Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Admbs 1

    Uploaded by

    Swapnil K
    This document is a past exam paper for a course on analysis and design of multi-story buildings. It contains 6 questions testing various concepts. Question 1 has parts asking about the effect of high temperatures on structural members, response spectrum method, and protection against concrete spalling. Questions 2 through 5 require calculations and design of structural elements like columns, beams, shear walls for buildings of varying heights and plans under given loading and seismic conditions. Question 6 asks to explain the diagonal strut method for analysis of infilled frames and failure mechanisms of infilled frames.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Admbs 1

    Uploaded by

    Swapnil K
    11 views1 page
    This document is a past exam paper for a course on analysis and design of multi-story buildings. It contains 6 questions testing various concepts. Question 1 has parts asking about the effect of high temperatures on structural members, response spectrum method, and protection against concrete spalling. Questions 2 through 5 require calculations and design of structural elements like columns, beams, shear walls for buildings of varying heights and plans under given loading and seismic conditions. Question 6 asks to explain the diagonal strut method for analysis of infilled frames and failure mechanisms of infilled frames.

    Original Description:

    pfa

    Original Title

    ADMBS 1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a past exam paper for a course on analysis and design of multi-story buildings. It contains 6 questions testing various concepts. Question 1 has parts asking about the effect of high temperatures on structural members, response spectrum method, and protection against concrete spalling. Questions 2 through 5 require calculations and design of structural elements like columns, beams, shear walls for buildings of varying heights and plans under given loading and seismic conditions. Question 6 asks to explain the diagonal strut method for analysis of infilled frames and failure mechanisms of infilled frames.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views1 page

    Admbs 1

    Uploaded by

    Swapnil K
    This document is a past exam paper for a course on analysis and design of multi-story buildings. It contains 6 questions testing various concepts. Question 1 has parts asking about the effect of high temperatures on structural members, response spectrum method, and protection against concrete spalling. Questions 2 through 5 require calculations and design of structural elements like columns, beams, shear walls for buildings of varying heights and plans under given loading and seismic conditions. Question 6 asks to explain the diagonal strut method for analysis of infilled frames and failure mechanisms of infilled frames.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    DJect Code: 59027 / Propram Elective - IlAnalysis and Design of Multi-storcy Buildings

    ME Civil Sem I
    Marks: 80
    Time: 3Hours

    N.B:
    1. Question No. I iscompulsory the remaining questions.
    2. Attempt any Threc questions from
    data if required.
    3. Assume any suitableindicate full marks.
    4. Figurcs to the right is permitted
    5. Uscof relcvant IS code 5
    structural members.
    of high temperature
    on different type of 5
    effect
    Q1. a) What are the
    response spectrum mcthod
    b) Explain the of concrete with high
    temperature
    protection against spalling 5
    c) What are the
    storey drift and soft storey.
    d) Explain the term 400mm subjected to the
    20

    for a column of size 400 mm x based against


    Q.2 Design the reinforcement has an unsupported length 4 m and is
    the column
    following forces. directions, use M25 and Fe 415 Seismic load
    side sway in both Dead load
    Live Load
    400 300
    Axial Load (kN) 600 60
    40
    Moment kN-m 50
    20
    20 m x 20m height
    Grid size 5 m x 5 m and plan dimension medium stiff and it
    Q.3 RCCbuilding have in each storey height 3 m. type of soil is
    having frame the intensity
    of building 12 m
    design building with ordinary moment resistinglocated at Mumbai.
    isproposed to building is
    and imposed 3 kN/m .use M25 and
    of dead load 5 kN/mseismic load and the structure static analysis.
    Determine the design
    Fe 415 20
    grid size 4 m x 4m.
    dimension 16 m x 16 m and
    Aseven storey
    building has a plan Cross-section of beam is 300
    Q.4 having size 400 mm x 400mm (25nos) acting on floor is 4
    The column
    height between floor is 3.2 m. dead load hard and
    mm x 600 mm The 2kN/m2 on all floor Soil below the foundation is different
    KN/m and live load shears at
    Mumbai, Determine seismic forces and
    building is located in
    Fe 415
    floor levels. .use M25 and
    x 5m 20
    x 30m and grid size 5 m
    twelve storey building has a plan dimension 30 mprovided in each direction resist
    Q.5 A shear wall are to be
    height of each storey 3 m. Twoon each shear wall is 7000kN. Maximum shear force
    load
    the seismic forces. axial 40000kN -m. length of
    maximum bending moment at base forces .use M25 and
    at base 1500kN and shear wall to resist seismic
    m. Design the ductile
    shear wall10
    Fe 415 10
    of in filled frame
    diagonal strut method for analysis
    Q.6 a) Explain equivalent without opening
    1, Infilled wall
    2. Infilled wall with opening 10
    mechanism of Infilled Frame
    b) Explain with sketches failure

    34092
    Page 1 of 1

    8831FIA97C62DFO3C31 AF8DE14A7A1IF2

    You might also like