Classification: General Business Use

LEXAN™ EXELLDSTP SHEET

PRODUCT DATASHEET

DESCRIPTION
LEXAN™ EXELLDSTP sheet is a textured polycarbonate sheet with UV protection on both sides, offering excellent light diffusion
without transparency. It has an excellent impact resistance, an excellent fire performance, ease of handling and installation and is
an excellent candidate for wide variety of exterior and interior applications such as balcony and staircase glazing.

TYPICAL PROPERTY VALUES

PROPERTY TEST METHOD UNITS VALUE

PHYSICAL
Density ISO 1183 g/cm³ 1.2
Water Absorption, (23°C/sat) ISO 62 % 0.35
Moisture Absorption (23°C / 50% RH) ISO 62 % 0.15

MECHANICAL
Tensile Stress, yield, 50 mm/min ISO 527 MPa 63
Tensile Strain, yield, 50 mm/min ISO 527 % 6
Tensile Strain, break, 50 mm/min ISO 527 % 120
Tensile Modulus, 1 mm/min ISO 527 MPa 2350
Flexural Stress, yield, 2 mm/min ISO 178 MPa 90
Flexural Modulus, 2 mm/min ISO 178 MPa 2300

IMPACT
Izod Impact, unnotched 80*10*3 +23°C ISO 180/1U kJ/m² NB
Izod Impact, notched 80*10*3 +23°C ISO 180/1A kJ/m² 70
Charpy Impact, notched, 23°C ISO 179/2C kJ/m² 35

THERMAL
Thermal Conductivity ISO 8302 W/m-°C 0.2
CTE, 23°C to 80°C, flow ISO 11359-2 1/°C 7x10-5
Ball Pressure Test, 125°C +/- 2°C IEC 60695-10-2 - PASS
Vicat Softening Temp, Rate B/120 ISO 306 °C 145
Relative Temp Index, Elec UL 746B °C 130
Relative Temp Index, Mech w/impact UL 746B °C 130
Relative Temp Index, Mech w/oimpact UL 746B °C 130

Electrical
Volume Resistivity IEC 60093 Ohm-cm >1015
Dielectric Strength, in oil, 3.2 mm IEC 60243-1 kV/mm 17

 These property values have been derived from resin data for the material used to produce this sheet product. Variation within normal tolerances
are possible for various colors. These typical values are not intended for specification purposes. If minimum certifiable properties are required,
please contact your local SABIC, Functional Forms representative. All values are measured at least after 48 hours storage at 23°C/50% relative
humidity. All properties are measured on injection-molded samples. All samples are prepared according ISO 294.
™ Trademarks of SABIC.

Chemical Resistance
LEXAN EXELLDSTP sheet has sufficient resistance to most chemical substances encountered in normal exterior use. In applications
where the product will come into contact with aggressive chemicals, specific (application related) testing of the material is always
advised. It is essential to check the compatibility before use.

1
Classification: General Business Use

Light Transmission
Transparent LEXAN™ EXELLDSTP sheet have light transmission of Min.72% depending on thickness. However, for buildings in hot
climates or with south facing aspects, LEXAN EXELLDSTP sheet is available in bronze have light transmission for all thickness with
Min.47% to Max.53%. LEXAN EXELLDSTP is essential opaque to all wavelengths below 385 nanometers. This useful shielding
property can help prevent discoloration of sensitive materials placed under or behind LEXAN EXELLDSTP sheet.

UV Protection
LEXAN EXELLDSTP sheet has proprietary UV protected surfaces, giving excellent durability to outdoor weathering. This superior
UV resistance and toughness of LEXAN EXELLDSTP sheet is backed by a 10 years limited written warranty against yellowing, loss of
light transmission and breakage. See Warranty for exact details.

Fire Performance
LEXAN EXELLDSTP sheet has good fire behaviour characteristics. LEXAN sheet does not contribute significantly to the spread of
fire or to the generation of toxic gases. For details, please contact your local sales office

Product Availability •)
Product code LEXAN™ EXELLDSTP Sheet
Gauge 2, 3, 4 mm
Standard width 1220 and 2050 mm
Standard length 30500mm for 2 & 3 mm and 12200mm for 4mm only. Both available in Roll form only
Textures Polished one side, pebble texture on reverse
Masking LEXAN printed masking on one side (Polished)
Colors Clear code 112, bronze code 515081

•) LEXAN EXELLDSTP sheet can be supplied by prior arrangements in non - standard widths, lengths and color. Such arrangements
may affect prices, terms and/or other conditions of sales and are subject to minimum order quantities.

*For more specific details, please refer India Product Guide.

CONTACT US:
SABIC CORPORATE HQ AMERICAS EUROPE ASIA PACIFIC
PO Box 5101 SABIC SABIC SABIC
Riyadh 11422 Functional Forms Functional Forms Functional Forms
Saudi Arabia 2500 City West Boulevard Plasticslaan 1 2550 Xiupu Road
T +966 (0) 1 225 8000 Suite 100 4612 PX Pudong
F +966 (0) 1 225 9000 Houston, TX 77042 Bergen op Zoom 201319 Shanghai
E [email protected] USA The Netherlands China
Toll-free (800) 323 3783 T +31 (0)164 293684 T +86 21 3222 4500
F (888) 443 2033 F +31 (0)164 292272 F +86 21 6289 8998
E [email protected] E [email protected] E [email protected]

INDIA INDIA INDIA INDIA

NORTH REGIONAL OFFICE WEST REGIONAL OFFICE SOUTH REGIONAL OFFICE CHENNAI OFFICE
10th Floor, Ambiance Corporate Solitaire Corporate Park Block B5, Plot No. 81 to 85 9C EGA Trade Centre
Towers II Building 7, 8th Floor, Unit 1 Chikkadunnasandra Village, Poonmalle High Road,
Ambiance Island, Andheri Ghatkopar Link Road, Anekal Taluk Kilpak Chennai 600010, India
Gurgaon 122001, AndheriEast, Off Sarjapura-AttibeleState Highway T (044) 3026 8274/75/76
Haryana, India Mumbai 400093, India Bangalore 562125, India F (044) 4285 8905
T : +91 124 4746100 T (022) 42481800 T (91) 80-67725000 E [email protected]
E [email protected] F (022) 42481802 F (91) 80-67725007
E [email protected] E [email protected]

DISCLAIMER: THE MATERIALS, PRODUCTS AND SERVICES OF SAUDI BASIC INDUSTRIES CORPORATION (SABIC) OR ITS SUBSIDIARIES OR AFFILIATES (“SELLER”) ARE SOLD SUBJECT TO
SELLER’S STANDARD CONDITIONS OF SALE, WHICH ARE AVAILABLE UPON REQUEST. INFORMATION AND RECOMMENDATIONS CONTAINED IN THIS DOCUMENT ARE GIVEN IN GOOD
FAITH. HOWEVER, SELLER MAKES NO EXPRESS OR IMPLIED REPRESENTATION, WARRANTY OR GUARANTEE (i) THAT ANY RESULTS DESCRIBED IN THIS DOCUMENT WILL BE OBTAINED
UNDER END-USE CONDITIONS, OR (ii) AS TO THE EFFECTIVENESS OR SAFETY OF ANY DESIGN OR APPLICATION INCORPORATING SELLER’S MATERIALS, PRODUCTS, SERVICES OR
RECOMMENDATIONS. UNLESS OTHERWISE PROVIDED IN SELLER’S STANDARD CONDITIONS OF SALE, SELLER SHALL NOT BE RESPONSIBLE FOR ANY LOSS RESULTING FROM ANY USE OF
ITS MATERIALS, PRODUCTS, SERVICES OR RECOMMENDATIONS DESCRIBED IN THIS DOCUMENT. Each user is responsible for making its own determination as to the suitability of Seller’s
materials, products, services or recommendations for the user’s particular use through appropriate end-use and other testing and analysis. Nothing in any document or oral statement shall be deemed
to alter or waive any provision of Seller’s Standard Conditions of Sale or this Disclaimer, unless it is specifically agreed to in a writing signed by Seller. Statements by Seller concerning a possible use of
any material, product, service or design do not, are not intended to, and should not be construed to grant any license under any patent or other intellectual property right of Seller or as a
recommendation for the use of any material, product, service or design in a manner that infringes any patent or other intellectual property right.

SABIC and brands marked with ™ are trademarks of SABIC or affiliates.

© Copyright 2019. All rights reserved.
†
Any brands, products or services of other companies referenced in this document are the trademarks,
service marks and/or trade names of their respective holders.

2 www.sabic.com/sfs