Scribd Logo
Upload

Welcome to Scribd!

  • 74 views

    Guia - DTU Lite-S

    Uploaded by

    nogumo
    The document provides installation instructions for the DTU-Lite-S device in 3 steps: 1. Check that all items are included and power on the DTU by connecting it to the adapter and a wall socket or power strip. Place the DTU at least 0.5 meters above the ground. 2. Download the mobile app and use it to connect to the DTU's wireless network, then configure internet access by selecting an available WiFi network and entering the password. 3. Complete the installation map by peeling the serial number label from the DTU and affixing it to the map, and filling in system information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Guia - DTU Lite-S

    Uploaded by

    nogumo
    74 views2 pages
    The document provides installation instructions for the DTU-Lite-S device in 3 steps: 1. Check that all items are included and power on the DTU by connecting it to the adapter and a wall socket or power strip. Place the DTU at least 0.5 meters above the ground. 2. Download the mobile app and use it to connect to the DTU's wireless network, then configure internet access by selecting an available WiFi network and entering the password. 3. Complete the installation map by peeling the serial number label from the DTU and affixing it to the map, and filling in system information.

    Original Title

    Guia - DTU Lite-S (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides installation instructions for the DTU-Lite-S device in 3 steps: 1. Check that all items are included and power on the DTU by connecting it to the adapter and a wall socket or power strip. Place the DTU at least 0.5 meters above the ground. 2. Download the mobile app and use it to connect to the DTU's wireless network, then configure internet access by selecting an available WiFi network and entering the password. 3. Complete the installation map by peeling the serial number label from the DTU and affixing it to the map, and filling in system information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    74 views2 pages

    Guia - DTU Lite-S

    Uploaded by

    nogumo
    The document provides installation instructions for the DTU-Lite-S device in 3 steps: 1. Check that all items are included and power on the DTU by connecting it to the adapter and a wall socket or power strip. Place the DTU at least 0.5 meters above the ground. 2. Download the mobile app and use it to connect to the DTU's wireless network, then configure internet access by selecting an available WiFi network and entering the password. 3. Complete the installation map by peeling the serial number label from the DTU and affixing it to the map, and filling in system information.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    DTU-Lite-S Quick Installation Guide

    Important:
    DTU-Lite-S is only compatible with Hoymiles new HMS and HMT series of microinverters.

    1. Interface Layout
    Item Description

    A USB Connector

    B Status Indicator

    C Reset Button A B C

    2. Installation
    A) Check the box for the following items:
    √ Hoymiles DTU-Lite-S
    √ Adapter

    B) Power the DTU-Lite-S


    Option 1 Option 2

    Option 1: Connect the DTU to the


    adapter and plug it into a wall socket

    Option 2: Connect the DTU to the


    adapter and plug it into the power strip.

    Note:
    1. Please make sure that it is placed at least 0.5 meters above the ground, and try to install the DTU at a 90 degrees angle
    perpendicular to the ground.
    2. To prevent signal attenuation, please do not install the DTU directly above metal or concrete.

    3. Online Setting
    A) Plug in the power adapter to energize the DTU. Once the DTU powers on, the red, green and blue lights will flash for
    one second in turn for 30 seconds.

    B) Download the Hoymiles mobile


    installer App.

    C) Use the App to connect to the DTU:

    Open the Installer App on smart


    phone/tablet and log in.
    Click “O&M” at the bottom of the
    page and then click “Network
    Config”.

    Select the DTU's wireless


    network and click “Connect”.
    (The network name of the DTU
    consists of DTUL and product
    serial number, and is not
    password-protected by default.)

    Region: Global AP040462 REV1.1 © 2021 Hoymiles Power Electronics Inc. All rights reserved. 01
    D) Set up Internet

    Go back to “Network Config”


    interface.

    Select “Wi-Fi” and complete the


    Wi-Fi configuration.

    Select an available Wi-Fi and


    enter the password.

    Click “Send to DTU”, and a


    popup box will appear. Confirm
    and exit. Please restart the DTU
    manually and check if DTU light
    stays green.

    Note: After the command is issued


    successfully, DTU will connect to the
    network after 10 minutes. Otherwise
    restart the DTU manually.

    4. Installation Map
    Please complete the installation map.

    A) Peel the serial number label (as circled


    below) from the DTU and affix it to the
    installation map.

    To sheet ______

    Hoymiles Microinverter Installation Map AP040228 V1.3

    Please Make N for North Panel type: Customer Information: DTU Serial Number
    Azimuth:
    Tilt:
    Sheet_____of_____
    COLUMN

    ROW
    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

    B) Complete system information of the


    To sheet ______

    To sheet ______

    installation map as shown on the right. C

    To sheet ______

    5. MI Toolkit 6. Warning
    MI Toolkit is one of the toolkits that come with S-Miles Please complete the online account creation to complete
    Cloud App. It can be used for on-site inspection after the DTU installation (refer to “Quick Installation Guide for
    the PV power station is complete, so that the operation S-miles Cloud Online Registration” for detailed account
    of microinverter can be monitored without Site creation steps).
    Creation. Warning
    For more operation details regarding MI Toolkit, please - Only qualified personnel can install or replace the DTU.
    refer to “User Manual for DTU-Lite-S”. - Do not attempt to repair the DTU by yourself. If the DTU
    breaks down, please contact your distributor for
    maintenance. Disassemble the DTU without permission
    will invalidate the warranty.

    Product information is subject to change without notice. (Please download reference manuals at www.hoymiles.com.)

    Region: Global AP040462 REV1.1 © 2020 Hoymiles Power Electronics Inc. All rights reserved. 02

    You might also like