Coil

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

MODEL 12 VDC coil with ISO/DIN 43650, Form A connector

770-212

snhy.com/770-212

TECHNICAL DATA

Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC)


Arc Suppression Standard
Power Consumption (cold) - at rated voltage 22 watts
Maximum Ambient Temperature 122 °F
Voltage/Frequency 12 VDC
Operating Voltage Range +/- 10% nominal
Duty cycle Rating 100 %
Connector ISO/DIN 43650, Form A, 3-pin
Connector Environment Rating IP65/IP67
Coil Nut Torque 4.5 lbf in.

PROPORTIONAL PERFORMANCE DATA

Maximum Current 1150 mA


Nominal Coil Resistance at 122ºF (50ºC) Stabilized 9.4 ±8% ohms
Nominal Coil Resistance at 68ºF (20ºC) Cold 6.4 ±8% ohms

USED WITH

DAAL DAALS DBAL DBALS DFCA DFCB DFDA DFDB DFEA DFEB
DFFA DFFB DLDA DLDAS DLDAZ DMDA DMDAS DMDAZ DNCA DNCAZ
DNDA DNDAS DNDC DNDY DNDYS DTCA DTCAZ DTDA DTDAS DWDA
FMDA FMDB FPCC FPCH FPFK FPHK HDDA PRDL PRDM PRDN
PRDP PSDL PSDP RBAN RBAP

TECHNICAL FEATURES

Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage: 68V. Model code 1.5 KE68CA Steady state power dissipation @ 75°C is 6.5 W
and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.
Power cable with mating connector is required and is not included with product.
This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.
The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.

Created on 02/25/2016 c 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2
IP rating is dependent on the coil connector and the mating connector used.
RoHS compliant. Restricted materials less than 0.1% total by weight.
The external steel shell is zinc plated with black dichromate.

Created on 02/25/2016 c 2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 2

You might also like