IMH21

NPN 600mA 20V Digital Transistors (Bias Resistor Built-in Transistors) For Muting. Datasheet

Outline
Parameter Tr1 and Tr2 SMT6
(4)
(5)
VCEO 20V (6)

VEBO 12V (3)

(2)
(1)
IC 600mA
IMH21
R1 10k SOT-457 (SC-74)

Features
1) Built-In Biasing Resistors
2) Two DTC614T chips in one package.
3) Low saturation voltage, typically
VCE(sat) =40mV at IC / IB=50mA / 2.5mA, makes these
transistors ideal for muting circuits.
4) These transistors can be used at high current levels,
IC=600mA. Inner circuit
5) Built-in bias resistors enable the configuration of Collector Base Emitter
(4) (5) (6)
an inverter circuit without connecting external
input resistors (see equivalent circuit). R1
6) The bias resistors consist of thin-film resistors
R1
with complete isolation to allow negative biasing
of the input. They also have the advantage of
(3) (2) (1)
completely eliminating parasitic effects. Emitter Base Collector
7) Lead Free/RoHS Compliant. R1=10kΩ

Application
Muting circuit

Packaging specifications
Package Basic
Taping Reel size Tape width
Part No. Package size ordering Marking
code (mm) (mm)
(mm) unit (pcs)
IMH21 SMT6 2928 T110 180 8 3,000 H21

www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved. 2014.10 - Rev.C

Downloaded from: http://www.datasheetcatalog.com/

 IMH21 Data Sheet

Absolute maximum ratings (Ta = 25°C)

<For Tr1 and Tr2 in common>
Parameter Symbol Values Unit
Collector-base voltage VCBO 20 V
Collector-emitter voltage VCEO 20 V
Emitter-base voltage VEBO 12 V
IC 600 mA
Collector current
ICP *1 1 A
Power dissipation PD *2 300(Total)
*3
mW
Junction temperature Tj 150 °C
Range of storage temperature Tstg 55 to 150 °C

Electrical characteristics (Ta = 25°C)

<For Tr1 and Tr2 in common>
Parameter Symbol Conditions Min. Typ. Max. Unit
Collector-base breakdown voltage BVCBO IC= 50A 20 - - V
Collector-emitter breakdown voltage BVCEO IC= 1mA 20 - - V
Emitter-base breakdown voltage BVEBO IE= 50A 12 - - V
Collector cut-off current ICBO VCB = 20V - - 0.5 A
Emitter cut-off current IEBO VEB = 12V - - 0.5 A
Collector-emitter saturation voltage VCE(sat) IC / IB= 50mA / 2.5mA - 40 150 mV
DC current gain hFE VCE= 5V, IC= 50mA 820 - 2700 -
Input resistance R1 - 7 10 13 k

VCE = 10V, IE = 50mA

Transition frequency fT *4 - 150 - MHz
f = 100MHz


VI = 5V
Output ON Resistance Ron - 0.9 -
RL = 1k, f = 1kHz
*1 PW=10ms, Single pulse
*2 Each terminal mounted on a reference footprint
*3 200mW per element must not be exceeded.
*4 Characteristics of built-in transistor

www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved. 2014.10 - Rev.C

Downloaded from: http://www.datasheetcatalog.com/

 IMH21 Data Sheet

Electrical characteristic curves(Ta = 25°C)

Fig.1 Grounded emitter propagation Fig.2 Grounded emitter output

characteristics characteristics
IB= 1.0mA 0.9mA
10 600 0.8mA
VCE= 5V Ta=25ºC 0.7mA

COLLECTOR CURRENT : IC [mA]

COLLECTOR CURRENT : Ic [mA]

0.6mA
1 0.5mA
400
0.4mA

0.1 0.3mA

200 0.2mA

0.01 Ta=100ºC

40ºC
25ºC 0.1mA

0.001 0 0A
0 0.2 0.4 0.6 0.8 1 0 2 4 6 8 10

BASE TO EMITTER VOLTAGE : VBE [V] COLLECTOR TO EMITTER VOLTAGE : VCE [V]

Fig.3 DC Current gain Fig.4 Collector-emitter saturation voltage

vs. Collector Current vs. Collector Current
10000 10000
VCE= 5V IC/IB=20
COLLECTOR SATURATION
DC CURRENT GAIN : hFE

VOLTAGE : VCE(sat) [mV]

1000

1000 100
Ta= 100°C
Ta= 100°C
25°C
25°C
−40°C
−40°C
10

100 1
0.1 1 10 100 1000 0.1 1 10 100 1000

COLLECTOR CURRENT : IC [mA] COLLECTOR CURRENT : IC [mA]

www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved. 2014.10 - Rev.C

Downloaded from: http://www.datasheetcatalog.com/

 IMH21 Data Sheet

Electrical characteristic curves(Ta = 25°C)

Fig.5 Output ON resistance

vs. input voltage
1000
Ta= 25°C
f=1MHz
OUTPUT ON RESISTANCE : Ron []

RL=1kΩ
100 hFE=250 (5V/50mA)

10

0.1
0.1 1 10 100

INPUT VOLTAGE : VI [V]

Fig.6 Ron measurement circuit.

Vo
RL=1kΩ Ron= ×RL
Vi-VO

D.U.T.
INPUT
Vi
100mV(rms)
~ VI
V
~
OUTPUT
VO
f=1kHz

www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved. 2014.10 - Rev.C

Downloaded from: http://www.datasheetcatalog.com/

 IMH21 Data Sheet

Dimensions (Unit : mm)

A
e
SMT6

p
A
A
e

e
A

l
A

Pattern of terminal position areas

[Not a recommended pattern of soldering pads]

AX AX
A
A
A

AX AX

e
l
Dimension in mm / inches

www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved. 2014.10 - Rev.C

Downloaded from: http://www.datasheetcatalog.com/

 Notice

Notes
1) The information contained herein is subject to change without notice.

2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions :

3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.

4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.

5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.

6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.

7) The Products specified in this document are not designed to be radiation tolerant.

8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.

9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.

10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.

11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.

12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.

13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.

14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.

Thank you for your accessing to ROHM product informations.

More detail product informations and catalogs are available, please contact us.

ROHM Customer Support System

http://www.rohm.com/contact/

www.rohm.com
© 2014 ROHM Co., Ltd. All rights reserved.
R1102A

Downloaded from: http://www.datasheetcatalog.com/

 This datasheet has been downloaded from:

www.DatasheetCatalog.com

Datasheets for electronic components.

Downloaded from: http://www.datasheetcatalog.com/