Scribd Logo
Upload

Welcome to Scribd!

  • 37 views

    MDC-TSD-ATMS-T2-RFA-PL-033 - MCI - Approval of 20mm Outside Diameter CWL Which Was Originally 20mm Inside Diameter As Per IFC

    Uploaded by

    reuben tanglao
    1) A submittal is requesting approval for a 20mm outside diameter cold water line (CWL) which was originally specified as 20mm inside diameter per initial facility configuration (IFC) plans. 2) The NBFCI reviewer notes that the CWL should be 20mm inside diameter (nominal) as per their plans. 3) The submittal is returned with a note to revise and resubmit the CWL to match the 20mm inside diameter specification in the plans.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MDC-TSD-ATMS-T2-RFA-PL-033 - MCI - Approval of 20mm Outside Diameter CWL Which Was Originally 20mm Inside Diameter As Per IFC

    Uploaded by

    reuben tanglao
    37 views3 pages
    1) A submittal is requesting approval for a 20mm outside diameter cold water line (CWL) which was originally specified as 20mm inside diameter per initial facility configuration (IFC) plans. 2) The NBFCI reviewer notes that the CWL should be 20mm inside diameter (nominal) as per their plans. 3) The submittal is returned with a note to revise and resubmit the CWL to match the 20mm inside diameter specification in the plans.

    Original Title

    MDC-TSD-ATMS-T2-RFA-PL-033 - MCI - Approval of 20mm Outside Diameter CWL Which Was Originally 20mm Inside Diameter as Per IFC (1) (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) A submittal is requesting approval for a 20mm outside diameter cold water line (CWL) which was originally specified as 20mm inside diameter per initial facility configuration (IFC) plans. 2) The NBFCI reviewer notes that the CWL should be 20mm inside diameter (nominal) as per their plans. 3) The submittal is returned with a note to revise and resubmit the CWL to match the 20mm inside diameter specification in the plans.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    37 views3 pages

    MDC-TSD-ATMS-T2-RFA-PL-033 - MCI - Approval of 20mm Outside Diameter CWL Which Was Originally 20mm Inside Diameter As Per IFC

    Uploaded by

    reuben tanglao
    1) A submittal is requesting approval for a 20mm outside diameter cold water line (CWL) which was originally specified as 20mm inside diameter per initial facility configuration (IFC) plans. 2) The NBFCI reviewer notes that the CWL should be 20mm inside diameter (nominal) as per their plans. 3) The submittal is returned with a note to revise and resubmit the CWL to match the 20mm inside diameter specification in the plans.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    FR-04-BIMD-002-rev.

    0
    Project:
    AVIDA TOWERS MAKATI SOUTH POINT
    REQUEST FOR APPROVAL Location:
    Brgy. Bangkal Chino Roces Ave. Makati City

    To: Date:
    NBF 6/9/2022
    Attention: Date Required:
    ALDRIEN DULAY/MARK FLORA/WILBERT VALDEZ 6/21/2022
    Copy To:
    Ritz Bernal (ADD) Philip Gregor Ramos (CMG) Reynard Maranan (CMG)

    Submittal No: MDC-TSD-ATMS-T2-RFA-PL-033 Previous Submittal No:


    submittal project trade type division no continuous count rev submittal project trade type csi continuous count rev

    New Submittal Resubmittal 1 2 3 Date:


    Submittal Type: SD SHOPDRAWING/DRAWING MAT SAMPLE MATERIAL DOCS PRODUCT DATA/SPECS/METHODS/TEST RESULTS/CERTIFICATIONS/ETC

    Title/Description/Manufacturer/Location of Application Specification, Section, Title and Paragraph/Drawing Detail Reference


    Quantity

    Approval of 20mm outside diameter CWL which was originally


    MCI
    20mm inside diameter as per IFC

    Other Remarks on Submittal:

    For MDC Contract Scope & Site Condition:


    Reviewed & Checked By: as per contract scope Reviewed & Checked By: site is ready

    ARMY GUIRIBA/ VINCENT GARCIA NOT as per contract scope GARETH GALANG site is NOT ready
    MEPFS ENGINEER PROJECT MANAGER
    Remarks: Remarks:

    For Design/Drawings/Specifications:
    Reviewed & Checked By: Date Received Date Returned Date required "+/- (Days)"
    by Consultant by Consultant by MDC
    RECIL FAYE ORIBELLO
    BIMD SUPERVISOR BIMD OFFICER BIMD MANAGER
    Remarks:

    Approver's Response:

    A Approved B Approved as Commented C Revise and Resubmit D Disapproved


    ALDRIEN DULAY/MARK FLORA/WILBERT VALDEZ
    NBF Signature Over Printed Name and Date

    Other Remarks on Response:


    SEE REMARKS! 15/06/2022

    FOR MDC USE ONLY - INSTRUCTION AS PER APPROVER'S RESPONSE.

    GARETH GALANG PHILIP GREGOR RAMOS/REYNARD MARANAN


    PM/PIC/QS CMG PD/CMG Officer
    Signature Over Printed Name and Date Signature Over Printed Name and Date
    Remarks & Instruction: Remarks & Instruction:

    Copy Distribution To:


    BIMD QS PROCUREMENT QA FE/FA SUBCONTRACTOR Others: ____________________________
    MEPFS EXTERIOR UTILITIES

    NBFCI NOTE:
    -20mm SHOULD BE INSIDE DIAMETER (NOMINAL) AS PER OUR PLANS.

    15/06/2022

    ➢ CWL stub-out should be 20mm inside diameter. Actual onsite is 20mm outside diameter
    ➢ WC stub-out conflict with pipe chase enclosure, should be 170mm from wall as per plan. Actual site is 130mm
    For approval of 20mm outside diameter CWL which was originally 20mm inside diameter as per IFC

    NBFCI NOTE:
    -20mm SHOULD BE INSIDE DIAMETER (NOMINAL) AS PER OUR PLANS.

    15/06/2022

    You might also like