Scribd Logo
Upload

Welcome to Scribd!

  • 26 views

    C18 MP Tier 3 Full Specification From CAT Website

    Uploaded by

    kumarraghu
    This document provides product specifications for a Caterpillar C18 ACERT Tier 3 diesel engine. The engine has a power rating range of 469-1001 horsepower and specifications including bore, stroke, displacement and emissions compliance. Dimension details on length, height, width and dry weight are given. Standard and optional equipment are listed covering areas like cooling, exhaust, fuel, lube and control systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    C18 MP Tier 3 Full Specification From CAT Website

    Uploaded by

    kumarraghu
    26 views6 pages
    This document provides product specifications for a Caterpillar C18 ACERT Tier 3 diesel engine. The engine has a power rating range of 469-1001 horsepower and specifications including bore, stroke, displacement and emissions compliance. Dimension details on length, height, width and dry weight are given. Standard and optional equipment are listed covering areas like cooling, exhaust, fuel, lube and control systems.

    Original Title

    C18 MP Tier 3 full specification from CAT website

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides product specifications for a Caterpillar C18 ACERT Tier 3 diesel engine. The engine has a power rating range of 469-1001 horsepower and specifications including bore, stroke, displacement and emissions compliance. Dimension details on length, height, width and dry weight are given. Standard and optional equipment are listed covering areas like cooling, exhaust, fuel, lube and control systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    26 views6 pages

    C18 MP Tier 3 Full Specification From CAT Website

    Uploaded by

    kumarraghu
    This document provides product specifications for a Caterpillar C18 ACERT Tier 3 diesel engine. The engine has a power rating range of 469-1001 horsepower and specifications including bore, stroke, displacement and emissions compliance. Dimension details on length, height, width and dry weight are given. Standard and optional equipment are listed covering areas like cooling, exhaust, fuel, lube and control systems.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    PRODUCT SPECIFICATIONS FOR C18 ACERT TIER 3

    POWER RATING

    Power Range 469-1001 bhp (350-747 bkW)

    ENGINE SPECIFICATIONS

    Speed Range 1800-2300 rpm


    Emissions EPA Tier 3 Commercial, IMO II, EU IW
    Aspiration TA, TTA
    Bore 5.7 in
    Stroke 7.2 in
    Displacement 1106 in³
    Rotation from Flywheel End Counterclockwise
    Configuration In-line 6, 4-Stroke-Cycle Diesel

    DIMENSIONS & WEIGHTS

    Minimum Dry Weight 4000 lb


    Minimum Length 73 in
    Maximum Length 76 in
    Minimum Height 47.2 in
    Maximum Height 51.2 in
    Minimum Width 44.6 in
    Maximum Width 47.4 in

    C18 ACERT TIER 3 STANDARD EQUIPMENT


    AIR INLET SYSTEM

    Separate circuit after-cooled (SCAC)

    Open Crankcase Ventilation (OCV) system

    Turbocharger, jacket water cooled

    Turbocharger inlet, 152 mm (6 in) OD straight connection


    COOLING SYSTEM

    Separate Circuit After-Cooling (SCAC) for both HEX and Keel cooled engines

    Engine JW and SCAC Shell & Tube Heat Exchangers for HEX cooled engines

    SCAC pump, gear driven, for HEX cooled engines only

    Jacket water pump, gear driven

    Sea water pump, bronze impeller, gear driven

    SCAC and JW shunt tanks for maintaining proper pump inlet pressures

    EXHAUST SYSTEM

    Water-cooled exhaust manifold & turbocharger

    152 mm (6 in) round flanged outlet

    FLYWHEELS & FLYWHEEL HOUSINGS

    Flywheel Housing, SAE No. 0

    Flywheel, 18 inch, 136 teeth

    SAE standard rotation

    SAE No. 1, Flywheel: 14 inch, 113 teeth

    FUEL SYSTEM

    Front service simplex fuel system

    Fuel transfer pump, gear driven

    Manual fuel priming pump

    Hybrid fuel line design

    LUBE SYSTEM

    Front service simplex oil system

    Center sump oil pan:

    Front and top service oil filler locations

    Front service dipstick

    Oil pump, gear driven


    MOUNTING SYSTEM

    Front support - adjustable

    POWER TAKE-OFFS

    Poly-V groove for alternator drive

    NOTE: There are no standard power take-offs available

    GENERAL

    Front damper guard

    Front service engine

    Common electrical bonding point

    Engine does not ship with zinc components

    Engine is certified to D2/E2 emissions cycles

    CERTIFIED TO EU STAGE IIIA AND CCNR STAGE II (E3 CYCLE) EMISSIONS


    STANDARDS.

    CONTROL SYSTEM

    Programmable low idle

    WOSR (Wide Operating Speed Range) available for EPA Tier 3 - B and C Ratings

    Adjustable High Idle (TEL) - EPA Tier 3 WOSR Ratings Only

    Electronic diagnostics and fault logging

    Engine and transmission monitoring (speed, temperature, pressure)

    Electronic fuel/air ratio contro

    Engine Protection Mode for extended ambient conditions - EPA Tier 3 Ratings Only

    Torque Limiting functionality for WOSR ratings only

    70-pin customer connector

    Three types of throttle inputs (primary/ secondary PWM, 0-5V, 4-20mA +/-

    C18 ACERT TIER 3 OPTIONAL EQUIPMENT


    EXHAUST SYSTEM

    Dry Elbows
    Water-Cooled Elbows

    Flexible Fitting

    Flange

    Muffler

    Muffler Spark Arresting

    AIR INLET SYSTEM

    Air Inlet Adapter

    CHARGING SYSTEM

    Battery Chargers

    Charging Alternators

    Alternator Mounting Group

    Ammeter

    CONTROL SYSTEM

    MECP I

    CATERPILLAR ALARM AND PROTECTION

    COOLING SYSTEM

    AUX EXPANSION TANK FLANGE KIT

    FUEL SYSTEM

    Duplex Fuel Filters

    Flexible Fuel Lines

    Fuel Cooler

    Primary Fuel Filters

    INSTRUMENTATION

    Instrument Panels

    OEM Wiring Harness

    Engine to Engine Harness

    Gauges
    Transmission Sensors

    Oil Level Sensor

    LUBE SYSTEM

    Duplex Oil Filters

    Transmission Oil Cooler

    Sump Pump

    MOUNTING SYSTEM

    Vibration Isolators

    Front Support

    Rear Support

    POWER TAKE-OFFS

    NOTE: PTO OPTIONS REQUIRE TORSIONAL VIBRATION ANALYSIS

    Crankshaft Pulleys

    Front Stub Shaft

    Hydraulic Pump Drive Adapter

    Front Enclosed Clutch

    PROTECTION SYSTEM

    Marine Classification Society and SOLAS

    Marine Classification Society and Fire Resistance

    STARTING SYSTEM

    STARTING SYSTEM Electric Starting Motors - Single 24 Volt

    Air Starting Motor

    Air Start Accessories

    Starting Aids - JW Heaters

    Battery Sets - 24 Volt - Dry

    PACKING

    Engine Protective Cover


    Storage Preservation

    Export Packing

    You might also like