Phase Filler RM17TE00 - DATASHEET - US - en-US

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Product data sheet RM17TE00

Characteristics Zelio, 3 phase supply control relay, range 208


to 480 VAC, sequence, phase failure, phase
imbalance, voltage

Product availability: Stock - Normally stocked in distribution facility

Price*: 217.00 USD

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. *Prices are indicative
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Main
Range of product Zelio Control
Product or component type Modular measurement and control relays
Relay type Multifunction control relay
Product specific application For 3-phase supply
Relay name RM17TE
Relay monitored parameters Undervoltage and overvoltage in window mode
Asymmetry
Phase sequence
Phase failure detection
Time delay type Adjustable 0.1...10 s, +/- 10 % of the full scale value
Switching capacity in VA 1250 VA
Measurement range 208...480 V voltage AC

Complementary
Reset time 1500 Ms time delay
Maximum switching voltage 250 V AC
250 V DC
Minimum switching current 10 MA 5 V DC
Maximum switching current 5 A AC
5 A DC
Supply voltage limits 183…528 V AC
Control circuit voltage limits - 12 % + 10 % Un
Power consumption in VA 0…22 VA 400 V AC 50 Hz
Control circuit frequency 50...60 Hz +/- 10 %
Output contacts 1 C/O
Nominal output current 5A
Measurement voltage limits 183…528 V AC
Hysteresis 2%
Run-up delay at power-up 650 Ms

Aug 27, 2020


1
Maximum measuring cycle 150 Ms measurement cycle as true rms value
Threshold adjustment voltage -2...-17 % in the range 220 V AC
+2...+17 % in the range 480 V AC
-2...-12 % in the range 208 V AC
2...20 % of Un selected
Voltage range 208...480 V phase to phase
Adjustment of asymmetry threshold 5...15 % of Un selected
Repeat accuracy 0.5 % input and measurement circuit
3 % time delay
Measurement error < 0.05 %/°C with temperature variation
< 1 % over the whole range with voltage variation
Phase failure sensitivity 0.7 Un
Response time < 200 ms in the event of a fault)
Marking CE
Overvoltage category III IEC 60664-1
Insulation resistance > 500 MOhm 500 V DC IEC 60255-5
> 500 MOhm 500 V DC IEC 60664-1
[Ui] rated insulation voltage 400 V IEC 60664-1
Supply frequency 50/60 Hz +/- 10 %
Operating position Any position without derating
Connections - terminals Screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
Tightening torque 5.31…8.85 Lbf.In (0.6…1 N.m) IEC 60947-1
Housing material Self-extinguishing plastic
Local signalling Power ON LED green)
Relay ON LED yellow)
Mounting support 35 mm symmetrical DIN rail EN/IEC 60715
Electrical durability 100000 Cycles
Mechanical durability 30000000 Cycles
Operating rate <= 360 operations/hour full load
Utilisation category AC-12 IEC 60947-5-1
AC-13 IEC 60947-5-1
AC-14 IEC 60947-5-1
AC-15 IEC 60947-5-1
DC-12 IEC 60947-5-1
DC-13 IEC 60947-5-1
Safety reliability data MTTFd = 502.2 years
B10d = 470000
Maximum Width 0.69 In (17.5 mm)
Net Weight 0.29 Lb(US) (0.13 kg)

Environment
Electromagnetic compatibility Emission standard for industrial environments EN/IEC 61000-6-4
Emission standard for residential, commercial and light-industrial environ-
ments EN/IEC 61000-6-3
Immunity for industrial environments EN/IEC 61000-6-2
Standards EN/IEC 60255-1
Product certifications GOST
C-tick
CSA
UL
GL
Directives 89/336/EEC - electromagnetic compatibility
73/23/EEC - low voltage directive
Ambient air temperature for storage -40…158 °F (-40…70 °C)
Ambient air temperature for operation -4…122 °F (-20…50 °C)
Relative humidity 95 % 131 °F (55 °C) IEC 60068-2-30

2
Vibration resistance 0.35 mm 5…57.6 Hz)IEC 60068-2-6
1 gn 57.6…150 Hz)IEC 60255-21-1
Shock resistance 15 gn 11 ms IEC 60255-21-1
IP degree of protection IP20 IEC 60529 terminals)
IP30 IEC 60529 casing)
Pollution degree 3 IEC 60664-1
Dielectric test voltage 2 KV AC 50 Hz, 1 min IEC 60255-5
2 KV AC 50 Hz, 1 min IEC 60664-1
Non-dissipating shock wave 4 KV IEC 60255-5
4 KV IEC 60664-1
4 KV IEC 61000-4-5

Ordering and shipping details


Category 22380 - RELAYS-MEASUREMENT (RM17-RM35)
Discount Schedule CP2
GTIN 00785901662181
Nbr. of units in pkg. 1
Package weight(Lbs) 0.2 Lb(US) (0.09 kg)
Returnability Yes
Country of origin ID

Packing Units
Unit Type of Package 1 PCE
Package 1 Height 1.06 In (2.7 cm)
Package 1 width 3.03 In (7.7 cm)
Package 1 Length 3.78 In (9.6 cm)
Unit Type of Package 2 S02
Number of Units in Package 2 48
Package 2 Weight 11.06 Lb(US) (5.017 kg)
Package 2 Height 5.91 In (15 cm)
Package 2 width 11.81 In (30 cm)
Package 2 Length 15.75 In (40 cm)

Offer Sustainability
Sustainable offer status Green Premium product
EU RoHS Directive
Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration
Mercury free Yes
RoHS exemption information
Yes
China RoHS Regulation
China RoHS Declaration
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End Of Life Information
WEEE The product must be disposed on European Union markets following speci-
fic waste collection and never end up in rubbish bins.

Contractual warranty
Warranty 18 months

3
Product data sheet RM17TE00
Dimensions Drawings

Multifunction 3-Phase Supply Control Relays

Dimensions and Mounting

4
Product data sheet RM17TE00
Connections and Schema

Multifunction 3-Phase Supply Control Relays

Wiring Diagram

5
Product data sheet RM17TE00
Technical Description

Function Diagrams

Phase Sequence Control, Phase Failure Detection (U measured < 0.7 x nominal supply voltage) and Asymmetry
Detection

Control of Overvoltage and Undervoltage in Window Mode

Legend
A Asymmetry thershold (adjustble from 5...15% of the nominal supply voltage)
Tt Time delay after crossing of threshold (adjustable on front panel)
H Hysteresis
U> Overvoltage threshold
U< Undervoltage threshold
L1, L2, L3 Phases of the supply voltage monitored
11-12, 11-14 Output relay connections (refer to Connections and Schema)
Relay status: black color = energized.

Product Life Status : Commercialised

You might also like