Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    Configuracion Basica Del Switch Con

    Uploaded by

    stevengeovannymoncan
    The document describes the basic configuration of a switch including: 1. Creating VLANs for servers, PCs, phones, and a printer and assigning network interfaces to the appropriate VLANs. 2. Configuring the switchport modes and VLAN assignments for ranges of interfaces. 3. Saving the running configuration to the startup configuration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Configuracion Basica Del Switch Con

    Uploaded by

    stevengeovannymoncan
    10 views4 pages
    The document describes the basic configuration of a switch including: 1. Creating VLANs for servers, PCs, phones, and a printer and assigning network interfaces to the appropriate VLANs. 2. Configuring the switchport modes and VLAN assignments for ranges of interfaces. 3. Saving the running configuration to the startup configuration.

    Original Title

    CONFIGURACION BASICA DEL SWITCH CON

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the basic configuration of a switch including: 1. Creating VLANs for servers, PCs, phones, and a printer and assigning network interfaces to the appropriate VLANs. 2. Configuring the switchport modes and VLAN assignments for ranges of interfaces. 3. Saving the running configuration to the startup configuration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    10 views4 pages

    Configuracion Basica Del Switch Con

    Uploaded by

    stevengeovannymoncan
    The document describes the basic configuration of a switch including: 1. Creating VLANs for servers, PCs, phones, and a printer and assigning network interfaces to the appropriate VLANs. 2. Configuring the switchport modes and VLAN assignments for ranges of interfaces. 3. Saving the running configuration to the startup configuration.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 4

    CONFIGURACION BASICA DEL SWITCH CON:

    -2 PC
    -1 SERVIDOR HTTP
    -1 IMPRESORA
    -2 TELEFONOS IP

    Switch>enable
    Switch#configure terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#interface range fastethernet 0/1 - 7
    Switch(config-if-range)#switchport mode access
    Switch(config-if-range)#switchport access vlan 1
    Switch(config-if-range)#exit
    Switch(config)# vlan 10
    Switch(config-vlan)#name servers

    MONTUFAR STEVEN
    Switch(config-vlan)#exit
    Switch(config)#vlan 20
    Switch(config-vlan)#name pcs
    Switch(config-vlan)#exit
    Switch(config)#vlan 30
    Switch(config-vlan)#name phones
    Switch(config-vlan)#exit
    Switch(config)#clan 40
    ^
    % Invalid input detected at '^' marker.
    Switch(config)#vlan 40
    Switch(config-vlan)#printer
    ^
    % Invalid input detected at '^' marker.
    Switch(config-vlan)#name printer
    Switch(config-vlan)#exit
    Switch(config)#
    %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed


    state to down

    %LINK-5-CHANGED: Interface FastEthernet0/2, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed


    state to up

    Switch(config)#interface range fastethernet 0/5 - 6


    Switch(config-if-range)#switchport access vlan 30
    %LINK-3-UPDOWN: Interface FastEthernet0/4, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed


    state to down

    %LINK-5-CHANGED: Interface FastEthernet0/4, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed


    state to up

    %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed


    state to down

    %LINK-3-UPDOWN: Interface FastEthernet0/4, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed


    state to down

    %LINK-5-CHANGED: Interface FastEthernet0/4, changed state to up

    MONTUFAR STEVEN
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed
    state to up

    %LINK-3-UPDOWN: Interface FastEthernet0/4, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed


    state to down

    %LINK-3-UPDOWN: Interface FastEthernet0/6, changed state to down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed


    state to down

    %LINK-5-CHANGED: Interface FastEthernet0/4, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed


    state to up

    %LINK-5-CHANGED: Interface FastEthernet0/5, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed


    state to up

    %LINK-5-CHANGED: Interface FastEthernet0/6, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/6, changed


    state to up

    Switch(config-if-range)#exit
    Switch(config)#interface range fastethernet 0/1 - 2
    Switch(config-if-range)#switchport access vlan 10
    Switch(config-if-range)#exit
    Switch(config)#interface range fastethernet 0/3 - 4
    Switch(config-if-range)#switchport access vlan 20
    Switch(config-if-range)#exit
    Switch(config)#interface range fastethernet 0/5 - 6
    Switch(config-if-range)#exit
    Switch(config)#iniexit
    Switch#
    %SYS-5-CONFIG_I: Configured from console by console

    Switch#do copy running-config startup-config


    ^
    % Invalid input detected at '^' marker.
    Switch#enable
    Switch#config terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#do copy running-config startup-config
    Destination filename [startup-config]?

    MONTUFAR STEVEN
    Building configuration...
    [OK]
    Switch(config)#end
    Switch#
    %SYS-5-CONFIG_I: Configured from console by console

    Switch#
    ?Bad filename
    %Error parsing filename (Bad file number)
    Switch#
    Switch#copy running-config startup-config
    Destination filename [startup-config]?
    Building configuration...
    [OK]

    MONTUFAR STEVEN

    You might also like