DTL - 51.02 Sto - Panel - Classic - XPS - Ci - EN

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

StoPanel XPS ci

StoGuard® Air & Glass Mat Gypsum Sheathing Detail No.: 51.02
Water-Resistive Barrier (Compliance with ASTM C 1177) Date: March 2022
Page: 1 of 2
Steel Frame
XPS Insulation Board
(See Note #3) Notes:
1. StoPanel® XPS ci is a
lightweight energy efficient
Sto TurboStick™ pre-fabricated exterior wall
Adhesive panel with XPS continuous
(See Note#2) insulation, continuous air
barrier, and can be finished
with a wide variety of standard
and specialty Sto textured
finish options.
StoGuard®
Edge and Joint Treatment 2. Vertical ribbons to provide
channels for drainage.

3. XPS insulation options:

-Owens Corning Foamular®


Sto BTS Xtra Basecoat CI-C Extruded Polystyrene
with Sto Mesh embedded
-Dow STYROFOAM™
Panel Core 20 Extruded
Polystyrene
Sto Primer
4. Components not identified
as Sto are furnished by other
manufacturers and are not
necessarily installed by trades
who install the Sto products.
Refer to project specific
contract documents.
Sto Finish

StoGuard® Air &


Water-Resistive
Barrier Coating

U.S. Patent No.8,919,062 B1

ATTENTION Property of Sto Corp. All Rights Reserved. www.stopanel.com

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a
qualified design professional, general contractor or builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp.
disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or by unqualified persons or entities, or as part of an improperly
designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities beyond Sto’s control.
Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products,
and to the structure of the building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND
ACCEPTED BY BUILDING OWNERS IN ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME.
For the fullest, most current information on proper application, clean-up, mixing and other specifications and warranties, cautions and disclaimers, please refer to
the Sto Corp. website, www.stocorp.com.
StoPanel Classic NExT ci
®

Detail No.: 51.02


Date: March 2022
Page: 2 of 2

Notes:
1. StoPanel® XPS ci is a
lightweight energy efficient
pre-fabricated exterior wall
panel with XPS continuous
insulation, continuous air
barrier, and can be finished
with a wide variety of
standard and specialty Sto
textured finish options.

2. Vertical ribbons to provide


channels for drainage.

3. XPS insulation options:

-Owens Corning Foamular®


CI-C Extruded Polystyrene

-Dow STYROFOAM™
XPS Insulation Board Panel Core 20 Extruded
(See Note #3) Polystyrene

4. Components not identified


as Sto are furnished by other
manufacturers and are not
necessarily installed by trades
who install the Sto products.
Sto Wedge Refer to project specific
Patented integral drainage contract documents.
at bottom of panel

Sto Wedge

StoGuard® Edge
Treatment
Weep Tube
(Set in Sto TurboStick™)

U.S. Patent No.8,919,062 B1

ATTENTION Property of Sto Corp. All Rights Reserved. www.stopanel.com

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a
qualified design professional, general contractor or builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp.
disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or by unqualified persons or entities, or as part of an improperly
designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities beyond Sto’s control.
Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products,
and to the structure of the building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND
ACCEPTED BY BUILDING OWNERS IN ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME.
For the fullest, most current information on proper application, clean-up, mixing and other specifications and warranties, cautions and disclaimers, please refer to
the Sto Corp. website, www.stocorp.com.

You might also like