Scribd
Upload
72 views1 page

Va1048 2

This document provides a schematic and specifications for a hydraulic manifold. It has 6 service ports and 8 auxiliary ports, with working pressures up to 345 bar. It is 39 kg and can supply 15 LPM of flow. It is classified for use in hazardous areas with flammable gases. Dimensions and material connections are provided.

Uploaded by

陆军
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views1 page

Va1048 2

This document provides a schematic and specifications for a hydraulic manifold. It has 6 service ports and 8 auxiliary ports, with working pressures up to 345 bar. It is 39 kg and can supply 15 LPM of flow. It is classified for use in hazardous areas with flammable gases. Dimensions and material connections are provided.

Uploaded by

陆军
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1 2 3 4 5 6 7 8 9 10

DO NOT SCALE THIRD ANGLE PROJECTION DIMENSIONS IN MILLIMETRES

CONNECTIONS
A A
P1 / P2 - PRESSURE - 1/2 NPT
M20 x 1,25P
T1 / T2 - RETURN - 1/2 NPT
S1-S6 - SERVICE - 3/8 NPT
CONDUIT ENTRY SCHEMATIC
TA-TF - AUXILIARY RETURN - 3/8 NPT
S1A - S6A - AUXILIARY SERVICE - 1/8 NPT 55 80 (TYP)
S1A S1 S2A S2 S3A S3 S4A S4 S5A S5 S6A S6

WORKING PRESSURES

P1 - 345 BAR MAX


P2 - 345 BAR MAX
B RELIEF VALVE SET POINT B

172
175 BAR A

122
WEIGHT

37,5
S1 S2 S3 S4 S5 S6
39 KG APPROX TA TB TC TD TE TF

20,4
13
FLOW RATE
A T1 T2
15 LPM P1 P2

C HAZARDOUS AREA CLASSIFICATION 0 41 69 121 149 201 229 281 309 361 389 441 469 510 TA TB TC TD TE TF C

ZONE 1, GAS GROUP IIA T3

M6 x 1,P FIXING
HOLES - 4 PLACES

M10 HOLE 8 3
FOR LIFTING
'EYE' - BOTH ENDS

D EARTH D
TERMINAL

234
T1 T2

76,2
65

51,3
P1 S1A S2A S3A S4A S5A S6A P2

16
5,6

16 SECTION A-A

53
23
E 9 4 2 1 E
6 0 30 121 201 281 361 455
7 41 441 ITEM PART No DESCRIPTION MATERIAL QTY
1 M1070/02 MANIFOLD BS970: PT3: 316S11 1
2 FP15/203/SX/M/32/X 3/2, NC, MAINSTAGE VALVE BIFOLD FLUIDPOWER 6
WIRING DIAGRAMS - TYPE 77X
WINDING
3 CC4106/10/X CARTRIDGE CHECK VALVE BIFOLD FLUIDPOWER 6
4 TRV3005/MD/X-XXX THERMAL RELIEF VALVE BIFOLD FLUIDPOWER 6
SOLENOID
CASE
WINDING
6 60-1-8-40-A4 S.H.C.S. M8 x 40 LG A4 ST. STL 24
F F
7 70-1-8-A4 M8 SPRING WASHER A4 ST. STL 24
SOLENOID
DC VOLTAGE CASE
Voltage can be applied 8 CC4106/255/10/X CARTRIDGE CHECK VALVE BIFOLD FLUIDPOWER 6
in either direction
AC VOLTAGE
9 FP01/SX/M/32/NC/X-7X 3/2, NC, SOLENOID VALVE BIFOLD FLUIDPOWER 6

NOTES : VALVE TYPES/USED ON Bifold Fluidpower Limited


Greenside way,Middleton, Manchester, M24 ISW
1.) O-RING MATERIAL CODE `X` S = NITRILE VA1048/S Telephone (44) 0161 345 4777 Fax (44) 0161 345 4780

V = VITON PROJECT TITLE PROJECT No.


VA1048/V 6 STATION CONTROL ASSEMBLY
G 2 08.03.12 MM AUXILIARY SERVICE PORTS ADDED: 2.) ALL DIMENSIONS NOMINAL UNLESS OTHERWISE STATED. VA1048/SA DRAWING No. REV.
G
DRAWING TITLE
1 06.03.12 MM MM 'S' PORTS RE-POSITIONED: FIXING HOLES RE-LOCATED AND RE-SIZED: ADDITIONAL 'T' PORTS ADDED GENERAL ARRANGEMENT / INSTALLATION VA1048 2
0 06.03.12 MM MM FOR APPROVAL DRAWN
M MELLOR DATE CHECKED
06.03.12
DATE APPROVED DATE

REV DATE DRAWN CHKD REVISION Copyright C 2000 BIFOLD FLUIDPOWER LTD. All Rights Reserved C.A.D. Produced Drawing DO NOT Change By Hand
1 2 3 4 5 6 7 8 9 10

You might also like