DATA SHEET

CHECKFIRE 210
Detection and
Actuation System

Features
n Supervised power, detection, release, and communication
circuits
n Display module with LED system status indicators

n Adjustable mounting bracket (display module)

n 85 dB internal sounder

n Compact size

n Automatic and/or manual actuation

n Electric DELAY/Reset/Silence button

n PUSH To Activate / Alarm When Lit electric

manual activation button
n Interface control module for all color-coded Plug and Play
cable connections
n Cables provide quick installation and easy replacement

n Internal power source with optional external power 009266

n Auxiliary power output when external power is connected

n Manual programming at interface control module Application

n Computer programming available through mini USB port The CHECKFIRE 210 Detection and Actuation System is
n Two programmable release time delays typically used with an ANSUL® A-101 or LVS Vehicle Fire
Suppression System for 24-hour protection of equipment. The
n Two analog detection circuits system is designed for vehicles and equipment in extreme
n Detection circuits are programmable for multiple detection environmental and physical conditions.
methods
Industries where vehicles use CHECKFIRE 210 Systems:
n Detection circuit #2 may be programmed for pressure
n Forestry n Land fills
switch feedback
n Agriculture n Waste disposal
n Two internal programmable SPDT Form C relays
n Construction n Mining
(5 A @ 30 VDC nominal automotive)
n Public transportation
n Downloadable 4000+ event history log with real-time stamp
n Public utilities
n System isolate feature

n Dust and water tight (IP67 rated)

Description
n Designed for harsh environments
The CHECKFIRE 210 Automatic Detection and Actuation
System provides supervised input/output circuits to activate
an ANSUL fire suppression system. Upon detecting a fire
condition, the interface control module activates the release
circuit, resulting in the discharge of an expellant gas cartridge,
initiating fire suppression system operation.
Green, amber, and/or red pulsing LEDs, and the internal
sounder notify operator of system status. The sounder only
activates for faults, isolate mode, and system release.
Operating components include the display module, interface
control module, spot thermal detectors, linear detectors, elec-
tric manual actuators, protracting actuation devices (PAD),
electric-pneumatic actuators, and cables for power, detec-
tion, and release circuits. The entire system is electronics
based for supervision, communication, and control of system
components.

One Stanton Street | Marinette, WI 54143-2542, USA | +1-715-735-7411 | www.ansul.com

© 2018 Johnson Controls. All rights reserved. All specifications and other information shown were
current as of document revision date and are subject to change without notice. | Form No. F-2014011-01_A4
CHECKFIRE 210 System – Sample Connections
Linear
Detector

Branch terminator
(On end of detector)

Checkfire 210
Spot thermal Electric manual DISPLAY module
detectors (Install actuator and bracket
with heat shield and bracket
and bracket)

Detection
circuit
cable
EOL and tees
DEVICE

Display
Visual Cable
Seal
Interface
control
module

Power circuit Fused power

cable circuit cable

Release circuit
drop cable
Electric- Relay Circuit
Release circuit
pneumatic Cable
cable and tees
actuator
Relay
Cable-LEADS

Expellant
gas
cartridge

AGENT
TANK
009269
Typical System Connections Display Module
The CHECKFIRE 210 Display Module communicates with the The CHECKFIRE 210 Display Module communicates with the
CHECKFIRE 210 Interface Control Module (ICM) through the Interface Control Module (ICM) to indicate system status.
display cable using threaded circular connectors. Color-coded Installation within reach of the operator provides easy access
receptacles in the ICM are the central connection point for all to operator controls.
system cables.
Guard
System Cabling: Enables communication and control of Door
components.
n IP67 connectors

n Color-coded, anti-vibration connections RELEASE ANSUL ® POWER

CHECKFIRE 210
n Integral connectors on each end of cable CONTROL SYSTEM
DISCHARGE
DETECTION
n Multiple lengths for versatility
DELAY PUSH
RELEASE TO ACTIVATE
n Temperature rating: 302 °F (150 °C) ISOLATE

Detection Circuits #1 and #2: Permits multiple-detection

SHUTDOWN
options using detection circuit cable and tees for the main
detection trunk and branch lines.
n Electric manual actuators 009270

n Linear detectors
Delay/Reset/ Push to activate/
n Spot thermal detectors Silence button alarm when lit
button and LED
n Pressure switch (detection circuit #2 only)

Release Circuit: Connects to a maximum of 10 electric- n Dust and water tight (IP67 rated)
pneumatic actuators installed on agent tank expellant gas
cartridges using release circuit cable(s), tee(s), and release n Durable high-strength glass-filled nylon material
circuit drop cable(s). n Surface or bracket mounted
External Power Circuit: Provides a direct connection to the n Two index pins on back for secure mounting
vehicle power source using power circuit cable(s) and a single n Ambient temperature range: -40 °F to 185 °F
fused power circuit cable, when external power is required. (-40 °C to 85 °C)
Auxiliary Output Circuit: Connects to external notification n LED indicators provide notification of system status
devices. (­internal sounder matches LED pulse rate)
Display Circuit: Connects display module with ICM. n PUSH To Activate / Alarm When Lit manual-activation
button and LED
Relay Circuit: Provides connection for two independent inter-
nal relay contacts for connection by others. – Provides manual actuation (immediate release)
– Indicates alarm condition
n Guard door with visual seal to protect manual-activation
Detection button
A Linear Detector with an activation temperature rating of n DELAY/Reset/Silence Button
356 °F (180 °C) provides fire detection in the protected area.
–R
 estarts Time Delay #1 (TD1) before TD1 sequence
Two twisted spring steel conductors separated by a heat-
expires
sensitive insulator are limited to a minimum bend radius of 2
1/2 in. (64 mm). For easy installation, red color-coded connec- – Resets system (during non-alarm status)
tors match the red connectors of the entire detection circuit. –S
 ilences internal sounder during fault conditions and
isolate mode
Spot Thermal Detectors have the temperature rating stamped
on the detector and are color-coded blue for 250 °F (121
°C) and red for 350 °F (177 °C) operating temperatures. The
included retaining nut securely holds the detector in the
required bracket and heat shield.
Interface Control Module (ICM)
The CHECKFIRE 210 Interface Control Module (ICM) is the
central connection point for input/output circuits. Through
communication with the display module, operators receive
continuous system status updates, and operator input
commands go directly to the ICM. Color-coded receptacles
match with color-coded cable connectors providing quick
visual confirmation of proper circuit connections.

Battery
compartment

Isolate
009267
switch

Battery Module
A supervised 3.6 VDC lithium CHECKFIRE 210 Battery
Module provides internal power for the CHECKFIRE 210
System. A connector pigtail extending from the top of the
Color-coded battery connects to the ICM battery cable.
receptaCles
(7 places) 009271

Electric-Pneumatic Actuator
With a focus on ease of installation and safety, the Electric-
The protective battery compartment cover is held in place Pneumatic Actuator reduces system complexity. The
with 4 captive screws. Besides the internal power supply, Protracting Actuation Device (PAD) directly actuates the
the battery compartment includes the battery cable, a electric-pneumatic actuator pin eliminating the need for
mini USB connection port, and the programming inter- pneumatic actuation.
face (button and LEDs). The system programming may be
accomplished with the manual programming button and The re-designed PAD with plug-in spade connectors is
indicator LEDs or by using a computer with the ANSUL easy to install and replace without tools. After plugging the
CHECKFIRE 210 Programmer software communicating PAD into the release circuit drop cable, the cable is hand-
through the mini USB port. tighted to the top of the electric-pneumatic actuator.

An isolate switch on the side of the ICM provides ease of

access to temporarily disable the automatic system release
function. While disabled, manual system release is still
available. An amber isolate LED on the display module
continues to pulse until the switch is returned to normal.
n Dust and water tight (IP67 rated)

n Durable high-strength glass-filled nylon

n UL94 Flame rating

n Ambient temperature range: -40 °F to 185 °F 009261

(-40 °C to 85 °C)
For installer safety during assembly of the Electric-
n Internal battery compartment with IP67 cover
Pneumatic Actuator to an expellant gas cartridge, the
n System isolate switch actuator includes a new preventor. The integral preventor
n Steel mounting plate reduces the possibility of attaching the actuator with the
pin not completely retracted. It also provides a metal to
metal seat with the expellant gas cartridge eliminating the
spacing washer.
If required, optional pneumatic actuation is available.
Electric Manual Actuator System Specifications
The newly designed Electric Manual Actuator (EMA) Interface Control
provides electrical activation of the fire suppression Module Power: Internal power source
system. Pulling the pin and striking the red button sends a and/or: 12/24 VDC nominal external
signal to the interface control module for immediate actua- power (24 hour operation)
tion of the electric-pneumatic actuator. Upon actuation, the Operating
expellant gas cartridge initiates fire suppression system Temperature Range: -40 °F to 185 °F
operation. (-40 °C to 85 °C)
Shock: In accordance with UL1254
Vibration: In accordance with UL1254
Moisture and Dust: IP67 per IEC 60529
Electromagnetic
Compatibility: Heavy Industrial EMC Directive
Compliant (2004/108/EC)

Approvals
FM Approved and CE Marked

Note: The converted values in this document are provided for

dimensional reference only and do not reflect an actual measurement.
ANSUL, CHECKFIRE, and the product names listed in this material
are marks and/or registered marks. Unauthorized use is strictly
009262 prohibited.

EMAs are typically accessible from ground level and/or in

a path of egress. An index nub ensures the EMA remains
at the proper angle for access to the pull pin.

009268
Ordering Information
Part No. Description
Part No. Description
Display Cables
System Components
439452 Cable, Display, 2 ft (0.61 m)
439560 Display Module, CHECKFIRE 210
439454 Cable, Display, 5 ft (1.53 m)
439564 Mounting Bracket, CHECKFIRE 110/210
439456 Cable, Display, 10 ft (3.05 m)
439561 Interface Control Module, CHECKFIRE 210
439458 Cable, Display, 20 ft (6.10 m)
439569 Electric-Pneumatic Actuator
(normally supplied with agent tanks) 439460 Cable, Display, 30 ft (9.15 m)
439400 Electric Manual Actuator (EMA) 439462 Cable, Display, 50 ft (15.24 m)
440537 Electric Manual Actuator Bracket 439449 Connector, Bulkhead, Display Cable

Detection Circuit Cables and Fittings Relay #1 & #2 Circuit Cable

439384 Cable, Detection Circuit, 2 ft (0.61 m) 439466 Cable, Relay Cable-Leads, 3 ft (0.91 m)
439386 Cable, Detection Circuit, 5 ft (1.53 m) 440410 Cable, Backup Power/Relay Circuit, 2 ft (0.61 m)
439388 Cable, Detection Circuit, 10 ft (3.05 m) 440413 Cable, Backup Power/Relay Circuit, 5 ft (1.53 m)
439390 Cable, Detection Circuit, 20 ft (6.10 m) 439482 Cable, Backup Power/Relay Circuit, 10 ft (3.05 m)
440759 Cable, Detection Circuit, 30 ft (9.15 m) 440416 Cable, Backup Power/Relay Circuit, 20 ft (6.10 m)
440762 Cable, Detection Circuit, 50 ft (15.24 m)
Auxiliary Output Circuit Cable
439394 Connector, Tee, Detection Circuit (MxFxF)
439450 Cable, Auxiliary Power Output Circuit, 3 ft
439396 Connector, EOL Device, Detection Circuit (0.91 m)
439398 Connector, Branch Terminator, Detection Circuit
439404 Connector, Bulkhead, Detection Circuit Power Circuit Cables and Fittings
439438 Cable, Power Circuit, 2 ft (0.61 m)
Linear Detectors 439440 Cable, Power Circuit, 5 ft (1.53 m)
439406 Linear Detector, 2 ft (0.61 m) 439442 Cable, Power Circuit, 10 ft (3.05 m)
439478 Linear Detector, 5 ft (1.53 m) 439444 Cable, Power Circuit, 20 ft (6.10 m)
439480 Linear Detector, 10 ft (3.05 m) 439446 Cable, Power Circuit, 30 ft (9.15 m)
439408 Linear Detector, 20 ft (6.10 m) 440187 Cable, Power Circuit, 50 ft (15.24 m)
439410 Linear Detector, 30 ft (9.15 m) 439405 Connector, Bulkhead, Release and Power Circuits
440765 Linear Detector, 50 ft (15.24 m) 439492 Cable, Fused Power Circuit, (w/Inline Fuse
Holder), 3 ft (0.91 m)
Release Circuit Cables and Fittings
439418 Cable, Release Circuit, 2 ft (0.61 m) Accessory Equipment
439420 Cable, Release Circuit, 5 ft (1.53 m) 440352 ICM Battery Module, CHECKFIRE 210
439422 Cable, Release Circuit, 10 ft (3.05 m) 438280 Spot Thermal Detector, 250 °F (121 °C)
439424 Cable, Release Circuit, 20 ft (6.10 m) 438281 Spot Thermal Detector, 350 °F (177 °C)
439426 Cable, Release Circuit, 30 ft (9.15 m) 440905 Spot Thermal Detector Bracket and Heat Shield
439428 Cable, Release Circuit, 50 ft (15.24 m)
439430 Cable, Release Circuit Drop, 30 in. (0.77 m) 440389 Pressure Switch
439432 Cable, Release Circuit Drop, 38 in. (0.97 m)
440737 Double-Loop Cable Ties (Pkg. of 50)
439434 Connector, Tee, Release Circuit (MxFxF)
56692 Rubber Sleeve (Pkg. of 20)
439436 Connector, Release Circuit Terminator
439405 Connector, Bulkhead, Release and Power Circuits 440798 Label Package
439448 Protracting Actuation Device (PAD),
w/Spade Connectors 440097 Detection Circuit Tester (DCT)
441021 Release Circuit Tester (RCT)
440912 Release Circuit Test Plug (Pkg. of 3)