Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    Alfian Arisandhi - Tugas UTS - BPBB

    Uploaded by

    Alfian Sandhi
    This document is a homework assignment submitted to fulfill the requirements of the Reinforced Concrete Beam and Slab midterm. It contains the calculations to design a reinforced concrete beam with the following key points: 1. The factored loads are calculated as 53.2 kN/m and 109.6 kN/m. 2. The support reactions are calculated as 246.6 kN, 822 kN, and 246.6 kN. 3. The maximum bending moment is calculated as 483.336 kNm. 4. The beam is designed to resist this bending moment with a cross section of 506.5 mm x 300 mm using 6 D29 rebars.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Alfian Arisandhi - Tugas UTS - BPBB

    Uploaded by

    Alfian Sandhi
    6 views4 pages
    This document is a homework assignment submitted to fulfill the requirements of the Reinforced Concrete Beam and Slab midterm. It contains the calculations to design a reinforced concrete beam with the following key points: 1. The factored loads are calculated as 53.2 kN/m and 109.6 kN/m. 2. The support reactions are calculated as 246.6 kN, 822 kN, and 246.6 kN. 3. The maximum bending moment is calculated as 483.336 kNm. 4. The beam is designed to resist this bending moment with a cross section of 506.5 mm x 300 mm using 6 D29 rebars.

    Original Description:

    Tugas ini mengenai balok dan plat beton bertulang

    Original Title

    Alfian Arisandhi_Tugas UTS_BPBB

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a homework assignment submitted to fulfill the requirements of the Reinforced Concrete Beam and Slab midterm. It contains the calculations to design a reinforced concrete beam with the following key points: 1. The factored loads are calculated as 53.2 kN/m and 109.6 kN/m. 2. The support reactions are calculated as 246.6 kN, 822 kN, and 246.6 kN. 3. The maximum bending moment is calculated as 483.336 kNm. 4. The beam is designed to resist this bending moment with a cross section of 506.5 mm x 300 mm using 6 D29 rebars.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    6 views4 pages

    Alfian Arisandhi - Tugas UTS - BPBB

    Uploaded by

    Alfian Sandhi
    This document is a homework assignment submitted to fulfill the requirements of the Reinforced Concrete Beam and Slab midterm. It contains the calculations to design a reinforced concrete beam with the following key points: 1. The factored loads are calculated as 53.2 kN/m and 109.6 kN/m. 2. The support reactions are calculated as 246.6 kN, 822 kN, and 246.6 kN. 3. The maximum bending moment is calculated as 483.336 kNm. 4. The beam is designed to resist this bending moment with a cross section of 506.5 mm x 300 mm using 6 D29 rebars.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    TUGAS PERTEMUAN KE – 8

    Diajukan Untuk Memenuhi Tugas UTS Mata Kuliah Balok dan Pelat Beton Bertulang

    DOSEN PENGAMPU
    Prijono Bagus Susanto
    NIP. 19621023 198703 1001

    DISUSUN OLEH
    Alfian Arisandhi
    220523600025

    DEPARTEMEN TEKNIK SIPIL DAN PERENCANAAN


    FAKULTAS TEKNIK
    UNIVERSITAS NEGERI MALANG
    MALANG
    2023
    Pertanyaan :

    Penyelesaian :
     Beban terfaktor :
    - q u =¿ 1,4 q D = 1,4 x 38 = 53,2 kN/m
    - q u = 1,2 q D + 1,6 q L = 1,2 x 38 + 1,6 x 4a = 109,6 kN/m.

     Reaksi tumpuan :
    3 3
    - RAV = q =¿ x 109 ,6 x 6=246 ,6 kN
    8 L 8
    5 5
    - RBV = q L = x 109 , 6 x 6=822 kN
    4 4
    - RCV = 246,6 kN

     Momen :
    1
    - M B = RAV x L - x q u x L2
    2
    1
    = 246,6 x 6 - x 109,6 x 6 2 = - 493,2 kNm
    2
    1
    - M max = 246,6 x 2,52 - x 109,6 x 2,52
    2
    = 483,336 kNm.

     Desain balok AB dititik M max = 483,336 kNm


    29
    - d = 600 - 40 - 10 – 29 - = 506,5 mm
    2
    - a = hf = 120 mm
    - Ø M n (sayap) = Ø x 0,85 x f ' c x a x b ¿)
    120
    = 0,9 x 0,85 x 30 x 30 x 120 x 1500 x (506,5 - )
    2
    = 1844,4915 kNm > M u = 483,336 kNm (a < hf).
    Mu 483,336 x 10
    6
    - Ru = 2 = 2 = 1,256 Mpa
    bd 1500 x 506 , 5
    1, 4 1 , 4
    - ρmin = = = 0,0035
    fy 400

    ( )
    '
    30−28
    - ρ b = 0,85 x β1 x f c 600 β1 =0 , 85−0 ,05 ( )
    fy 600+ fy 7

    - ρ b ¿ 0 , 85 x 0,8357 x
    30 600
    400 600+ 400 1 (β =0,8357 )
    - ρ b =0,03197.

    ( )
    fy
    0,0003+
    - ρmaks = Es
    ρb
    0,008
    400
    0,0003+
    - ρmax = 200000 x 0,03197
    0,008
    - ρmax =0,625 x 0,03197
    - ρmax =0,01997
    - ρ pakai = 0,01997.
    - As = ρ bd = 0,01997 x 300 x 506,5 = 3035,778
    Digunakan 6D29 (As = 3960 mm 2).

     Desain balok dititik B =


    - M B =−493 , 2 kNm
    - ρmax =0,01997

    - R u maks =¿ Ø ρmaks 1− ( ρmaks fy


    1,7f ' c )
    Atau :
    - M u1 = R u maks x b x d 2

    - R u maks =0 ,9 x 0,01997 x 1− ( 0,01997 x 400


    1 ,7 x 30 )
    = 0,015158

    - M u maks = 0,015158 x 300 x 506, 52 = 1166,5952 kNm >M u .


    - As pakai = 0,01997 x 300 x 506,5 = 3035,778 mm 2
    Dipakai 6D29 (As = 3960 mm 2 ¿ .

    You might also like