Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    7405 1190343 PDF

    Uploaded by

    MIRJAKHON M
    This document provides information on the DM7405 hex inverters integrated circuit. It contains six independent logic inverter gates with open-collector outputs that require external pull-up resistors. The document describes the device's general features, electrical characteristics such as voltage and current ratings, ordering information, and a pin diagram.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    7405 1190343 PDF

    Uploaded by

    MIRJAKHON M
    18 views4 pages
    This document provides information on the DM7405 hex inverters integrated circuit. It contains six independent logic inverter gates with open-collector outputs that require external pull-up resistors. The document describes the device's general features, electrical characteristics such as voltage and current ratings, ordering information, and a pin diagram.

    Original Title

    7405-1190343.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on the DM7405 hex inverters integrated circuit. It contains six independent logic inverter gates with open-collector outputs that require external pull-up resistors. The document describes the device's general features, electrical characteristics such as voltage and current ratings, ordering information, and a pin diagram.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    18 views4 pages

    7405 1190343 PDF

    Uploaded by

    MIRJAKHON M
    This document provides information on the DM7405 hex inverters integrated circuit. It contains six independent logic inverter gates with open-collector outputs that require external pull-up resistors. The document describes the device's general features, electrical characteristics such as voltage and current ratings, ordering information, and a pin diagram.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    DM7405 Hex Inverters with Open-Collector Outputs

    December 1986
    Revised February 2000

    DM7405
    Hex Inverters with Open-Collector Outputs
    General Description Pull-Up Resistor Equations
    This device contains six independent gates each of which
    performs the logic INVERT function. The open-collector
    outputs require external pull-up resistors for proper logical
    operation.

    Where: N1 (IOH) = total maximum output high current


    for all outputs tied to pull-up resistor
    N2 (IIH) = total maximum input high current for
    all inputs tied to pull-up resistor
    N3 (IIL) = total maximum input low current for
    all inputs tied to pull-up resistor

    Ordering Code:
    Order Number Package Number Package Description
    DM7405N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide

    Connection Diagram Function Table


    Y=A
    Input Output
    A Y
    L H
    H L
    H = HIGH Logic Level
    L = LOW Logic Level

    © 2000 Fairchild Semiconductor Corporation DS006495 www.fairchildsemi.com


    DM7405
    Absolute Maximum Ratings(Note 1)
    Note 1: The “Absolute Maximum Ratings” are those values beyond which
    Supply Voltage 7V the safety of the device cannot be guaranteed. The device should not be
    operated at these limits. The parametric values defined in the Electrical
    Input Voltage 5.5V Characteristics tables are not guaranteed at the absolute maximum ratings.
    Output Voltage 7V The “Recommended Operating Conditions” table will define the conditions
    for actual device operation.
    Operating Free Air Temperature Range 0°C to +70°C
    Storage Temperature Range −65°C to +150°C

    Recommended Operating Conditions


    Symbol Parameter Min Nom Max Units
    VCC Supply Voltage 4.75 5 5.25 V
    VIH HIGH Level Input Voltage 2 V
    VIL LOW Level Input Voltage 0.8 V
    VOH HIGH Level Output Voltage 5.5 V
    IOL LOW Level Output Current 16 mA
    TA Free Air Operating Temperature 0 70 °C

    Electrical Characteristics
    over recommended operating free air temperature range (unless otherwise noted)
    Typ
    Symbol Parameter Conditions Min Max Units
    (Note 2)
    VI Input Clamp Voltage VCC = Min, II = −12 mA −1.5 V
    ICEX HIGH Level VCC = Min, VO = 5.5V
    250 µA
    Output Current VIL = Max
    VOL LOW Level VCC = Min, IOL = Max
    0.2 0.4 V
    Output Voltage VIH = Min
    II Input Current @ Max Input Voltage VCC = Max, VI = 5.5V 1 mA
    IIH HIGH Level Input Current VCC = Max, VI = 2.4V 40 µA
    IIL LOW Level Input Current VCC = Max, VI = 0.4V −1.6 mA
    ICCH Supply Current with Outputs HIGH VCC = Max 6 12 mA
    ICCL Supply Current with Outputs LOW VCC = Max 18 33 mA
    Note 2: All typicals are at VCC = 5V, TA = 25°C.

    Switching Characteristics
    at VCC = 5V and TA = 25°C
    Symbol Parameter Conditions Min Max Units
    tPLH Propagation Delay Time CL = 15 pF
    55 ns
    LOW-to-HIGH Level Output RL = 4 kΩ (tPLH)
    tPHL Propagation Delay Time RL = 400Ω (tPHL)
    15 ns
    HIGH-to-LOW Level Output

    www.fairchildsemi.com 2
    DM7405 Hex Inverters with Open-Collector Outputs
    Physical Dimensions inches (millimeters) unless otherwise noted

    14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide


    Package Number N14A

    Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
    Fairchild reserves the right at any time without notice to change said circuitry and specifications.
    LIFE SUPPORT POLICY

    FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
    DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
    SEMICONDUCTOR CORPORATION. As used herein:
    1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
    which, (a) are intended for surgical implant into the device or system whose failure to perform can be rea-
    body, or (b) support or sustain life, and (c) whose failure sonably expected to cause the failure of the life support
    to perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
    instructions for use provided in the labeling, can be rea-
    sonably expected to result in a significant injury to the www.fairchildsemi.com
    user.

    3 www.fairchildsemi.com
    Mouser Electronics

    Authorized Distributor

    Click to View Pricing, Inventory, Delivery & Lifecycle Information:

    onsemi:
    DM7405N

    You might also like