Scribd Logo
Upload

Welcome to Scribd!

  • 72 views

    Assignment 2-1

    Uploaded by

    areej
    This document contains 5 questions regarding load flow analysis techniques: 1) It asks to write down the algorithms for Gauss Seidel and Newton Raphson load flow techniques. 2) It asks to use the Gauss Seidel method to calculate the voltage at bus 2 for a simple power system with a given voltage at bus 1. 3) It asks to use the Gauss Seidel method to obtain the bus voltages for a power system after the first iteration, given the system diagram and data. 4) It asks to use the Newton Raphson load flow method to calculate the solution after 1 iteration for a 3 bus system with specified quantities and constraints, given the system impedances. 5)

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Assignment 2-1

    Uploaded by

    areej
    72 views2 pages
    This document contains 5 questions regarding load flow analysis techniques: 1) It asks to write down the algorithms for Gauss Seidel and Newton Raphson load flow techniques. 2) It asks to use the Gauss Seidel method to calculate the voltage at bus 2 for a simple power system with a given voltage at bus 1. 3) It asks to use the Gauss Seidel method to obtain the bus voltages for a power system after the first iteration, given the system diagram and data. 4) It asks to use the Newton Raphson load flow method to calculate the solution after 1 iteration for a 3 bus system with specified quantities and constraints, given the system impedances. 5)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains 5 questions regarding load flow analysis techniques: 1) It asks to write down the algorithms for Gauss Seidel and Newton Raphson load flow techniques. 2) It asks to use the Gauss Seidel method to calculate the voltage at bus 2 for a simple power system with a given voltage at bus 1. 3) It asks to use the Gauss Seidel method to obtain the bus voltages for a power system after the first iteration, given the system diagram and data. 4) It asks to use the Newton Raphson load flow method to calculate the solution after 1 iteration for a 3 bus system with specified quantities and constraints, given the system impedances. 5)

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    72 views2 pages

    Assignment 2-1

    Uploaded by

    areej
    This document contains 5 questions regarding load flow analysis techniques: 1) It asks to write down the algorithms for Gauss Seidel and Newton Raphson load flow techniques. 2) It asks to use the Gauss Seidel method to calculate the voltage at bus 2 for a simple power system with a given voltage at bus 1. 3) It asks to use the Gauss Seidel method to obtain the bus voltages for a power system after the first iteration, given the system diagram and data. 4) It asks to use the Newton Raphson load flow method to calculate the solution after 1 iteration for a 3 bus system with specified quantities and constraints, given the system impedances. 5)

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    ASSIGNMENT 2

    Q1. Write down the algorithms for:

    a) Gauss Seidel Load flow technique


    b) Newton Raphson Load flow technique.

    Q2. Obtain the voltage at bus 2 for the simple system shown in Fig 1, using the Gauss–Seidel method, if
    V1 = 1.0  00 pu.

    Fig. 1

    Q3. For the power system shown in fig. below, with the data as given in tables below, obtain the bus
    voltages at the end of first iteration, by applying GS method.

    Q4. Consider a 3 bus system, each of the three lines has a series impedance of 0.02+j0.08 pu. and a total
    shunt admittance of j0.02 pu. The specified quantities of buses are:

    Bus Pd Qd Pgi Qgi V


    1 2.0 1.0 unspecified unspecified 1.04+j0.0
    2 0.0 0.0 0.5 1.0
    3 1.5 0.6 0.0 ? 1.04
    Controllable reactive power source is available at bus 3 with 0 ≤ QG3 ≤ 1.5 pu. Find the load flow solution
    using NR load flow method up to 1 iteration.

    Q5. The one-line diagram of a simple power system is shown in Figure 69. Each generator is represented
    by an emf behind the transient reactance. All impedances are expressed in per unit on a common MVA
    base. All resistances and shunt capacitances are neglected. The generators are operating on no load at their
    rated voltage with their emfs in phase. A three-phase fault occurs at bus 1 through a fault impedance of Zf
    = j0.08 per unit. (a) Using Thevenin’s theorem obtain the impedance to the point of fault and the ´ fault
    current in per unit. (b) Determine the bus voltages and line currents during fault.

    You might also like