Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    VTP

    Uploaded by

    yassine rezgui
    The document describes the configuration of VLANs on multiple switches. It shows: 1) A switch being configured as a VTP transparent switch with VLAN 100 created. 2) A second switch being configured as a VTP client switch. 3) A third switch being configured as a VTP server switch with VLANs 10-50 created and named.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    VTP

    Uploaded by

    yassine rezgui
    6 views5 pages
    The document describes the configuration of VLANs on multiple switches. It shows: 1) A switch being configured as a VTP transparent switch with VLAN 100 created. 2) A second switch being configured as a VTP client switch. 3) A third switch being configured as a VTP server switch with VLANs 10-50 created and named.

    Original Title

    vtp

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes the configuration of VLANs on multiple switches. It shows: 1) A switch being configured as a VTP transparent switch with VLAN 100 created. 2) A second switch being configured as a VTP client switch. 3) A third switch being configured as a VTP server switch with VLANs 10-50 created and named.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    6 views5 pages

    VTP

    Uploaded by

    yassine rezgui
    The document describes the configuration of VLANs on multiple switches. It shows: 1) A switch being configured as a VTP transparent switch with VLAN 100 created. 2) A second switch being configured as a VTP client switch. 3) A third switch being configured as a VTP server switch with VLANs 10-50 created and named.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    Swi2 :

    Press RETURN to get started!

    %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    Switch>ena
    Switch>enable
    Switch#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#vtp dom
    Switch(config)#vtp domain GTEC
    Changing VTP domain name from NULL to GTEC
    Switch(config)#vtp mo
    Switch(config)#vtp mode tr
    Switch(config)#vtp mode transparent
    Setting device to VTP TRANSPARENT mode.
    Switch(config)#
    Switch(config)#int
    Switch(config)#interface f0/1
    Switch(config-if)#swi
    Switch(config-if)#switchport mode tr
    Switch(config-if)#switchport mode trunk

    Switch(config-if)#
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to
    down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    Switch(config-if)#
    Switch(config-if)#end
    Switch#
    %SYS-5-CONFIG_I: Configured from console by console

    Switch#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#vlan 100
    Switch(config-vlan)#name vlan100
    Switch(config-vlan)#exit
    Switch(config)#exit
    Switch#
    %SYS-5-CONFIG_I: Configured from console by console

    Switch#sh
    Switch#show vlan
    VLAN Name Status Ports
    ---- -------------------------------- --------- -------------------------------
    1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5
    Fa0/6, Fa0/7, Fa0/8, Fa0/9
    Fa0/10, Fa0/11, Fa0/12, Fa0/13
    Fa0/14, Fa0/15, Fa0/16, Fa0/17
    Fa0/18, Fa0/19, Fa0/20, Fa0/21
    Fa0/22, Fa0/23, Fa0/24, Gig0/1
    Gig0/2
    100 vlan100 active
    1002 fddi-default act/unsup
    1003 token-ring-default act/unsup
    1004 fddinet-default act/unsup
    1005 trnet-default act/unsup

    VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
    ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
    1 enet 100001 1500 - - - - - 0 0
    100 enet 100100 1500 - - - - - 0 0
    1002 fddi 101002 1500 - - - - - 0 0
    1003 tr 101003 1500 - - - - - 0 0
    1004 fdnet 101004 1500 - - - ieee - 0 0
    1005 trnet 101005 1500 - - - ibm - 0 0

    Remote SPAN VLANs


    ------------------------------------------------------------------------------

    Primary Secondary Type Ports


    ------- --------- ----------------- ------------------------------------------
    Switch#
    Switch#
    Switch#
    Switch#
    Switch#
    Switch#
    Switch#

    Swit1 :

    Press RETURN to get started!

    %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    %LINK-5-CHANGED: Interface FastEthernet0/2, changed state to up


    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up

    Switch>en
    Switch>enable
    Switch#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#vtp dom
    Switch(config)#vtp domain GTEC
    Changing VTP domain name from NULL to GTEC
    Switch(config)#vtp mo
    Switch(config)#vtp mode cli
    Switch(config)#vtp mode client
    Setting device to VTP CLIENT mode.
    Switch(config)#
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to
    down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    Switch(config)#int
    Switch(config)#interface f0/1
    Switch(config-if)#swi
    Switch(config-if)#switchport mo
    Switch(config-if)#switchport mode tr
    Switch(config-if)#switchport mode trunk
    Switch(config-if)#exit
    Switch(config)#int
    Switch(config)#interface f0/2
    Switch(config-if)#swi
    Switch(config-if)#switchport mod
    Switch(config-if)#switchport mode tr
    Switch(config-if)#switchport mode trunk
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to
    down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up

    Switch(config-if)#
    Switch(config-if)#end
    Switch#
    %SYS-5-CONFIG_I: Configured from console by console

    Switch#sh
    Switch#show vl
    Switch#show vlan

    VLAN Name Status Ports


    ---- -------------------------------- --------- -------------------------------
    1 default active Fa0/3, Fa0/4, Fa0/5, Fa0/6
    Fa0/7, Fa0/8, Fa0/9, Fa0/10
    Fa0/11, Fa0/12, Fa0/13, Fa0/14
    Fa0/15, Fa0/16, Fa0/17, Fa0/18
    Fa0/19, Fa0/20, Fa0/21, Fa0/22
    Fa0/23, Fa0/24, Gig0/1, Gig0/2
    10 vlan10 active
    20 vlan20 active
    30 vlan30 active
    40 vlan40 active
    50 vlan50 active
    1002 fddi-default act/unsup
    1003 token-ring-default act/unsup
    1004 fddinet-default act/unsup
    1005 trnet-default act/unsup

    VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
    ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
    1 enet 100001 1500 - - - - - 0 0

    Switch#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#vla
    Switch(config)#vlan 60
    VTP VLAN configuration not allowed when device is in CLIENT mode.
    Switch(config)#

    Swi0 :

    Press RETURN to get started!

    %LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    Switch>enab
    Switch>enable
    Switch#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#vlan 10
    Switch(config-vlan)#name vlan10
    Switch(config-vlan)#exit
    Switch(config)#vlan 20
    Switch(config-vlan)#name vlan20
    Switch(config-vlan)#exit
    Switch(config)#vlan 30
    Switch(config-vlan)#na
    Switch(config-vlan)#name vlan30
    Switch(config-vlan)#exit
    Switch(config)#vlan 40
    Switch(config-vlan)#nam
    Switch(config-vlan)#name vlan40
    Switch(config-vlan)#exi
    Switch(config-vlan)#exit
    Switch(config)#vlan 50
    Switch(config-vlan)#name vlan50
    Switch(config-vlan)#exit
    Switch(config)#end
    Switch#
    %SYS-5-CONFIG_I: Configured from console by console
    wr
    Building configuration...
    [OK]
    Switch#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Switch(config)#vtp dom
    Switch(config)#vtp domain GTEC
    Changing VTP domain name from NULL to GTEC
    Switch(config)#vtp mo
    Switch(config)#vtp mode ser
    Switch(config)#vtp mode server
    Device mode already VTP SERVER.
    Switch(config)#vtp ver
    Switch(config)#vtp version 2
    Switch(config)#int
    Switch(config)#interface f0/1
    Switch(config-if)#swi
    Switch(config-if)#switchport mode tr
    Switch(config-if)#switchport mode trunk

    Switch(config-if)#
    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to
    down

    %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

    Switch(config-if)#

    You might also like