Altic

UGAM TECHNOLOGY
AN ISO 9001:2015 COMPANY

ALTIC007
FIRE STOP COATING FOR ELECTRICAL CABLES
TECHNICAL SPECIFICATIONS
PRECAUTION IS BETTER THAN CURE BUT THERE IS NO CURE IN CASE OF

FIRE SO DON’T TAKE CHANCE USE ALTIC 007
ALTIC 007
INTUMESCENT FIRE RETARDANT PAINT
CERTIFICATION
ALTIC 00 7FIRE RETARDANT PAINT is Tested and Certified for Circuit Integrity for 4 hours
from NATIONAL TEST HOUSE MUMBAI.
UGAM TECHNOLOGY
406-407OrchidPlazaBh/McDonald’sMainSamaSavaliRoadVadodra-390008
[email protected]
Ph.No-+91-8410010286/9925810802
UGAM TECHNOLOGY
Characteristic Specification
PRODUCT ALTIC 007 FR INTUMESCENT CBLE
COATING
HSNCODE 32099020
TYPE Water base ,Intumescent, fire retardant, flexible

and thin coating for cables and cable trays
COLOR Off white/special shades can be manufactured
FINISH Mat
CURING Surface dry 60 min

Track free dry 8 hrs
Hard dry 48 hrs
DRYING Air-drying paint
APPLICATION Brush or air less spray
NON-VOLATILE MATTER Min 70%
SCRATCH HARDNESS No such scratch as to show the bare surface
FLEXIBILITY AND ADHESION No visible damage or detachment of the film

AFTER 48 HOURS AIR DRYING
WATER/ACID/ALKALI/OIL No effect in mild application
SHELF LIFE One year
WATER IMMERSION No effect after immersion for 360 hours
RADIATION No effect
EFFECT ON CABLE JACKETING No effect

MATERIAL
SOLVENT Water
VOC Less than 100 gm/Kg
COVERAGE
REQUIRED FIRE RATING COVERING (SQUARE FOOT/KG) DFT (microns)
30 minutes 24-25 500
1 hour 10-12 1000
2 hours 5-6 2000
3 hours 4 3000
4 hours 2.5-3 4000
UGAM TECHNOLOGY
[email protected]
Ph.No-+91-8410010286/9925810802
UGAM TECHNOLOGY
DESCRIPTION
Expands up to10times the original size when exposed to heat/fire prevents the cable to be
exposed to heat/fire. Can be used as – cable Penetration product, cable coating, cable trays
coating, wood or flammable and flexible product’s coating. Being halogen free and toxic
gasses emission free, ALTIC007 is the most suitable product available in the market.
1. ALTIC007passes the Test Safe`s following tests.
2. Flammability testing of materials and substances, combustion.
3. Product analysis with heat, toxicity and smoke yield.
4. Explosive testing of materials, including flammable gasses, dusts, and vapours.
5. It also passes bench scale flammability test.
ALTIC-007passes the NFPA 703 test for fire retardant Impregnated wood and fire-
retardant coatings for building materials.
ALTIC007passes following tests as per ASTM. –very much within the range of
NFPA approval.
>Flame spread test as per ASTME-162:01
>Smoke generation test as perASTME-662:06.
>Surface burning test as per ASTM E-84.
>Cabinet method fire retardancy test as per ASTM D-1360.
UGAM TECHNOLOGY
[email protected]
Ph.No-+91-8410010286/9925810802
UGAM TECHNOLOGY
ADVANTAGES
1) Thin film coating approximately 500 microns provides reliable fire protection without
causing premature ageing or over heating of cables.
2) Halogen and asbestos free coating.
3) Rating of electrical cables is not reduced.
4) Escape routes and power supply can be used for longer time.
5) Flame spread and insulation damages are delayed in case of prolonged exposure to fire.
6) Minimize smoke generation thereby permitting use in enclosed areas.
7) Burning drips and burning cable fragment drops are minimized to great extent.
8) Coated surfaces will not catch fire or ignite or spread fire.
9) Meets many stringent international fire standards.
10) Best coating with the highest fire protection amongst the coatings of this class.
11) Chemically converts nitrogen oxide and chlorine produced during burning of cables to foam
and charring material thereby reducing the possibility of toxic gasses emission.
12) Long lasting and can be used as outdoor/indoor/or even at places containing high moisture.
13) If coated with epoxy topcoat/varnish ,lifelong performance can be achieved.
14) Being flexible ,it is very much suitable for cables .Does not crack when cables are bent.
Continuous to and from movements also do not affect the performance of the coating.
15) Being water base, and non-toxic, it is eco-friendly.
16) Can be coated by brush/air less spray.
UGAM TECHNOLOGY
[email protected]
Ph.No-+91-8410010286/9925810802
UGAM TECHNOLOGY
APPLICATIONPROCEDURE
Areas should be cleaned, dried and made free from oil and dust . Surface temperature should be
greater than 20degrees C. Stir the can properly. Observe the viscosity for brushing / airless spraying.
Add soft water if required. Apply minimum two coats or as per requirement to achieve 500 microns
dry film thickness. If smooth and decorative finish is required apply UGAM EPOXY TOP COAT
(suitable for intumescent coating). No primers required for this system if to be applied over cables.
But if application is over metallic surfaces, ALTIC ZINC RICH PRIMER should be applied.
PACKINGANDSHELFLIFE
Packing: 20Kg buckets.
Shelf life: Min. one year

Storage: cool and dry place free from freezing
TESTANDAPPROVALS–ALTIC007
DETAILS OFTESTSPASSED
1. A L T I C 0 0 7 passes the Test Safe`s following tests.
A. Flam ability testing of materials and substances, combustion.
B. Product analysis is with heat, toxicity and smoke yield.
C Explosive testing of materials, including flammable gasses, dusts, and vapors.
D. It also passes bench scale flammability test.
UGAM TECHNOLOGY
[email protected]
Ph.No-+91-8410010286/9925810802
UGAM TECHNOLOGY
2. ALTIC007 passes the NFPA 703 test for fire retardant Impregnated wood and fire retardant
coatings for building materials.
3. ALTIC007passesfollowingtestsasperASTM.-verymuchwithintherangeofNFPAapproval.
>Flame spread test as per ASTME-162:01
>SmokegenerationtestasperASTME-662:06.
>Surface burning test as per ASTME-84.
>Cabinet method fire retardancy test as per ASTM D-1360.
PROJECTS COMPLETED
1. Mylan laboratories Ltd (PAN India Bases)
2. Scheinider Electricals
3. Pidilite Industries (PAN India Bases)
4. ONGC LTD
5. Ozone Spinter Ltd
6. HCL Technologies Ltd
7. Ravi Export Ltd
8. Indian Army –J&K
9. Jonson & Jonson ……
TESTINGVIDEOLINK:
ALTIC007-IN-TUMESCENTFRCOATINGFORCABLE
https://drive.google.com/open?id=1oX_3kR1Z3f2bu-dl5WEXGV9GZ1w3zazv
UGAM TECHNOLOGY
[email protected]
Ph.No-+91-8410010286/9925810802
UGAM TECHNOLOGY
Manufactured by:UGAM TECHNOLOGY VADODARA GUJARAT-390008

AN ISO CERTIFIED 9001:2015COMPANY.
The technical specification is correct to the best of our knowledge and under test conditions and
we do not accept any liability towards misuse and contents of it. Product must be tested for
specific use prior to use.
UGAM TECHNOLOGY
[email protected]
Ph.No-+91-8410010286/9925810802
UGAM TECHNOLOGY
UGAM TECHNOLOGY
[email protected]
Ph.No-+91-8410010286/9925810802

Altic

Uploaded by

Copyright:

Available Formats

Altic

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Altic

Uploaded by

Copyright:

Available Formats

UGAM TECHNOLOGY

AN ISO 9001:2015 COMPANY

PRECAUTION IS BETTER THAN CURE BUT THERE IS NO CURE IN CASE OF

TYPE Water base ,Intumescent, fire retardant, flexible

COLOR Off white/special shades can be manufactured

CURING Surface dry 60 min

DRYING Air-drying paint

APPLICATION Brush or air less spray

NON-VOLATILE MATTER Min 70%

SCRATCH HARDNESS No such scratch as to show the bare surface

FLEXIBILITY AND ADHESION No visible damage or detachment of the film

WATER/ACID/ALKALI/OIL No effect in mild application

SHELF LIFE One year

WATER IMMERSION No effect after immersion for 360 hours

EFFECT ON CABLE JACKETING No effect

VOC Less than 100 gm/Kg

1. ALTIC007passes the Test Safe`s following tests.

2. Flammability testing of materials and substances, combustion.

3. Product analysis with heat, toxicity and smoke yield.

4. Explosive testing of materials, including flammable gasses, dusts, and vapours.

5. It also passes bench scale flammability test.

retardant coatings for building materials.

>Flame spread test as per ASTME-162:01

>Smoke generation test as perASTME-662:06.

>Surface burning test as per ASTM E-84.

>Cabinet method fire retardancy test as per ASTM D-1360.

causing premature ageing or over heating of cables.

2) Halogen and asbestos free coating.

3) Rating of electrical cables is not reduced.

6) Minimize smoke generation thereby permitting use in enclosed areas.

8) Coated surfaces will not catch fire or ignite or spread fire.

9) Meets many stringent international fire standards.

13) If coated with epoxy topcoat/varnish ,lifelong performance can be achieved.

15) Being water base, and non-toxic, it is eco-friendly.

16) Can be coated by brush/air less spray.

Shelf life: Min. one year

1. A L T I C 0 0 7 passes the Test Safe`s following tests.

A. Flam ability testing of materials and substances, combustion.

B. Product analysis is with heat, toxicity and smoke yield.

C Explosive testing of materials, including flammable gasses, dusts, and vapors.

D. It also passes bench scale flammability test.

coatings for building materials.

>Flame spread test as per ASTME-162:01

>Surface burning test as per ASTME-84.

>Cabinet method fire retardancy test as per ASTM D-1360.

1. Mylan laboratories Ltd (PAN India Bases)

3. Pidilite Industries (PAN India Bases)

5. Ozone Spinter Ltd

6. HCL Technologies Ltd

7. Ravi Export Ltd

8. Indian Army –J&K

9. Jonson & Jonson ……

Manufactured by:UGAM TECHNOLOGY VADODARA GUJARAT-390008

You might also like