International Student Workshop

on Materials Science and Engineering 2021

(ISWMSE 2021)

Kyushu Institute of
Technology

National Taiwan University

of Science and Technology

Changwon National
University

Sepuluh Nopember
Institute of Technology

December 20-21, 2021

Virtual
Aim
We hold this joint workshop on materials science and engineering. The purpose of this
workshop is offering an opportunity of sharing scientific and technological knowledges,
education of students, and international collaboration between participating professors and
students.
Materials science and engineering has opened new scientific fields in fundamental
researches, and also has significant roles in technologies. Innovation in materials promises
to advance the science and technologies. Each university and institution is performing
active researches on materials science and engineering, and has strong research areas. Our
understanding of materials will be deepened by sharing these knowledges. This workshop
may also offer an opportunity to start a new co-research.
There are many international conferences on materials science and engineering. It may be
difficult for some students to participate in such conferences, and the workshop for educating
students are limited. In this workshop, many students present their results, and some of the
students join the workshop organization.
International collaboration of professors and international interaction between students are
required. International collaboration partners on the department level are very important for
the international activity, and the joint workshop deepens the partnership between the
departments as well as individual professors and students.
We expect active discussions and interaction between participating students and
professors. In future, we expect not only to keep this international collaboration platform but
also to expand the collaboration partner to other universities and institutions.

1
2
Professor Session

3
Professor session (20, December) Room 1
9:10-10:50 (Indonesia), 10:10-11:50 (Taiwan), 11:10-12:50 (Korea, Japan)

Chair: Jun-Seob Lee (Changwon National University), Diah Susanti (Sepuluh Nopember
Institute of Technology)

9:10-9:35 (Indonesia), 10:10-10:35 (Taiwan), 11:10-11:35 (Korea, Japan)

Sigit Tri Wicaksono (Sepuluh Nopember Institute of Technology)
“High potential of Indonesia's natural resources: From Research to Better Life and National
Competitiveness”

9:35-10:00 (Indonesia), 10:35-11:00 (Taiwan), 11:35-12:00 (Korea, Japan)

Jyh-Chien Chen (National Taiwan University of Science and Technology)
“Introduction to the Department of Materials Science and Engineering at National Taiwan
University of Science and Technology (NTUST)”

10:00-10:25 (Indonesia), 11:00-11:25 (Taiwan), 12:00-12:25 (Korea, Japan)

Youngung Jeong (Changwon National University)
“Elasto-visco-plastic self-consistent polycrystal model and its applications”

10:25-10:50 (Indonesia), 11:25-11:50 (Taiwan), 12:25-12:50 (Korea, Japan)

Manabu Ishimaru (Kyushu Institute of Technology)
“Introduction of the Department of Materials Science & Engineering, Kyushu Institute of
Technology”

4
Student Session

5
Student Session I A (20, December) Room 1
12:20-15:00 (Indonesia), 13:20-16:00 (Taiwan), 14:20-17:00 (Korea, Japan)

Chair: Hsueh-Sheng Tseng (National Taiwan University of Science and Technology), Jefri
Kurniawan (Sepuluh Nopember Institute of Technology)

Time Speaker Title

12:20-12:35 Isamu Kawano
Control of nanostructure in manganese spinel oxide
13:20-13:35 IA1 (Kyushu Institute of
14:20-14:35 Co0.6Fe0.9Mn1.5O4
Technology)
Helmi Son Haji
12:35-12:50 (National Taiwan Metallic Nanotube Arrays: Fabrication and Their
13:35-13:50 IA2 University of Surface-enhanced Raman Scattering (SERS)
14:35-14:50 Science and Application
Technology)
12:50-13:05 Ji Un Park Effect of Heat Treatment on Microstructure Evolution
13:50-14:05 IA3 (Changwon National and the Mechanical Properties of Inconel 740H
14:50-15:05 University) Superalloy
13:05-13:20 Tatsuya Myoga
Effect of hydrogen charging in fcc Fe investigated by
14:05-14:20 IA4 (Kyushu Institute of
15:05-15:20 first-principles calculation
Technology)
Iyando Aditiyawan,
Adhy prihatmiko,
Fransisca Angela A Lagrangian Finite Element Modelling by ANSYS
13:20-13:35
Margaretha Explicit Dynamic for Extreme Deformation Investigation
14:20-14:35 IA5
15:20-15:35 Rochdiyanti in Different Bullet Designs Penetrating Ballistic
(Sepuluh Nopember Gelatine
Institute of
Technology)
Coffee break : 10min
I Chen Chen
13:45-14:00 (National Taiwan
Preparation and characterization of SiO2-PMMA
14:45-15:00 IA6 University of
15:45-16:00 coating for radiative cooling applications
Science and
Technology)
14:00-14:15 Kento Higashi Effects of pulse laser frequency and oxygen annealing
15:00-15:15 IA7 (Kyushu Institute of on nanostructures of Ba2LuNbO6-doped YBa2Cu3O7-y
16:00-16:15 Technology) thin films
14:15-14:30 Sijia Liu
Microstructure Evolution of Nickel-base Superalloys
15:15-15:30 IA8 (Changwon National
16:15-16:30 upon Ultrasonic Shot Peening
University)
14:30-14:45 Yusuke Kanazawa
Structure analysis of swift heavy ion irradiated complex
15:30-15:45 IA9 (Kyushu Institute of
16:30-16:45 oxides
Technology)
Faizah Ali, Jauhar
14:45-15:00 Azhar, Sugiarto A Lead-free Cu-Sn Metal Matrix Composite-Based
15:45-16:00 IA10 (Sepuluh Nopember Bullet Fabrication for Anti-Ricochet Ammunition
16:45-17:00 Institute of Potentials
Technology)

6
Student Session I B (20, December) Room 2
12:20-15:00 (Indonesia), 13:20-16:00 (Taiwan), 14:20-17:00 (Korea, Japan)

Chair: Kosei Kubo (Kyushu Institute of Technology), Ahmad Ramadhan (Sepuluh Nopember
Institute of Technology)

Time Speaker Title

12:20-12:35 Syuga Shigetou
Fabrication and Thermoelectric Property of Nb doped
13:20-13:35 IB1 (Kyushu Institute of
14:20-14:35 SrTiO3 film
Technology)
12:35-12:50 Yejin Lee
Passive Behavior of Inconel 718 Alloy in an Acidic
13:35-13:50 IB2 (Changwon National
14:35-14:50 Solution
University)
12:50-13:05 Kenji Shimizu
Current transfer analysis of solder-joined REBCO wire
13:50-14:05 IB3 (Kyushu Institute of
14:50-15:05 by multi-point I-V characteristics
Technology)
Hsueh-Sheng Tseng
13:05-13:20 (National Taiwan
Studies of self-healing and stretchable conductive
14:05-14:20 IB4 University of
15:05-15:20 polymer films on organic electrochemical transistors
Science and
Technology)
Ahmad Fahmi
13:20-13:35 Prakoso
Research Progress on Energy conversion technology:
14:20-14:35 IB5 (Sepuluh Nopember
15:20-15:35 PEMFC & DCFC
Institute of
Technology)
Coffee break : 10min
Tien-Shin Chen
13:45-14:00 (National Taiwan
Trimetallic Thin Film prepared by RF sputter for Overall
14:45-15:00 IB6 University of
15:45-16:00 Water Splitting in Alkaline Solution
Science and
Technology)
14:00-14:15 Mitsuki Mizuno
Critical current characteristics of Ca-doped
15:00-15:15 IB7 (Kyushu Institute of
16:00-16:15 GdBa2Cu3O7-x superconducting thin films
Technology)
14:15-14:30 Junhyeong Lee
Effect of Carbon Content on the Passivation Behavior
15:15-15:30 IB8 (Changwon National
16:15-16:30 of High Chrome Cast Iron
University)
Dao Lam Gia Hao
14:30-14:45 (National Taiwan Improved Stability of Flexible Hybrid Photodetectors
15:30-15:45 IB9 University of Based On Mixed Organic-Inorganic Perovskite/
16:30-16:45 Science and Cellulose Nanocrystals Film
Technology)
Sofyan Abidin
14:45-15:00 Synthesis of Copper Indium Sulfide Quantum
(Sepuluh Nopember
15:45-16:00 IB10 Dots/Titanium Dioxide using The Wet Chemical
16:45-17:00 Institute of
Method as An Antimicrobial Material
Technology)

7
Student Session II A (21, December) Room 1
9:00-11:00 (Indonesia), 10:00-12:00 (Taiwan), 11:00-13:00 (Korea, Japan)

Chair: Chih-Hao Chiang (National Taiwan University of Science and Technology),

Junhyeong Lee (Changwon National University)

Time Speaker Title

9:00-9:15 Koki Ohba

Effect of (001) Fiber Texture in Iron Powder on
10:00-10:15 IIA1 (Kyushu Institute of
11:00-11:15 Magnetic Properties of Soft Magnetic Composite.
Technology)
Yi Ju Hsieh
9:15-9:30 (National Taiwan
Synthesis and characterization of Zn2SiO4 powder
10:15-10:30 IIA2 University of
11:15-11:30 using spray drying
Science and
Technology)
Jeffry Kurniawan
9:30-9:45 Preparation of Superparamagnetic Nanoparticles
(Sepuluh Nopember
10:30-10:45 IIA3 Oxide Fe3O4 from Iron Sand for Water Treatment
11:30-11:45 Institute of
Application
Technology)
9:45-10:00 Koki Nakano Synthesis and Photoluminescence Properties of
10:45-11:00 IIA4 (Kyushu Institute of Eu(III)-containing Silica Nanoparticles via
11:45-12:00 Technology) Mechanochemical Solid-state Reaction.
Coffee break : 10min
Andre Tjahjono
10:15-10:30 (National Taiwan
Rapid thermal annealing for improving GaSe-Ni device
11:15-11:30 IIA5 University of
12:15-12:30 performance based on photodetector application
Science and
Technology)
10:30-10:45 Seonghyo Ham
Solidification microstructure evolution with directional
11:30-11:45 IIA6 (Changwon National
12:30-12:45 solidification and AM in IN625 alloy
University)
Cheng-You Tsai
10:45-11:00 (National Taiwan Interfacial engineering for triboelectric nanogenerators
11:45-12:00 IIA7 University of and their application in self-powered formaldehyde
12:45-13:00 Science and sensors
Technology)

8
Student Session II B (21, December) Room 2
9:00-11:00 (Indonesia), 10:00-12:00 (Taiwan), 11:00-13:00 (Korea, Japan)

Chair: Yusuke Kanazawa (Kyushu Institute of Technology), Yejin Lee (Changwon National
University)

Time Speaker Title

9:00-9:15 Yui Ogasawara Effect of test temperature on interactions between

10:00-10:15 IIB1 (Kyushu Institute of plastic deformation and hydrogen for SUS310S
11:00-11:15 Technology) stainless steel
Ting Wei Wu
9:15-9:30 (National Taiwan Preparation of novel freeze dried collagen, barium
10:15-10:30 IIB2 University of titanate and β-tricalcium phosphate for dental filler
11:15-11:30 Science and composites
Technology)
9:30-9:45 Ryosuke Hayashi
Changes in hydrogen embrittlement behavior for Ni-Ti
10:30-10:45 IIB3 (Kyushu Institute of
11:30-11:45 superelastic alloy by different charging solutions
Technology)
Denny Hartanto
9:45-10:00
(Sepuluh Nopember Shape memory polyurethane foam as candidate
10:45-11:00 IIB4
11:45-12:00 Institute of materials embolization endovascular aneurysm
Technology)
Coffee break : 10min
Sheng-Yuan Chen
10:15-10:30 (National Taiwan
Phenylboronic acid-grafted hydrogels as drug delivery
11:15-11:30 IIB5 University of
12:15-12:30 systems for dry eye treatment
Science and
Technology)
10:30-10:45 Liming Xu
Precipitation Behavior in HR3C Heat Resistant Steel
11:30-11:45 IIB6 (Changwon National
12:30-12:45 During Creep Test
University)
Ya-Hsien Wang
10:45-11:00 (National Taiwan Shear-thinning laponite/gelatin-based hydrogels as cell
11:45-12:00 IIB7 University of carriers to rescue the cardiomyocytes from oxidative
12:45-13:00 Science and stress
Technology)

9
Student Session III A (21, December) Room 1
12:20-14:45 (Indonesia), 13:20-14:45 (Taiwan), 14:20-15:45 (Korea, Japan)

Chair: Yui Ogasawara (Kyushu Institute of Technology), Alvan Alfaridzi (Sepuluh Nopember
Institute of Technology)

Time Speaker Title

12:20-12:35 Hiroki Tsumura

Thermodynamic analysis of phase equilibria in the Ni-
13:20-13:35 IIIA1 (Kyushu Institute of
14:20-14:35 P binary system
Technology)
12:35-12:50 Mooyeong Joo An application of self-consistent polycrystal elasto-
13:35-13:50 IIIA2 (Changwon National plasticity finite element method in springback analysis
14:35-14:50 University) of mild steel
12:50-13:05 Naoki Matsumoto
Thermodynamic calculation of phase equilibria in the
13:50-14:05 IIIA3 (Kyushu Institute of
14:50-15:05 Al-Fe-Zn-O quaternary system
Technology)
Nicky Dwi Saputra
13:05-13:20
(Sepuluh Nopember
14:05-14:20 IIIA4 Chitosan biosorption for PGM and rare earth elements
15:05-15:20 Institute of
Technology)
Sin-Yi Chen
13:20-13:35 (National Taiwan Using Calculation Method to Predict the Formation
14:20-14:35 IIIA5 University of Zone and Mechanical Properties of the Al-Co-Fe-Ni-Ti
15:20-15:35 Science and Lightweight High Entropy Alloy
Technology)
Coffee break : 10min

13:45-14:00 Gouki Kuwahara

Removal of boron from aqueous solution using zero-
14:45-15:00 IIIA6 (Kyushu Institute of
15:45-16:00 valent magnesium granules
Technology)
14:00-14:15 Bohye Jeon Application and verification of polycrystalline finite
15:00-15:15 IIIA7 (Changwon National element analysis model for prediction of mechanical
16:00-16:15 University) behavior during mini V-bending of magnesium alloy
14:15-14:30 Ryouya Wada
The influence of electrolyte flow and dissolved oxygen
15:15-15:30 IIIA8 (Kyushu Institute of
16:15-16:30 on copper electrorefining
Technology)
Rizaldo Rizky
14:30-14:45 Himawansah Investment Casting Simulation of ASTM F75 Artificial
15:30-15:45 IIIA9 (Sepuluh Nopember Hip Prosthesis with Shell Thickness and Gating
16:30-16:45 Institute of System Geometry Variation
Technology)

10
Student Session III B (21, December) Room 2
12:20-14:45 (Indonesia), 13:20-14:45 (Taiwan), 14:20-15:45 (Korea, Japan)

Chair: Quinones Edgar Daniel (National Taiwan University of Science and Technology), Sijia
Liu (Changwon National University)

Time Speaker Title

12:20-12:35 Koki Iwatani Influence of Plate Deformation around the Nugget on

13:20-13:35 IIIB1 (Kyushu Institute of Tensile Shear Strength of Resistance Spot Welded Lap
14:20-14:35 Technology) Joints
12:35-12:50 Junho Park
Analysis of rapid solidification microstructure in the
13:35-13:50 IIIB2 (Changwon National
14:35-14:50 selective laser melted Inconel 718 alloy
University)
12:50-13:05 Daisuke Kawano
Evaluation of Tensile Strength on Resistance Spot
13:50-14:05 IIIB3 (Kyushu Institute of
14:50-15:05 Welded L-type Joints with Different Arm Length
Technology)
Erika Satriana Study Of Performance And Fatigue Properties Of
13:05-13:20
(Sepuluh Nopember Silicone Rubber/ Poly(Vinyl) Alcohol/Zro2 Materials As
14:05-14:20 IIIB4
15:05-15:20 Institute of Candidate For Nucleus Pulposus Replacement
Technology) Material
Bo-Syuan Hung
13:20-13:35 (National Taiwan
Fabrication of Fiber Electrodes by Electrospinning and
14:20-14:35 IIIB5 University of
15:20-15:35 Their Applications for Smart Clothing
Science and
Technology)
Coffee break : 10min

13:45-14:00 Kousei Kubo

Fiber laser welding of hot-dip galvanized steel sheet
14:45-15:00 IIIB6 (Kyushu Institute of
15:45-16:00 using ring mode waveform
Technology)
14:00-14:15 Tea Yeong Kim The effect of Ti addition and welding process on
15:00-15:15 IIIB7 (Changwon National microstructure and high-temperature mechanical
16:00-16:15 University) properties in RAFM steel
14:15-14:30 Soichiro Futaka
Effects of inclusions on diffusion bonding of carbon
15:15-15:30 IIIB8 (Kyushu Institute of
16:15-16:30 steel
Technology)
Delta Kuncahyo Afif Analysis Of Deformation And Stress On Silicone
14:30-14:45
(Sepuluh Nopember Rubber/Poly(Vinyl Alcohol)/Zro2 Composite As
15:30-15:45 IIIB9
16:30-16:45 Institute of Candidate For Nucleus Pulposus Replacement With
Technology) Finite Element Method

11