Scribd
Upload
29 views4 pages

Sensitivity Analysis QAM

This sensitivity report summarizes the results of a sensitivity analysis conducted on a spreadsheet optimization model with decision variables S and D. The report shows that: - S has an allowable increase of 3.5 units and decrease of 3.7 units before impacting the optimal solution. D has an allowable increase of 5.285714286 and decrease of 2.333333333. - The constraints have small or zero shadow prices, indicating the optimal solution is not sensitive to small changes in the right-hand sides of those constraints. - Analyzing the sensitivity report is more efficient than individually changing coefficients to find alternative optimal solutions. The sensitivity analysis identifies how sensitive the optimal solution is to changes in the model

Uploaded by

mba23237
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
29 views4 pages

Sensitivity Analysis QAM

This sensitivity report summarizes the results of a sensitivity analysis conducted on a spreadsheet optimization model with decision variables S and D. The report shows that: - S has an allowable increase of 3.5 units and decrease of 3.7 units before impacting the optimal solution. D has an allowable increase of 5.285714286 and decrease of 2.333333333. - The constraints have small or zero shadow prices, indicating the optimal solution is not sensitive to small changes in the right-hand sides of those constraints. - Analyzing the sensitivity report is more efficient than individually changing coefficients to find alternative optimal solutions. The sensitivity analysis identifies how sensitive the optimal solution is to changes in the model

Uploaded by

mba23237
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Microsoft Excel 16.

0 Sensitivity Report
Worksheet: [sensitivity analysis QAM.xlsx]Sheet1
Report Created: 20-11-2023 17:20:52

Variable Cells
Final Reduced Objective Allowable Allowable
Cell Name Value Cost Coefficient Increase Decrease
$B$3 Dv (Decision Variables) S 540 0 10 3.5 3.7
$C$3 Dv (Decision Variables) D 252 0 9 5.285714286 2.333333333

Constraints
Final Shadow Constraint Allowable Allowable
Cell Name Value Price R.H. Side Increase Decrease
$D$7 STC (restrictions/constraints) LHS 630 4.375 630 52.36363636 134.4
$D$8 LHS 480 0 600 1E+030 120
$D$9 LHS 708 6.9375 708 192 128
$D$10 LHS 117 0 135 1E+030 18
upper limit of S is (10+3.5) and
lower limit is (10-3.7) which wont
affect the optimum values of the
decision variables, similarly for D

For zthe constraints, we need to anlayse the


constraint table
Final value the value given in the question
SHADOW PRICE will tell you that if you increase 1
unit then how will it impact the profit
for the zero values in the shadow price it will not
impact the profit as yhere is already unused time
S D
Dv (Decision Variables) 540 252 MAX 10S + 9D

Of (Objective Function) 7668 subject to (s.t) {put it in so


LHS Sign RHS 7/10S + 1D <= 630
1/2S + 5/6D <= 600
STC (restrictions/constraints) 0.70 1.00 630.00 630.00 1S + 3/3D <= 708
0.50 0.83 480.00 600.00 1/10S + 1/4D <= 135
1.00 0.67 708.00 708.00
0.10 0.25 117.00 135.00

alternative solution 9828.00


MAX 10S + 9D

subject to (s.t) {put it in solver}


7/10S + 1D <= 630
1/2S + 5/6D <= 600
1S + 3/3D <= 708
1/10S + 1/4D <= 135 in objective function we have
changed the coeeficient of S to 13
i.e. we have increased the profi of S
to 13 and then we have used solver
to look for the DV we found that it is
similar
then we have changed the
coeeficient to 14 and then observed
that the DV have changed to S=708,
D=0
now to check for ALTERNATIVE
SOLUTION we have put the 14 and
the prvious DV= 540,252 in the
equation 14*S+9*D and found that
profit or objective function is
different therefore it is not a
alternate solution
Checking each one in this way is not
easy so for that while usimg solver
when the after pressing solve the
next dialog box appears in that box
select the sensitivity option you will
get the sensitivity report

You might also like