1. This document provides a schematic and dimensions for a manifold and 3/2 balanced poppet valve.
2. Key specifications include a maximum working pressure of 120-250 bar for the pilot and 345 bar for the service ports, and a weight of approximately 8 kg.
3. Connections include 1/8" NPT for the pilot ports and 3/4" NPT for the pressure, service, and tank ports.
1. This document provides a schematic and dimensions for a manifold and 3/2 balanced poppet valve.
2. Key specifications include a maximum working pressure of 120-250 bar for the pilot and 345 bar for the service ports, and a weight of approximately 8 kg.
3. Connections include 1/8" NPT for the pilot ports and 3/4" NPT for the pressure, service, and tank ports.
1. This document provides a schematic and dimensions for a manifold and 3/2 balanced poppet valve.
2. Key specifications include a maximum working pressure of 120-250 bar for the pilot and 345 bar for the service ports, and a weight of approximately 8 kg.
3. Connections include 1/8" NPT for the pilot ports and 3/4" NPT for the pressure, service, and tank ports.
1. This document provides a schematic and dimensions for a manifold and 3/2 balanced poppet valve.
2. Key specifications include a maximum working pressure of 120-250 bar for the pilot and 345 bar for the service ports, and a weight of approximately 8 kg.
3. Connections include 1/8" NPT for the pilot ports and 3/4" NPT for the pressure, service, and tank ports.
DO NOT SCALE THIRD ANGLE PROJECTION DIMENSIONS IN MILLIMETRES
A 2 3 A 5 SCHEMATIC 2 4 PL1 PL2
P B B T 1
S1 S2
197 PILOT BREATHER 55 75 22
C C
CONNECTIONS 87,8
87,8 62,4
62,4 P T 37
P = PRESSURE - 3/4" NPT
17 S1 & S2 = SERVICE - 3/4" NPT SPRING CHAMBER T - TANK = 3/4" NPT
16,5 D 59,9 76,2 50,9 BREATHER D 59,6 PL1 & PL2 = PILOT - 1/8" NPT 175 145 15 MAX WORKING PRESSURE FIXING SCREW TORQUE SETTINGS PILOT - 120 TO 250 BAR BAR (1740 TO 3625 PSI) M6 7.3 Nm SERVICE - 345 BAR (5000 PSI) E E M8 17.7 Nm 38,1
WEIGHT 76,2
S2 S1 8 Kg APPROX. Item Number Part Number Title Material Quantity 1 M1022/02 MANIFOLD S/STEEL BS970/1/3 316S11 1 MOUNTING POSITIONS F M8 x 15 DP 2 FPS50-H2-M-32-X 3/2, BALANCED POPPET VALVE. 2 F 2 PLACES PL2 PL1 1 3 CC(A)S4118/05/X-H2S CARTRIDGE CHECK 1 55 75 4 1488/02 ADAPTOR S/STEEL BS970/1/3 316S11 1 5 BS0186-24 ORING 1
NOTES : VALVE TYPES/USED ON Bifold Fluidpower Limited
Greenside way,Middleton, Manchester, M24 ISW Telephone (44) 0161 345 4777 Fax (44) 0161 345 4780 1.) O-RING MATERIAL CODE `X` S = NBR PROJECT TITLE PROJECT No. N = K09G GRADE 2 STATION FPS50 G DRAWING No. G DRAWING TITLE REV. 1 28.03.13 KRG ITEM 3 WAS CC4118/05/X-H2S GENERAL ARRANGEMENT VA1005 1 0 18.07.11 KRG ISSUED FOR PRODUCTION DRAWN kevin.green DATE CHECKED 18.07.11 DATE APPROVED DATE
REV DATE DRAWN CHKD REVISION 2.) ALL DIMENSIONS NOMINAL UNLESS OTHERWISE STATED. Copyright C 2011 BIFOLD FLUIDPOWER LTD. All Rights Reserved C.A.D. Produced Drawing DO NOT Change By Hand 1 2 3 4 5 6 7 8 9 10
