Scribd
Upload
84 views2 pages

Jha Format

This document provides a job safety analysis for loading and unloading materials using a boom truck at the Neom Construction Project site in Al Khuribah. It identifies potential hazards such as incompetent operators, suspended loads, unauthorized personnel, and defective equipment. Control measures are outlined like only allowing authorized operators with certifications, using certified lifting equipment and accessories, having competent riggers on site during lifts, erecting barricades, and more. Personnel are prohibited from the fall zone and lifts must stop during high winds or over the vehicle's rated capacity. Proper PPE and following traffic rules are also required.

Uploaded by

Hamayon Mushtaq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
84 views2 pages

Jha Format

This document provides a job safety analysis for loading and unloading materials using a boom truck at the Neom Construction Project site in Al Khuribah. It identifies potential hazards such as incompetent operators, suspended loads, unauthorized personnel, and defective equipment. Control measures are outlined like only allowing authorized operators with certifications, using certified lifting equipment and accessories, having competent riggers on site during lifts, erecting barricades, and more. Personnel are prohibited from the fall zone and lifts must stop during high winds or over the vehicle's rated capacity. Proper PPE and following traffic rules are also required.

Uploaded by

Hamayon Mushtaq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Logo JOB SAFTEY ANALYSIS Client logo

Project Name Neom Construction Project JSA NO:- Sample 01


Project Location Al Khuribah

Activity: -Loding and unloading of material

Step Hazard Control Measures


• Incompetent Driver/operator •Only authorised operator to operate boom truck with valid
• Suspended load TUV certificate and driver license.
• Lifting equipment shall only be operated and maintained
• Unauthorized personnel
by qualified personnel such as those designated and
Loading and • Moving vehicles authorized.
unloading of material • Defective tools and equipment • Ensure that lifting equipment and lifting accessories are
using boom truck third party certified.
• Mechanical/hydraulic failure
• Boom truck equipment and riggers must have proof of
• Adverse weather condition
competency third party certifications (TUV).
• Over speeding • Competent rigger should be available on site during
• Overloading of materials and passenger. lifting.
• Collision of vehicles, • A flagman should always be available during use and
transit of the lifting equipment.
• People hit by vehicle.
• Barricades or caution lines, and notices, are erected to
• Incompetent drive and operator. prevent all employees from entering the fall zone.
• Falling of loads and damaged property. • No employees, are permitted in the fall zone.
• Personnel injury. • Swing radius of the crane must be identified and
• Miscommunication of rigger,flagman and operator. barricaded.
• All lifting accessories must be regularly inspected and
third party certified.
• All lifting operations should s top when wind gusts/speed
is above 30km/hr.
• The boom truck must not be operated in excess of its
rated capacity.
• Wear appropriate PPE’S.
• Drive s lowly and follow the traffic rules also use

You might also like