Scribd
Upload
53 views2 pages

Calculation MOL

This document is a calculation sheet for recertifying an existing 12" pipeline owned by PT Pertamina EP Regional 2 Zona 7. It contains pipeline data like design pressure, temperature, material grade, dimensions, and inspection history. Calculations are shown to determine the minimum required thickness, allowable pressure, corrosion rate, and remaining life of the pipeline. The results indicate the selected thickness is satisfactory, the MAOP of 250 psig can be used, the corrosion rate is 0.006 inches/year, and the pipeline has a remaining life of 42.6 years.

Uploaded by

Irsyad Rosyidi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views2 pages

Calculation MOL

This document is a calculation sheet for recertifying an existing 12" pipeline owned by PT Pertamina EP Regional 2 Zona 7. It contains pipeline data like design pressure, temperature, material grade, dimensions, and inspection history. Calculations are shown to determine the minimum required thickness, allowable pressure, corrosion rate, and remaining life of the pipeline. The results indicate the selected thickness is satisfactory, the MAOP of 250 psig can be used, the corrosion rate is 0.006 inches/year, and the pipeline has a remaining life of 42.6 years.

Uploaded by

Irsyad Rosyidi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PT PJ-TEK MANDIRI

CALCULATION SHEET
ASME B31.4
OWNER : PT Pertamina EP Regional 2 Zona 7
SUBJECT : Existing / New Installation (Replacement)
DESCRIBE : Migas PLO Certification
PIPELINE : Pipeline 12” XAP Process Platform to Terminal Balongan

PIPELINE DATA
Design Press. (P) : 250 psig
MAOP : 250 psig
o
Design Temperature (T) : 200 F / 93.33 o
C
Design Factor (F) : 0.72
Longitudinal Joint Factor (E) : 1.00
Temp. Derating Factor (T) : 1.00
Year Built : 2013
Date of inspection : 2023
Last Inspection : 2020
Year of Recertification (Next Insp.) : 4 years

Material : API 5L Grade X52 PSL-2 MO


Yield Strength (S) : 52,000 psig
Diameter (OD) : 12.750 inch : 323.9 mm
Nominal Thickness ( tnom ) : 0.500 inch : 12.70 mm
Previous Thickness ( tprev ) : 0.330 inch : 8.38 mm
Act Thickness ( tact ) : 0.311 inch : 7.90 mm (dari hasil UT onshore)
Corrosion Allowance ( CA ) : #VALUE! Inch

CALCULATION

Minimum Thickness

Required Thickness of Pipeline :

P.D 250 x 12.750


treq = = = 0.043 inch
2.S(F.E.YS) 2x 0.72 x 1.00 x 52,000
= 1.080 mm

Result : The selected thickness is Satisfactory

Page 1 of 2
PT PJ-TEK MANDIRI
CALCULATION SHEET
ASME B31.4
OWNER : PT Pertamina EP Regional 2 Zona 7
SUBJECT : Existing / New Installation (Replacement)
DESCRIBE : Migas PLO Certification
PIPELINE : Pipeline 12” XAP Process Platform to Terminal Balongan

Allowable Pressure (P)

2.S.tact
P = x F.E.T
D

2 x 52,000 x 0.311
= x 0.72 x 1.00 x 1.00
12.750

= 1,826 psig
= 128.38 kg/cm2g

Pressure Limit For Flange = 1315 psig


92.44 kg/cm2g
Conclusion
MAOP used = 250 psig Satisfactory

Corrosion Rate for Pipeline

Long Term Corrotion Rate


tint - tact 0.500 - 0.311
CR = = = 0.019 inch/year
years between tint and tact 10
= 0.480 mm/year

Short Term Corrotion Rate


tprev - tact 0.330 - 0.311
CR = = = 0.006 inch/year
years between tprev and tact 3
= 0.160 mm/year
Conclusion
Corrosion rate (CR) = 0.006 inch/year
= 0.160 mm/year

Remaining Life (RL)

tact - treq 0.311 - 0.043


Remaining Life Pipeline = = = 42.6 years
CR 0.006

Page 2 of 2

You might also like