Scribd
Upload
169 views12 pages

FTTH TP-Link Setup Guide 2

This document provides a guide for setting up a TP-Link wireless router for a fiber internet connection. It includes steps to unpack the router components, connect cables from the ONT to the router, access the router's wireless network, log into the router administration page to configure the WiFi network name and password, select the connection type, enter the internet username and password, and enable remote access to the router for technical support. The setup process concludes with checking that the router has an internet connection indicated by a green light.

Uploaded by

fraser.byron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
169 views12 pages

FTTH TP-Link Setup Guide 2

This document provides a guide for setting up a TP-Link wireless router for a fiber internet connection. It includes steps to unpack the router components, connect cables from the ONT to the router, access the router's wireless network, log into the router administration page to configure the WiFi network name and password, select the connection type, enter the internet username and password, and enable remote access to the router for technical support. The setup process concludes with checking that the router has an internet connection indicated by a green light.

Uploaded by

fraser.byron
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

FTTH TP-Link Setup Guide

V 2.2

1
TP-Link Setup Guide

Take router out of box and make sure the


follow items are inside: TP-link N300
1. WIRUlink wireless router (TP-Link TP-link Acher C5
WR850N
N300 or TP-link Archer C5)
2. 9v Power Supply
3. Ethernet Network Cable

2
TP-Link Setup Guide

Step 2 – Plug in all the Cables

2.1. Plug in Network cable from port 1 on


ONT or CPE to the blue port on the
TP-link router.

2.2 Power on TP-link router and follow


the following step to setup your router.

3
TP-Link Setup Guide

STEP 3 - Router Setup

3.1 Connect to the routers WiFi


The SSID and Wireless Password/Pin
can be found on the underside of the
router

3.2 Open Web browser on your phone or


computer.

3.3 Go to http://tplinkwifi.net or
192.168.0.1

4
TP-Link Setup Guide

3.4 Please set a new password for your


router. Please remember this password to
gain access to your router.

3.5 Click on “Let’s Get Started”

5
TP-Link Setup Guide

3.6 Quick Setup will open

3.7 Connection type selection

Aerial Fibre (PPPoE)


Vumatel & Evotel

Trenched Fibre (Dynamic IP)


Vumatel

3.8 Click “Next”

6
TP-Link Setup Guide

3.9 Internet Setup

Aerial Clients
Vumatel & Evotel
(Please enter the username & password)
(Click “Next”)

Trenched Clients
Vumatel
(Click “Next”)

7
TP-Link Setup Guide

3.10 Wireless Settings

Here we can change the routers


SSID or Name as well as the
Password.

3.11 Click “Next”

8
TP-Link Setup Guide

3.12 Summary

Here you will see that setup we are


Going to save to the router
Please take note of SSID & Password

3.13 Click “Save”

The router will save and reboot it self


If you have made changes to WiFi
SSID and password you will have to
reconnect to the WiFi.

9
TP-Link Setup Guide

3.14 After the setup is completed the


earth ball logo on router will change to
green to indicate that there is a internet
connection.

If you require any assists please feel


free to contact our helpdesk on

Tel: 010 595 0000


Email: [email protected]

10
TP-Link Setup Guide

For WIRUlink to be able to offer great


support remotely (check router settings,
configure phones, setup port forwarding)
is is very important to ALWAYS do the
following:

1. Log into router via Browser

2. In the left menu, click “Security” >


“Remote Management”

3. Web Management Port: 8291


Remote Management IP Address:
154.66.152.92

4. Click on “Save”

11
TP-Link Setup Guide

Notice:
1. A hard reset will restore your device to factory default settings. You should reconfigure the device from scratch or you can
load the configuration file you have backed up before the reset.
2. For these models, we could see WPS/RESET button on the rear panel/the Front Panel. To use WPS function, please
push the button for less than 5 seconds, and then the WPS LED will flash; to reset the router, please push the button for at
least 10 seconds.

12

You might also like