spray Chambers

Hydride Kit KT-1168
MicroMist
*Twister
Conikal
SeaSpray *Cinnabar
1mL/min uptake A13-1-QSS1 20mL Cyclonic with Aux. 20-809-2575HE
Quartz Scott Style

For 7900 UHMI 20-809-4144
OpalMist Spray Chambers for HF
200µL/min uptake A13-1-PFA02X *Tracey PFA44
100µL/min uptake A13-1-PFA01Q 44ml Cyclonic with Aux. 20-809-2578
50µL/min uptake A13-1-PFA005Q Spray Chamber Adaptor KT-1104

MicroMist HE
Torches
Quartz Torches
Peltier Controlled Cyclonic Spray Chambers with 1.5mm Injector 30-807-0557
Torch Options
Quartz Torch Bonnet 31-808-2577
Spray Chambers Dilution Port 31-808-3217
Single-Cell Spray Chamber Kit
High Sensitivity Single-Cell Sample Straight Quartz Connector 31-808-3288
Introduction System KT-1155 Clamp (PKT 2) 70-803-0846
19
Semi-Demountable Torch Sampler Cones (continued)

with 2.4mm Quartz Injector 30-808-3853 Aluminium Sampler AT7701-Al
Torch Options
Injector 31-808-4168 Platinum Sampler AT7706-Pt
2.4mm Tapered Alumina Platinum Sampler
Injector 31-808-3855 (18 mm Insert) AT7706A-Pt
2.4mm Sapphire Capillary Platinum Sampler
Injector 31-808-4159 Boron Free AT7706-Pt-BF
Injector Adaptor 31-808-4129
Platinum Sampler
RF Coils
Copper 70-900-7800C
Platinum Sampler
Silver 70-900-7800S
Skimmer Cones
Gold 70-900-7800G Aluminium Skimmer for x-lens AT7902X-Al


Cones
Sampler Cones
Nickel Skimmer for s-lens AT8902S-Ni
Copper Skimmer for s-lens AT8902S-Cu
Platinum Skimmer for s-lens AT8908S-Pt/Cu

Nickel Sampler
Nickel base for s-lens AT8908M-Pt/Ni

Nickel base for m-lens AT8908M-Pt/Ni
20
Cones (continued) Autosampler Probes (See page 15 for complete list of probes)
Cone Options For Agilent® I-AS

Skimmer Cone Guard 70-803-1004 PTFE Encapsulated Carbon Fibre Probe
0.25mm ID 60-703-1010
0.3mm ID 60-703-1009

Common Accessories
Polyimide sheathed Autosampler Probe
0.5mm ID 60-808-1186L
Elegra Argon Humidifier
0.5mm ID 70-803-0784
Argon Humidifier 70-803-1273
0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
For SPS 3/SPS 4

0.75mm ID 70-803-0908
1.0mm ID 70-803-0853


21
Agilent® ICP-MS: 7800/7850

Hydride Kit KT-1168
MicroMist
*Twister
*Cinnabar
Conikal
Spray Chambers for HF
SeaSpray
*Tracey PFA44
44ml Cyclonic with Aux. 20-809-2578
Spray Chamber Adaptor KT-1104

OpalMist
400µL/min uptake A13-1-PFA04X Torches
Quartz Torches
100µL/min uptake A13-1-PFA01Q
DC Nebulizers for Single Cell with 2.5mm Injector 30-807-0556
MicroMist HE Torch Options

200µL/min uptake C13-1-UFT02 Quartz Torch Bonnet 31-808-2577
Peltier Controlled Cyclonic Spray Chambers Straight Quartz Connector 31-808-3288

Clamp (PKT 2) 70-803-0846
Quartz Spray Chamber KT-1116Q Semi-Demountable Torch
PFA Spray Chamber KT-1116P with 2.4mm Quartz Injector 30-808-3853
Torch Options
Spray Chambers
Injector 31-808-4168
2.4mm Tapered Alumina
2.4mm Sapphire Capillary
22
RF Coils Cones (continued)
Copper 70-900-7800C Sampler Cones (continued)

Platinum Sampler
Silver 70-900-7800S Platinum Sampler

with solid Nickel base AT7706-Pt/Ni
Platinum Sampler
Gold 70-900-7800G
Skimmer Cones
Aluminium Skimmer for x-lens AT7702X-Al
Cones
Sampler Cones Nickel base for x-lens AT7708X-Pt/Ni
Nickel Sampler AT7701-Ni Platinum Skimmer with
Boron Free for x-lens AT7708X-Pt-BF
Cone Options
Skimmer Cone Guard 70-803-1008
Nickel Sampler Graphite Gasket (PKT 3) AT7703
Aluminium Sampler AT7701-Al
Platinum Sampler AT7706-Pt
Platinum Sampler
(18 mm Insert) AT7706A-Pt
Platinum Sampler
Boron Free AT7706-Pt-BF
23
Common Accessories Autosampler Probes (See page 15 for complete list of probes)
Elegra Argon Humidifier For Agilent® I-AS

Elegra Dual Two-channel PTFE Encapsulated Carbon Fibre Probe
Argon Humidifier 70-803-1273 0.25mm ID 60-703-1010
0.3mm ID 60-703-1009

0.5mm ID 60-808-1186L
0.5mm ID 70-803-0784
Elegra Stand 70-803-1581 PTFE Encapsulated Carbon Fibre Probe
0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
For SPS 3/SPS 4

Guardian In-Line Filters 0.75mm ID 70-803-0908
Guardian DC in-line non-return PTFE Encapsulated Carbon Fibre Probe
gas filter 70-803-1942 1.0mm ID 70-803-0853

24

Hydride Kit KT-1168
MicroMist
200µL/min uptake A13-1-UM02X *Twister
100µL/min uptake A13-1-UM01Q 50mL Cyclonic with Aux. 20-809-2574HE
Conikal *Cinnabar
1mL/min uptake A13-1-UC1X 20mL Cyclonic with Aux. 20-809-2575HE
SeaSpray
*Tracey PFA44
44ml Cyclonic with Aux. 20-809-2578
Spray Chamber Adaptor KT-1104
DC Nebulizers for HF *Requires adaptor KT-1104.
OpalMist
400µL/min uptake A13-1-PFA04X Torches
Quartz Torches
DC Nebulizers for Single Cell with 2.5mm Injector 30-807-0556
MicroMist HE Torch Options

200µL/min uptake C13-1-UFT02 Quartz Torch Bonnet 31-808-2577
Peltier Controlled Cyclonic Spray Chambers Straight Quartz Connector 31-808-3288
Clamp (PKT 2) 70-803-0846
Semi-Demountable Torch
with 2.4mm Quartz Injector 30-808-3853
Torch Options
Spray Chambers Semi-Demountable Torch body 31-808-3857
Single-Cell Spray Chamber Kit Injector 31-808-4168
High Sensitivity Single-Cell Sample 2.4mm Tapered Alumina
Introduction System KT-1155 Injector 31-808-3855
2.4mm Sapphire Capillary
25
RF Coils Cones (continued)
Copper 70-900-7700C Sampler Cones (continued)

Platinum Sampler
with solid Nickel base AT7706-Pt/Ni

Platinum Sampler
Silver 70-900-7700S with Nickel plated base
Skimmer Cones
Aluminium Skimmer for x-lens AT7702X-Al
Gold 70-900-7700G


Boron Free for x-lens AT7708X-Pt-BF
Cones Nickel Skimmer for s-lens AT7702S-Ni
Platinum Skimmer for s-lens AT7708S-Pt

Sampler Cones
Nickel base for s-lens AT7708S-Pt/Ni
Cone Options
Skimmer Cone Guard
Nickel Sampler
for x-lens 70-803-1008
Skimmer Cone Guard
for s-lens 70-803-1004
Retaining Ring AT7704
Aluminium Sampler AT7701-Al
Platinum Sampler AT7706-Pt
Platinum Sampler
(18 mm Insert) AT7706A-Pt
Platinum Sampler
Boron Free AT7706-Pt-BF
Platinum Sampler
26
Common Accessories Autosampler Probes (See page 15 for complete list of probes)
Elegra Argon Humidifier For Agilent® I-AS

Elegra Dual Two-channel PTFE Encapsulated Carbon Fibre Probe
Argon Humidifier 70-803-1273 0.25mm ID 60-703-1010
0.3mm ID 60-703-1009

0.5mm ID 60-808-1186L
0.5mm ID 70-803-0784
Elegra Stand 70-803-1581 PTFE Encapsulated Carbon Fibre Probe
0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
For SPS 3/SPS 4

Guardian In-Line Filters 0.75mm ID 70-803-0908
Guardian DC in-line non-return PTFE Encapsulated Carbon Fibre Probe
gas filter 70-803-1942 1.0mm ID 70-803-0853

27
Agilent® ICP-OES: 5000 Series

SeaSpray Twister
2mL/min uptake A13-07-USS2 50mL Cyclonic 20-809-9199HE
400µL/min uptake A13-07-USS04
MicroMist
400µL/min uptake A13-07-UM04
Conikal
Tracey
2mL/min uptake A13-07-UC2
50mL Cyclonic 20-808-8882HE
Slurry
4mL/min uptake A13-07-US6
DuraMist Pneumatic Nebulization Spray
1mL/min uptake A13-07-DM1 Chamber
400µL/min uptake A13-07-DM04 Hydride Kit KT-1157
OpalMist
2mL/min uptake A13-07-PFA2
600µL/min uptake A13-07-PFA06
100µL/min uptake A13-07-PFA01 Twister TFE Spray Chamber
50µL/min uptake A13-07-PFA005 50mL Cyclonic 20-809-3452
VeeSpray
0.6 - 3mL/min uptake A13-07-CV6
Tracey TFE Spray Chamber

50mL Cyclonic 20-809-2507
IsoMist XR
Programmable Temperature
Cyclonic Spray Chamber
Glass Spray Chamber KT-1137-XR
Quartz Spray Chamber KT-1137Q-XR
PFA Spray Chamber KT-1137P-XR
28
Agilent® ICP-OES: 5000 Series
Torches Common Accessories

D-Torch Elegra Argon Humidifier
SVDV/VDV 30-808-3560 Elegra Argon Humidifier 70-803-1268
Comprises:
Base and Inner Tube 31-808-3568
Quartz Outer Tube 31-808-3570
Retaining Ring 31-808-3566
Injector Ferrule 31-808-2962

RV 30-808-3590
Comprises:
Retaining Ring 31-808-3566 Trident CT Standard Kit 60-703-1179
Injector Ferrule 31-808-2962 Standard Kit for HF 60-808-1150
D-Torch Options:
Ceramic Outer Tube
for SVDV/VDV 31-808-3580
Ceramic Outer Tube for RV 31-808-3586
Quartz Outer Tube
Autosampler Probes (See page 15 for complete list of probes)
for SVDV/VDV 31-808-3570
Quartz Outer Tube for RV 31-808-3582
O-ring Kit 70-803-1500
0.5mm ID 60-808-1186L
Ignition Enhancer 31-808-4020
0.5mm ID 70-803-0784
Quartz Torch PTFE Encapsulated Carbon Fibre Probe
SVDV/VDV 31-808-3557 0.75mm ID 70-803-1443
RV 31-808-3556 PTFE Encapsulated Carbon Fibre Probe

1.0mm ID 70-803-0793
Tapered Injectors For SPS 3/SPS 4

Quartz Injector 0.8mm 31-808-3738 PTFE Encapsulated Carbon Fibre Probe
0.75mm ID 70-803-0908
Quartz Injector 1.4mm 31-808-3583
Quartz Injector 1.8mm 31-808-3576 1.0mm ID 70-803-0853
Alumina Injector 1.5mm 31-808-3727
RF Coils
Silver 70-900-5100S
Gold 70-900-5100G
RF Coil Installation Kit 70-803-1415
29
PerkinElmer® ICP-MS: NexION 5000

SeaSpray Twinnabar
1mL/min uptake A23-1-USS1
400µL/min uptake A23-1-USS04 Cinnabar
MicroMist 20mL Cyclonic 20-809-4480HE
50µL/min uptake A23-1-UM005 Introduction System KT-1184
Torches
SeaSpray
D-Torch 30-808-3927
Comprises:
OpalMist Injector Ferrule 31-808-2962
400µL/min uptake A23-1-PFA04 Fastener Assembly 31-808-4130
100µL/min uptake A23-1-PFA01 Quartz Injectors
Tapered 1.0mm 31-808-3423
Tapered 1.5mm 31-808-4004
DC Nebulizers for Single Cell Tapered 1.8mm 31-808-4005
Tapered 2.0mm 31-808-4006
MicroMist HE Tapered 2.5mm 31-808-3302
HF Resistant Injectors
Tapered Alumina 2.4mm 31-808-3205
Sapphire 2.4mm 31-808-3378
Spray Chambers
Twister
With Matrix Port
Tracey
30
PerkinElmer® ICP-MS: NexION 5000
Cones Common Accessories

Sampler Cones Elegra Argon Humidifier
Nickel Sampler PE3011-Ni Elegra Dual Two-channel
Platinum Sampler PE3013-Pt

Platinum Sampler (18mm) PE3013A-Pt
Platinum Sampler
Boron Free PE3013-Pt-BF
Skimmer Cones Guardian in-line sample filter 70-803-1108
Nickel Skimmer PE4012-Ni Fitting only connects to 1.3mm and 1.6mm
Platinum Skimmer PE4014-Pt Autosampler Tubing
Nickel Hyper Skimmer PE4015-Ni

O-ring for NexION Hyper Trident CT Standard Kit 60-703-1179
Skimmer Cone (pack of 5) PE5125 Standard Kit for HF 60-808-1150
ConeGuard Thread Protectors Suitable for Cetac ASX-200/500/800

Sampler Cone Guard 70-803-1024 Series and PerkinElmer S20 Series
For NexION Polyimide sheathed Autosampler Probe
0.5mm ID 60-808-1186L
0.5mm ID 70-803-0784
0.75mm ID 70-803-1443
Gasket for Sampler Cone 1.0mm ID 70-803-0793
(pack of 5) PE5111
31
PerkinElmer® ICP-MS: NexION 1000/2000

SeaSpray Twinnabar
1mL/min uptake A23-1-USS1
400µL/min uptake A23-1-USS04 Cinnabar
MicroMist 20mL Cyclonic 20-809-4480HE
100µL/min uptake A23-1-UM01 Single-Cell Spray Chamber Kit
50µL/min uptake A23-1-UM005 High Sensitivity Single-Cell Sample
SeaSpray
Torches
D-Torch 30-808-3927
Comprises:
DC Nebulizers for HF Retaining Ring 31-808-2818
OpalMist
400µL/min uptake A23-1-PFA04 Injector Ferrule 31-808-2962
200µL/min uptake A23-1-PFA02 Fastener Assembly 31-808-4130

50µL/min uptake A23-1-PFA005 Quartz Injectors
Tapered 1.0mm 31-808-3423
DC Nebulizers for Single Cell Tapered 1.5mm 31-808-4004

Tapered 1.8mm 31-808-4005
MicroMist HE Tapered 2.0mm 31-808-4006
200µL/min uptake C23-1-UFT02 Tapered 2.5mm 31-808-3302
Tapered Alumina 2.4mm 31-808-3205
Spray Chambers Sapphire 2.4mm 31-808-3378
Twister
With Matrix Port
Tracey
32
Cones Common Accessories

Sampler Cones Elegra Argon Humidifier
Nickel Sampler PE3011-Ni Elegra Dual Two-channel
Aluminium Sampler PE3011-Al

Platinum Sampler (18mm) PE3013A-Pt
Platinum Sampler Guardian DC in-line non-return
Boron Free PE3013-Pt-BF gas filter 70-803-1942
Skimmer Cones
Fitting only connects to 1.3mm and 1.6mm
Nickel Skimmer PE3012-Ni
Autosampler Tubing

Aluminium Skimmer PE3012-Al
Platinum Skimmer PE3014-Pt
Platinum Skimmer
Boron Free PE3014-Pt-BF
Hyper Skimmer PE3015-Al

Platinum Hyper Skimmer PE3015-Pt/Ni
Suitable for Cetac ASX-200/500/800

O-ring for NexION Hyper
Series and PerkinElmer S20 Series
Skimmer Cone (pack of 5) PE5115
0.5mm ID 60-808-1186L
Screw for NexION Hyper
Skimmer Cone (pack of 2) PE5116 0.5mm ID 70-803-0784
ConeGuard Thread Protectors 0.75mm ID 70-803-1443
Sampler Cone Guard 70-803-1024 PTFE Encapsulated Carbon Fibre Probe
For NexION 1.0mm ID 70-803-0793

For NexION
Gasket for Sampler Cone

(pack of 5) PE5111
33
Glass DC Nebulizers Spray Chambers for HF

SeaSpray Cinnabar
MicroMist
Tracey PFA44
100µL/min uptake A22-1-UM01 44mL Cyclonic 20-809-3713
OpalMist
400µL/min uptake A22-1-PFA04 Introduction System KT-1204
Torches
D-Torch 30-807-0540
Comprises:
MicroMist HE Base and Inner Tube 31-808-2847
200µL/min uptake C22-1-UFT02 Quartz Outer Tube 31-808-2848
D-Torch for HF 30-808-2937
IsoMist XR Comprises:
Ceramic Outer Tube 31-808-2849
Glass Spray chamber KT-1096-XR Retaining Ring 31-808-2818
Quartz spray chamber KT-1096Q-XR D-Torch Options:

PFA spray chamber KT-1096P-XR Quartz Outer Tube 31-808-2848
Twinnabar spray chamber KT-1096T-XR

Spray Chambers
Quartz Torch
Twister Standard Quartz Torch 30-808-8107
50mL Cyclonic High Efficiency Quartz Torch 31-808-2784
(2.4mm Aux. Port)
90deg Screw Mount 20-809-3854HE
Quartz Injectors (non DRC)
Twister
Tapered Quartz Injector 1.0mm 31-808-0370
50mL Cyclonic
with Screw Mount 20-809-3892HE Tapered Quartz Injector 1.2mm 31-808-0789
Twinnabar
These injectors are compatible with both
D-Torch and standard torch. They are suitable
for torch adaptor 31-808-2825.
34
Quartz Injectors (DRC Versions) Skimmer Cones

Tapered Quartz Injector Nickel Skimmer PE3012-Ni
with Ball Joint, 0.85mm 31-808-3125
Tapered Quartz Injector
Aluminium Skimmer PE3012-Al
with Ball Joint, 2.0mm 31-808-0806 Platinum Skimmer PE3014-Pt

D-Torch and standard torch. They are suitable Platinum Skimmer
for torch adaptor 31-808-2824. Boron free PE3014-Pt-BF
Hyper Skimmer PE3015-Al

Platinum Hyper Skimmer PE3015-Pt/Ni
Tapered Alumina Injector 1.5mm 31-807-0044
Sapphire Injector 2.0mm 31-808-2803 O-ring for NexION Hyper
Platinum Injector 2.0mm 31-808-2972 Skimmer Cone (pack of 5) PE5115

D-Torch and standard torch. They are suitable Screw for NexION Hyper
for torch adaptor 31-808-2825. Skimmer Cone (pack of 2) PE5116
Torch Adaptor ConeGuard Thread Protectors

Cassette Mount Adaptor Sampler Cone Guard 70-803-1024
for Ball Joint Injector 31-808-2824 For NexION 300/350
This adaptor is suitable for injectors with
a ball joint.
Torch Adaptor
PFA Cassette Mount Adaptor 31-808-2825
This adaptor is suitable for injectors without a For NexION 300/350
ball joint.
Cones
Sampler Cones (pack of 5) PE5111
Nickel Sampler PE3011-Ni
RF Coils
Aluminium Sampler PE3011-Al
Copper 70-900-2006C
Platinum Sampler RF Coil Installation Kit 70-900-2006T

Boron free PE3013-Pt-BF
35
Common Accessories

Fitting only connects to 1.3mm and 1.6mm
Autosampler Tubing

Standard Kit for HF solutions 60-808-1150
Suitable for Cetac ASX-200/500/800

Series
0.5mm ID 60-808-1186L
0.5mm ID 70-803-0784
0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
Suitable for PE S10 or AS93+

0.25mm ID 70-803-1071
0.5mm ID 70-803-1440
1.0mm ID 70-803-0816
36
PerkinElmer® ICP-OES: Avio 200/500

SeaSpray Twister
MicroMist
100µL/min uptake A21-07-UM01 Tracey
50µL/min uptake A21-07-UM005 50mL Cyclonic 20-808-8882HE
Slurry
Conikal
1mL/min uptake A21-07-UC1 Cinnabar
DuraMist
1mL/min uptake A21-07-DM1
400µL/min uptake A21-07-DM04
Twinnabar
OpalMist
Pneumatic Nebulization Spray
Chamber
VeeSpray
Hydride Kit KT-1157
0.6-3mL/min uptake A21-07-CV6
IsoMist XR Twister TFE

Tracey TFE
37
PerkinElmer® ICP-OES: Avio 200/500

D-Torch for Avio 200 Elegra Argon Humidifier
D-Torch 30-808-3800 Elegra Argon Humidifier 70-803-1269
Comprises:
D-Torch Options:
Injector Adapter 31-808-3782 Guardian In-Line Filters
Viton O-Rings (Pkt 10) 70-803-1576 Guardian DC in-line non-return
D-Torch for Avio 500 Guardian in-line sample filter 70-803-1108
D-Torch 30-808-3882 Fitting only connects to 1.3mm and 1.6mm
Autosampler Tubing
Comprises:
D-Torch Options:
Injector Adapter 31-808-3782
Viton O-Rings (Pkt 10) 70-803-1576

Tapered Injectors for D-Torch
Quartz Injector 0.8mm 31-808-3785 Suitable for Cetac ASX-200/500/800
Quartz Injector 1.2mm 31-808-3786 Series
0.5mm ID 60-808-1186L
Alumina Injector 1.25mm 31-808-3799 PTFE Encapsulated Carbon Fibre Probe
Alumina Injector 2.0mm 31-808-3783 0.75mm ID 70-803-1443
Capillary Injectors for D-Torch 1.0mm ID 70-803-0793
Quartz Injector 1.2mm 31-808-3787 Suitable for PE S10 or AS93+
Sapphire Injector 2.0mm 31-808-3784 PTFE Encapsulated Carbon Fibre Probe
0.25mm ID 70-803-1071
Fixed Torch for Avio 200/500 PTFE Encapsulated Carbon Fibre Probe
Quartz Torch with single slot 31-808-3776 0.5mm ID 70-803-1440
Quartz Torch with 3 slots 31-808-4233 PTFE Encapsulated Carbon Fibre Probe
1.0mm ID 70-803-0816
38
PerkinElmer® ICP-OES: Optima 8000, 8300 DV Series

SeaSpray Tracey
MicroMist
Twister
50mL Cyclonic (Aqueous) 20-809-0208HE
Conikal With 7mm baffle
Slurry
Twister
50mL Cyclonic (Organics) 20-809-0446HE
DC Nebulizers for HF With 4mm baffle
DuraMist
Twister
50mL Cyclonic (Aux. Port) 20-809-0004HE
OpalMist
Cinnabar
VeeSpray Pneumatic Nebulization Spray
0.6 - 3mL/min uptake A21-07-CV6 Chamber
HydraMist Kit KT-1162
IsoMist XR Spray Chambers for HF
Programmable Temperature Tracey TFE

Cyclonic Spray Chamber 50mL Cyclonic 20-809-2510
Glass spray chamber KT-1012-XR Plugs directly into cassette mount
PFA spray chamber KT-1012P-XR
39
PerkinElmer® ICP-OES: Optima 8000, 8300 DV Series

D-Torch 30-808-3300 Elegra Argon Humidifier
Elegra Argon Humidifier 70-803-1269
Comprises:
D-Torch Options
Quartz Outer Tube (No Slot) 31-808-3407
Copper Foils (PKT 12)
for Cermic Outer Tube 31-808-3356 Guardian DC in-line non-return
Quartz Torch Guardian in-line sample filter 70-803-1108
Without slots 31-808-3254 Fitting only connects to 1.3mm and 1.6mm
With single slot 31-808-3255 Autosampler Tubing
With 3 slots 31-808-3256

Quartz Torch Options:
Copper Foil for Quartz Torch
or D-Torch Quartz Standard Kit for HF solutions 60-808-1150
Outer Tube (pack of 12) 31-808-3289
Tapered Quartz Injectors

Quartz Injector 2.5mm 31-808-3730 Suitable for Cetac ASX-200/500/800
Quartz Injector 3.0mm 31-808-3259 Series
Alumina Injector 1.2mm 31-808-3287 Polyimide sheathed Autosampler Probe
0.5mm ID 60-808-1186L
0.5mm ID 70-803-0784
Sapphire Injectors
Sapphire Injector 2mm 31-808-3528 0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
Purge Windows
Suitable for PE S10 or AS93+
Axial 17mm disk 31-808-0551
Axial 32mm disk 31-808-2649
0.25mm ID 70-803-1071
Radial (Post Nov. 2004) 31-808-2788
0.5mm ID 70-803-1440
1.0mm ID 70-803-0816
40
Shimadzu® ICP-MS: 2030

Conikal Glass
1mL/min uptake A41-1-UC1S 50mL Cyclonic 21-809-3994
With B14 gravity drain
SeaSpray
Slurry
MicroMist
600µL/min uptake A41-07-UM06S Quartz
200µL/min uptake A41-07-UM02 50mL Cyclonic 21-809-3992
100µL/min uptake A41-07-UM01 With B14 gravity drain
SeaSpray
1mL/min uptake A41-1-QSS1 Drain Device 21-808-8214
DC Nebulizers Compatible with HF
OpalMist
1mL/min uptake A41-1-PFA1S Extention Pipe
Glass Extention w/ right angle 31-808-3920
Spray Chambers Compatible with HF
PFA
DuraMist
1mL/min uptake A41-1-DM1S
VeeSpray
HF Drain Device 21-809-2540
Extention Pipe
PFA Extention w/ right angle 21-809-4081
41
Shimadzu® ICP-MS: 2030
Torches Cones (continued)
Quartz Torches Skimmer Cones

Quartz Mini Torch 30-807-0567 Copper Skimmer SZ7002-Cu
(Suitable for ICP-MS 2030)
Torch with 1.2mm Injector 30-808-9986
(Suitable for ICP-MS 8500) Nickel Skimmer SZ7002-Ni
Torch with 1.5mm Injector 30-808-1090
(Suitable for ICP-MS 8500)
Quartz Sleeve for Mini Torch 31-808-4214
(Suitable for ICP-MS 2030) Nickel Skimmer with
Copper Base SZ7002-Ni/Cu
RF Coils
Platinum Skimmer SZ7004-Pt/Cu
Copper 70-900-6000C Screw Kit for Skimmer Cone
Silver 70-900-6000S (PKT 2) SZ5002
Gold 70-900-6000G Cone Extraction Tool 70-803-1573
RF Coil Installation Kit

Common Accessories
Cones Elegra Argon Humidifier

Sampler Cones
Copper Sampler SZ7001-Cu
Nickel Sampler SZ7001-Ni

Nickel Sampler with Guardian in-line sample filter 70-803-1108
Copper Base SZ7001-Ni/Cu
Platinum Sampler
(10mm Insert) SZ7003-Pt/Cu Standard Kit for HF 60-808-1150
Platinum Sampler
(15mm Insert) SZ7003A-Pt/Cu
(PKT 3) SZ5001 For Shimadzu® ASC-6100F/9800
Screw Kit for Sampler Cone PTFE Sheathed Carbon Fibre Probe
0.3mm ID with UniFit 70-803-1200
(PKT 4) SZ5004
For Shimadzu® AS10
PTFE Sheathed Carbon Fibre Probe
O-Ring Kit 70-803-1908
42
Shimadzu® ICP-OES: ICPE-9000/9800 & ICPS-7500/8100

Conikal Tracey
1mL/min uptake A41-1-UC1S 50mL Cyclonic 20-808-8881HE
SeaSpray
2mL/min uptake A41-1-USS2S
Slurry
MicroMist Twister
600µL/min uptake A41-07-UM06S 50mL Cyclonic 20-809-9119HE
200µL/min uptake A41-07-UM02 With B14 gravity drain
Twister
OpalMist 50mL Cyclonic 20-809-0222HE
1mL/min uptake A41-07-PFA1S
600µL/min uptake A41-07-PFA06S
Cinnabar
DuraMist 20mL Cyclonic 20-809-0164HE
1mL/min uptake A41-07-DM1S
VeeSpray

Pneumatic Nebulization Spray
Chamber
Hydride Kit KT-1157
IsoMist XR
Glass spray chamber KT-1067-XR
Quartz spray chamber KT-1067Q-XR
Drain Device 21-808-8214
Transfer Tube, Spray Chamber to

ICPE-9000/9800 Torch
Glass Transfer Tube 86mm 21-809-2846
43
Shimadzu® ICP-OES: ICPE- 9000/9800 & ICPS-7500/8100
Spray Chambers for HF Torches

Tracey TFE D-Torch 30-808-3910
50mL Cyclonic 20-809-2508 Suitable for ICPE-9000/9800
Suitable for use with HF Comprises:
Torch Body 31-808-3998
Torch Adaptor 31-808-3072
Injector Ferrule 6.0mm 31-808-2962
HF Drain Device 21-809-2540 Outer Tube Retainer 31-808-2818
GazFit Connectors (PKT 4)
for 4mm OD side arms GAZ-04
D-Torch Options:
Tapered Injectors for D-Torch

Mounting bracket for Alumina Injector 1.5mm 31-808-3964
HF Spray Chamber 21-809-2839
Quartz Torches
Quartz Torch Standard
1.5mm Injector
Transfer Tube, Spray Chamber to (Suitable for 7500/8100) 30-808-1179
ICPE-9000/9800 Torch
Quartz Torch for Organics,
PFA Transfer Tube 82.5mm 31-808-3071
1.0mm Injector (Suitable for
7500/8100/9000/9800) 30-807-0519
Quartz Torch for High TDS,
Torches 1.8mm Injector (Suitable for
7500/8100/9000/9800) 30-807-0518
Semi Demountable Quartz Torch for High TDS,

Torch (HF) 30-808-8039 2.0mm Injector (Suitable for
7500/8100/9000/9800) 30-807-0564
Suitable for ICPS-7500/8100 and
ICPE-9000/9800 Quartz Mini Torch 1.5mm Injector
(Suitable for ICPE-9000/9800) 30-807-0534
Comprises:
Torch Body 31-808-1258
Torch Adaptor 31-808-1260
Joint Clip 14/23 KCP-14
GazFit Connectors (PKT 4)
for 4mm OD side arms GAZ-04
Injectors for Semi Demountable

Torch
Sapphire Injector 2.0mm 31-808-3001
44
Shimadzu® ICP-OES: ICPE-9000/9800 & ICPS-7500/8100
RF Coils
Copper 70-900-6100C
Silver 70-900-6100S
Gold 70-900-6100G
Common Accessories


For Shimadzu® ASC-6100F/9800

PTFE Sheathed Carbon Fibre Probe
For Shimadzu® AS10
PTFE Coated Vitcon O-rings
(PKT 10) With UniFit 70-803-1477
45
Spectro™ ICP-OES: Arcos II EOP, Blue EOP/TI & Green TI

2mL/min uptake A21-1-USS2 Pneumatic Nebulization Spray Chamber
Hydride Kit KT-1160
MicroMist
Slurry
4mL/min uptake A21-1-US6 Quartz Adaptor 21-809-3772
Conikal
Quartz Adaptor
DC Nebulizers for HF with Aux Port 21-809-3771
DuraMist
VeeSpray Spray Chambers for HF

0.6-3mL/min uptake A21-1-CV6
Tracey TFE
Suitable for use with HF.
Requires Transfer Tube 21-809-3726.
IsoMist XR
Cyclonic Spray Chamber PuraFlex Transfer Tube 21-809-3726
For ARCOS II EOP

For Blue TI/EOP

Torches
PFA Spray Chamber KT-1141P-XR D-Torch Blue EOP 30-808-3600
D-Torch Blue TI 30-808-3629
Spray Chambers
Comprises:
Tracey Base and Inner Tube 31-808-3605
50mL Cyclonic 20-809-2665HE Quartz Outer Tube 31-808-3630

Adaptor for D-Torch B19 31-808-3651
Adaptor S19-B19-90deg 21-809-4045
Metal Ball Joint Clip JC-19
Twister
50mL Cyclonic 20-809-2951HE D-Torch Options:
Sheath Gas Adaptor 21-809-4082
Aux Gas Line 70-803-1424
Scott Spray Chamber 20-809-4053
46
Spectro™ ICP-OES: Arcos II EOP, Blue EOP/TI & Green TI
Torches (continued) Torches (continued)
Tapered Injectors Quartz Torch

for Blue EOP/TI D-Torch SpectroBlue EOP 31-808-3394
Quartz Injector 1.0mm 31-808-0009 SpectroBlue TI 31-808-3468
Quartz Injector 1.5mm 31-808-0007 Injectors for Quartz Torch
Quartz Injector 1.8mm 31-808-8146 Quartz Injector 1.2mm 31-808-3410
Alumina Injector 1.0mm 31-808-0835 Alumina Injector 1.8mm 31-808-3409
Alumina Injector 1.5mm 31-808-0013 Alumina Injector 2.5mm 31-808-3390
Alumina Injector 2.4mm 31-808-0385 Common Accessories
Capillary Injectors Elegra Argon Humidifier

for Blue EOP/TI D-Torch Elegra Argon Humidifier 70-803-1269
D-Torch
ARCOS II EOP 30-808-3657
Comprises:
Adaptor for D-Torch B19 31-808-3651
Adaptor S19-B19-90deg 21-809-4045
Metal Ball Joint Clip JC-19 gas filter 70-803-1942
D-Torch Options: Guardian in-line sample filter 70-803-1108
Adaptor S19-B13-90deg 21-809-4048 Trident Internal Standard Kits
Adaptor assembly 21-809-4223
Tapered Injectors
for ARCOS II EOP D-Torch
Quartz Injector 2.5mm 31-808-3676 Autosampler Probes (See page 15 for complete list of probes)
Alumina Injector 2.4mm 31-808-3700 For Cetac ASX-200/500/800 Series
0.5mm ID 60-808-1186L
Capillary Injectors
for ARCOS II EOP D-Torch PTFE Encapsulated Carbon Fibre Probe
0.5mm ID 70-803-0784
Sapphire Injector 2.4mm 31-808-3850 0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
47
Spectro™ ICP-OES: Arcos II SOP, Blue SOP & Green SOP/DSOI

SeaSpray Tracey
MicroMist
Slurry
Conikal Twister
2mL/min uptake A21-1-UC2 50mL Cyclonic 20-809-2951HE
DuraMist

VeeSpray Pneumatic Nebulization Spray Chamber
0.6-3mL/min uptake A21-1-CV6 Hydride Kit KT-1160
Straight Quartz Adaptor 21-809-3773
IsoMist XR
For ARCOS II SOP Straight Quartz Adapter

Glass Spray Chamber KT-1154-XR with Aux Port 21-809-3804
For Blue SOP
Glass Spray Chamber KT-1141-XR Tracey TFE
Quartz Spray Chamber KT-1141Q-XR 50mL Cyclonic 20-809-3717
PFA Spray Chamber KT-1141P-XR Suitable for use with HF.
Requires Transfer Tube 21-809-3727
Straight HF Resistant
Adaptor 21-809-3727
48
Spectro™ ICP-OES: Arcos II SOP, Blue SOP & Green SOP/DSOI
Torches Torches
D-Torch 30-808-3614 Fixed Quartz Torch
Quartz Torch 1.8mm injector
Comprises:
S19, SOP 30-808-4264
Common Accessories
Adaptor for D-Torch B19 31-808-3651 Elegra Argon Humidifier
Adaptor for D-Torch B13 31-808-3596 Elegra Argon Humidifier 70-803-1269
Metal Ball Joint Clip JC-19
Options:
Tapered Injectors
for D-Torch
Quartz Injector 2.0mm 31-808-0008 Guardian In-Line Filters
Quartz Injector 2.4mm 31-808-3541 Guardian DC in-line non-return
Alumina Injector 1.8mm 31-808-0015 Trident Internal Standard Kits
Alumina Injector 2.0mm 31-808-0027 Trident CT Standard Kit 60-703-1179
Alumina Injector 2.4mm 31-808-0385 Standard Kit for HF 60-808-1150
Capillary Injectors
for D-Torch
Quartz Torch
SpectroBlue SOP 31-808-3405
Injectors for Polyimide sheathed Autosampler Probe
Quartz Torch 0.5mm ID 60-808-1186L
0.5mm ID 70-803-0784
0.75mm ID 70-803-1443
49
Thermo® ICP-MS: Q/RQ/TQ
Glass DC Nebulizers Torches

SeaSpray Quartz Torch
400µL/min uptake A31-1-USS04X Base for Q Torch 31-808-3494
Quartz Torch Body
MicroMist for Q 31-808-3357
200µL/min uptake A31-1-UM02X Torch Options:
100µL/min uptake A31-1-UM01Q Quartz Injector 1.0mm 31-808-3440
50µL/min uptake A31-1-UM005Q Quartz Injector 2.0mm 31-808-3898

Cones
SeaSpray
1mL/min uptake A31-1-QSS1 Sampler Cones
Nickel Sampler
with Copper Core TG1021-Ni/Cu
Aluminium Sampler TG1021-Al
Platinum Sampler
DC Nebulizers for HF with Copper Core TG1026A-Pt/Cu
OpalMist
Skimmer Cones
Nickel Skimmer
200µL/min uptake A31-1-PFA02X Hot and Cold Plasma TG1035-Ni
Platinum Skimmer
50µL/min uptake A31-1-PFA005Q Hot and Cold Plasma TG1039-Pt
Nickel Skimmer
DC Nebulizers for Single Cell (High Matrix) TG1044-Ni
MicroMist HE Eliminates need for insert.

Platinum Skimmer
(High Matrix) TG1048-Pt
Eliminates need for insert.
IsoMist XR
Graphite Sampler
Glass Spray chamber KT-1027-XR
Cone Gasket TG5001
Quartz spray chamber KT-1027Q-XR
Elbow Adaptor with gas port 21-809-4155
Spray Chambers
50
Thermo® ICP-MS: Q/RQ/TQ
Common Accessories



0.5mm ID 60-808-1186L
0.5mm ID 70-803-0784
0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
51
Thermo® ICP-OES: PRO Duo

SeaSpray Tracey
MicroMist
Twister
Conikal
Straight Ball
Slurry Joint Adaptor 21-809-2723
DC Nebulizers for HF Spray Chambers for HF

DuraMist Tracey TFE
1mL/min uptake A31-07-DM1 50mL Cyclonic 20-809-9198
OpalMist
200µL/min uptake A31-07-PFA02 Torches
D-Torch 30-808-4150
Comprises:
VeeSpray Base and Inner Tube 31-808-4125
Quartz Outer Tube with slot 31-808-4152
D-Torch Options:
Ceramic Outer Tube with slot 31-808-3996
IsoMist XR
Cyclonic Spray Chamber Retaining Ring 31-808-2707
Glass Spray Chamber KT-1166-XR Injector Adaptor 31-808-2895
Spray Chambers
Hydride Kit KT-1160
52
Thermo® ICP-OES: PRO Duo
Torches Autosampler Probes (See page 15 for complete list of probes)
D-Torch For Cetac ASX-200/500/800 Series

D-Torch Options:
0.5mm ID 60-808-1186L
PTFE Coated
Viton O-rings (PKT 10) VT-007
0.5mm ID 70-803-0784
Quartz Torch PTFE Encapsulated Carbon Fibre Probe
EMT Design 31-808-4158 0.75mm ID 70-803-1443
Tapered Injectors for 1.0mm ID 70-803-0793
D-Torch & EMT Torch
Capillary Injectors for

D-Torch & EMT Torch
Common Accessories


53
Thermo® ICP-OES: PRO Radial

SeaSpray Tracey
MicroMist
Twister
Conikal
Straight Ball

DuraMist Tracey TFE
OpalMist
D-Torch 30-808-2877
VeeSpray Comprises:
D-Torch Options:
IsoMist XR Ceramic Outer Tube 31-808-3836
PTFE Coated
Glass Spray chamber KT-1166-XR Viton O-rings (PKT 10) VT-007
Viton O-rings (PKT 10) V-026
O-ring kit 70-803-1520
Spray Chambers Injector Adaptor 31-808-2895

Hydride Kit KT-1160
54
Thermo® ICP-OES: PRO Radial
Torches Autosampler Probes (See page 15 for complete list of probes)
Quartz Torch For Cetac ASX-200/500/800 Series

EMT Design 31-808-2810 Polyimide sheathed Autosampler Probe
0.5mm ID 60-808-1186L
Tapered Injectors for PTFE Encapsulated Carbon Fibre Probe

0.5mm ID 70-803-0784
D-Torch & EMT Torch
0.75mm ID 70-803-1443

D-Torch & EMT Torch
Common Accessories


55
Thermo® ICP-OES: 6000/7000 Duo

SeaSpray Tracey
MicroMist
Twister
Conikal
Adaptor
Slurry Right Angle With Ball Joint 21-809-2761
DuraMist
1mL/min uptake A31-07-DM1 Spray Chambers for HF
Tracey TFE
OpalMist
Torches
VeeSpray
0.6 - 3mL/min uptake A31-07-CV6 D-Torch 30-808-2844
Comprises:
IsoMist XR Quartz Outer Tube 31-808-2840
Cyclonic Spray Chamber D-Torch Options:
Glass Spray Chamber KT-1015-XR Ceramic Outer Tube 31-808-3834
Quartz Spray Chamber KT-1015Q-XR Optic Fibre 170mm 31-808-2933
PFA Spray Chamber KT-1015P-XR Optic Fibre 450mm 31-808-3117
Spray Chambers Injector Adaptor 31-808-2895

Thermo® Duo 7600
Hydride Kit KT-1156
Thermo Duo® 6000/7200/7400
Hydride Kit KT-1179
56
Thermo® ICP-OES: 6000/7000 Duo
Torches RF Coils
D-Torch RF Coil for 6000
Silver, Teflon Coated 70-900-4002S
D-Torch Options:
Gold, Teflon Coated 70-900-4002G
PTFE Coated
Viton O-rings (PKT 10) VT-007
RF Coil for 7000/6000 Mark II
Ceramic Outer Tube and Gold, Teflon Coated 70-900-4005G
Optic Fibre for D-Torch 31-808-3079
Comprises: RF Coil Installation Kit 70-900-4002T

Optic Fibre 170mm 31-808-2933
Optic Fibre 450mm 31-808-3117
Quartz Torch Common Accessories

EMT Design 31-808-2811
Tapered Injectors for
D-Torch & EMT Torch

D-Torch & EMT Torch
Quartz Injector 2.5mm 31-808-3246 Guardian DC in-line non-return
Quartz Injector 3.0mm 31-808-3247 gas filter 70-803-1942
Alumina Injector 1.0mm 31-808-3279 Guardian in-line sample filter 70-803-1108

Duo Periscope Window 31-808-2677
O-ring for Periscope Window
(PKT 10) 70-803-1603
Quartz Window 70-803-1116

Purged Optical Path Polyimide sheathed Autosampler Probe
(POP) Assembly 70-803-1571 0.5mm ID 60-808-1186L
Window & O-Ring for Purged PTFE Encapsulated Carbon Fibre Probe
Optical Path (POP) 70-803-1892 0.5mm ID 70-803-0784
0.75mm ID 70-803-1443
1.0mm ID 70-803-0793
57
Thermo® ICP-OES: 6000/7000 Radial

SeaSpray Tracey
MicroMist
Twister
Conikal
Straight Ball

DuraMist Tracey TFE
OpalMist
D-Torch 30-808-2877
Comprises:
VeeSpray Base and Inner Tube 31-808-2932
D-Torch Options:
IsoMist XR
Glass Spray chamber KT-1021-XR PTFE Coated
PFA spray chamber KT-1021P-XR Viton O-rings (PKT 10) VT-007
Twinnabar spray chamber KT-1021T-XR Viton O-rings (PKT 10) V-026

O-ring kit 70-803-1520
58
Thermo® ICP-OES: 6000/7000 Radial
Torches Common Accessories (continued)
Quartz Torch Trident Internal Standard Kits

EMT Design 31-808-2810 Trident CT Standard Kit 60-703-1179
Tapered Injectors for
D-Torch & EMT Torch

D-Torch & EMT Torch
Alumina Injector 1.0mm 31-808-3279 Autosampler Probes (See page 15 for complete list of probes)
0.5mm ID 60-808-1186L
RF Coils PTFE Encapsulated Carbon Fibre Probe
0.5mm ID 70-803-0784
RF Coil for 6000 Mark I
Silver, Teflon Coated 70-900-4002S 0.75mm ID 70-803-1443
Gold, Teflon Coated 70-900-4002G PTFE Encapsulated Carbon Fibre Probe
1.0mm ID 70-803-0793
RF Coil for 7000/6000 Mark II
Gold, Teflon Coated 70-900-4005G
Common Accessories

59
Fittings & Connectors - Nebulizers
DC Nebulizer Gas Fitting Connectors Sample Tube Connectors (PKT 10)

Agilent® Vista/700-ES 70-803-0969 UniFit P/N
EzyFit P/N
Agilent MP-AES
®
70-803-0969 0.25mm ID x 1.27mm OD x 700mm long NFT-025 EZT-025
Agilent® 4500/7500 70-803-1086 0.25mm ID x 1.27mm OD x 2000mm long NFT2-025 EZT2-025
Agilent 7700/7800/7900/8800/8900
®
Agilent® 5100/5110/5800/5900 70-803-1105 0.50mm ID x 1.27mm OD x 2000mm long NFT2-050 EZT2-050
Analytik Jena ICP-MS ®
Analytik Jena® ICP-OES 70-803-1105 0.75mm ID x 1.27mm OD x 2000mm long NFT2-075 EZT2-075
Horiba Jobin Yvon (All models)
®
70-803-1105 0.75mm ID x 1.27mm OD x 1500mm long NFTS-075 EZTS-075
Leeman (All models) 70-803-0969 0.07mm ID x 1/16” OD x 700mm long NFT-16-07 EZT-16-07
Nu Instruments ICP-MS 70-803-1858 0.13mm ID x 1/16” OD x 700mm long NFT-16-13 EZT-16-13
PerkinElmer Optima and Avio
®
70-803-1070 0.18mm ID x 1/16” OD x 700mm long NFT-16-18 EZT-16-18
PerkinElmer® Elan/NexION 300/350 70-803-1049 0.25mm ID x 1/16” OD x 700mm long NFT-16-25 EZT-16-25
PerkinElmer NexION 1000/2000
®
70-803-1449 0.25mm ID x 1/16” OD x 1500mm long NFTS-16-25 EZTS-16-25
Shimadzu® 9000/9800 70-803-1311 0.50mm ID x 1/16” OD x 700mm long NFT-16-50 EZT-16-50
Shimadzu 2030 ®
Spectro™ (All models) 70-803-1070 0.75mm ID x 1/16” OD x 700mm long NFT-16-75 EZT-16-75
Thermo 6000/7000/Q & X-Series
®
Thermo Neptune
®
70-803-1468 Tefzel 0.5mm ID x 1.3mm OD x 700mm long NFTFE-050 EZTFE-050
Elegra to DC Nebulizer 70-803-1278 0.3mm ID x 0.75mm OD x 700mm long NFT-0703 EZT-0703
1/4-28F to 1mm OD gas inlet 70-803-1504
LC Interface for Speciation Measurements Sample Tubing

0.25mm ID x 1.27mm OD x 10m long STT-025
The high-pressure fitting kit is a quick and easy way to ensure a leak tight
connection of 1/16” or 1.3mm OD sample capillary to a Glass Expansion 0.50mm ID x 1.27mm OD x 10m long STT-050
concentric nebulizer such as the SeaSpray, Conikal, MicroMist, DuraMist or 0.75mm ID x 1.27mm OD x 10m long STT-075
OpalMist nebulizers. If you need to make a leak tight seal to your nebulizer
- whether it is to a HPLC for speciation or a high throughput switching valve 0.25mm ID x 1/16” OD x 10m long STT-16-25
use this kit. 0.50mm ID x 1/16” OD x 10m long STT-16-50
High Pressure nebulizer fitting kit FT-16-8-X 0.75mm ID x 1/16” OD x 10m long STT-16-75
Tefzel Ferrule 1/8 inch (PKT 10) 70-803-1513 1.0mm ID x 1/16” OD x 10m long STT-16-100
Tefzel Ferrule 1/16 inch (PKT 10) 70-803-1315 0.3mm ID x 0.75mm OD x 10m long STT-0703
0.13mm ID x 1.27mm OD x 10m long PFT-013
EzyLok Kit for Nebulizer Gas Side Arm 0.18mm ID x 1.27mm OD x 10m long PFT-018
0.07mm ID x 1/16” OD x 10m long PFT-16-07
EzyLok Kit EL-1
0.13mm ID x 1/16” OD x 10m long PFT-16-13
Comprises: 0.18mm ID x 1/16” OD x 10m long PFT-16-18
EzyLok Connector for 4mm Tubing QSM-4
1/8” ID x 1/4” OD x 1m long 1/4PFA-HW
EzyLok 6mm Hose Adaptor 70-808-0735
Tefzel 0.5mm ID x 1.3mm OD x 10m long TFE-050
Hose Clip, 6mm SNP-1
Other Tubing
Reagent tube 1.6mm OD x 1.0mm ID x 1400mm long
with PTFE Sinker (PKT. 3) 70-803-0752
Tubing Connector Tygon Tubing 1/4 inch x 1m 1921-1M

Tygon Tubing 700mm 70-803-0598
1.3mm to 1/16 inch FT-16-1.3
1/16 inch to 1/16 inch FT-16-1.6
60
Fittings & Connectors - Spray Chambers & Torches
Helix & Helix CT Spray Chambers Clips & Connectors for Spray Chambers
Helix CT: Metal Ball Joint Clip
(to connect spray chamber and torch) JC-13
Helix CT Locking Screw with Seal 70-803-1439
Nickel Joint Clip B14
Helix CT Locking Screw with Seal for MiraMist 70-803-1470
(to connect spray chamber and drain adaptors) KCM-14
Helix CT Seal (PKT 4) 70-803-1456
Nickel Joint Clip KCM29
Helix: (to connect spray chamber and drain adaptors) KCM-29
Helix Locking Screw 70-100-0152 UniFit Connector with sample tube,
Helix Seal (PKT 4) 70-100-0237 0.75mm ID x 1/16” OD x 700mm long (PKT 3) UFT-16-75
Nebulizer Spacer 21-100-0246 UniFit Connector with sample tube,

0.75mm ID x 1.3mm OD x 700mm long (PKT 3) UFT-075
Helix CT Locking Screw Helix CT Seal UniFit Connector with sample tube,
0.86mm ID x 2mm OD x 480mm long (PKT 3) UFT-2-86
UniFit Connector with sample tube,
0.86mm ID x 2mm OD x 700mm long (PKT 3) UFT-2-700
Connector Assembly for Agilent® Scott
Spray Chamber 70-803-1476
HydraMist Drain (PKT 4) GAZ-08-4
Helix CT Locking Screw with Seal
O-Rings Spray Chambers

O-ring set for Large Adaptor (Tracey, Twister) 70-808-0501
O-ring set for Small Adaptor (Cinnabar, Twinnabar) 21-808-0818
Teflon coated Viton O-Rings for spray chamber,
nebulizer seal (PKT 10) VT-009
Teflon coated Viton O-Rings for spray chamber,
16mm large adaptor seal (PKT 10) VT-10/2
Silicon o-rings for spray chamber, nebulizer seal (PKT 10) S-009
GazFit Connectors for Torches

UniFit Connector with sample tube Metal Ball Joint Clip JC-13
GazFit Connectors (PKT 2), for 8mm OD arm GAZ-08
GazFit Connectors (PKT 4), for 6mm OD torch side arms GAZ-06
GazFit Connectors (PKT 4), 2 for 6mm OD torch side arms,
O-Rings for Torches
2 for 4mm OD torch side arms GAZ-0604 Viton O-Rings for demountable torch ball joint connectors
GazFit Connectors (PKT 4), for 5mm OD torch side arms GAZ-05 (PKT 10) 70-V-011
GazFit Connectors (PKT 4), for 4mm OD torch side arms GAZ-04
GazFit connectors are only suitable for torches with tolerances of no more
than +/- 0.15mm on the diameter of the side arms.
All Glass Expansion torches meet this specification.
GazFit Connectors
61
Standard Peristaltic Pump Tubing
PVC Peristaltic Pump Tubing PVC, 3 Bridged, 72mm

72 72
All tubes made from Tygon R3603/R3607 or equivalent. Supplied in packs of (72mm between tags)
12 tubes.
Special Properties: Tag Colours ID (mm) P/N
• Inexpensive all-round tubing for general laboratory applications.
orange/black 0.13 0.13-OBLK3B
Advantages:
orange/red 0.19 0.19-OR3B
• Resistant to almost all inorganic materials.
• Does not age. orange/blue 0.25 0.25-OB3B
• Low gas permeability. orange/green 0.38 0.38-OG3B
• Smooth inner surface. green/yellow 0.44 0.44-GY3B
Limitations: orange/yellow 0.51 0.51-OY3B
• Potential leaching of plasticizers. white/yellow 0.57 0.57-WY3B
orange/white 0.64 0.64-OW3B
black/black 0.76 0.76-BLK3B
152
PVC, 2 Bridged, 152mm orange/orange 0.89 0.89-ORG3B
(152mm between tags) white/black 0.95 0.95-WBLK3B
white/white 1.02 1.02-WHT3B
Tag Colours ID (mm) P/N white/red 1.09 1.09-WR3B
red/red 1.14 1.14-RED3B
orange/black 0.13 0.13-OBLK
red/grey 1.22 1.22-RGRY3B
orange/red 0.19 0.19-OR
grey/grey 1.30 1.30-GRY3B
orange/blue 0.25 0.25-OB
yellow/yellow 1.42 1.42-YLW3B
orange/green 0.38 0.38-OG
yellow/blue 1.52 1.52-YB3B
green/yellow 0.44 0.44-GY
blue/blue 1.65 1.65-BLU3B
orange/yellow 0.51 0.51-OY
green/green 1.85 1.85-GRN3B
white/yellow 0.57 0.57-WY
purple/purple 2.06 2.06-PUR3B
orange/white 0.64 0.64-OW
purple/black 2.29 2.29-PBLK3B
black/black 0.76 0.76-BLK
purple/orange 2.54 2.54-PO3B
orange/orange 0.89 0.89-ORG
purple/white 2.79 2.79-PW3B
white/black 0.95 0.95-WBLK
black/white 3.17 3.17-BLKW3B
white/white 1.02 1.02-WHT
white/red 1.09 1.09-WR
red/red 1.14 1.14-RED
95 95
PVC, 3 Bridged, 95mm
red/grey 1.22 1.22-RGRY (95mm between tags)
grey/grey 1.30 1.30-GRY
yellow/yellow 1.42 1.42-YLW Tag Colours ID (mm) P/N
yellow/blue 1.52 1.52-YB
blue/blue 1.65 1.65-BLU orange/blue 0.25 0.25-OB3B-95
blue/green 1.75 1.75-BG orange/green 0.38 0.38-OG3B-95
green/green 1.85 1.85-GRN orange/yellow 0.51 0.51-OY3B-95
purple/purple 2.06 2.06-PUR orange/white 0.64 0.64-OW3B-95
purple/black 2.29 2.29-PBLK black/black 0.76 0.76-BLK3B-95
purple/orange 2.54 2.54-PO orange/orange 0.89 0.89-ORG3B-95
purple/white 2.79 2.79-PW white/white 1.02 1.02-WHT3B-95
black/white 3.17 3.17-BLKW grey/grey 1.30 1.30-GRY3B-95
yellow/blue 1.52 1.52-YB3B-95
green/green 1.85 1.85-GRN3B-95
purple/white 2.79 2.79-PW3B-95
62
Solva Peristaltic Pump Tubing Solva, 3 Bridged, 95mm

95 95
All tubes made from Tygon 4040 or equivalent. Supplied in packs of 12 tubes. (95mm between tags)
Special Properties:
• Special tubing for hydrocarbons, petroleum products and distillates. Tag Colours ID (mm) P/N
Advantages:
orange/green 0.38 0.38-OG3B-95-SF
• Specially formulated to transport hydrocarbons, petroleum products and
distillates. orange/yellow 0.51 0.51-OY3B-95-SF
• Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants black/black 0.76 0.76-BLK3B-95-SF
based on glycols. orange/orange 0.89 0.89-ORG3B-95-SF
• Low gas permeability. white/white 1.02 1.02-WHT3B-95-SF
Limitations: yellow/blue 1.52 1.52-YB3B-95-SF
• Not recommended for strong acids and alkalies, foodstuffs, beverages
and medicines.
• Potential leaching of plasticizers. Viton® Peristaltic Pump Tubing
All tubes made from Fluran HC F-5500-A or equivalent.
Special Properties:
140
Solva, 2 Bridged, 140mm • Special tubing for concentrated acids and corrosive solvents.
(140mm between tags)
Advantages:
• High chemical resistance.
Tag Colours ID (mm) P/N • Low gas permeability.
orange/blue 0.25 0.25-OB-SF • Wide temperature range.
orange/green 0.38 0.38-OG-SF Limitations:
orange/yellow 0.51 0.51-OY-SF • Limited service life.
orange/white 0.64 0.64-OW-SF
black/black 0.76 0.76-BLK-SF
127
Viton®, 2 Bridged, 127mm
orange/orange 0.89 0.89-ORG-SF (127mm between tags)
white/white 1.02 1.02-WHT-SF
red/red 1.14 1.14-RED-SF
Tag Colours ID (mm) P/N
grey/grey 1.30 1.30-GRY-SF
yellow/yellow 1.42 1.42-YLW-SF orange/yellow 0.51 VS0.51-OY
yellow/blue 1.52 1.52-YB-SF orange/white 0.64 VS0.64-OW
blue/blue 1.65 1.65-BLU-SF black/black 0.76 VS0. 76-BLK
green/green 1.85 1.85-GRN-SF orange/orange 0.89 VS0.89-ORG
purple/purple 2.06 2.06-PUR-SF white/white 1.02 VS1.02-WHT
purple/black 2.29 2.29-PBLK-SF red/red 1.14 VS1.14-RED
purple/orange 2.54 2.54-PO-SF grey/grey 1.30 VS1.30-GRY
yellow/yellow 1.42 VS1.42-YLW
yellow/blue 1.52 VS1.52-YB
blue/blue 1.65 VS1.65-BLU
82 82
Solva, 3 Bridged, 82mm green/green 1.85 VS1.85-GRN
(82mm between tags) purple/purple 2.06 VS2.06-PUR
purple/black 2.29 VS2.29-PBLK
Tag Colours ID (mm) P/N purple/orange 2.54 VS2.54-PO
purple/white 2.79 VS2.79-PW
orange/green 0.38 0.38-OG3B-SF
black/black 0.76 0.76-BLK3B-SF Supplied in packs of 12 tubes
orange/orange 0.89 0.89-ORG3B-SF
red/red 1.14 1.14-RED3B-SF
grey/grey 1.30 1.30-GRY3B-SF
63
Tygon® MH Peristaltic Pump Tubing

All tubes made from Tygon MHSL 2001.
Special Properties:
• Environmental-friendly tubing especially designed for solvents.
• Suitable for MIBK.
Advantages:
• High chemical resistance.
• Low gas permeability.
• Wide temperature range.
Limitations:
• Limited service life.
152
Tygon® MH , 2 Bridged, 152mm

orange/green 0.38 0.38-ORG-MH
orange/white 0.64 0.64-OW-MH
white/white 1.02 1.02-WHT-MH
yellow/blue 1.52 1.52-YB-MH
purple/purple 2.06 2.06-PUR-MH
purple/white 2.79 2.79-PW-MH
Supplied in packs of 6 tubes
72
Tygon® MH , 2 Bridged, 72mm
(72mm between tags)

orange/green 0.38 0.38-ORG-MH3
orange/white 0.64 0.64-OW-MH3
white/white 1.02 1.02-WHT-MH3
yellow/blue 1.52 1.52-YB-MH3
purple/purple 2.06 2.06-PUR-MH3
purple/white 2.79 2.79-PW-MH3
64
Contour Flared-end Peristaltic Pump Tubing
It can be quite difficult to insert the sample tubing into the peristaltic pump
tubes. This is particularly so for pump tubing with a small ID. To facilitate this 72
connection, Glass Expansion supplies Contour flared-end pump tubing. The (72mm between tags)
flared end of this pump tubing allows the larger capillary tubing to be inserted
into the smaller pump tubing.
Any of the pump tubing that we normally supply can be supplied with flared
end. Simply add “-F” to the end of the part number (eg. 0.38-OG-F). The orange/red 0.19 0.19-OR-F-S
flared-end tubing is supplied in packs of 6. orange/blue 0.25 0.25-OB-F-S
black/black 0.76 0.76-BLK-F-S
Contour Flared-end PVC orange/orange 0.89 0.89-ORG-F-S
Peristaltic Pump Tubing

All tubes made from Tygon R3603/R3607 or equivalent. Supplied in packs of PVC, 2 Bridged, 95mm
6 tubes.
(95mm between tags)
Special Properties:
• Inexpensive all-round tubing for general laboratory applications.
Advantages:
• Transparent. orange/red 0.19 0.19-OR-F-S
• Resistant to almost all inorganic materials. orange/blue 0.25 0.25-OB-F-S
• Does not age. orange/green 0.38 0.38-OG-95-F-S
• Low gas permeability. green/yellow 0.44 0.44-GY-95-F-S
• Smooth inner surface.
orange/yellow 0.51 0.51-OY-95-F-S
Limitations: orange/white 0.64 0.64-OW-95-F-S
• Potential leaching of plasticizers.
black/black 0.76 0.76-BLK-95-F-S
grey/grey 1.30 1.30-GRY-95-F-S
152
72 72
Tag Colours ID (mm) P/N (72mm between tags)
orange/black 0.13 0.13-OBLK-F
orange/red 0.19 0.19-OR-F Tag Colours ID (mm) P/N
orange/blue 0.25 0.25-OB-F orange/black 0.13 0.13-OBLK3B-F
orange/green 0.38 0.38-OG-F orange/red 0.19 0.19-OR3B-F
green/yellow 0.44 0.44-GY-F orange/blue 0.25 0.25-OB3B-F
orange/yellow 0.51 0.51-OY-F orange/green 0.38 0.38-OG3B-F
white/yellow 0.57 0.57-WY-F green/yellow 0.44 0.44-GY3B-F
orange/white 0.64 0.64-OW-F orange/yellow 0.51 0.51-OY3B-F
black/black 0.76 0.76-BLK-F white/yellow 0.57 0.57-WY3B-F
orange/orange 0.89 0.89-ORG-F orange/white 0.64 0.64-OW3B-F
white/black 0.95 0.95-WBLK-F black/black 0.76 0.76-BLK3B-F
white/white 1.02 1.02-WHT-F orange/orange 0.89 0.89-ORG3B-F
white/red 1.09 1.09-WR-F white/black 0.95 0.95-WBLK3B-F
red/red 1.14 1.14-RED-F white/white 1.02 1.02-WHT3B-F
red/grey 1.22 1.22-RGRY-F white/red 1.09 1.09-WR3B-F
grey/grey 1.30 1.30-GRY-F red/red 1.14 1.14-RED3B-F
yellow/yellow 1.42 1.42-YLW-F red/grey 1.22 1.22-RGRY3B-F
yellow/blue 1.52 1.52-YB-F grey/grey 1.30 1.30-GRY3B-F
blue/blue 1.65 1.65-BLU-F yellow/yellow 1.42 1.42-YLW3B-F
blue/green 1.75 1.75-BG-F yellow/blue 1.52 1.52-YB3B-F
green/green 1.85 1.85-GRN-F blue/blue 1.65 1.65-BLU3B-F
purple/purple 2.06 2.06-PUR-F green/green 1.85 1.85-GRN3B-F
purple/black 2.29 2.29-PBLK-F purple/purple 2.06 2.06-PUR3B-F
purple/orange 2.54 2.54-PO-F purple/black 2.29 2.29-PBLK3B-F
purple/white 2.79 2.79-PW-F purple/orange 2.54 2.54-PO3B-F
black/white 3.17 3.17-BLKW-F purple/white 2.79 2.79-PW3B-F
black/white 3.17 3.17-BLKW3B-F
65
95 95
PVC, 3 Bridged, 95mm 82 82
Solva, 3 Bridged, 82mm
(95mm between tags) (82mm between tags)
Tag Colours ID (mm) P/N Tag Colours ID (mm) P/N

orange/blue 0.25 0.25-OB3B-95-F orange/green 0.38 0.38-OG3B-SF-F
orange/green 0.38 0.38-OG3B-95-F black/black 0.76 0.76-BLK3B-SF-F
orange/yellow 0.51 0.51-OY3B-95-F orange/orange 0.89 0.89-ORG3B-SF-F
black/black 0.76 0.76-BLK3B-95-F red/red 1.14 1.14-RED3B-SF-F
orange/orange 0.89 0.89-ORG3B-95-F grey/grey 1.30 1.30-GRY3B-SF-F
white/white 1.02 1.02-WHT3B-95-F
grey/grey 1.30 1.30-GRY3B-95-F
yellow/blue 1.52 1.52-YB3B-95-F 95 95
green/green 1.85 1.85-GRN3B-95-F (95mm between tags)
purple/white 2.79 2.79-PW3B-95-F
orange/green 0.38 0.38-OG3B-95-SF-F
Contour Flared-end Solva orange/yellow 0.51 0.51-OY3B-95-SF-F
Peristaltic Pump Tubing black/black 0.76 0.76-BLK3B-95-SF-F
All tubes made from Tygon 4040 or equivalent. Supplied in packs of 6 tubes. orange/orange 0.89 0.89-ORG3B-95-SF-F
white/white 1.02 1.02-WHT3B-95-SF-F
Special Properties:
yellow/blue 1.52 1.52-YB3B-95-SF-F
• Special tubing for hydrocarbons, petroleum products and distillates.
Advantages:
• Specially formulated to transport hydrocarbons, petroleum products and
distillates.
• Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants
based on glycols.
• Low gas permeability.
Limitations:
• Not recommended for strong acids and alkalies, foodstuffs, beverages
and medicines.
• Potential leaching of plasticizers.
140

orange/blue 0.25 0.25-OB-SF-F
orange/green 0.38 0.38-OG-SF-F
orange/yellow 0.51 0.51-OY-SF-F
orange/white 0.64 0.64-OW-SF-F
black/black 0.76 0.76-BLK-SF-F
orange/orange 0.89 0.89-ORG-SF-F
white/white 1.02 1.02-WHT-SF-F
red/red 1.14 1.14-RED-SF-F
grey/grey 1.30 1.30-GRY-SF-F
yellow/yellow 1.42 1.42-YLW-SF-F
yellow/blue 1.52 1.52-YB-SF-F
blue/blue 1.65 1.65-BLU-SF-F
green/green 1.85 1.85-GRN-SF-F
purple/purple 2.06 2.06-PUR-SF-F
purple/black 2.29 2.29-PBLK-SF-F
purple/orange 2.54 2.54-PO-SF-F
purple/white 2.79 2.79-PW-SF-F
66
Contour Flared-end Viton® Contour Flared-end Tygon® MH

Peristaltic Pump Tubing Peristaltic Pump Tubing
All tubes made from Fluran HC F-5500-A or equivalent. All tubes made from Tygon MHSL 2001.
Special Properties: Special Properties
• Special tubing for concentrated acids and corrosive solvents. • Environmental-friendly tubing especially designed for solvents.
• Suitable for MIBK.
Advantages:
• High chemical resistance. Advantages:
• Low gas permeability. • High chemical resistance.
• Wide temperature range. • Low gas permeability.
• Wide temperature range.
Limitations:
• Limited service life. Limitations:
• Limited service life.
Viton , 2 Bridged, 127mm

®
127
(127mm between tags) 152
Tygon® MH, 2 Bridged, 152mm
orange/yellow 0.51 VS0.51-OY-F
orange/green 0.38 0.38-ORG-MH-F
orange/white 0.64 VS0.64-OW-F
orange/white 0.64 0.64-OW-MH-F
black/black 0.76 VS0.76-BLK-F
white/white 1.02 1.02-WHT-MH-F
orange/orange 0.89 VS0.89-ORG-F
yellow/blue 1.52 1.52-YB-MH-F
white/white 1.02 VS1.02-WHT-F
purple/purple 2.06 2.06-PUR-MH-F
red/red 1.14 VS1.14-RED-F
purple/white 2.79 2.79-PW-MH-F
grey/grey 1.30 VS1.30-GRY-F
yellow/yellow 1.42 VS1.42-YLW-F Supplied in packs of 6 tubes
yellow/blue 1.52 VS1.52-YB-F
blue/blue 1.65 VS1.65-BLU-F
Tygon® MH, 2 Bridged, 72mm
green/green 1.85 VS1.85-GRN-F 72
(72mm between tags)
purple/purple 2.06 VS2.06-PUR-F
purple/black 2.29 VS2.29-PBLK-F
purple/orange 2.54 VS2.54-PO-F
purple/white 2.79 VS2.79-PW-F orange/green 0.38 0.38-ORG-MH3-F
Supplied in packs of 6 tubes orange/white 0.64 0.64-OW-MH3-F
white/white 1.02 1.02-WHT-MH3-F
yellow/blue 1.52 1.52-YB-MH3-F
purple/purple 2.06 2.06-PUR-MH3-F
purple/white 2.79 2.79-PW-MH3-F
67
Notes
68
International Europe
6 Central Boulevard Friedenbachstrasse 9
Port Melbourne 35781 Weilburg
Vic 3207, Australia Germany
Telephone: +61 3 9320 1111 Telephone: +49 6471 3778517
Facsimile: +61 3 9320 1112 Email: [email protected]
Email: [email protected]
Americas
31 Jonathan Bourne Drive, Unit 7
Pocasset, MA 02559, USA
Toll Free Phone: 800 208 0097
Telephone: 508 563 1800
Facsimile: 508 563 1802
Email: [email protected]
April 2022

GE Catalogue

Uploaded by

Copyright:

Available Formats

GE Catalogue

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GE Catalogue

Uploaded by

Copyright:

Available Formats

ICP-OES/ICP-MS

Supplies & Accessories

HydraMist Simultaneous Cold Vapor/Pneumatic Nebulization Spray Spectro™

Torches..................................................................................................8 Thermo Fisher®

PRO Duo...................................... ICP-OES................................................52

Accessories PRO Radial.................................. ICP-OES................................................54

IsoMist XR Programmable Temperature Spray Chambers.........................10 6000/7000 Duo............................. ICP-OES................................................56

Guardian In-Line Sample Filter...................................................................11 6000/7000 Radial......................... ICP-OES................................................58

Guardian In-Line Non-Return Gas Filter.....................................................11

Single-Cell Sample Introduction System for ICP-MS..................................13 Pump Tubing

5000 Series SVDV/VDV/RV......... ICP-OES................................................28

Introduction to Glass Expansion Nebulizers

SeaSpray 20 75 No High Good Glass

OpalMist 15 75* Yes High Excellent PFA

DuraMist 30 75* Yes High Good PEEK

VeeSpray 30 300 Yes Moderate Good Ceramic

* Varies with nebulizer uptake

Glass Expansion Nebulizer Part Numbers Explained

ZZ Nebulizer model type:

A#-yy-ZZnnn nnn Aspirated uptake at nominal argon flow, in mL/min eg:

Learn About Glass Expansion Nebulizers

Agilent® Vista/700-ES, 4100/4200 70-803-0969

Agilent® 7700/7800/7900/8800/8900 70-803-1105

Agilent 5000 ICP-OES Series

Analytik Jena ICP-MS®

Analytik Jena® ICP-OES 70-803-1105

Horiba® Jobin Yvon (All models) 70-803-1105

Leeman (All Models) 70-803-0969

PerkinElmer® Elan/NexION 300/350 70-803-1049

• Instrument-specific Direct Connect flexible argon line. Shimadzu (All models)

U-Series Quartz Concentric Nebulizers

Nebulizer Selection Guide

MicroMist High TDS? >5%

Particulates? >75µm Particulates? >75µm

VeeSpray Requirement? Slurry Requirement?

Best Performance High TDS Best Performance Routine Operation

SeaSpray DuraMist SeaSpray Conikal

Aqueous Solutions without HF for ICP-MS

MicroMist High TDS? >5%

Particulates? >75µm Particulates? >75µm

VeeSpray SeaSpray Slurry Requirement?

Best Performance Low-Level Boron Highest Purity

SeaSpray Quartz SeaSpray OpalMist

Nebulizer Selection Guide

OpalMist High TDS >5%?

Particulates? >75µm Particulates? >75µm

VeeSpray DuraMist VeeSpray Requirement?

Highest Purity Best Performance

MicroMist Particulates? >75µm

Introduction to Glass Expansion Spray Chambers

Spray Chamber Types

Twister Internal Volume, mL: 50

Internal Volume, mL: 20 • Bonding to the nebulizer can result in breakage

Tracey PFA44 Internal Volume, mL: 44

HydraMist Simultaneous Cold Vapor/

Agilent® 5000 ICP-OES Series KT-1157

Analytik Jena® PQ 9000 KT-1157

PerkinElmer Avio 200/500

PerkinElmer Optima 8000/8300 DV