Scribd
Upload
49 views2 pages

Advefoam 32

ADVEFOAM is an extruded polystyrene thermal insulation board produced in different thicknesses and edge shapes. It has high thermal insulation and compressive strength properties while being resistant to water, chemicals, and fluctuations in weather conditions. ADVEFOAM can provide the same thermal insulation as 10cm of another material but at only 2cm thickness, making it an economical insulation option. It is easily installed using mortar, bitumen latex emulsion, or other adhesives and has various applications including walls, roofs, and cold storage facilities.

Uploaded by

melsabae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views2 pages

Advefoam 32

ADVEFOAM is an extruded polystyrene thermal insulation board produced in different thicknesses and edge shapes. It has high thermal insulation and compressive strength properties while being resistant to water, chemicals, and fluctuations in weather conditions. ADVEFOAM can provide the same thermal insulation as 10cm of another material but at only 2cm thickness, making it an economical insulation option. It is easily installed using mortar, bitumen latex emulsion, or other adhesives and has various applications including walls, roofs, and cold storage facilities.

Uploaded by

melsabae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Sound and Thermal Insulation

ADVEFOAM (32)
Extruded Polystyrene Thermal Insulation Boards .

DESCRIPTION:
ADVEFOAM are thermal insulation boards produced from high quality extruded polystyrene foam and available in different
thicknesses and edge shapes .

FIELDS OF USE:
1- Thermal insulation layers for wals and roofs of buildings .
2- Thermal insulation layers for floors, walls and roofs of cold stores .
3- Upgrading of old roofs .
4- Especially suitable for protected roofing concept, in which the thermal insulation
layer is laid over the waterproofing layer, due to its non- absorbing property .

ADVANTAGES:
1- Permanent and high thermal insulation property .
2- High compressive strength compared to similar materials .
3- Does not absorb water or humidity, due to its closed cell structure .
4- High resistance to chemicals .
5- Longer service time compared to similar materials .
6- High dimensional stability under variable weathering conditions .
7- Easy to cut with wood sawing tools .
8- Low flammability properties, it contains flame retardant additives and itself extinguishes when the source of fire
is removed .
9 - Very safe to use and is not harmful to health .
10 - Economical, the thermal insulation efficiency of 10cm. celton can be obtained by 2cm. ADVEFOAM .

METHOD OF LAYING:
1 - ADVEFOAM boards are laid using cementitious mortar containing 1m3 sand, 300kg. cement, and mixture of
water +addipond with ratio 4:1 or using CEROPLAST (bitumen latex emulsion) or by using any suitable adhesive
not containing solvents .
2 - The bonding layer is applied either on spots or on the complete surface area .

STANDARD DIMENSIONS :
Dimensions (cm) Thickness (mm) Model aspects
25 ±2
30 ± 2
121 * 61 ±2mm
40 ± 2
50 ± 2
30 ±2
121 * 61 ±2mm 40 ±2
50 ±2

* Bigger lengths than 121 are available (on request) .


* Colors : Blue - Gray (other colors available if request)

Chemicals for Modern Building


Head Office:319 El- Haram St., Giza.
Tel: +(202) 35853917 - 35854084 - 35854118 Fax: +(202) 35859858 Great Products
Sound and Thermal Insulation

TECHNICAL DATA (at 25 °C) : ADVEFOAM 32


STANDARD
PROPERTY UNIT VALUE
SPECIFICATIONS

Average Density ASTM D - 1622 - DIN 53420 Kg/m


3

& ISO 845 30 - 32

Thermal Conductivity DIN 52612 W/mK 0.00288 ± 0.002


(Thermal conductivity )5 years ASTM C - 518
aged W/m.°C 0.032 ± 0.002
2
Compressive stress at 10% DIN 53421 Kg /cm 2.5 - 3
deflection ASTM C - 165 KPa 250 - 300
Water vapour diffusion re-
DIN 52615 160 ±5%
sistance factor µ

Water absorption % by volume ASTM 578 %by vol 0.3


Water absorption by capillarity % NIL
Liner coefficient of thermal
expansion and contraction ASTM D - 696 -1
(6.98)X10-5 K
(heat soaking condition)
B1/B2
DIN 4102 (self - extinguishing)
Flammability Building material class
Class (P)
BS 476 Part 5 not easily ignitable

Chemicals for Modern Building


Head Office:319 El- Haram St., Giza.
Tel: +(202) 35853917 - 35854084 - 35854118 Fax: +(202) 35859858 Great Products

You might also like