ZM110

DIGITAL BENCH SERIES

ZM110 (400 mm
x 500 mm)

ZM110 (400 mm x 400 mm)

ZM110 (500 mm x 600 mm)

DESCRIPTION
The ZM110 can be supplied as a trade approved bench Base Construction: With 150% overload protection,
scale system at 3,000 divisions as well as 6,000 divisions powder coated tubular base frames constructed of mild
for applications where trade approval is not required. As a steel, and four corner stops the load cell are well-protected.
system, the base combines with a pole-mounted indicator The base frame is fitted with four large, lockable, adjustable
that can be used for a wide range of general purpose floor anti-slip feet ideal for leveling the base if positioned on
or bench base type applications. uneven ground.
General Weighing: Designed to weigh in lb, kg, or pieces, Load Cell: This base is fitted with a robust, R60 C3 approved,
the ZM110 can easily be set into sample mode - ideal for aluminum IP66 load cell.
counting a wide range of medium sized components. Top Pan: The base is fully covered with a removable,
Checkweighing & Check Counting: Ideal for guaranteeing hard-wearing, food grade 304 stainless steel top pan.
product or box quantities are within an agreed weight Indicator Construction: The ABS housed Avery
or count size and for repetitive packing applications, Weigh-Tronix ZM110 Indicator has a large, easy-to-read
the ZM110 easily switches between general weighing, 50 mm x 165 mm LCD backlit display with 40 mm high
checkweighing, and check counting. digits and built-in battery that allows this product to be used
in low lit areas or in areas where power outlets are hard to
find. The ZM110 can provide over 107 hours of battery life
between charges.

SPECIFICATIONS
GENERAL
Operating Applications General weighing in both kg, lb, Pieces, Basic Counting, Check Counting, Checkweighing
Capacities , Resolutions & 6000d unapproved 3000d EC approved E2 Stamped
Base Dimensions (L x W) 400 mm x 400 mm base - 60 kg x 0.01 kg 400 mm x 400 mm base - 60 kg x 0.02 kg
400 mm x 500 mm base - 150 kg x 0.02 kg 400 mm x 500 mm base - 150 kg x 0.05 kg
400 mm x 500 mm base - 300 kg x 0.05 kg 400 mm x 500 mm base - 300 kg x 0.1 kg
500 mm x 600 mm base - 300 kg x 0.05 kg 500 mm x 600 mm base - 300 kg x 0.1 kg
Approved Resolution 3000 divisions EC & OIML approved (Class III)
Minimum and Maximum 87 to 1100 ohms
Load Cell Impedance
Calibration Three points stored (Zero, Span and one optional linerization point if needed)
Analog to Digital Configurable from 7.5 to 30 Hz. Default 15 Hz.
Measurement Rate
Unit of Measure Allows up to two units of measure plus piece counting (kg, pounds, grams, pounds/ounces). Primary unit of measure
kg.
Capacity Selections Configurable 999,999 with decimal located zero to five places
ZM110 DIGITAL BENCH SERIES Technical Specification
GENERAL
Division increment 1 to 50 in multiples and sub-multiples of 1, 2, 5
Auto Zero Tracking Configurable +/- 0 to 5 divisions
Overload Protection 150% overload protection
Gravity Setting Allows a different gravity to be entered into the scale after calibration
Power Requirements Supplied with a switching power adapter with interchangeable plug ends to cover UK, EU and Australian plug
requirements input 100 - 240 volt ~ 50/60 Hz, 0.4A Max output voltage 12 VDC, 1000mA with positive centre
Battery Built-in Lead Acid battery (DJW6-4.0 6V 4.0AH) to give up to 107 hours between recharges
Power Save Options Configurable backlight settings to turn off backlight. When scale is sitting stable for long periods of time, any movement
will turn the backlight back on. Auto off feature can be set to turn off the scale when not in use. Auto off from off to 99
minutes.
Enclosure Housed in a tough, black, ABS enclosure with rear external battery cover with battery installed. Also supplied with
detachable, adjustable pole mounting bracket.
Base Dimensions Available in three base sizes across three capacities
Base Construction Powder coated mild steel fabricated top and bottom base frames with a 304 stainless steel removable weight platter and
a R60 approved C3 aluminium IP66 load cell.
Built-in Indicator Column Supplied with 650 mm high stainless steel pole for easily mounting the ZM110 Indicator to the base
Overload Protection 150% overload protection
Feet Fitted with four large, anti-slip, adjustable, black feet, all with locking nuts

USER INTERFACE
Operational Keys Eight operation keys (Unit, Select, Print, Zero, Tare x 2, On, Off ). Two functional tare keys to accommodate both left and
right hand dominant operators.
Status Annunciators Zero, Motion, Gross, Net, Memory +, Battery Charge
Display 50 mm x 165 mm large, easy-to-read LCD, backlit display with 40 mm high seven digit seven segment display

PHYSICAL
Operating Temperature -10° to 40° C Shipping Weight 60 kg: 13.0 kg
150 kg: 14.5 kg
Operating Humidity 10 to 90% relative humidity, non-condensing 300 kg small base: 14.5 kg
300 kg large base: 26.5 kg

APPROVALS INPUT/OUTPUT
Agencies OIML (European and UK) Class III 4,200 d Communications One RS232 port (optional)
TEC : 0200-NAWI-05920 OIML CoC for
ZM110: R76/2006-A-DK2-19.04
RoHs II compliant
CE

DIMENSIONS (mm)
Base Size a b c d e f g h i j k
400 mm x 400 mm 250 400 342 521 342 400 32 903 190 100 99
400 mm x 500 mm 250 500 442 621 342 400 32 903 190 100 99
500 mm x 600 mm 250 600 542 721 442 500 32 903 190 100 124

SALES, SERVICE AND INSTALLATION

PT MUGI
INNOVATIVE GLOBAL WEIGHING SOLUTIONS
Head Office : MEDAN 20114 : Jl. Glugur By Pass 83A, Phone (061) 6618290, 6623474, Fax (061) 6615061
MUGI GRIYA BUILDING 8th Floor PALEMBANG 30126 : Jl. Veteran 1043, Phone (0711) 358812, Fax (0711) 358812
Jl. MT Haryono Kav. 10 BANDAR LAMPUNG 35116 : Jl. Cut Nyak Dien 25B, Phone (0721) 263793, 263794, Fax (0721) 263794
Jakarta 12810 – INDONESIA JAKARTA 12760 : Jl. PLN Duren Tiga No. 99, Phone (021) 7988345, 7940584, Fax (021) 7982177
Phone : (62-21) 8308415 (hunting)
BANDUNG 40243 : Jl. H. Kurdi No. 88, Phone (022) 5207565, 5207520 Fax (022) 5206233
Fax : (62-21) 8308422
PO Box : 4027/JKT 12040 SEMARANG 50198 : Jl. Supriyadi No.12G, Phone (024) 6707627, 6723644, Fax (024) 6703272
Email : [email protected] SURABAYA 61253 : Jl. Raya Ir. H. Juanda Km3 No.80, Sidoarjo, Phone (031) 8688645, Fax (031) 8688653
Website : www.ptmugi.com MAKASSAR 90111 : Jl. Pasar Ikan No. 32, Phone (0411) 3610587, 3617646, Fax (0411) 3617646
Avery Weigh-Tronix is an ITW company

Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois Tool
Works”). Copyright © 2017 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be regarded
as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery Weigh-Tronix ZM110BenchScale_spec_501862.indd
reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. AWT35-501862