Terms in CAPS = Softkey label. Terms in [ ] = option to be selected.

Map, Flight Plans & Waypoints

Flight Functions (from PFD screen) Zoom Map: Press Left Knob > Turn knob

Change Altimeter Setting: Turn Right Knob to adjust. Press knob to set. Change Map Format/Layout: Press MAP softkey repeatedly.

Heading Bug: Turn Left Knob to adjust. View Radar, Terrain, Winds: SHOW [choose]

Altitude Bug: Press Right Knob > Turn knob to adjust > Press to set. View Winds Aloft: NEXT* > WINDS > UP/DOWN chngs alt.- XM only
(NOTE: If A/P is active, you will then select climb or descent rate.)
Show Fixes & Intersections: NEXT* > FIX [choose]

View Off-Screen Waypoints: NEXT* > SLEW

Dim Screen: Press Left Knob > Turn knob to adjust > Press to set. Direct-To: (From MAP) > FLIGHT PLAN > > use letter keys to enter
waypoint ID (Press Right Knob to move cursor) > EXIT to activate
Show PFD, MAP or Engine: Press PFD, MAP or ENG softkey
Direct-To from MAP: Press Right Knob > Turn knob to select waypoint>
Show HSI/Change PFD Screen View: Press PFD softkey repeatedly.
> Press Right Knob > Turn Right Knob to USE MAP > Press knob to enter
PFD Terrain Warning Colors: NEXT* > SV [TERRAIN]
Multi-Leg Flight Plan: (From MAP) > NEXT* > FLIGHT PLAN > SEQ MODE
(Training) Turn Off Synthetic Vision PFD features: NEXT* > SV [OFF] > ADD > Use letter keys to enter waypoints. Press Right Knob [NEXT] to
move cursor. Turn/Press Right Knob [ENTER]. Repeat until all waypoints are
(Training) Disable PFD View Options: NEXT* > PFD LOCK [ON] entered. EXIT to activate flight plan.

Activate Leg: Turn Right Knob to highlight last waypoint of leg. Press SET
Engine/Systems Display Features LEG to activate leg.

Reset Fuel Quantity: From ENG page > Press Left Knob > Turn to select Go Direct to a waypoint in a flight plan: Highlight waypoint. Press GO
preset quantity -OR- Highlight ADJ > Press knob> Turn knob to enter DIRECT. EFIS skips waypoints in between, then resumes flight plan.
custom quantity.
View Details of waypoint on Flight Plan Screen: Turn Right Knob to
Display Leaning Functions: From ENG page > LEAN [LEAN] highlight waypoint in list. Press RIGHT KNOB twice.

Change Data Display on ENG Page: From ENG page > NEXT > DATA View Details of anything on MAP Screen: Press Right Knob. Rotate knob to
[choose data to show on screen] highlight item on map. Press WPT DETAILS softkey. Note data box
on MAP screen for highlighted waypoints.
Set Time Frame for EGT/CHT Line Graphs: (From ENG) > Press Right
Knob [TIME] > Turn knob to set number of seconds
 VOR Navigation Basic Autopilot Controls
Heading Mode: Set heading bug. (From PFD) > Press Right Knob > LAT
Select NAV Source: (From PFD) > NAV MODE [GPS or NAV] (Choose GPS A/P [HDG]
or NAV (VHF radios) wired into the EFIS.)
Track GPS: Set up in HDG mode. Enter & activate flight plan or direct-to.
Display VOR radial or Localizer on HSI or CDI: Enter frequency into (From PFD) > Press Right Knob > LAT A/P [ENAV].
connected VHF nav radio. Press PFD > NAV MODE [NAV] to display on CDI.
Press PFD repeatedly to bring up split-screen HSI view. Track VOR/LOC: Set up in HDG mode. Enter frequency into connected VHF
radio. Tune OBS Course. (From PFD) > NAV MODE [ENAV]. (From PFD) >
Tune VOR OBS Course on HSI (PFD split screen): Turn Right Knob. Press Right Knob > LAT A/P [ENAV]

Tune VOR OBS Course on CDI (PFD full screen): (From MAP) > Turn Right Change altitude (optional Vertical Commands software): (From PFD) >
Knob. OBS setting is shown above knob. Press Right Knob > Turn knob to set Altitude Bug. Press RIGHT KNOB then
SET CLIMB IAS/SET DESCENT RATE to climb or descend at the preset rate
Approach Tasks -OR- turn RIGHT KNOB to set custom speed/rate. Push RIGHT KNOB to
activate climb/descent.
Load Synthetic Approach (HITS Boxes): Airport must be the active GPS External A/P (ie. TruTrak): Set TruTrak mode to GPSS or GPSV. TruTrak will
waypoint. (From PFD) > NEXT* > SAP [ARM] > EXIT. Turn & press Left Knob then follow commands from the above EFIS A/P controls.
to select runway. Press EXECUTE when ready to intercept course.
Miscellaneous Features
Set Approach Altitudes: (From PFD) > NEXT * > SET DA -or- SET MISSED
ALT -or- SET PRESET ALT. Turn Right Knob to set altitude > Press Knob to
enter. WARNING: DA is advisory only. A/P does not level off at DA. Repeat Show Flight Director: Press Right Knob twice > FLT DIR [ON]
to SET MISSED ALT (missed approach holding altitude).
Access Setup Menu: NEXT* > SET MENU
Missed Approach (autopilot): Press MISSED softkey to climb at runway
heading ground track to preset MISSED (holding) altitude. Record a Demo File to USB Stick (manual data logging): NEXT* > DEMO
(configure settings in Set Menu > General Setup > DEMO Settings)
Execute Approach (autopilot): Press yellow EXECUTE softkey when cleared
for approach to enable autopilot capture of approach course. (Training) Configure Softkey Timeout: Setup Menu > General Setup >
Initial Menu Timeout and Used Menu Timeout
Engage: Turn on external switch servo power and ENGAGE/ DISENGAGE
switch. A/P should hold present pitch and bank. Press red S&L HOLD ALT &
HDG for emergency straight & level flight. Press red 180° ALT HLD for an
emergency 180° level turn to escape IMC.
Sport
Quick-Reference
www.grtavionics.com • (616) 245-7700 Pilot Card Rev. A