Scribd
Upload
30 views2 pages

Emf 2015

This document contains an exam on electromagnetic waves and guide structures. It has two parts: Part I contains 5 short answer questions; Part II contains 4 longer answer questions requiring calculations. The questions cover topics like transverse magnetic modes in waveguides, characteristic impedance of transmission lines, cutoff frequencies, and reflection coefficients. The exam is for a course on electromagnetic waves and guide structures that is part of a Bachelor's degree program in electrical and computer engineering.

Uploaded by

nandakumari.ae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views2 pages

Emf 2015

This document contains an exam on electromagnetic waves and guide structures. It has two parts: Part I contains 5 short answer questions; Part II contains 4 longer answer questions requiring calculations. The questions cover topics like transverse magnetic modes in waveguides, characteristic impedance of transmission lines, cutoff frequencies, and reflection coefficients. The exam is for a course on electromagnetic waves and guide structures that is part of a Bachelor's degree program in electrical and computer engineering.

Uploaded by

nandakumari.ae
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ELECTROMAGNETIC WAVES AND GUIDE STRUCTURE (ECEG-4306)

BSc in electrical & Computer engineering IV BSc I Semester

Time: 3.00 Hrs. Max Points: 50


Name of the student: ID No:
Part I: Answer ALL questions

1. What is impossibility of TEM wave in rectangular waveguide? (3pts).


2. Derive the Expression for Characteristic impedance of transmission line. (3pts).
3. Calculate the value of α, β and ϒ from K for evanescent and propagation modes. (3pts).
4. A quarter wave transformer matches a 100 ohms load to a transmission line with L=1.35μH/m
and C=60pF/m .calculate the characteristic impedance of matching transformer. (3pts).
5. What are the applications of wave guides? (2Pts).

Part II: Answer any FOUR questions 9*4=36

1. a) Derive any 3 field expressions for TRANSVERSE MAGNETIC (TM) Modes. (6 Pts.).

b) Determine the phase and group velocities for a rectangular guide of 2.5 cm. x 1.0 cm. cross-
section, for the TE20 mode at 15 GHz. (3pts).

2. a) Define lossless and distortion less line, obtain α, β for distortion less line. (4 Pts.).

b) A rectangular wave guide is designed to propagate the dominant mode TE10 at a frequency of
5MHz.the cutoff frequency is 0.8 of signal frequency .the ratio of the guide height to the width is
2.calculate the dimensions of guide. (5pts).

3. a) An air-filled rectangular waveguide is to be constructed for single-mode operation at 15 GHz.


Specify the guide dimensions, a and b, such that the design frequency is 10% higher than the
cutoff frequency for the TE10 mode, while being 10% lower than the cutoff frequency for the
next higher-order mode.(6 Pts).

b) Explain the applications of transmission lines. (3Pts).

4. a) A lossless transmission line having Zo = 120 Ω is operating at w = 5x 108 rad/s. If the velocity
on the line is 2.4 x 108 m/s, find: (a) L; (b) C. (c) Let ZL. be represented by an inductance of 0.6
µH in series with a 100-Ω resistance. Find Γ and S.(6 Pts.).

b) An air-filled cubical cavity operates at a resonant frequency of 2 GHz when excited at the
TE1O1 mode. Determine the dimensions of the cavity. (3Pts).

5. a) In a rectangular waveguide for which a = 1.5 cm, b = 0.8 cm, σ = 0, µ= µ0, and ɛ = 4ɛo,
Determine (a) The mode of operation (b) The cutoff frequency (c) The phase constant β (d) The
propagation constant ϒ (e) The intrinsic wave impedance η. (5Pts).

b) A30-m-long lossless transmission line with Z0 = 50Ω operating at 2 MHz is terminated with a
load ZL = 60 + j40 Ω0. If u = 0.6c on the line, find (a) The reflection coefficient Γ and Standing
wave ratio S (b) The input impedance. (4 Pts)

You might also like