Egr Coolawe

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Technical Service

Information

TSI–07-12-12

Date: July 2007


Subject File: Engine

Subject: EGR Coolant Return Kits

Engine Family: International® DT 466 Diesel Engine


SN Range: 2000001-2030022
Engine Family: International® DT 570 Diesel Engine
SN Range: 2000001-2030022
Engine Family: International® HT 570 Diesel Engine
SN Range: 2000001-2030022

Description Kit prevents coolant leaks from the return circuit of


the EGR cooler. The selection and application of a
New Exhaust Gas Recirculation (EGR) Coolant kit is based on the length of the EGR cooler and the
Return Kits are available for truck and bus installation of the EGR cooler return elbow in the EGR
applications. Installation of an EGR Coolant Return coolant return port.

1
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2007 International Truck and Engine Corporation
Description (cont.)

Figure 1 EGR cooler assembly


1. Reference length: 11.5, 17, or 2. EGR coolant return port 4. Tapped hole (2) for set screws
21 inches 3. Untapped hole (2) for spring clip

Selection of EGR Coolant Return Kit Chart 2 Tapped Set Screw Holes in Coolant
Return Port of EGR Cooler
NOTE: If the return elbow in the coolant return port is
secured with a spring clip, order the correct length kit Length Part Number Table Number
from Chart 1. If the return elbow is secured with two EGR cooler EGR Coolant Kit contents
set screws, order the correct length kit from Chart 2. Return Kit

Chart 1 Untapped Spring Clip Holes in Coolant 11.5 inches 1880272C91 3


Return Port of EGR Cooler 17 inches 1880273C91 4
Length Part Number Table Number 21 inches 1880273C91 4
EGR cooler EGR Coolant Kit contents
Return Kit
11.5 inches 1880270C91 1
17 inches 1880271C91 2
21 inches 1880271C91 2

TSI–07-12-12 2
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2007 International Truck and Engine Corporation
Selection of EGR Coolant Return Kit
(cont.)
Table 1 EGR Coolant Return Kit 1880270C91 Table 3 EGR Coolant Return Kit 1880272C91
Description Qty. Part Description Qty. Part
Number Number
EGR coolant return adapter 1 1855632C1 EGR coolant return adapter 1 1855632C1
tube tube
EGR coolant return hose 1 1855571C1 EGR coolant return hose 1 1855571C1
EGR coolant return elbow 1 1880020C1 EGR coolant return elbow 1 1880319C1
EGR elbow retaining clip 1 1850250C1 EGR elbow retaining clip 1 1850250C1
EGR tube bracket 1 1858107C3 EGR tube bracket 1 1858107C3
Hose clamp 2 1850645C1 Hose clamp 2 1850645C1
O-ring seal 2 1844447C1 O-ring seal 2 1844447C1
Bolt, M10 x 1.5 x 25 mm 1 1817965C1 Bolt, M10 x 1.5 x 25 mm 1 1817965C1
Flat Washer, 3/8 in 1 25724R1 Flat Washer, 3/8 in 1 25724R1
Instruction sheet 1 1171924R1 Instruction sheet 1 1171924R1

Table 2 EGR Coolant Return Kit 1880271C91 Table 4 EGR Coolant Return Kit 1880273C91
Description Qty. Part Description Qty. Part
Number Number
EGR coolant return adapter 1 1855632C1 EGR coolant return adapter 1 1855632C1
tube tube
EGR coolant return hose 1 1855592C1 EGR coolant return hose 1 1855592C1
EGR coolant return elbow 1 1880020C1 EGR coolant return elbow 1 1880319C1
EGR elbow retaining clip 1 1850250C1 EGR elbow retaining clip 1 1850250C1
EGR tube bracket 1 1858107C3 EGR tube bracket 1 1858107C3
Hose clamp 2 1850645C1 Hose clamp 2 1850645C1
O-ring seal 2 1844447C1 O-ring seal 2 1844447C1
Bolt, M10 x 1.5 x 25 mm 1 1817965C1 Bolt, M10 x 1.5 x 25 mm 1 1817965C1
Flat Washer, 3/8 in 1 25724R1 Flat Washer, 3/8 in 1 25724R1
Instruction sheet 1 1171924R1 Instruction sheet 1 1171924R1

3 TSI–07-12-12
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© 2007 International Truck and Engine Corporation

You might also like