Scribd Logo
Upload

Welcome to Scribd!

  • 8 views

    Epoxy Anticorrosive Paint - Mar 445 - Evas

    Uploaded by

    Engr. Imran Hasan Pathan
    MAR 445 is a two-component, polyamide cured, high-solids epoxy paint with anti-corrosive pigments that forms a hard, tough coating. It has good anti-corrosive properties and rapid curing. The paint can be used as a self-primed or intermediate coat in heavy-duty paint systems requiring low VOC and high film build. It is available in custom colors with a semi-matte finish and cures fully in 7 days at 25°C. The paint has a high solids content, requires abrasive blast cleaning for steel surfaces, and applies well via airless or air spray.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Epoxy Anticorrosive Paint - Mar 445 - Evas

    Uploaded by

    Engr. Imran Hasan Pathan
    8 views2 pages
    MAR 445 is a two-component, polyamide cured, high-solids epoxy paint with anti-corrosive pigments that forms a hard, tough coating. It has good anti-corrosive properties and rapid curing. The paint can be used as a self-primed or intermediate coat in heavy-duty paint systems requiring low VOC and high film build. It is available in custom colors with a semi-matte finish and cures fully in 7 days at 25°C. The paint has a high solids content, requires abrasive blast cleaning for steel surfaces, and applies well via airless or air spray.

    Original Description:

    !4744

    Original Title

    Epoxy Anticorrosive Paint_mar 445_evas

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MAR 445 is a two-component, polyamide cured, high-solids epoxy paint with anti-corrosive pigments that forms a hard, tough coating. It has good anti-corrosive properties and rapid curing. The paint can be used as a self-primed or intermediate coat in heavy-duty paint systems requiring low VOC and high film build. It is available in custom colors with a semi-matte finish and cures fully in 7 days at 25°C. The paint has a high solids content, requires abrasive blast cleaning for steel surfaces, and applies well via airless or air spray.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    8 views2 pages

    Epoxy Anticorrosive Paint - Mar 445 - Evas

    Uploaded by

    Engr. Imran Hasan Pathan
    MAR 445 is a two-component, polyamide cured, high-solids epoxy paint with anti-corrosive pigments that forms a hard, tough coating. It has good anti-corrosive properties and rapid curing. The paint can be used as a self-primed or intermediate coat in heavy-duty paint systems requiring low VOC and high film build. It is available in custom colors with a semi-matte finish and cures fully in 7 days at 25°C. The paint has a high solids content, requires abrasive blast cleaning for steel surfaces, and applies well via airless or air spray.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    TECHNICAL DATA SHEET

    MAR 445 EPOXY ANTICORROSIVE PAINT

    DEFINITION : MAR 445 is a two-component polyamide cured, high solids,contains anti corrosive pigments, high build epoxy
    paint. It forms a hard and tough coating, has good anticorrosive properities and rapid curing.

    AREAS OF APPLICATION: As a selfprimed, surface tolerant paint system or as an intermediate or finishing coat in heavy duty
    paint systems where low VOC and high film build are required

    TECHNICAL SPECIFICATIONS

    APPEARANCE : Semi Matt 20 ± 10 Gloss 60°


    COLOR : Produced in any requested colors.
    SOLID MATERIAL : Volume wise % 67± 5
    DENSITY (Depending on the color) : 1,42 ± 0,02 gr./ml.(mixture)
    VISCOSITY : 180 - 200 sec. (DIN 4 / 20°C)
    FLASH POINT : Above 24°
    MIXIN RATIO : 24 Kg + 5,4 Kg

    Film Thickness (microns)


    PAINTABLE AREA DRY FILM THICKNESS WET FILM THICKNESS THEORETICAL DISPERSION
    APPLICABLE (microns) 81-162 125-250 8,1 - 3,93
    RECOMMENDED 100 155 6,5

    DRYING AND CURING TIME


    AMB TEMP DUST DRYING TOUCH DRYING FULL CURE
    5°C 75 min 90 min 16 Days
    10°C 45 min 60 min 12 Days
    25°C 20 min 30 min 7 Days

    *445 is suitable for Forced Drying with 100°C for 30 minutes


    * Measure the values ​at DFT 60 microns.

    *Weathering/service temperatures: The natural tendency of epoxy coatings to chalk in outdoor exposure and to become
    more sensitive to mechanical damage and chemical exposure at elevated temperatures is also reflected in this product.
    APPLICATION DETAILS

    SURFACE PREPARATION:
    New steel: Abrasive blasting to minimum Sa 2½ (ISO 8501-1:2007) with a surface profile
    corresponding to Rugotest No. 3, N9a to N10, preferably BN9a to BN10, Keane-Tator Comparator, 2.0
    G/S or ISO Comparator, Medium (G).
    Zinc silicate painted or spray-metallized surfaces: Remove oil and grease, etc. with suitable
    detergent. Remove salt and other contaminants by (high pressure) fresh water cleaning. Zinc salts
    (white rust) must be removed by high pressure hosing combined with rubbing with a stiff nylon brush
    if necessary. It is recommended to recoat spray-metallized surfaces as soon as possible to avoid
    possible contamination.
    Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove
    salts and other contaminants by high pressure fresh water cleaning. Clean damaged areas thoroughly
    by power tool cleaning to minimum St 2 (spot-repairs) or by abrasive blasting to min. Sa 2, preferably
    to Sa 2½ (ISO 8501-1:1988). Improved surface preparation will improve the performance of the
    product.

    MIXING RATIO : 2 pack paint with 24 kg A comp +5,4 kg B comp.

    APPLICATION CONDITIONS: Apply only on a dry and clean surface with a temperature above the dew
    point to avoid condensation. Use only where application and curing can proceed at temperatures
    above: - 5°/23°F, preferably above 0°C/32°F. The temperature of paint itself should be 15°C/59°F or
    above. In confined spaces provide adequate ventilation during application and drying.

    Application methods : Airless spray / Air spray / Brush

    STORAGE: Storage conditions are to keep in dry and cool. Containers must be covered until ready to use. The shelf life of the paint which is kept in
    recommended conditions is one year.
    HEALTH AND SAFETY: Due to volatile solvent within the system, sufficient ventilation in the closed rooms should be made and it should be protected
    from high temperature and open flames.
    FIRE AND HAZARD CLASS: Class II. (It contains the liquids within waters that are never miscible under any rates and ways which emit flammable gases

    SYMBOL : Xn
    HAZARD WARNINGS: 11-20 /21/22
    SAFETY WARNINGS: 16 / 21-24 /25-38
    The information in this data sheet is given to the best our knowledge based on laboratory testing and practical experience.
    The information submitted should be obtained when applied under the mentioned conditions. However, as the product is
    often used under adverse conditions beyond our control, we cannot provide a guarantee in this regard.

    You might also like