SoR 2014-15 - Without Calculation

Total
Buildings Embedded
S.No Code Particulars Unit
SoR : 2014-15 Tax Rate
(%)
A BRICKS & BUILDING BLOCKS

Common burnt clay bricks of class as per Table-1 of IS:1077-
BMT-
1 1992 Non-Modular or traditional size 23 x 11 x 7 cm (ex-quarry 1000 Nos 4,700.00 0
A.01
price - excluding cost of conveyance, loading & unloading)
Common burnt clay bricks of class as per Table-1 of IS:1077-
BMT-
2 1992 Modular or traditional size 19 x 9 x 9 cm (ex-quarry price - 1000 Nos 5,500.00 0
A.02
excluding cost of conveyance, loading & unloading)
Fly ash cement/lime solid blocks with compressive strength of
BMT- 75 kg/sq.cm - IS:12894-1990 - CLASS - 7.5 (ex-quarry price -
3 Each 25 0
A.03 excluding cost of conveyance, loading & unloading) 290 x 225 x
140 mm
4 Each 23 0
140 mm
5 Each 20 0
140 mm
6 Each 14 0
A.06 excluding cost of conveyance, loading & unloading) 290 x
112/100 x 140 mm
7 Each 7 0
60 mm
8 Each 15 0
140 mm
9 Each 12 0
140 mm
Fly ash cement/ lime solid blocks with compressive strength of
BMT- 50 kg/sq.cm - IS:12894-1990 - CLASS - 5 (ex-quarry price -
10 Each 24 0
140 mm
11 Each 19 0
140 mm
12 Each 19 0
140 mm
13 Each 11 0
A.13 excluding cost of conveyance, loading & unloading) 290 x
112/100 x 140 mm
14 Each 5 0
60 mm
1
Total
Buildings Embedded
(%)

15 Each 12 0
140 mm
16 Each 11 0
140 mm
BMT-
17 Supply of well burnt cinder aggregates as per IS: 2686-1977 1 Cum 670 28.85
A.17
Supply of Aerated (Cellular) Autoclaved Concrete Blocks
BMT- conforming to IS:2185 (Part-3) - 1984 and IS:6441-1972 of
18 Each 56 19.15
A.18 Compressive strength 3 N/mm2 (landing cost - including cost of
conveyance, loading & unloading) 600 x 200 x 100 mm
19 Each 82 18.84
20 Each 110 18.28
21 Each 125 17.92
NATURAL FLOORING STONES (ex-quarry price - excluding cost
B
of conveyance, loading & unloading)
BMT- Kadapa slab 40 mm thick and size not less than 0.457 M x 0.457
22 1 Sqm 96 5.49
B.01 M
BMT- Kadapa slab 50 mm thick and size not less than 0.457 M x 0.457
23 1 Sqm 110 4.76
B.02 M
BMT- Shahabad /Tandur Rough Stone slabs of minimum of 25 mm
24 10 Sqm 961 5.03
B.03 thick
BMT-
25 Shahabad / Tandur Rough Stone slabs of minimum 40 mm thick 10 Sqm 1,239.00 5
B.04
BMT- Polished Shahabad/ Tandur stone slabs of 15 to 18 mm thick
26 10 Sqm 1,654.00 5.02
B.05 (0.457x0.304) or any other size as specified
BMT- Polished black Kadapa slabs minimum of 15 mm thick
27 10 Sqm 1,379.00 5.03
B.06 (0.457x0.457M)
BMT- Polished Bethamcherla pure (marble type) white stone
28 10 Sqm 3,859.00 5.01
B.07 minimum 25 mm thick (0.254Mx0.254M)
BMT- Polished Bethamcherla coloured stone minimum 25 mm thick
29 10 Sqm 2,756.00 4.99
B.08 (0.254M x0.254M)
BMT- High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M)
30 1 Sqm 2,947.00 14.49
B.09 other than black/ premium colours
31 1 Sqm 2,562.00 14.48
B.10 other than black and regular colours
32 1 Sqm 2,178.00 14.51
B.11 black
Polished Marble slabs of any variety (Such as Dongari/ Adanga/
BMT-
33 Marodh/ Rajganpur etc) 16 mm to 20 mm (average) thick (size 1 sqm 729 14.44
B.12
0.457 M x 0.457 M) / (0.6M x 0.6M)
Polished Marble slabs of any variety (Such as Dongari/ Adanga/
BMT-
34 Marodh/ Rajganpur etc) polished 16 mm to 20 mm (average) 1 sqm 589 14.59
B.13
thick 0.305 M x 0.305 M
2
Total
Buildings Embedded
(%)
Polished Marble slabs of any variety and gang saw cut (Such as
BMT-
35 Dongari/ Adanga/ Marodh/ Rajganpur etc) 16 mm to 20 mm 1 sqm 999 14.56
B.14
(average) thick ( 0.610 M width of any length)
BMT-
36 Polished Marble Tiles 8 mm thick of all sizes and varieties 1 sqm 476 14.42
B.15
BMT-
37 Granite stone tiles 8 mm thick (mirror polished of all shades) 1 sqm 999 14.56
B.16
WALL & FLOOR TILES (landing cost - including cost of
C
conveyance, loading & unloading)
BMT- Supply of Ceramic floor tiles of not less than 7.3mm thick 1st
38 1 sqm 465 28.81
C.01 quality in all shades and designs
BMT- Supply of Edge Cut - Rectified Ceramic floor tiles of not less than
39 1 sqm 560 28.74
C.02 8 mm thick 1st quality in all shades and designs
BMT- Supply of decorated white background glazed wall tiles of any
40 1 sqm 571 28.89
C.03 size and of 5 to 7 mm thick
BMT- Supply of screen printed, decorated coloured background glazed
41 1 sqm 636 28.74
C.04 wall tiles of any size and of 5 to 7 mm thick
BMT- Supply of decorated coloured background glazed wall tiles of any
42 1 sqm 603 28.85
C.05 size and of 5 to 7 mm thick
BMT- Supply of Ist quality, plain white glazed wall tiles of any size and
43 1 sqm 348 28.89
C.06 of 5 to 7 mm thick
BMT- Supply of Ist Quality, glazed plain coloured wall tiles of any size
44 1 sqm 413 28.66
C.07 and of 5 to 7 mm thick
BMT-
45 Supply of precast terrazzo tiles 20 mm thick of medium shades 1 sqm 305 28.69
C.08
BMT-
46 Supply of precast terrazzo tiles 20 mm thick of dark shades 1 Sqm 297 28.57
C.09
BMT-
47 Supply of coloured precast terrazzo tiles of 20 mm thick 1 Sqm 320 29.03
C.10
BMT-
48 Supply of white/ plain precast terrazzo tiles of 20 mm thick 1 Sqm 248 28.5
C.11
BMT-
49 Supply of grey precast terrazzo tiles of 20 mm thick 1 Sqm 161 28.8
C.12
BMT- Supply of vitrified polished floor tiles of size not less than 900 x
50 1 Sqm 1,274.00 28.82
C.13 900 x 10 mm thickness regular finish and normal colours
51 1 Sqm 1,123.00 28.78
C.14 795 mm x 8 mm thickness regular finish and normal colours
52 1 Sqm 1,048.00 28.75
C.15 598 mm x 8 mm thickness glossy finish premium colours
53 1 Sqm 631 28.78
C.16 598 mm x 8 mm thickness regular finish and normal colours
54 1 Sqm 674 28.87
C.17 400 x7mm thickness normal colours
BMT-
55 Supply of glass mosaic tiles 1st quality of size 20x20x4 mm thick 1 Sqm 1,423.00 28.78
C.18
Providing of Vitrified/ Ceramic Tile flooring for required
areas using different sizes, approved colour and make fixing with
BMT-
56 synthetic/ epoxy adhesive in specified thickness without joint 1 Sqm 154 2.29
C.19
including all taxes excluding cost of tiles 600 x 600 mm and
above sizes tiles.
3
Total
Buildings Embedded
(%)
Providing of Vitrified/ Ceramic Tile flooring for required

areas using different sizes, approved colour and make fixing with
BMT-
57 synthetic/ epoxy adhesive in specified thickness without joint 1 Sqm 124 2.29
C.20
including all taxes excluding cost of tiles 400 x 400 mm and
below size tiles
Providing tile flooring with synthetic/ epoxy adhesive in
BMT- specified thick and pointing specified colour cement based
58 1 Sqm 176 2.29
C.21 polymer grout mixed with grout admix including all taxes
excluding cost of tiles: 600 x 600 mm tiles with 3 mm joints width

59 1 Sqm 184 2.29
excluding cost of tiles:600 x 600 mm tiles with 4 mm joints width

60 1 Sqm 177 2.29

61 1 Sqm 187 2.29

62 1 Sqm 184 2.29

63 1 Sqm 200 2.29

64 1 Sqm 193 2.29

65 1 Sqm 211 2.29
Providing Glass Mosaic tiles using specified pattern fixing with
BMT-
66 grout and approved colour of joint filling with admix cement 1 Sqm 307 2.29
C.29
grouting including all taxes excluding cost of tiles
BMT-
67 specified thick and pointing with specified colour epoxy grout 1 Sqm 356 2.29
C.30

BMT-
C.31
4
Total
Buildings Embedded
(%)

BMT-
C.32

BMT-
C.33

BMT-
C.34

BMT-
C.35

BMT-
C.36

BMT-
74 epoxy grout and approved colour of joint filling with admix 1 Sqm 294 2.29
C.37
cement grouting including all taxes excluding cost of tiles
BMT-
75 epoxy grout and approved colour cement admix grout including 1 Sqm 1,310.00 2.29
C.38
all taxes excluding cost of tiles
BMT- Supply of design wall tiles of any colour and size other than
76 1 Sqm 436 28.99
C.39 highlighters and of thickness 8 to 10 mm including all taxes
BMT- Supply of design highlighters wall tiles of any colour and size and
77 1 Sqm 497 28.76
C.40 of thickness 8 to 10 mm including all taxes
Supply of design highlighters wall tiles of premium / radium
BMT-
78 colours and of any size and of thickness 8 to 10 mm including all 1 Sqm 560 28.74
C.41
taxes
BMT- Supply of plain exterior wall tiles of thickness 20 mm of any size
79 1 Sqm 447 28.82
C.42 for wall claddings
BMT- Supply of exterior design wall tiles of thickness 20 mm of any size
80 1 Sqm 572 28.83
C.43 for wall claddings
BMT- Supply of Plain design floor and wall tiles set with floor tiles of
81 1 Sqm 643 28.86
C.44 thickness 15 mm and wall tiles of thickness 9 mm
BMT- Supply of textured design floor and wall tiles set with floor tiles
82 1 Sqm 691 28.92
C.45 of thickness 15 mm and wall tiles of thickness 9 mm
BMT- Supply of premium plain design floor and wall tiles set with floor
83 1 Sqm 930 28.81
C.46 tiles of thickness 15 mm and wall tiles of thickness 9 mm
BMT- Supply of premium textured design floor and wall tiles set with
84 1 Sqm 966 28.8
C.47 floor tiles of thickness 15 mm and wall tiles of thickness 9 mm
Supply of premium plain design highlighter combination floor
BMT-
85 and wall tiles set with floor tiles of thickness 15 mm and wall tiles 1 Sqm 1,213.00 28.77
C.48
of thickness 9 mm but excluding highlighters
Supply of premium plain design highlighter combination floor
BMT-
86 and wall tiles set with floor tiles of thickness 15 mm and wall tiles 1 Sqm 1,243.00 28.81
C.49
of thickness 9 mm but including highlighters
5
Total
Buildings Embedded
(%)
Vitrified polished floor tiles of size not less than 1000 x 1000 x 10
BMT-
87 mm thickness with nano technology printing and high glossy 1 Sqm 1,747.00 28.83
C.50
finish/ premium colours
Vitrified polished floor tiles of size not less than 795 x 795 mm x
BMT-
88 8 mm thickness with nano technology printing and high glossy 1 Sqm 1,543.00 28.8
C.51
finish/ premium colours special series
BMT- 8 mm thickness with nano technology printing and glossy finish
89 1 Sqm 1,263.00 28.88
C.52 premium colours high glossy finish/ premium colours special
series
BMT- 10 mm thickness with nano technology printing and glossy finish
90 1 Sqm 1,398.00 28.85
C.53 premium colours high glossy finish/ premium colours special
series
PAVING & INTERLOCKING TILES (landing cost - including cost of
D
BMT- Chequered Terrazzo tiles of 22 mm thick (Medium shade) 0.254
91 1 sqm 314 28.69
D.01 M x 0.406 M
BMT- Chequered Terrazzo tiles of 22 mm thick (Dark shade) 0.254 M x
92 1 sqm 288 28.57
D.02 0.406 M
BMT- Chequered Terrazzo tiles of 30 mm thick ( Light shade) 0.305 M
93 1 sqm 288 28.57
D.03 x 0.305 M
BMT- Chequered Terrazzo tiles of 30 mm thick (Dark shade) 0.305 M x
94 1 sqm 306 28.57
D.04 0.305 M
BMT- Chequered Terrazzo tiles of 30 mm thick ( medium shade) 0.305
95 1 sqm 270 28.57
D.05 M x 0.305 M
Supply, laying & fixing of 60 mm thick cement Mosaic reflective
BMT- concrete pavers of grade M-40 and above including labour
96 1 Sqm. 569 25.33
D.06 charges, loading & unloading, laying to desired lines and levels
complete excluding cost of cement, sand, water, electricity etc
Supply, laying & fixing of 30 mm thick cement Mosaic reflective

BMT- concrete pavers of grade M-40 and above including labour
97 1 Sqm. 588 25.11
D.07 charges, loading & unloading, laying to desired lines and levels
complete excluding cost of cement, sand, water, electricity etc
Supply of high strength Cement Concrete Designer Tiles of 30
BMT- mm thickness of M- 40 Grade of which top 12 mm thick shall be
98 1 Sqm 518 28.86
D.08 for colour pigmentation with imported colours and white
cement to get required reflective glazing inclusive of all taxes
Supply of high strength Cement Concrete interlocking Designer
Pavers of 60 mm thickness of M- 40 Grade of which top 12 mm
BMT-
99 thick shall be for colour pigmentation with imported colours and 1 Sqm 571 28.89
D.09
white cement to get required reflective glazing inclusive of all
taxes
Supply of high strength Cement Concrete interlocking Designer
BMT-
D.10
taxes
Supply of high strength Cement Concrete interlocking Regular
BMT-
D.11
taxes
6
Total
Buildings Embedded
(%)
Supply of high strength Cement Concrete interlocking Regular

BMT-
D.12
taxes
Supply of high strength Cement Concrete pre-polished ready to
BMT- lay floor tiles of any colour, design and any size with 22 mm
103 1 Sqm 558 28.87
D.13 thickness including all taxes with compressive strength not less
than 450 Kg/cm² conforming to IS 516
BMT- Supply of high strength Cement Concrete Step tiles of regular
104 1 Sqm 638 28.89
D.14 colour, design and of 25 mm thickness including all taxes
Supply of high strength Cement Concrete pre-polished Step tiles
BMT-
105 of any premium colour, design and of 25 mm thickness including 1 Sqm 712 28.75
D.15
all taxes
Supply of Cement Concrete interlocking Pavers of 60 mm
BMT-
106 thickness and dumbbell, zig-zag, I-block shapes etc., inclusive of 1 Sqm 460 28.85
D.16
all taxes
BMT-
D.17
all taxes
BMT-
D.18
all taxes
TIMBER & ROOFING MATERIALS (landing cost - including cost of
E
Note: Before proposing the Teak Wood Items, the estimating
authorities shall obtain prior approval from the competent
authority
BMT-
109 Medium Teak Wood scantlings: up to 2.0 M 1 cum 76,280.00 14.5
E.01
BMT-
110 Medium Teak Wood scantlings: 2.0 to 3.0 M 1 cum 84,756.00 14.5
E.02
BMT-
111 Medium Teak Wood scantlings: above 3.0 M 1 cum 93,232.00 14.5
E.03
BMT-
112 Medium Teak Wood Plancks: any thickness 1 cum 152,561.00 14.5
E.04
BMT-
113 Best Teak Wood scantlings: up to 2.0 M 1 cum 131,372.00 14.5
E.05
BMT-
114 Best Teak Wood scantlings: 2.0 to 3.0 M 1 cum 139,848.00 14.5
E.06
BMT-
115 Best Teak Wood scantlings: above 3.0 M 1 cum 148,324.00 14.5
E.07
BMT-
116 Best Teak Wood Plancks: any thickness 1 cum 165,275.00 14.5
E.08
BMT-
117 Burma Teak Wood scantlings: up to 2.0 M 1 cum 136,363.00 14.5
E.09
BMT-
118 Burma Teak Wood scantlings: 2.0 to 3.0 M 1 cum 140,258.00 14.5
E.10
BMT-
119 Burma Teak Wood scantlings: above 3.0 M 1 cum 147,522.00 14.5
E.11
BMT-
120 Burma Teak Wood Plancks: any thickness 1 cum 159,741.00 14.5
E.12
BMT-
121 Assam Teak Wood scantlings: any length 1 cum 48,392.00 14.5
E.13
BMT-
122 Assam Teak Wood Plancks: any thickness 1 cum 70,170.00 14.5
E.14
7
Total
Buildings Embedded
(%)
BMT-
123 Sal Wood scantlings: any length 1 cum 51,994.00 14.5
E.15
BMT-
124 Sal Wood Plancks: any thickness 1 cum 69,327.00 14.5
E.16
BMT-
125 A.C sheet Corrugated 6 mm thick 1 sqm 222 29.07
E.17
BMT-
126 A.C sheet plain 4 m thick 1 sqm 159 29.27
E.18
BMT-
127 A.C sheet plain 6 m thick 1 sqm 165 28.91
E.19
BMT- Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1 mm
128 1 kg 60 17.65
E.20 to 0.8 mm thickness)
MILD, GALVANIZED & STAINLESS STEEL (landing cost -
F
including cost of conveyance, loading & unloading)
Mild Steel Hallow single rebate general purpose door frames
manufactured using cold roll formed process steel sheet of 1.25
mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-
BMT- B of size 105 x 60 mm conforming to IS 4351 - 2003 including
129 1 Rm 378 15.95
F.01 pretreatment, phosphating with butt hinges, Base Ties, Holdfast
Lugs, Mortar Guards, shock absorbers and provision for Tower
Bolts, Aldrops, Lock & Strike plates etc. for both single and double
shutter doors
BMT-
130 Country Nails 1 Kg 61 5.17
F.02
BMT-
131 Wire Nails 1 Kg 61 5.17
F.03
BMT-
132 Mild Steel Tubes & pipes of all diameters as per IS-1161 1 Kg 61 17.31
F.04
BMT- Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes &
133 1 Kg 200 18.34
F.05 diameters - 202 Grade
BMT- Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes &
134 1 Kg 355 17.94
F.06 diameters for - 304 Grade
Supplying Galvanized Steel Barbed wire conforming to IS 278 -
BMT-
135 1978 : Type A - IOWA Type Designation as per standard 1 Kg 82 18.84
F.07
specification
Supplying Galvanized Steel Barbed wire conforming to IS 278 -
BMT-
136 1978 : Type B - Glidden Type Designation as per standard 1 Kg 82 18.84
F.08
specification
BMT- Expanded metal sheets as per IS-412-1962- Light Weight-25
137 1 Sqm 146 17.74
F.09 mm(SWM)x75 mm (LWM)3.25 mm Wide and 1.25 mm thick
138 1 Sqm 146 17.74
F.10 mm(SWM)x60 mm(LWM) 2.50 mm Wide and 1.25 mm thick
139 1 Sqm 146 17.74
BMT- Expanded metal sheets as per IS-412-1962- Medium Weight-25
140 1 Sqm 200 18.34

141 1 Sqm 200 18.34

142 1 Sqm 200 18.34
BMT- Expanded metal sheets as per IS-412-1962- Heavy Weight-25
143 1 Sqm 228 18.13
8
Total
Buildings Embedded
(%)

144 1 Sqm 228 18.13
145 1 Sqm 228 18.13
BMT-
146 Galvanized Iron fly proof wire mesh of not less than 20 gauge 1 Sqm 217 17.93
F.18
BMT-
147 Stainless steel fly proof wire mesh of not less than 20 gauge 1 Sqm 527 18.16
F.19
BMT- Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm)
148 1 Sqm 477 18.07
F.20 as per IS: 2721-1979: 2"x2" (50 mm x 50 mm) - 8 Gauge
149 1 Sqm 378 18.13
F.21 as per IS: 2721-1979: 2½"x2½" (63 mm x 63 mm) - 8 Gauge
150 1 Sqm 322 17.95
151 1 Sqm 239 18.32
Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm)
BMT-
152 as per IS: 2721-1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 1 Sqm 575 18.07
F.24
Gauge
BMT-
153 as per IS: 2721-1979 - PVC Coated - 2½"x2½" (63 mm x 63 mm) - 1 Sqm 477 18.07
F.25
8 Gauge
BMT-
154 as per IS: 2721-1979 - PVC Coated - 3"x3" (76 mm x 76 mm) - 8 1 Sqm 393 18.02
F.26
Gauge
BMT-
155 as per IS: 2721-1979 - PVC Coated - 4"x4" (102 mm x 102 mm) - 1 Sqm 307 18.08
F.27
8 Gauge
BMT-
156 Rabbit wire mesh (chicken mesh) of not less than 30 gauge 1 Sqm 17 21.43
F.28
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine
rolled CRCA laths, interlocked together through their entire
length and jointed together at the ends by end-locks, mounted on
specially designed pipe shaft of 50mm dia nominal bore MS B
BMT- class pipe with brackets, plates, guide channels, stoppers, bottom
157 1 Sqm 2,861.00 25.21
F.29 locking plates and arrangements for inside & outside locking
with push-pull operations including cost of hood cover and
springs complete, painted with one coat of approved steel
primer, locks, ball bearings, all accessories etc complete for
finished item of work as per special spn: 1108
Supplying & fixing collapsible steel shutters with vertical, double
channel of 20 x10x2 mm of 100 mm centre ,Bracers with flat iron
40x40x6 mm with 38 mm dia steel pulleys, the top, bottom and
side vertical frames of the collapsible gate with 65x65mmx8mm
BMT- MS Angle and middle guide rail at site height with 65mmx8mm
158 1 Sqm 2,503.00 25.21
F.30 MS flat for the pulleys to guide and fixed with necessary hold
fasts, bolts, nuts, rivets, locking arrangements, stoppers, handles,
all accessories all fixtures and painted with one coat of approved
steel primer etc., complete for finished item of work as per
special spn 1105
9
Total
Buildings Embedded
(%)
Powder Coated Mild Steel Hallow single rebate door frames

manufactured using cold roll formed process steel sheet of 1.25
mm thick bright (Cold Rolled Close Annealed (CRCA) and profile
size of 105 x 60 mm conforming to IS 4351 - 2003 including pre-
treatment, Galvanized as per IS:277, zinc phosphating finished
with Thermosetting Polyurethane paint of Aliphatic Grade
BMT-
159 providing high levels of scratch resistance and durability/Epoxy 1 RM 696 16
F.31
polyester powder for powder coating paint thickness 60 – 65
microns(Dry film thickness)Stainless Steel Ball Bearing Butt
Hinges 3 mm thick fixed flush to the frame with Hinges, Base
Ties, Holdfast Lugs, Mortar Guards, shock absorbers and
provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for
both single and double shutter doors
Supply and Fixing Door Frames made of Skin pass galvanized
Iron Sheet ( conform to Base Steel as per IS 513 “D” Quality,
Galvanized as per IS 277 with Hot Zinc Coating of 120 grams/
Sq.mtr) with pure polyester powder coating of 60 - 65 Microns
(Dry Film thickness) manufactured from 1.2 mm thick
galvanized steel sheet formed to single rebate profile of size 100
BMT-
160 mm x 58 mm fitted with “TEE” anchors and supplied to knock 1 RM 787 16.08
F.32
down /welded form with Miter Joint for Bolted Assembly at site,
cleaned and coated with Polyurethane powder coating of
thickness 65 – 75 microns (Dry Film Thickness) & Oven Baked at
200 Degree Centigrade for Wood Grain finish, Stainless Steel Ball
Bearing Butt Hinges of 102 x 76 x 3mm thick fixed flush to the
frame
Supply and Fixing Door Frames made of Skin pass galvanized
Iron Sheet ( conform to Base Steel as per IS 513 “D” Quality,
Galvanized as per IS 277 with Hot Zinc Coating of 120 grams/
Sq.mtr) with pure polyester powder coating of 60 - 65 Microns
(Dry Film thickness) manufactured from 1.2 mm thick
galvanized steel sheet formed to double rebate profile of size 148
BMT-
161 mm x 58 mm fitted with “TEE” anchors and supplied to knock 1 RM 861 16.04
F.33
down /welded form with Miter Joint for Bolted Assembly at site,
cleaned and coated with Polyurethane powder coating of
thickness 65 – 75 microns (Dry Film Thickness) & Oven Baked at
200 Degree Centigrade for Wood Grain finish, Stainless Steel Ball
Bearing Butt Hinges of 102 x 76 x 3mm thick fixed flush to the
frame
G FIXTURES FOR DOORS & WINDOWS
BMT-
162 Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 172 28.36
G.01
BMT-
G.02
BMT-
G.03
BMT-
G.04
BMT-
G.05
BMT-
167 Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Long Each 75 29.31
G.06
BMT-
G.07
10
Total
Buildings Embedded
(%)
BMT-
G.08
BMT-
G.09
BMT-
G.10
BMT-
G.11
BMT-
G.12
BMT-
G.13
BMT- MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 100 mm
175 Each 25 31.58
G.14 Long
176 Each 37 27.59
G.15 Long
177 Each 54 28.57
G.16 Long
178 Each 73 28.07
G.17 Long
179 Each 90 28.57
G.18 Long
BMT-
180 Brass Butt hinges (IS:205)- 75 mm Long Each 71 29.09
G.19
BMT-
G.20
BMT-
G.21
BMT-
G.22
BMT-
184 Aluminium Butt hinges (IS:205)- 75 mm Long Each 108 28.57
G.23
BMT-
G.24
BMT-
G.25
BMT-
G.26
BMT-
188 MS-Powder Coated Butt hinges (IS:205)- 75 mm Long Each 12 33.33
G.27
BMT-
G.28
BMT-
G.29
BMT-
G.30
BMT-
192 Aluminium Door Handles (IS:208) 75 mm Long Each 73 28.07
G.31
BMT-
G.32
BMT-
G.33
BMT-
G.34
BMT-
196 MS-Powder Coated Door Handles (IS:208) 125 mm Long Each 33 26.92
G.35
11
Total
Buildings Embedded
(%)
BMT-
197 MS-Powder Coated Door Handles (IS:208) 150 mm Long Each 49 28.95
G.36
BMT-
198 Brass Aldrops (IS:2681) 300 mm long Each 1247 28.82
G.37
BMT-
199 Brass Aldrops (IS:2681) 350 mm long Each 2,401.00 28.81
G.38
BMT-
200 Brass Aldrops (IS:2681) 450 mm long Each 3,419.00 28.82
G.39
BMT-
201 Aluminium Aldrops (IS:2681) 200 mm long Each 319 28.63
G.40
BMT-
G.41
BMT-
G.42
BMT-
204 MS-Powder Coated Aldrops (IS:2681) 200 mm long Each 112 28.74
G.43
BMT-
G.44
BMT-
G.45
BMT-
207 Brass Door Stoppers Each 192 28.86
G.46
BMT-
208 Brass Windows Stay Each 217 29.17
G.47
BMT-
209 Aluminium Flat Latches: 200 mm long Each 154 28.33
G.48
BMT-
G.49
BMT-
G.50
BMT-
212 MS-Powder Coated Flat Latches: 250 mm long Each 56 30.23
G.51
BMT-
213 MS-Powder Coated Flat Latches: 300 mm long Each 71 29.09
G.52
BMT-
214 MS-Powder Coated - Door Stoppers Each 49 28.95
G.53
BMT- Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder coated
215 RM 124 25.25
G.54 with PVC rings
BMT-
216 Supply & fixing drapery bracket - brass powder coated pair 438 28.82
G.55
BMT-
217 Deluxe window stay Aluminium Each 140 28.44
G.56
BMT-
218 Heavy duty Aluminium Door stopper Each 61 29.79
G.57
BMT-
219 Brass fancy handles 150 mm Each 325 28.97
G.58
BMT-
G.59
BMT-
G.60
BMT-
G.61
BMT-
223 Brass fancy handles 450 mm Each 1,587.00 28.81
G.62
12
Total
Buildings Embedded
(%)
Providing and fixing Cast Iron Body Bottle Type Hydraulic Door
BMT-
224 Closer (IS: 3564) with double speed adjustment, with necessary Each 1005 25.16
G.63
accessories and screws etc. complete
BMT- Double action Stainless steel cover plate and cast body iron floor
225 Each 1,856.00 28.8
G.64 spring (IS 6315- Table-1)
BMT- Double action Brass cover plate and cast brass body floor spring
226 Each 4,404.00 28.81
G.65 (IS 6315- Table-1)
BMT- Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP
227 Each 908 28.79
G.66 handles complete set
BMT- Heavy duty mortise lock 6/7 levers (IS:2209) with brass heavy
228 Each 2,335.00 28.79
G.67 handles
BMT-
229 Brass latch heavy 300 mm Each 625 28.87
G.68
BMT-
G.69
BMT-
G.70
BMT-
232 Friction stay hinges for windows Each 104 28.4
G.71
BMT- Keyless lockset for toilet doors with CP or PC knob handles
233 Each 338 29.01
G.72 (complete set)
BMT-
234 Keyless lock set for toilet doors with brass knob handles Each 894 28.82
G.73
Providing and fixing Aluminium Extruded Section Body Tubular
BMT- Type Hydraulic Door Closer (IS: 3564) with double speed
235 Each 1,163.00 25.19
G.74 adjustment with necessary accessories and screws etc. complete
(Type-1: for width of doors up to 700 mm)
236 Each 1,245.00 25.25
(Type-2: for width of doors 701 to 850 mm)
237 Each 1,306.00 25.22
(Type-3: for width of doors 851 to 1000 mm)
Providing and fixing double action brass cast hydraulic floor
spring (IS:6315-Table 1) for doors including cost of cutting floors
BMT-
238 as required, embedding in floors and S.S./ Brass cover plates Each 3,678.00 25.19
G.77
with brass pivot and single piece M.S. Sheet outer box with slide
plate etc. complete (door weight capacity up to 130 kgs)
Providing and fixing double action brass cast hydraulic floor
spring (IS:6315-Table 1) for doors including cost of cutting floors
BMT-
239 as required, embedding in floors and S.S. cover plates with brass Each 2,734.00 25.18
G.78
pivot and single piece M.S. Sheet outer box with slide plate etc.
complete (door weight capacity up to 80 kgs)
Providing of brass cast body Floor Spring IS: 6315 sleek in size
with the S.S. / Brass Cover plates of Length 320 mm x Breadth
BMT-
240 130 mm size along with the Top Patch, Bottom Patch, Door Lock Each 12,149.00 28.81
G.79
and Pivot with Double Cylinder etc. complete for Heavy duty
Glass doors.
H WATER PROOFING CHEMICALS & ADMIXTURES
Literature for usage / application of construction / water
proofing materials, epoxies etc, may be obtained from
manufacturers.
13
Total
Buildings Embedded
(%)
BMT- Supply of cement based Impervious Water Proofing powder

241 1 kg 54 28.57
H.01 compound
Providing Tar felting roof repairs with Rainseal Felt/ Zori-felt BT
or equivalent duly applying one coat of appropriate grade of
bitumen in hot condition @ 0.2 Kg/1Sqm of roof area, fixing tar
BMT-
242 felt (Manufactures to IS 1322/1972 specification), applying 1 Sqm 244 25.13
H.02
second coat of appropriate grade of hot bitumen at 0.20
Kg/1Sqm of roof area and spreading course aggregate (sand) at
0.063 cum per 1 Sqm of roof area finished item
Providing waterproofing treatment by supplying and applying
Rainseal HDP 1500 /ROOFSHIELD-1500 OR ZORISHIELD-1500
equivalent (1.50 mm thickness, 2.25Kg per Sq. Mt and 20 X1 Mtr.
roll with a centre core of 90 micron thickness HMHDPE film)
Water Proofing Membrane. A) apply one coat of Bituminous
BMT-
243 Emulsion, first coat of bituminous grade 85/25, fix "Rainseal HDP 1 Sqm. 265 25
H.03
1500/ROOFSHIELD-1500 OR equivalent " water proofing
membrane, apply second coat of Bitumen grade 90/15 after
sealing all the joints and abutments with a Gas torch and apply
one coat of Rainseal SAP- BITUMINOUS ALUMINIUM PAINT for
heat resistance for finished item
Providing chemical waterproof treatment with Brick bat coba
& chemical cement mortars to exposed RCC roof slab surfaces
to required slopes mixed with Conproof NO.1/ Rain Proof No
1/Zoriproof (100 ml Per Bag of 50 Kgs Cement) waterproofing
chemical compound, laid over roof slab and brickbat coba
treatment in chemical cement mortar 100 mm thick at the
centre and 80 mm thick at the edges finished smooth with a
BMT- floating coat of chemical mixed cement mortar as per the
244 1 Sqm 870 25.18
H.04 manufacturer specification including cost and conveyance of
all materials like sand, chemical–Conproof NO.1/ Rain Proof No
1 Zoriproof (100 ml Per Bag of 50 Kgs Cement) waterproofing
compound, water etc., to site, including seigniorage charges
and operational, incidental, and labour charges for mixing
mortar, laying, lift charges, rendering smooth curing including
rounding off junctions of wall and slab etc., complete for
finished item of work (with a guarantee of 10 years)
Providing chemical waterproof treatment with Brick bat coba
& chemical cement mortars to exposed RCC roof slab surfaces
to required slopes mixed with – Conproof NO.1/ Rain Proof No
1/Zoriproof (100 ML Per Bag of 50 Kgs Cement) waterproofing
chemical compound, laid over roof slab and brickbat coba
treatment in chemical cement mortar 80 mm thick at the centre
and 60 mm thick at the edges finished smooth with a floating
BMT- coat of chemical mixed cement mortar as per the manufacturer
245 1 Sqm 723 25.3
H.05 specification including cost and conveyance of all materials
like sand, chemical –Conproof NO.1/ Rain Proof No 1/Zoriproof
(100 ml Per Bag of 50 Kgs Cement) waterproofing compound,
water etc., to site, including seigniorage charges and
operational, incidental, and labour charges for mixing mortar,
laying, lift charges, rendering smooth curing including rounding
off junctions of wall and slab etc., complete for finished item of
work (with a guarantee of 10 years)
14
Total
Buildings Embedded
(%)
Construction Chemicals, Epoxy & Admixtures - Chloride free

BMT- water reducing and plasticizing admixture : Consplax/ Conflow
246 1 litre 221 28.49
H.06 SNP1 Zoriplast (Dosage : 20 ml Per Bag of 50 Kgs Cement) or
equivalent
High strength Acrylic blended platicizer and Water reducing
BMT-
247 agent - Roofplast HS 100/ Conflow SNP20 or Zoriplast HS 1 litre 161 28.8
H.07
(Dosage : 400 ml to 500 ml Per Bag of 50 Kgs Cement)
Quick setting, rapid hardening and water proofing compound - :
BMT- Rapidstrong QS/Conflow SNPA or ZorirapidR or Equivalent
248 1 litre 80 29.03
H.08 (Dosage : 1 to 3 Litres per bag of 50 Kgs Cement depending on
the setting time required).
Chloride free super plasticizer for high range water reducing
BMT- admixture : Roofplast SP 35/Conflow SNS I or Zoriplast SP 350
249 Litre 80 29.03
H.09 (Dosage: 200 ml to 500 ml per bag of 50 Kgs Cement) or
equivalent.
Chloride free super plasticizer for high early strength and high
BMT- range water reducing admixture: Roofplast SP 45/Conflow SNS 2
250 Litre 80 29.03
H.10 or Zoriplast SP 450 (Dosage: 200 ml to 500 ml per bag of 50 Kgs
Cement) or equivalent.
Set accelerator and plasticizer: Roofplast SCA/ Conflow SNA or
BMT-
251 Zoriset or Equivalent (Dosage:1 Kg to 3 Kgs per bag of 50 Kgs Kgs 75 29.31
H.11
Cement depending on the setting time required )
Chloride free High power slump retaining and retarding
BMT-
252 plasticizer: Roofplast RT5/Conflow SNR or Zoriplast RT5 Litre 150 29.31
H.12
(Dosage: 15ml to 40 ml per bag of 50 Kgs Cement) or Equivalent.
Air Entraining Agent: Roofplast AEA/ Conflow SNE or Zoriplast

BMT-
253 AEA (Dosage : 5ml to 25 ml per bag of 50 Kgs Cement) or Litre 139 28.7
H.13
Equivalent (Dosage : 15ml per Bag of 50 Kgs Cement)
Chloride free super plasticizer, high range water reducing and
BMT- retarding admixture - Roofplast SR5/Conflow SNS-3 SPL or
254 Litre 94 28.77
H.14 Zoriplast SRT5 (Dosage : 300 ml to 400 ml per bag of 50 Kgs
Cement) or equivalent
Retarding super plasticizer: Conflow SNS-3 or Accelerating
BMT-
255 Plasticizers: Roofplast SA/ Zoriplast AC (Dosage: 500 ml to 1 Litre 77 28.33
H.15
Litre per bag of 50 Kgs Cement) or Equivalent.
Waterproof Cement Mortar Plasticizer: Roofpalst MP/ Morflow
BMT-
256 SN 1 or Zoriplast MP (Dosage: 100 ml per bag of 50 Kgs Cement) Litre 200 29.03
H.16
or Equivalent.
Integral Cement Waterproofing Compound : Conproof No.1/
BMT-
257 Rainproof No.1/Conflow SNW1 or Zoriproof (Liquid Form) Litre 210 28.83
H.17
(Dosage : 100 ml Per Bag of 50 Kgs Cement)
Integral Cement Waterproofing Compound: Conproof No.1/
BMT-
258 Rainproof No.1/Conflow SNW2 or Zoriproof (Powder Form) Kg 32 28
H.18
(Dosage: 500 Grams per bag of 50 Kgs Cement) or Equivalent.
High plasticizing cement waterproofing liquid based on
BMT- naphthalene formaldehyde: Conproof LW 200/ Rainproof LW
259 Litre 96 28
H.19 SPL/Conflow SNW2 - 750 Grams or Zorishield 200 or Equivalent.
(Dosage:200 ml per Bag of 50 Kgs Cement)
BMT- Block Admixture: Roofplast BA/ Conflow SNB or Zoriplast BA
260 Litre 145 28.32
H.20 (Dosage: 20 ml to 25ml per bag of 50 Kgs Cement) or Equivalent.
15
Total
Buildings Embedded
(%)
Sprayed Concrete Accelerator: Shotset SN1 or Roofplast SA/

BMT-
261 Zoriset SCA or Equivalent (Dosage: 500 ml – 2.5 Litres/bag of Kg 73 28.07
H.21
Cement).
Surface treatment water Based high power curing compounds:
BMT-
262 Curaid SN1 or Roofexcure WB/Zoricure WB (Coverage: 5-6 Sq. Litre 100 28.21
H.22
Mtrs / Litre / Coat) or Equivalent.
Concrete wax based pigmented curing compound: Curaid SN2 or
BMT-
263 Roofexcure WX/ Zoricure SB or Equivalent. (Coverage : 4-5 Sq. Litre 200 29.03
H.23
Mtrs / Litre / Coat )
Formwork & Mould Treatment: Roofcare MRA/ Shutterol SNU or
BMT-
264 Zorislip or Equivalent. (Coverage: 1 Litre Zorislip will cover Litre 145 28.32
H.24
approx 20 to 30 m2 on method and material of the form )
BMT- Cleaning and acid etching agents: Tilex Kleen AC/ Uniklen SN1 or
265 Litre 75 29.31
H.25 Zorikleen AC or Equivalent.
BMT- Ready to use universal degreasing and cleaning agents: Tilex
266 Litre 80 29.03
H.26 Kleen DA/ Uniklen SN2 or Zorikleen DA or Equivalent.
BMT- Liquid Cleaning Agent: Tilex Kleen LC/ Uniklen SN3 or Zorikleen
267 Litre 129 29
H.27 LC or Equivalent.
Non-shrink Free flow high strength injection grout: Rapidstrong
BMT-
268 Grout GP2/ Expacrete SN50 or Zorigrout GP 2 or Equivalent. Kg 34 30.77
H.28
(Yield 13.5 Litres Per 25 Kgs Bag).
BMT- Non-shrink Free flow grout: Rapidstrong Grout GP3/Expacrete
269 Kg 36 28.57
H.29 SN70 or Zorigrout GP 3
BMT- Non-shrink Free flow grout: Rapidstrong Grout GP4/ Expacrete
270 Kg 39 30
H.30 SN90 or Zorigrout GP 4
High strength cementitious non-shrink Free flow grout:
BMT-
271 Rapidstrong Grout Admix/ Expacem SN2 or Zorigrout GP 1 or 1 Kg pack 35 29.63
H.31
Equivalent. (250 Grams per Bag of 50 Kgs Cement).
Low viscosity Epoxy resin injection grout (Two parts)
BMT-
272 :Rapidstrong Grout EP/Expacrete SNE 1 or Zorigrout EP or Kg 798 28.71
H.32
Equivalent.(Density 1.07 Kg Per Litre )
BMT- Epoxy Resin Grouts: Rapidstrong Grout EP3/ Expacrete SNE 3 or
273 Kg 169 29.01
H.33 Zorigrout EP 3 or Equivalent.
High Power Polyester Resin Anchor Grout: Rapidstrong Grout
BMT-
274 AG/Anchoret SN1 or Zorifix or Equivalent. (Yield 0.5 Litres / 1 Kg 271 29.05
H.34
Kg Pack )
High strength, high polyester resin grouts – Rapidstrong AG
BMT-
275 Pride/Anchoret SN2 or Zorifix XL or Equivalent. ( Yield 0.5 Kg 503 28.97
H.35
Litres / 1 Kg Pack )
Non-metallic Floor Hardeners: Rapidstrong NH/Flortop SNC or
Zorifloor DH or Equivalent. (Coverage: May be applied at rate 3.5
BMT-
276 Kgs /m2 over green concrete for normal traffic & 6-12 Kg / M2 Kg 37 27.59
H.36
for heavy traffic. Higher application rates yield better
abrasion resistance)
BMT- None oxidizing, heavy duty metallic Floor Hardeners:
277 Kg 30 30.43
H.37 Rapidstrong FM/ Flortop SNS or Zorifloor NH or Equivalent.
Epoxy Floor coating: Procoat SNF or Food neutral Epoxy
BMT-
278 waterproof / damp proof coating: Roofcare EP/ Zoricoat EP or Kg 526 28.92
H.38
Equivalent. (Coverage : 70 to 80 SFT / Per Litre / coat)
Polysulphide modified epoxy coatings: Procoat SNS or Roofcare
BMT-
279 EPS/Zoricoat EPS or Equivalent (Coverage : 250 to 300 Grams / Kg 527 28.85
H.39
M2 and forms a DFT of 175 to 200 Micron)
BMT- Essen putty SNE or Epoxy putty - Roofcrete Putty EP/ Zoriputty
280 Kg 311 29.05
H.40 EP or Equivalent
16
Total
Buildings Embedded
(%)
Zincrich epoxy resin primer - Roofguard ZP/Procoat SNZ or

BMT-
281 Zoriguard ZP or Equivalent (Coverage : 4-5 Sq.Mtr. /Litre / Kg 458 28.65
H.41
Coat)
Chemical resistance, fungus resistance water based
BMT- polyurethane sterile coating : Roofcare PU/ Procoat SNL or
282 Pack 803 28.89
H.42 Zoristerile or Equivalent ( Coverage : 60 to 65 SFT / 2 Coats /
Litre)
Solvent free chemical resistant Epoxy self levelling (for food and
BMT- pharmaceutical industry) Flooring system: Armstrong FL-
283 Kg 314 28.69
H.43 SL/Flortop SNSL or Zorifloor SL or Equivalent. ( 8.25 to 0.30 M2 /
Kg mix with 2mm thickness )
Self levelling self smoothing water based epoxy floor topping :
BMT- Armstrong FL-SLW/Flortop SNSL-SPL or ZORIFLOOR SLW - 1.5-
284 Kg 318 28.74
H.44 3mm or Equivalent (Coverage : 4.5m2 / 17 Kg Pack @ 2mm
thickness depending on the substrate)
High build heavy duty epoxy resin floor coating: Armstrong HBF/
BMT-
285 Flortop SNM or Zorifloor HB or Equivalent. (Coverage : Base coat Kg 336 28.74
H.45
10- 12 m2/ 5 Kg @ 250 microns DFT )
BMT- Epoxy based repair mortar / concrete: Roofcrete EP/ Flortop
286 Litre 426 28.7
H.46 SNFM or Zoricrete EP or Equivalent.
Solvent free Epoxy resin primer for floor coatings: Florcoat SNP
BMT-
287 or Roofbond EP Primer/ Zoriprime EP or Equivalent. (Coverage: Pack 509 28.86
H.47
3 Kg unit covers about 13m2 for DFT of about 120 micron.)
Solvent free epoxy resin primer for protective coatings –
BMT- Procoat SNC or Roofbond EPF Primer/ Zoriprime EPF or
288 Pack 530 28.95
H.48 Equivalent (Coverage : 3 Kg unit covers about 13m2 for DFT of
about 120 micron.)
Epoxy Primer for floor coatings and protective coatings -
BMT-
289 Procoat SNP or Roofbond EFC Primer/ Zoriprime EFC or Pack 589 28.88
H.49
Equivalent.
BMT- Epoxy primer for Hibond floor & protective coatings : Procoat
290 Pack 777 28.86
H.50 SNP2 or Roofbond EFC2 Primer/ Zoriprime EFC 2
BMT- Cementitious Micro concrete Repair products: Repcrete SNC or
291 Kg 36 28.57
H.51 Roofcrete MC/Zoricrete MC or Equivalent.
BMT- Repair Products:Repcrete SNE1 or Epoxy mortar - Roofcrete
292 Kg 536 28.85
H.52 EP/Zoricrete EPM or Equivalent
BMT- Under water epoxy resin system for repair products: Repcrete
293 Kg 940 28.77
H.53 SNW or Roofcrete EUW/Zoricrete EUW or Equivalent.
BMT- Under water epoxy resin system mortar – Repcrete SNW Mortar
294 Kg 910 28.9
H.54 or Roofcrete EUW/Zoricrete EMU
Fast setting cement based plugging compound - Uniplug SN or
BMT-
295 Wonderseal Plug/Zoriplug or Equivalent ( Powder Form : mix Kg 86 28.36
H.55
with water direct application )
High durable cementitious acrylic based two pack Waterproofing
BMT-
296 systems: Aqua coat SNF or Roofbond RFX/Zoricoat RX or Kg 134 28.85
H.56
Equivalent. (12 – 14 m2 in two coats to achieve 1mm thickness )
Water Repellents: Aquarepel SN1 or Water based silicon water
BMT-
297 repellent, Nano technology - Rain care WR/ Zoripel WB or Litre 723 28.88
H.57
Equivalent
BMT- Tile Adhesives: Tilegrip SNU or Tilex/ Zorimix or Equivalent.
298 Kg 18 28.57
H.58 (At 3mm thickness 7-9 Sqm / 25 Kgs )
17
Total
Buildings Embedded
(%)
Acrylic based Bonding Adhesives: Conbond SNA or Roofbond PB/

BMT-
299 Zoribond PB or Equivalent. (Mix: 1:1 ratio of cement 50 SFT / Litre 150 29.31
H.59
Litre /coat depending on the substrate)
Epoxy based Bonding adhesive: Conbond SNE or Roofbond
BMT-
300 EP/Zoribond EP or Equivalent. (Coverage : 20 – 25 SFT / Kg Pack 884 28.86
H.60
/Coat)
Supply of anti-corrosion admixture inhibitor liquid as per
Central Electro Chemical Research Institute developed
BMT-
301 specification of Concare or Concare Plus or Roofplax SP 300/ Litre 315 28.57
H.61
Zoriplast AC Equivalent (200 ml to 500 ml per Bag of 50 Kgs
Cement)
BMT- HI-BOND: Concrete Plasticizers: HI-PLAST 01 or Roofbond High
302 Litre 161 28.8
H.62 plast ( Dosage : 100 ml Per Bag of 50 Kgs Cement)
BMT- Concrete Plasticizers: HI-PLAST 02 or Roofbond High plast – 2
303 Litre 107 28.92
H.63 (Dosage : 200 ml per bag of 50 Kgs Cement)
BMT-
304 Concrete Plasticizers: HI-PLAST PA or Roofbond AC Litre 109 28.24
H.64
BMT-
305 Super Plasticizers: HI-PLAST SP or Roofbond SP 30 Litre 88 29.41
H.65
BMT-
306 Super Plasticizers: HI-PLAST SP AR or Roofbond SP 40 Litre 109 28.24
H.66
Accelerating Plasticizers: HI-PLAST AR or Concrete plasticizing,
BMT- water reducing and accelerating admixture - Roofbond PA
307 Litre 88 29.41
H.67 (Dosage: 500 ml to 1000 ml Per Bag of 50 Kgs Cement) or
Equivalent.
BMT-
308 Retarding Plasticizers: HI-PLAST RT or Roofbond RT 30 Litre 86 28.36
H.68
BMT-
309 Air Entraining Agents: HI-PLAST A.E or Roofbond AEA Litre 161 28.8
H.69
BMT- Retarding Super Plasticizers: HI-PLAST SP RT or Roofbond SR
310 Litre 107 28.92
H.70 30
BMT-
311 HI-PLAST RSP or Roofbond SR 40 or Equivalent. Litre 118 28.26
H.71
BMT- Mortar Plasticizers: HI-PLAST MP or Roofbond MP ( Dosage :
312 Litre 171 28.57
H.72 100 ml Per Bag of 50 Kgs Cement)
Integral Water Proofing compounds: HI-PROOF (L) or Liquid
BMT- Concentrated Micronized Cement Waterproofing Compound:
313 Litre 96 28
H.73 Roofguard 500/Roofbond 500 (Dosage: 500 ml per bag of 50
Kgs Cement) or Equivalent.
BMT- HI-PROOF (P) or Conproof P/Roofbond - P or Equivalent
314 Kg 27 28.57
H.74 (Dosage: 1 Kg Per Bag of 50 Kgs Cement).
BMT-
315 or Roofbond 750 or Equivalent Litre 75 29.31
H.75
BMT- Block Admixtures: HI-ADMIX or Roofbond BA or Equivalent (
316 Litre 24 26.32
H.76 Dosage : 20 ml Per bag of 50 Kgs Cement)
Sprayed Concrete Accelerators: HI-ACCEL or Roofbond SA or
BMT-
317 Equivalent. ( Dosage : 50 Grams to 1 Kg Per Bag of 50 Kgs Kg 64 28
H.77
Cement)
BMT- Surface Treatments curing compounds: HI-CURE 01 or Roofex
318 Litre 509 28.86
H.78 WB /Roofcoat/ Zoricoat
BMT- Surface Treatments Polyurethane curing compounds: HI-CURE
319 Litre 321 28.92
H.79 02 or Roofex WXB/ Roofcare PU/ Zoricoat PU
BMT- Surface Treatments Crystalline Repair Products: HI-CRM or
320 Kg 34 30.77
H.80 Roofex GP2 or Zoripex Equivalent
BMT- Polyurethane Sealant - Roof seal PU/ Zoriseal PUHI-CRM EX or
321 Kg 736 28.9
H.81 Roofex EC or Equivalent
18
Total
Buildings Embedded
(%)
BMT- Polyurethane Sealant - Roof seal PS/ Zoriseal PS/HI-CRM EXW

322 Kg 669 28.9
H.82 or Roofex EW or Equivalent.
HI-CRM EX M or Structural graded polymer modified
BMT-
323 reinstatement concrete / mortar – Roofcrete AR/ Zoricrete CMG Kg 84 29.23
H.83
or Equivalent
Water Proofing: HI-SHIELD or Liquid applied single component,
elastomeric waterproofing membrane coating with -Rain seal/
BMT- Zoricoat XL or Equivalent. (Coverage : 50 to 60 SFT Per Litre /
324 Litre 375 28.87
H.84 Coat ) ( for brush / spray application add 20% water per Litre )
As a primer coat application dilute with water @ of 1: 1 ratio
recommended.
Water Repellents: HI-REPEL or Solvent based silicon water
BMT-
325 repellent compound - Roofcare WR/Zoripel SB or Equivalent. Litre 348 28.89
H.85
(Direct application )
Tile Adhesives: HI-ADHESIVE or High strength tile adhesive (tile
BMT-
326 on tile): Tilex Grout Hi- Grip/ Zorimix Hi-Grip or Equivalent. ( At Kg 24 26.32
H.86
3mm thickness 7-9 Sqm / 25 Kgs )
Supply of Concare-XL Anti Corrosion and leak proof Crack Proof
BMT-
327 ,Water Proof ,Concrete Hardener Admixture liquid Dosage (200 Litre 295 28.82
H.87
ml to 250 ml per Bag of Cement
BMT- HI-FIX HFE or Epoxy tile mortar - Tilex EH/ Zorimix EH or
328 Pack 139 28.7
H.88 Equivalent
HI-BOND Wall Putty Normal or Grey cement based Gypsum
BMT-
329 Plaster – Wall strong GP/Zoritek GP or Equivalent (Coverage : 35 Kg 14 27.27
H.89
to 40 SFT per bag of 40 Kgs Pack)
HI-BOND Wall Putty Fine or Portland cement based plaster
BMT-
330 finish surface for interior – Wall strong PC/ Zoritek PC or Kg 15 25
H.90
Equivalent.
HI-BOND Wall Putty Super Fine or Acrylic based ready to use
BMT- surface (white / off white) -Wall strong WC/ Zoritek WC or
331 Kg 16 33.33
H.91 Equivalent. (At 1.5 to 2mm thickness 100 - 125 SFT Per Bag of
25 Kgs Pack )
HI-BOND Wall Putty Super Fine (Water Resistant) or Smooth
BMT-
332 crack free, water resistant finish plaster Wall strong WP/ Kg 42 27.27
H.92
Zoritek WP or Equivalent
POLY-SULPHIDE, BITUMINOUS HOT SEALING COMPOUND:
BMT-
333 Grade 'A' I.S.I excluding ST or Rainseal BS/ Zoriseal BS Grade ‘A’ 1 Kg 96 18.52
H.93
or Equivalent
BMT- Bitumen solution primer of approved quality: Rainseal BT
334 1 Kg 86 17.81
H.94 primer/ Zoriprime BT or Equivalent.
BMT- Tarfelt Rainseal Felt/ Zorifelt BT Type : 2 Grade : 1 or
335 1 sqm 129 18.35
H.95 Equivalent
Supply and application of Liquid admixture for concrete with
BMT-
336 high resistance against water ingress and having surface active 1 Litre 99 25.32
H.96
agents & refined lignosulphonate Rheomac 707 of BASF
Supply and application of two component acrylic modified
BMT- cementitious system for forming coating to waterproof and
337 1 Kg 74 25.42
H.97 resurface concrete, masonry and other construction materials
waterproof and flexible coating MASTERSEAL 550 GREY of BASF
Supply and application of Elastomeric flexible two component

polymers modified cementitious system for forming waterproof
BMT-
338 coating on concrete, masonry & other construction material up to 1 Kg 88 25.71
H.98
2mm thick MS550 EL membrane and reinforced with 100%
virgin polypropylene woven fabric MASTERSEAL 550 EL of BASF
19
Total
Buildings Embedded
(%)
Supply and application of grey cementitious powder polymer

BMT- additive and cement-based adhesive for fixing ceramic &
339 1 Kg 22 22.22
H.99 vitrified wall and floor tiles, quarry tiles and similar materials
MASTERTILE 25 of BASF
Supply and application of premixed, non-metallic, ready to use
powder, designed for application as a dry shake over freshly
BMT-
340 floated concrete floors or floor screeds to obtain a monolithic 1 Kg 22 22.22
H.100
floor with enhanced abrasion resistance MASTERTOP 100
(GREY) of BASF
BMT- Supply and application of synthetic polymers to impart
341 1 Kg 67 24.07
H.101 rheoplastic qualities to concrete RHEOBUILD 920 (SH) of BASF
Supply of Concare-Plus Admixture Anti Corrosion and leak proof
BMT-
342 Weather Proof, Concrete Hardener Admixture. Dosage (200 ml to 1 Litre 268 28.85
H.102
250 ml per Bag of Cement )
BMT- Supply of Concare-LP polymer based, leak proof, Admixture
343 1 Litre 193 28.67
H.103 liquid, dosage (250 ml to 300 ml per Bag of Cement )
Supply Con- life –Water Proof, Leak Proof, Concrete Hardener,
BMT-
344 Rust Proof, Admixture Liquid Dosage (200 ml to 250 ml per Bag 1 Litre 289 29.02
H.104
of Cement )
Supply of Contech – 2000 bio Product (Powder) Anti Corrosion
leak proof, Crack Proof, Chemical Resistant, whether proof,
BMT- inhibitor liquid. Dosage (5 to 10% of cement weight Cement )
345 1 Kg 311 29.05
H.105 and 15% in serve environmental Condition like marine
structures / coastal structures and chemical structures,
Godowns, effect
Supply of Con – Cura Self Curing Agent Admixture for Concrete.
BMT-
346 Dosage (100 ml – 250ml per bag (50kgs) of cement depending on 1 Litre 1,285.00 28.76
H.106
the atmospheric temperature and humidity)
Supply of Con – Grout Epoxy Pourable Crack / Gap Filling Grout
BMT-
347 System. Dosage (Varies with climate, Site / Substrate Status. 1 Kg 3,535.00 28.83
H.107
Average density is 1.20 Kg / Ltr (System)
Supply of Con Mix – XL Liquid super Plasticizer And
BMT- Waterproofing With Anti Corrosive properties. Dosage (100 Ml –
348 1 Litre 482 28.88
H.108 1ltr Per bag (50Kg)of Cement) Dosage Should be finalized after
initial site trials
I GLASS
BMT-
349 Plain Float Glass 4 mm thick 1 sqm 441 28.95
I.01
BMT-
350 Plain Float Glass 5 mm thick 1 sqm 558 28.87
I.02
BMT-
351 Plain Float Glass 6 mm thick 1 Sqm 693 28.81
I.03
BMT-
I.04
BMT-
I.05
BMT-
I.06
BMT-
355 Tinted - Bronze/ Green Glass 4 mm thick 1 sqm 515 28.75
I.07
BMT-
356 Tinted - Bronze/ Green Glass 5 mm thick 1 sqm 644 28.8
I.08
BMT-
357 Tinted - Bronze/ Green Glass 6 mm thick 1 Sqm 772 28.88
I.09
20
Total
Buildings Embedded
(%)
BMT-
I.10
BMT-
I.11
BMT-
I.12
BMT-
361 Pin headed Glass 4 mm thick 1 sqm 331 28.79
I.13
BMT-
362 Pin headed Glass 5 mm thick 1 sqm 430 28.74
I.14
BMT-
363 Frosted / Ground Glass 4 mm thick 1 sqm 594 28.85
I.15
BMT-
364 Frosted / Ground Glass 5 mm thick 1 sqm 747 28.79
I.16
BMT-
365 Toughened Plain Glass 5 mm (including Glass) 1 sqm 895 28.78
I.17
BMT-
I.18
BMT-
I.19
BMT-
I.20
BMT-
I.21
J PAINTS & POLISHES
BMT-
370 Supply of water based Cement Primer of Interior Grade- 1 1 Kg 144 28.57
J.01
BMT-
371 Supply of water based Cement Primer of Exterior Grade- 2 1 Kg 86 28.36
J.02
BMT-
372 Supply of Red Oxide Primer Paint for iron works of Grade -1 1 Litre 130 28.71
J.03
BMT- Supply of Zinc Chromate Yellow Oxide Primer paint for iron
373 1 Litre 187 28.97
J.04 works
BMT-
374 Supply of Wood Primer 1 Litre 145 28.32
J.05
BMT-
375 Supply of Metal paste (Putty) for steel works 1 Kg 145 28.32
J.06
BMT-
376 Supply of Putty for wood work 1 Kg 145 28.32
J.07
BMT-
377 Supply of White Lead 1 Kg 104 28.4
J.08
BMT-
378 Supply of Synthetic clear Varnish 1 Litre 145 28.32
J.09
BMT-
379 Supply of Spirit 1 Litre 102 29.11
J.10
BMT-
380 Supply of Linseed Oil 1 Litre 58 28.89
J.11
BMT-
381 Supply of thinner for melamine polish/ French polish 1 Litre 134 28.85
J.12
BMT-
382 Supply of thinner for Polyurethane polish 1 Litre 274 28.64
J.13
BMT-
383 Supply of French Polish 1 Litre 190 28.38
J.14
BMT-
384 Supply of readymade Wax Polish 1 Kg 578 28.73
J.15
21
Total
Buildings Embedded
(%)
BMT-
385 Supply of Melamine Polish 1 Litre 320 29.03
J.16
BMT-
386 Supply of Interior Grade Polyurethane Polish 1 Litre 651 28.91
J.17
BMT-
387 Supply of Exterior Grade Polyurethane Polish 1 Litre 796 28.8
J.18
BMT-
388 Supply of wood adhesive compound 1 Kg 226 29.14
J.19
BMT-
389 Supply of Dry Powder Distemper 1 Kg 43 30.3
J.20
Supply of acrylic based Oil Bound washable Distemper having
BMT-
390 VOC (Volatile Organic Compound ) content less than 50 grams/ 1 Kg 87 27.94
J.21
litre
BMT- Supply of synthetic polymer plastic emulsion paint having VOC
391 1 Litre 261 28.57
J.22 (Volatile Organic Compound) content less than 50 grams/ litre.
Supply of synthetic polymer luxury plastic emulsion paint of
BMT-
392 superior grade having VOC (Volatile Organic Compound) content 1 Litre 434 28.78
J.23
less than 50 grams/ litre.
BMT-
393 Supply of Water proof Cement paint 1 Kg 50 28.21
J.24
BMT- Supply of acrylic exterior emulsion paint having VOC (Volatile
394 1 Litre 196 28.95
J.25 Organic Compound) content less than 50 grams/ litre.
BMT-
395 Supply of water proof Cement paint pack 25 Kg 1,185.00 28.8
J.26
BMT-
396 Supply of paint grade white lime for wash 25 Kg 552 18.2
J.27
BMT-
397 Supply of anti-corrosive grade - 1 bitumen paint of black colour 1 Litre 522 28.89
J.28
BMT-
398 Supply of grade-1 aluminium paint 1 Litre 261 28.57
J.29
Supply of ready mixed Synthetic Enamel paints in all shades
BMT-
399 Grade - I having VOC (Volatile Organic Compound) content less 1 Litre 253 29.08
J.30
than 50 grams/ litre.
Supply of ready mixed Synthetic Enamel paints in all shades
BMT-
400 Grade - II having VOC (Volatile Organic Compound) content less 1 Litre 193 28.67
J.31
than 50 grams/ litre.
BMT-
401 Deleted
J.32
BMT-
402 Deleted
J.33
BMT-
403 Deleted
J.34
BMT-
404 Deleted
J.35
BMT-
405 Deleted
J.36
BMT-
406 Deleted
J.37
BMT-
407 Deleted
J.38
BMT-
408 Deleted
J.39
BMT- Supply of wall putty of White Cement or Polymer or Cement
409 20 Kg 696 28.89
J.40 based
22
Total
Buildings Embedded
(%)
BMT- Altek / PMCC or Equivalent top coat high UV resistant

410 25 Kg 1,568.00 28.84
J.41 exterior paint
BMT-
411 Altek / PMCC / Deco orient base or Equivalent exterior Texture. 25 Kg 676 28.76
J.42
BMT-
412 Altek / PMCC or Equivalent Gold line Exterior Texture 25 Kg 1,191.00 28.76
J.43
BMT-
413 Deleted 1 Sqm Deleted
J.44
BMT-
J.45
BMT-
J.46
BMT-
J.47
BMT-
J.48
BMT-
J.49
BMT-
J.50
BMT-
J.51
K PARTICLE BOARDS
BMT-
421 Plain Particle Board: Interior Grade - 6 mm thick 1 Sqm 260 28.71
K.01
BMT-
K.02
BMT-
K.03
BMT-
K.04
BMT-
K.05
BMT-
426 Plain Particle Board: Interior Grade - 21.4 mm thick 1 Sqm 476 28.65
K.06
BMT-
K.07
BMT-
K.08
BMT-
429 Plain Particle Board: Exterior Grade- 8 mm thick 1 Sqm 327 28.74
K.09
BMT-
430 Plain Particle Board: Exterior Grade-12 mm thick 1 Sqm 363 28.72
K.10
BMT-
K.11
BMT-
432 Plain Particle Board: Exterior Grade-21.4 mm thick 1 Sqm 558 28.87
K.12
BMT-
K.13
BMT-
K.14
BMT-
435 Melamine faced Single Deco PPB- 8 mm thick 1 Sqm 676 28.76
K.15
BMT-
K.16
23
Total
Buildings Embedded
(%)
BMT-
K.17
BMT-
K.18
BMT-
439 Melamine faced Single Deco PPB- 35 mm thick 1 Sqm 1,675.00 28.85
K.19
BMT-
440 Melamine faced Twin Deco PPB- 8 mm thick 1 Sqm 778 28.81
K.20
BMT-
441 Melamine faced Twin Deco PPB- 12 mm thick 1 Sqm 889 28.84
K.21
BMT-
442 Melamine faced Twin Deco PPB-18 mm thick 1 Sqm 1028 28.82
K.22
BMT-
443 Melamine faced Twin Deco PPB-25 mm thick 1 Sqm 1,139.00 28.85
K.23
BMT-
444 Melamine faced Twin Deco PPB-35 mm thick 1 Sqm 2,140.00 28.84
K.24
BMT-
445 Natural Colour-Insulating Board - 12 mm thick 1 Sqm 252 28.57
K.25
BMT-
K.26
BMT-
K.27
BMT-
448 White Insulating Board - 12 mm thick 1 Sqm 307 28.99
K.28
BMT-
K.29
BMT-
K.30
BMT- Extra for veneered particle Board with commercial veneering on
451 1 Sqm 150 29.31
K.31 both sides.
BMT- Extra for veneered particle Board with Veneering on both sides
452 1 Sqm 315 28.57
K.32 with one side teak veneered and other side commercial veneered
BMT- Extra for veneered particle Board with Teak veneering on both
453 1 Sqm 494 28.65
K.33 sides
BMT-
454 Medium Fibre Board: Interior Grade - 6 mm thick 1 Sqm 411 28.84
K.34
BMT-
K.35
BMT-
K.36
BMT-
K.37
BMT-
K.38
BMT-
459 Medium Fibre Board: Interior Grade - 25 mm thick 1 Sqm 1,257.00 28.79
K.39
BMT-
K.40
BMT-
K.41
BMT-
462 Medium Fibre Board: Exterior Grade - 6 mm thick 1 Sqm. 559 28.8
K.42
BMT-
K.43
24
Total
Buildings Embedded
(%)
BMT-
K.44
BMT-
465 Medium Fibre Board: Exterior Grade - 15 mm thick 1 Sqm. 1,083.00 28.78
K.45
BMT-
K.46
BMT-
K.47
BMT-
K.48
BMT-
K.49
BMT-
470 MDF Board: Plain-Interior - 9 mm thick 1 Sqm 377 28.67
K.50
BMT-
K.51
BMT-
K.52
BMT-
K.53
BMT-
K.54
BMT-
475 MDF Board: Plain-Interior - 35 mm thick 1 Sqm 1,147.00 28.88
K.55
BMT-
476 MDF Board: Plain-Exterior - 9 mm thick 1 Sqm 493 28.72
K.56
BMT-
K.57
BMT-
K.58
BMT-
K.59
BMT-
480 MDF Board: Plain-Exterior - 30 mm thick 1 Sqm 1,147.00 28.88
K.60
BMT-
481 MDF Board: Plain-Exterior - 35 mm thick 1 Sqm 1,323.00 28.82
K.61
BMT-
482 MDF Board: Interior-One Side Laminated -9 mm thick 1 Sqm 591 28.76
K.62
BMT-
K.63
BMT-
K.64
BMT-
K.65
BMT-
486 MDF Board: Interior-One Side Laminated -30 mm thick 1 Sqm 1,262.00 28.78
K.66
BMT-
487 MDF Board: Interior-One Side Laminated -35 mm thick 1 Sqm 1,346.00 28.8
K.67
BMT-
488 MDF Board: Exterior-One Side Laminated -9 mm thick 1 Sqm 679 28.84
K.68
BMT-
K.69
BMT-
K.70
BMT-
K.71
25
Total
Buildings Embedded
(%)
BMT-
492 MDF Board: Exterior-One Side Laminated -30 mm thick 1 Sqm 1,346.00 28.8
K.72
BMT-
493 MDF Board: Exterior-One Side Laminated -35 mm thick 1 Sqm 1,430.00 28.83
K.73
BMT-
494 MDF Board: Interior-Both Side Laminated -9 mm thick 1 Sqm 675 28.82
K.74
BMT-
K.75
BMT-
K.76
BMT-
497 MDF Board: Interior-Both Side Laminated -25 mm thick 1 Sqm 1,097.00 28.76
K.77
BMT-
K.78
BMT-
K.79
BMT-
500 MDF Board: exterior-Both Side Laminated -9 mm thick 1 Sqm 762 28.72
K.80
BMT-
K.81
BMT-
K.82
BMT-
503 MDF Board: exterior-Both Side Laminated -25 mm thick 1 Sqm 1,116.00 28.87
K.83
BMT-
K.84
BMT-
K.85
BMT- CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276-
506 1 sqm 225 28.57
K.86 6 mm thick
507 1 sqm 273 28.77
K.87 8 mm thick
508 1 sqm 343 28.95
K.88 10 mm thick
509 1 sqm 420 28.83
K.89 12 mm thick
510 1 sqm 553 28.9
K.90 16 mm thick
511 1 sqm 691 28.92
K.91 20 mm thick
512 1 sqm 865 28.72
K.92 25 mm thick
513 1 sqm 1034 28.77
K.93 30 mm thick
514 1 sqm 1,382.00 28.8
K.94 40 mm thick
BMT- PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD-6 mm
515 1 sqm 579 28.95
K.95 thick
BMT- PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD-8 mm
516 1 sqm 626 28.81
K.96 thick
BMT- PRE LAMINATEDCEMENT BONDEDPARTICLE BOARD- 10 mm
517 1 sqm 672 28.74
K.97 thick
518 1 sqm 735 28.72
K.98 thick
519 1 sqm 817 28.86
K.99 thick
26
Total
Buildings Embedded
(%)
BMT- BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra

520 1 sqm 228 28.81
K.100 3. Murk Standard size 8’X4’ 10’X4’- 6mm thick
521 1 sqm 417 28.7
522 1 sqm 373 28.62
523 1 sqm 446 28.9
524 1 sqm 588 28.95
BMT-
525 V-Board-Cement Bonded Board - 4mm Thick 1 Sqm 159 29.27
K.105
BMT-
K.106
BMT-
K.107
BMT-
K.108
BMT-
K.109
BMT-
K.110
BMT-
K.111
BMT-
K.112
BMT-
K.113
BMT-
534 Laminate Sheets - Glossy Finish: 1.00 mm thick 1 Sqm 403 28.75
K.114
BMT-
K.115
BMT-
K.116
BMT-
537 Laminate Sheets - Mat Finish: 1.00 mm thick 1 Sqm 428 28.92
K.117
BMT-
K.118
BMT-
K.119
BMT-
540 Teak Veneer Lamination - 4 mm thick - Pencil Grains 1 Sqm 450 28.94
K.120
BMT-
541 Teak Veneer Lamination - 4 mm thick - Natural Grains 1 Sqm 829 28.73
K.121
BMT-
542 8 mm thick V-Designer Board 1 Sqm 407 17.97
K.122
BMT-
543 50 mm thick V-PANEL 1 Sqm 1,071.00 18.08
K.123
BMT-
544 75 mm thick V-PANEL 1 Sqm 1,285.00 18.11
K.124
L PLYWOOD
BMT-
545 3 Ply - 4 mm thick Plywood(IS:303) MR Grade 1 Sqm 407 28.8
L.01
BMT-
L.02
27
Total
Buildings Embedded
(%)
BMT-
L.03
BMT-
L.04
BMT-
L.05
BMT-
L.06
BMT-
L.07
BMT-
552 3 Ply - 4 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 465 28.81
L.08
BMT-
L.09
BMT-
L.10
BMT-
L.11
BMT-
L.12
BMT-
557 9 Ply - 15 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 1,205.00 28.88
L.13
BMT-
558 9 Ply - 19 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 1,209.00 28.75
L.14
BMT- 3 Ply-4 mm thick One side Teak Veneer Decorated Plywood
559 1 Sqm 602 28.91
L.15 (IS:1328)
BMT- 5 Ply - 6 mm thick One side Teak Veneer Decorated Plywood
560 1 Sqm 784 28.74
L.16 (IS:1328)
561 1 Sqm 1005 28.85
L.17 (IS:1328)
562 1 Sqm 1,280.00 28.77
L.18 (IS:1328)
BMT- 5 Ply - 9 mm thick Both sides Teak Veneer Decorated Plywood
563 1 Sqm 1,311.00 28.78
L.19 (IS:1328)
BMT- 9 Ply - 12 mm thick Both sides Teak Veneer Decorated Plywood
564 1 Sqm 1,529.00 28.81
L.20 (IS:1328)
M CEILINGS, WALL PARTITIONS & WALL LININGS
BMT- Gypsum Board tiles of size not less than 0.595 M x 0.595 M of
565 1 Sqm 281 18.07
M.01 12.5 mm thick as per IS 2095 -1992
BMT- Gypsum Board tiles of size not less than 0.595 M x 0.595 M of 9
566 1 Sqm 274 18.1
M.02 mm thick as per IS 2095 -1992
BMT-
567 Gypsum Board Plain sheet 12.5 mm thick as per IS 2095 -1993 1 Sqm 248 18.1
M.03
BMT-
568 G.I. Ceiling Angle - 25 mm x 10 mm x 0.55 mm 1 RM 74 17.46
M.04
BMT-
569 G.I. Ceiling Section 51.5 mm x 26 mm x 10.5 mm x 0.55 mm thick 1 RM 85 18.06
M.05
BMT-
570 G.I. Intermediate Section 45 mm x 15 mm x 15 mm x 0.9 mm 1 RM 84 18.31
M.06
BMT- G.I. Perimeter Channel - 20 mm x 27 mm x 30 mm (web) of 0.55
571 1 RM 74 17.46
M.07 mm thick
BMT-
572 G.I.- Precoated Fine line Grid 25 mm x 25 mm x 0.7 mm 1 RM 41 17.14
M.08
BMT-
573 G.I.- Precoated Fine line Grid 15 mm x 25 mm x 0.7 mm 1 RM 37 19.35
M.09
28
Total
Buildings Embedded
(%)
BMT-
574 GI - Precoated - T-Sec- 24 mm x 38 mm x 0.7 mm thick 1 RM 54 17.39
M.10
BMT-
575 Hot dipped GI Angle - - Grid: 19 mm x 19 mm 1 RM 40 17.65
M.11
BMT-
576 Polyester painted GI - T Section - 24 x 32 mm 1 RM 50 19.05
M.12
BMT-
577 Polyester painted GI - T Section - 24 x 25 mm 1 RM 45 18.42
M.13
BMT-
578 Polyester painted GI - T Section - 24 mm x 27 mm 1 RM 46 17.95
M.14
BMT-
579 Aluminium Angle : 24 mm x 24 mm 1 RM 26 18.18
M.15
BMT-
580 Anodised Aluminium T Section : 24 x 24.5 x 2.4 mm 1 RM 34 17.24
M.16
BMT-
581 Connecting Clips 1 Each 2 0
M.17
BMT-
582 Rawl Plug 1 Each 2 0
M.18
BMT-
583 6 mm Nylon Rawl Plug 1 Each 3 0
M.19
BMT-
584 Soffit Cleats 1 Each 2 0
M.20
BMT-
585 Drywall Screws - 25 mm 1 Each 2 0
M.21
BMT-
586 Jointing Compound 1 Kgs 29 26.09
M.22
BMT-
587 Jointing Paper Tape 1 RM 5 25
M.23
BMT-
588 Drywall Top Coat 1 Litre 142 29.09
M.24
BMT-
589 Universal Holding Clips 1 Each 3 0
M.25
BMT-
590 4 mm Dia GI Connecting Rod 1 RM 12 20
M.26
BMT-
591 2 mm Dia GI Connecting Rod 1 RM 10 25
M.27
14 mm - Mineral Fibre sheet 600 x 600 of beauty-Sky (Board /
Tegular) Edge tiles with a Humidity Resistance of 80% RH,
BMT-
592 Average NRC 0.50, Light Reflectance >80%, Thermal 1 Sqm 492 17.99
M.28
Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class
0/Class 1
15 mm - Mineral Fibre sheet 600 x 600 of fissured-ANF (Board /
Tegular) Edge tiles with a Humidity Resistance of 90% RH,
BMT-
593 Average NRC 0.50, Light Reflectance >80%, Thermal 1 Sqm 575 18.07
M.29
0/Class 1
16 mm - Tegular Edge 600 x 600 of MINATUFF (Board /
Tegular/ Micro look) Edge tiles with a Humidity Resistance of
BMT-
594 99% RH, Average NRC 0.60, Light Reflectance >88%, Thermal 1 Sqm 619 18.13
M.30
0/Class 1
BMT- 12 mm - Mineral Fibre sheet 600 x 600 (Square / Tegular) Edge
595 1 Sqm 380 18.01
M.31 tiles
BMT- 15 mm - Mineral Fibre sheet 600 x 600 (Square / Tegular) Edge
596 1 Sqm 480 18.23
M.32 tiles
29
Total
Buildings Embedded
(%)
Perforated wall panels ARMSTRONG channelled wood works

sheets of width 128 mm, thickness of 16mm and length 2440 mm
made of a high density particle board substrate with a laminated
facing as per the approved shade/ species & finish and a
BMT- melamine balancing layer on the reverse side, with a special
597 1 Sqm 2,738.00 18.12
M.33 perforation pattern “Helmholtz” fluted perforation on the visible
surface with a minimum sag resistance of RH90 and a fire rating
class of 1 as per Part 7 of BS 476 with a “tongue-and-grooved”
edges and the back of the perforated panel is with sound
absorbing non-woven acoustical fleece
Armstrong VARIT PUR Vinyl Flooring Sheet manufactured by
Armstrong World Industries, Inc, of size 1.83 m width having a
nominal total thickness of 2 mm with a wearing surface
impregnated polyurethane homogeneous mixture of PVC,
BMT-
598 Plasticizers, Urethane, colour pigments, filler calendared, 1 Sqm 1,254.00 18.08
M.34
pattern, with wearing Resistance as per EN 660-2, Fire
Resistance of more than 11kW/m2 as per ISO 9329-1 Critical
Radiant Flux, Slip resistance of R9 as per Oil Wet Ramp test (AS
4586)
Vinyl Composition Floor Tiles of size 305 mm x 305 mm having
an overall thickness of 2.0mm manufactured by M/s. Armstrong
BMT-
599 World Industries, radiant flux greater than 11kW/m2 as per ISO 1 Sqm 582 18.05
M.35
9329-1 , smoke resistance less than 750% minutes as per ISO
9239.1, electrical resistance of 1010 Ohm
Armstrong Royal LG-1 Vinyl Flooring Sheet manufactured by
Armstrong World Industries, Inc, of size 1.83 m width having a
nominal total thickness of 2 mm with a wearing surface
BMT- impregnated polyurethane homogeneous mixture of PVC,
600 1 Sqm 1,711.00 18.16
M.36 Plasticizers, Urethane, colour pigments, filler calendared,
pattern, with wearing Resistance as per EN 660-2, Fire
Resistance of more than 11kW/m2 as per ISO 9329-1 Critical
Radiant Flux, Slip resistance of R9
BMT-
601 Supply of Thermocole 12 mm thick sheets 1 Sqm 26 18.18
M.37
BMT-
602 Supply of Thermocole 19 mm thick sheets 1 Sqm 46 17.95
M.38
Supply & fixing 75mm thick metal stud partition using 12.5 mm
thick Gypboard conforming to IS 2095-1982 screw fixed to either
BMT- side to 48 mm studs of 0.55 mm thick with the 50 mm floor and
603 1 Sqm 1,222.00 16.05
M.39 ceiling channel 0.55 mm and the joints duly finished with joint
compound, paper tape and two coats Dry wall top coat as per
specification.
Providing wooden panelling 12 mm thick Novopan one side
laminated sheet fixed on wooden frame of BT wood size 50.8 mm
BMT- x 25.4 mm (2"x1") at distance of 609.6mm (2'-0") intervals of
604 1 Sqm 1,810.00 16.03
M.40 both ways providing 3/4" x 1/2" (19.05 mm x 12.7 mm) size BT
wood ornamental cover beading and necessary screws, fevicol
glue complete for finished item of work.
30
Total
Buildings Embedded
(%)
Supply , manufacturing , installing of library Rack of 19 mm thick

ISI marked commercial ply All round boxing verticals, Horizontal
for depth of 609.6mm (2'-0) and shelves with 3.5 mm thick teak
veneer covered with on exposed surface externally and internally
and each panels with 6mm thick ISI commercial ply with 3.5 mm
thick teak veneer for glazed shutters teak wood size 55 mm x
BMT- 28mm with 5 mm thick glass fixed with ornamental beading and
605 1 Sqm 7,750.00 25.2
M.41 other ornamental beading is covered as per drawing including
brass hinges, ornamental handles, ball catchers, buffers, locking
system etc, and all the commercial ply exposed edges are to be
covered with 6 mm thick teak wood lipping. All the teak veneer
and teak wood and ornamental beading is coated with polishing
and a coat of melamine finish etc, complete for finished item of
work.
BMT-
606 Calcium Silicate Boards - 6mm thick 1 Sqm 230 28.49
M.42
BMT-
M.43
BMT-
M.44
BMT-
M.45
Supply and Fixing 66mm thick metal stud partition screw fixed to
either side of 48mm studs of 0.55mm thick with 50mm floor and
BMT- ceiling channel 0.55mm and the joints duly finished with joining
610 1 Sqm 1,290.00 16.01
M.46 compound, glass fibre tape and two coats dry wall top coat as per
specification finished Item of work- using 8mm thick Calcium
silicate boards
611 1 Sqm 1,444.00 15.98
specification finished Item of work - Using 10mm thick Calcium
silicate boards
612 1 Sqm 1,597.00 16.06
specification finished Item of work - Using 12mm thick Calcium
silicate boards
Supply and fixing of wall lining fixing to GI channels of perimeter
channel 30mm x 27mm x 0.55 thick and ceiling channels of
BMT- 51.1mm x 26mm x 10.5mm x 0.55mm thick and fixing and
613 1 Sqm 765 16.08
M.49 finishing using joint compound and glass fibre tape complete
finish as per specification without painting for finished item of
work: using 8mmthick Calcium silicate boards

614 1 Sqm 843 15.96
work: Using 10mm thick Calcium silicate boards
31
Total
Buildings Embedded
(%)

615 1 Sqm 919 16.04
work: Using 12mm thick Calcium silicate boards
Supply and Fixing 66mm thick metal stud partition using 2 layers
of 12mm thick Calcium silicate boards screw fixed to either side
to 48mm studs of 0.55mm thick with 50mm floor and ceiling
channel 0.55mm.The boards joints are to be staggered to avoid
BMT-
616 through passage. Ceramic wool of 50mm thick, 64kg/m3 density 1 Sqm 4,288.00 16.02
M.52
is to be placed in cavity of the partition. The joints duly finished
with joining compound, glass fibre tape and two coats dry wall
top coat as per specification without painting for finished item of
work
Supplying and fixing of false ceiling using Plaster of Paris Boards
BMT- 12 mm thick with standard GI ceiling angles, sections perimeter
617 1 Sqm 441 16.05
M.53 channels including cost and conveyance of all materials and
labour charges etc complete
Supplying and fixing of false ceiling using Plaster of Paris Boards
BMT- 10 mm thick with standard GI ceiling angles, sections perimeter
618 1 Sqm 367 16.14
M.54 channels including cost and conveyance of all materials and
labour charges etc complete
BMT-
619 Designer ceiling Cement Boards -thickness 3.2 mm 1 Sqm 259 28.86
M.55
BMT-
620 High pressure steam cured Cement Boards 4 mm thick 1 Sqm. 138 28.97
M.56
BMT-
M.57
BMT-
M.58
BMT-
M.59
BMT-
M.60
BMT-
M.61
BMT-
M.62
BMT-
M.63
BMT-
M.64
BMT-
629 High pressure steam cured designer Cement Boards 4 mm thick 1 Sqm. 204 29.11
M.65
BMT-
630 High pressure steam cured designer Cement Boards 6 mm thick 1 Sqm. 300 28.76
M.66
32
Total
Buildings Embedded
(%)
Supply and fixing of E-board wall panelling (water, fire and

Termite proof) with frame work made of GI stud profile of size
48 x 40 10 x 0.6 mm thick placed at every 610 mm C/C intervals
fixed vertically in between floor and roof Ù’ track of size 50 x 30
x 0.6 mm thick duly fixed with self expansion screws and with 8
BMT-
631 mm thick E-board / 6 mm thick E-board classic cladded around 1 Sqm. 837 16.09
M.67
with self tapping self embedding screws fixed at every 300 mm
(centres) leaving a 3 mm gap between two panels of width 2’-0”.
The Gap will be covered with a decorative beading. Surface will
be given a smooth finish over a coat of primer. - With 8 mm E-
board
Supply and fixing of E-board wall panelling (water, fire and
Termite proof) with frame work made of GI stud profile of size
48 x 40 10 x 0.6 mm thick placed at every 610 mm C/C intervals
fixed vertically in between floor and roof Ù’ track of size 50 x 30
BMT-
632 mm thick E-board / 6 mm thick E-board classic cladded around 1 Sqm. 893 15.97
M.68
with self tapping self embedding screws fixed at every 300 mm
(centres) leaving a 3 mm gap between two panels of width 2’-0”.
The Gap will be covered with a decorative beading. Surface will
be given a smooth finish over a coat of primer. - With 6 mm E-
board Designer
Supply and fixing double skin E-board partition with Frame work
made of GI stud profile of size 48 x 40 x 10 x 0.6 mm thick placed
at every 610 mm C/C intervals and 915 mm horizontal intervals
duly fixed with self expansion screws, the E-board of 8 mm thick
BMT- cladded around with self tapping self embedding screws fixed at
633 1 Sqm. 1,227.00 15.97
M.69 every 300 mm (centres) leaving 3 mm gap between two panels of
width 2’-0” (610 mm). The gap will be covered with decorative
moulding surface will be given a smooth finish over cement
primer. The rate is inclusive of cost and conveyance of all
materials and labour charges etc. complete.
Providing and fixing of 50mm thick EVEREST SOLID WALL
PANEL Sandwich panels made of light Weight FRACC two 4mm
thick non-asbestos fibre reinforced cement sheets on either side
of the lightweight concrete core composed of Portland cement
binders with tongue and groove arrangement. The bottom of the
panel shall be fixed to the floor channel made up of 1 mm thick GI
channels of size 14x50x25 mm fixed to the existing floor with
6x60mm nylon self expansion screws at 600 mm C/C and top of
BMT- the panel fixed with ceiling channel made out of 1mm thick GI
634 1 sqm 1,501.00 25.19
M.70 Channel of size 38x50x38mm duly fixed to the existing ceiling
with 6x60mm nylon self expansion screws at 600 mm C/C. All the
tongue and groove joints of the panels have to be properly
cleaned and both the panels have to be fixed by applying the
mixture of fly ash and sodium silicate in between and Everest
jointing compound all the exposed joints. The rate includes cost
of 50mm EVEREST SOLID WALL PANELS, G.l. Floor and ceiling
channel. The panels can be flushed by using paper tape and
Everest jointing compound all complete
33
Total
Buildings Embedded
(%)
Providing and fixing of 75mm thick EVEREST SOLID WALL

PANEL Sandwich panels made of light Weight FRACC two 4mm
thick non-asbestos fibre reinforced cement sheets on either side
of the lightweight concrete core composed of Portland cement
binders with tongue and groove arrangement. The bottom of the
panel shall be fixed to the floor channel made up of 1 mm thick GI
channels of size 14x75x25 mm fixed to the existing floor with
6x60mm nylon self expansion screws at 600 mm C/C and top of
BMT- the panel fixed with ceiling channel made out of 1mm thick GI
635 1 Sqm. 1,922.00 25.21
M.71 Channel of size 38x75x38mm duly fixed to the existing ceiling
with 6x60mm nylon self expansion screws at 600 mm C/C. All the
tongue and groove joints of the panels have to be properly
cleaned and both the panels have to be fixed by applying the
mixture of fly ash and sodium silicate in between and Everest
jointing compound all the exposed joints. The rate includes cost
of 75mm EVEREST SOLID WALL PANEL panels, G.l. Floor and
ceiling channel. The panels can be flushed by using paper tape
and Everest jointing compound all complete.
Supply and fixing of BISONPANEL (IS 14276) false ceiling using
8MM BISONPANEL with galvanized and pre painted steel T
section of size 24mm x 38mm x 0.3 mm for main T duty pre
punched to accept cross T section of size 24mm x 30mm x 0.3
mm duly punched at both ends for insertion into main T. The grid
BMT-
636 size will be 610mm x 610mm. The frame work (grid) is 1 Sqm 1039 25.18
M.72
suspended to the roof by using G.I flat of 0.60mm or 14-gauge G.I
wire with necessary fixers to the roof and frame work.
BISONPANEL lay on the grid. The cost inclusive of necessary
hardware, labour, one coat of primer (Both side) and two coats of
smooth finish on visible side.
Supply and fixing BISONPANEL(IS 14276) wall panelling using 10
MM BISONPANEL with frame work made of GI stud section of
size 48mm x 35mm x 0.55mm thick placed at every 610 mm C/C
intervals vertically and at 1200mm internals horizontally fixed to
the wall by means of self expansion screws and caps.
BMT-
637 BISONPANEL is to be fixed to frame by means of self taping 1 Sqm 1,371.00 25.21
M.73
screws placed at every 300 mm intervals leaving 3mm gap
between two panels. The cost inclusive of one coat of Altek
primer and two coats of Altek smooth finish and cost &
conveyance of all materials, labour charges etc. complete as per
the direction of Engineer in charge.
Supply and fixing BISONPANEL (IS 14276) double skin partition
using with 10 MM BISONPANEL made out of G.I. track section of
size 50mmx 35mm x 0.55 mm for fixing to the roof and floor and
stud section of size 48mm x 35mm x 0.55mm placed in track
section vertically at 610mm intervals and at 1200mm intervals
horizontally fixed to the wall by means of self expansion screws
BMT-
638 and caps to the wall and roof. BISONPANEL is to be fixed both 1 Sqm 2,003.00 25.19
M.74
sides of frame work by using self taping screws fixed at every
300mm intervals to the frame work leaving 3 mm gap between
two panels. The cost inclusive with one coat of Altek primer and
two coats of Altek smooth finish and cost and conveyance of all
materials to site, labour charges etc., complete as per the
direction of Engineer in charge.
34
Total
Buildings Embedded
(%)
Supply and fixing of BISONLAM double skin partition using with

10 mm BISONLAM made out of G.I track section of size 50 mm x
35mm x 0.55mm for fixing to the roof and floor and stud section
of size 48mm x 35mm x 0.55mm placed in track section vertically
at 610mm intervals and at 1200mm internals horizontally. The
BMT-
639 frame is fixed by means of self expansion screws and caps to the 1 Sqm 2,759.00 25.18
M.75
wall / roof. BISON LAM is to be fixed both sides of the frame work
by using 2mm thick electro plated CR flat section leaving 3mm
gap between two panels. The cost inclusive of cost and
conveyance of all materials to sites, other materials incidentals
and labour charges as per the direction of Engineer in charges.
Supply and fixing of BISONLAM wall panelling using 12MM
BISONLAM with frame work made of G.I stud section of size
48mm x 35mm x 0.55mm thick placed at every 610mm intervals
vertically and at 1200mm internals horizontally fixed to the wall
BMT-
640 by means of self expansion screws and caps. BISON LAM is to be 1 Sqm 2,083.00 25.18
M.76
fixed to frame by means of self-taping screws placed at every
300mm intervals leaving 3mm gap between two panels. The cost
inclusive of Conveyance of materials, Labour charges etc.,
complete as per the direction of Engineer in charge
Supply and fixing of BISON LAM aluminium glazed partitions
using 10MM BISONLAM and 5.00 mm thick plain glass to full
height. Using with BISON LAM to a height of 0.91 meter at
bottom panel and remaining height with glass and aluminium
BMT- sections anodized to 12 to 15 microns and of sections of size
641 1 Sqm 3,435.00 25.18
M.77 37mm x 62mm and 1.5mm thickness with one meter centre to
centre duly fixed with clip beading on both sides including fixing
the frame to pillars by M.S. flats, bolts and nuts including cost and
conveyance of all materials etc., complete as directed during
execution.
Providing and fixing 50mm thick “RAJSHRI” or equivalent SEMI
HEIGHT SOLID PVC PARTITION consisting of 49mm sandwich
PVC panel made out of 36mm high density expanded polystyrene
sheet(E.P.S.-Thermocole) stuck on both side with 2mm thick
plain/printed /prelam PVC rigid foam sheets reinforced with
frame work made from 35mmX5mm M.S. Angle. In between two
M.S. Angles 5mm thick plain/printed/prelam heat moulded
“Rajshri” PVC ‘C’ channel of size 50X100mm with feathered edges
shall be fixed on the floor & 50X75mm with feathered edges
plain/printed /prelam PVC ‘C’ channel. In between adjoining EPS
BMT-
642 sandwiched PVC partitions panel 5mm thickX75mm width 1 sqm 2,950.00 16
M.78
plain/printed/prelam PVC sheet feathered at edges shall be
stuck on front & back face using solvent cement etc. in places
where two partitions meet to from an ‘L’ shape the panels are
joined 5mm thick plain/printed/prelam heat moulded “Rajshri”
PVC ‘L’ section of size 75mmX75mm with feathered edges shall
be fixed on front & back side. This is done to maintain the
symmetry of design. An additional 5mm thick PVC strip of 40mm
width is to be stuck on the interior side of the ‘C’ Channel using
PVC solvent adhesive, complete as per direction of Engineer-in-
Charge, manufacture’s specification & drawing
35
Total
Buildings Embedded
(%)
Providing and fixing “RAJSHRI” or equivalent INSULATED PVC

WALL PANELING shall consist of PVC insulated panels having
wall thickness of 1mm /1.5mm/2mm PVC sheet and the desired
thickness of EPS (dependent on the insulation required) screwed
into the wall using screws of adequate length. The screws shall be
placed at a distance of 150mm and shall be 25mm from the edge
BMT- of the insulated panel on all from sides of the panel. The PVC
643 1 sqm 2,185.00 16.04
M.79 strips of 5mm thick PVC sheet of width 75mm feathered at the
edges shall be stuck using solvent cement adhesive at the places
where two panels are joined, so as to cover the screw of both the
panels, using solvent cement. 90 heat bent strips of 5mm thick
PVC sheets of width 75mm X75mm feathered at the edges shall
be stuck at wall joints / pillars etc. , complete as per direction of
Engineer-in-Charge, manufacture’s specification & drawing
Providing and fixing RAJSHRI or equivalent plain PVC rigid foam
sheet wall panelling of thickness 5mm consisting of panels
having size 1220mm X2440mm stuck on inner frame work of
25mm wide strips of 5mm thick PVC rigid foam sheet. The strips
should have in their centre a grove of 6mm width and 2mm
depth for sinking the head of the screw used to fix the strips to
the wall and should be placed vertically at equal intervals of
405/407mm centre to c entre. The PVC strips shall be fixed to the
wall using 65mm long M.S. screws through the groove in the strip
BMT- by using PVC fasteners. The distance between two screws shall
644 1 sqm 2,076.00 16.04
M.80 not be more than 300mm. a groove of 2mm may be left at the
joint of two panels for aesthetic looks. This framework is done
for making existing wall surface in ensured level and for sticking
the wall panelling sheet (panel) on it. The exact size of the panel
and correspondingly of the grid May be varied depending n the
size of the wall. However it must ensure that a strips of 5mm
thick PVC sheet of width 75mm feathered at the edges shall be
stuck at the places where two panels are joined, using solvent
cement. , complete as per direction of Engineer-in-Charge,
manufacture’s specification & drawing
Providing and fixing RAJSHRI or equivalent false ceiling
consisting of 600mmX600mm, Solid PVC insulation panels
having wall thickness of 1mm thick plain PVC rigid foam sheet
and EPS as defined in of desired thickness depending on
insulation required shall be insert in a frame work made using
anodized aluminium Tee section of sizes 1”X1” (25X25mm, 19
BMT-
645 gauge or 1mm thick) in square pattern of grid sizes of 2’X2’ 1 sqm 1,350.00 15.98
M.81
(600X600mm). The aluminium framework is supported from the
ceiling with the help of G.I. hook and G.I. wire/6mm.M.S. rods of
required sizes to maintain proper level etc. the aluminium
framework is supported on side wall with the use of aluminium
1”X1” (25X25mm) angles, complete as per direction of Engineer-
in-Charge, manufacture’s specification & drawing
BMT- Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 13 mm
646 1 Sqm 368 17.95
M.82 thick Square Edge - Fissura Fine Model
647 1 Sqm 411 18.1
M.83 thick Square Edge - Speckle Model
648 1 Sqm 454 18.23
M.84 thick Square Edge - Textura Model
36
Total
Buildings Embedded
(%)

649 1 Sqm 465 18.02
M.85 thick Standard Regular Edge
650 1 Sqm 476 18.11
M.86 thick Fissura Fine Model
651 1 Sqm 497 18.05
M.87 thick Speckle Model
652 1 Sqm 539 18.2
M.88 thick Textura Model
Supply and fixing of PVC false ceiling on MS/GI made skeleton
framework. The frame shall be 24 X 48mm MS tube section fixed
along with the wall. The entire frame work shall be concealed
BMT-
653 with PVC section having overall dimensions of 6 X 250mm with a 1 Sqm. 1,498.00 16.03
M.89
wall thickness of 1mm ± 0.3mm with tongue and groove system,
provided with necessary arrangements for electrical
connections, complete, for finished item of work.
Supply and fixing of wall panelling on the framework of wooded

rippers of 24 X 24mm of required size. The entire framework
shall be panelled with PVC section having overall dimensions of 6
BMT-
654 X 250mm with a wall thickness of 1mm ± 0.3mm. The panels are 1 Sqm. 1,419.00 16.03
M.90
joined with tongue and groove system. Necessary cut-outs for
electrical connections to be provided at required places
complete, for finished item of work.
Supply and fixing of PVC Double Skin Partition. The entire
framework shall be carried out by mild steel section having
overall dimensions of 24 X 48mm with a wall thickness of 1.2mm.
The entire framework shall be concealed with PVC section
BMT-
655 having overall dimensions of 6 X 250mm with a wall thickness of Sqm. 2,490.00 16.03
M.91
1mm ± 0.3mm both sides. Glass provision/Door provision can be
provided along the partition wherever required. Partitions can
be made full or half as per requirement complete, for finished
item of work.
NCL or equivalent Partitions: Supply and fixing of partitions
made of seccolor pre-painted steel (base steel as per IS 513 of
0.58 mm thick ‘D’ quality, galvanized as per IS 277 with Zinc of
120 GSM). Primer coated with epoxy primer of 5-7 microns
thick, finish painted with a polyester paint of 12-16 microns thick
alkyd backer. Section for outer frame should be 46x52mm,
section for shutter should be 46x46mm, section for mullion
should be 46x70mm, section for beading should be 18x25mm
and section for middle and bottom rail (Lock Rail and Kick Rail)
BMT- of size should be 23x130mm. The partition should be paneled
656
M.92 with 9mm pre-laminated particle board to a height of 0.91m
from the bottom, and remaining height with 5mm thick plain
glass With Ethyl Propylene Diamine Monomer (EPDM) Gaskets.
The sections are to be cut to length, mitre joined with corner
bracket Centre mullions are to be fixed using mullion cap.
Gaskets made of Ethyl Propylene Diamine Monomer (EPDM).
Corner brackets made of CRCA with zinc phosphate. Mullion
caps made of Glass filled nylon. The above frames should be
fixed to the concrete/masonry wall by means of self expanding
screws, and complete for finished item of work.
37
Total
Buildings Embedded
(%)
Fixed Partition: Outer frame section size of 46x52mm, mullion

BMT-
657 section should be of 46x70mm, fixed beading should be of 1 sqm 4,560.00 16.03
M.93
18x25mm.
Fixed Partition with Door: Outer frame section size of 46x52mm,
BMT- mullion section should be of 46x70mm, fixed beading should be
658 1 sqm 5,200.00 16.02
M.94 of 18x25mm, section for shutter should be of 46x46mm and
section for middle & bottom should be of size 23x130mm
Supply & fixing of 50 mm thick sandwiched panel of two fibre-

reinforced cement sheets enclosing a lightweight concrete core
composed of Portland cement, binders and a mix of silicaceous
BMT-
659 and micaceous material aggregate having Tongue and Groove Sqm. 1,392.00 16
M.95
joint for partitions and walls using G.I. Flooring & Ceiling
channels, hardware, Labour, transportation, wastages, etc., as a
complete item of work excluding finishing, fittings & fixtures.
Supply & fixing of 75 mm thick sandwiched panel of two fibre-

reinforced cement sheets enclosing a lightweight concrete core
composed of Portland cement, binders and a mix of silicaceous
BMT-
660 and micaceous material aggregate having Tongue and Groove Sqm. 1,767.00 16.02
M.96
joint for partitions and walls using G.I. Flooring & Ceiling
channels, hardware, Labour, transportation, wastages, etc., as a
complete item of work excluding finishing, fittings & fixtures.
Supply of sandwiched panel of two fibre-reinforced cement

sheets enclosing a lightweight concrete core composed of
BMT-
661 Portland cement, binders and a mix of silicaceous and micaceous 1 Sqm. 964 18.14
M.97
material aggregate panels of 50mm thick x 600mm standard
width x 2400mm, 2700mm, 3000mm & 3300mm lengths
Supply of sandwiched panel of two fibre-reinforced cement

sheets enclosing a lightweight concrete core composed of
BMT-
662 Portland cement, binders and a mix of silicaceous and micaceous 1 Sqm. 1,259.00 18.11
M.98
material aggregate panels of 75mm thick x 600mm standard
width x 2400mm, 2700mm, 3000mm & 3300mm lengths
Providing & fixing Pre-coated G.I. Wall angle size 22mm X 20mm
X 0 .4 mm thick of 3050mm long fixed to the brick wall/ partition
at the perimeter of ceiling with nylon sleeves and screw at 610
mm centres. Then suspending main G…! Frame "T" section size of
32mm X 24mm X 0.30mm thick of 3600mm long from soffit in
one direction with the help of Rawl Plug and G.I. Wire/Rod of
3mm diameter with 1220mm centres G.I. Cross "T" section of
663 size 25mm X 24mm X 0.30mm thick of 600mm long is inserted
into the slots provided in main "T" at 600mm centres to form a
grid of 600mm X 600mm. NewAGE 12/ 15mm tiles of
size600mm X 600mm can be laid on to the grid etc. NewAGE tiles
with a Humidity resistance of 95% RH, Average NRC 0.55 to
0.60,Light reflectance >85% K value 0.052-0.57 ,Fire
performance class O/Class 1 (BS 476) along with surface 3 coats
of white paint as directed by department officers.
BMT-
664 Regular Pin Holes PH-001 (Square & Tegular Edge) 12mm 1 Sqm. 636 16.06
M.99
BMT-
665 Fin Fissured Model FF-002 (Square & Tegular Edge) 12mm 1 Sqm. 636 16.06
M.100
38
Total
Buildings Embedded
(%)
BMT-
666 Random Holes AF-003 (Square & Tegular Edge) 12mm 1 Sqm. 636 16.06
M.101
BMT-
667 Random Pin Holes APH-004 (Square & Tegular edge) 12 mm 1 Sqm. 636 16.06
M.102
BMT-
668 Sand Face ASF-005 (Square & Tegular Edge) 12mm 1 Sqm. 739 16.01
M.103
BMT-
669 Regular Pin Holes PH-001 (Square & Tegular Edge) 15mm 1 Sqm. 750 16.1
M.104
BMT-
670 Fin Fissured Model FF-002 (Square & Tegular Edge) 15mm 1 Sqm. 750 16.1
M.105
BMT-
671 Random Holes AF-003 (Square & Tegular Edge) 15mm 1 Sqm. 750 16.1
M.106
BMT-
672 Random Pin Holes APH-004 (Square & Tegular Edge) 15 mm 1 Sqm. 750 16.1
M.107
BMT-
673 Sand Face ASF-005 (Square & Tegular Edge) 15mm 1 Sqm. 861 16.04
M.108
BMT-
674 Vinyl laminated MPL Gypsum Panels 600 X 600 X 9 mm 1 Sqm. 329 15.85
M.109
Supply and fixing of wall panelling of 8 mm thick V-BOARD (IS
14862) provided with frame work made of GI stud profile of size
48 x 40 x 10 x 0.55 mm thick placed at every 610 mm C/C
intervals fixed vertically in between floor and roof ‘U’ track of
BMT-
675 size 50 x 30 x 0.6 mm thick duly fixed with self-tapping, self- 1 Sqm 921 15.99
M.110
embedding screws fixed around at every 300 mm (centres)
leaving a 3 mm gap. The Gap will be covered with a decorative
beading or jointing compound. Surface will be given a smooth
finish with one coat of primer. Inclusive of all taxes.
Supply and fixing of wall panelling of 10 mm thick V-BOARD (IS
14862) provided with frame work made of GI stud profile of size
48 x 40 x 10 x 0.55 mm thick placed at every 610 mm C/C
intervals fixed vertically in between floor and roof ‘U’ track of
BMT-
676 size 50 x 30 x 0.6 mm thick duly fixed with self-tapping, self- 1 Sqm 964 16
M.111
embedding screws fixed around at every 300 mm (centres)
beading or jointing compound. Surface will be given a smooth
finish with one coat of primer. Inclusive of all taxes.
Supply and fixing double skin 8mm thick V- BOARD (IS 14862)
partition with Frame work made of GI stud profile of size
48x40x10x 0.55 mm thick placed at every 610 mm C/C intervals
and 1220 mm horizontal intervals duly fixed with self-expansion
BMT- screws, the V- Board of 8 mm thick cladded around with self-
677 1 Sqm 1,462.00 16.03
M.112 tapping self-embedding screws fixed at every 300 mm (centres)
moulding surface will be given a smooth finish with one coat of
primer. The rate Inclusive of cost and conveyance of all materials
and labour charges etc., Complete.
39
Total
Buildings Embedded
(%)
Supply and installation of V-PLANKS(IS 14862) of size 150 x

3000 x 8mm manufactured by M/s. Visaka Industries Limited, on
to an existing steel structure made using Top hat profile / furring
channel of 51mm web, 22mm flange of 0.5mm thick (minimum)
fastened to the plastered brick wall using anchor bolts / anchor
screws, spaced at every 2’ (610mm). V planks are screwed to the
BMT- furring channel using self-drilling screws of 8g x 25mm
678 1 Sqm 1,093.00 16.03
M.113 (minimum) at every 2’ at distance of 15mm from the edge of the
plank. V Planks fixing is started from the bottom, followed by
next plank overlapped by 25mm on to the bottom plan thereby
hiding the screws perfectly and continued up to the top. Water
based cement primer should be applied to the planks before
finishing with the exterior grade paints. (up to 3 floors) Above 3
floors labour charges will be extra and steel grid will change.
Supply and installation of V- PLANKS (IS 14862) of size 200 x
3000 x 8mm thick manufactured by M/s. Visaka Industries
Limited, on to an existing steel structure made using Top hat
profile / furring channel of 51mm web, 22mm flange of 0.5mm
thick (minimum) fastened to the plastered brick wall using
anchor bolts / anchor screws, spaced at every 2’ (610mm). V
planks are screwed to the furring channel using self-drilling CSK
BMT-
679 screws of 8g x 25mm (minimum) at every 2’ at distance of 15mm 1 Sqm 1028 16.03
M.114
from the edge of the plank. V- Planks fixing is started from the
bottom, followed by next plank overlapped by 25mm on to the
bottom plan thereby hiding. The screws perfectly and continued
up to the top. Water based cement primer should be applied to
the planks before finishing with the exterior grade paints. (up to
3 floors) Above 3 floors labour charges will be extra and steel
grid will change.
DRY WALL PARTITION WITH 50 MM THICK V-PANEL #DIV/0!
Supply& fixing of 50 mm thick V-PANEL comprise of two 5mm
thick V-Boards (asbestos-free fibre reinforced cement sheets
conforming to IS 14862) strongly bonded with core material
which is light weight concrete mix of Portland cement, expanded
polystyrene bead aggregates and admixture. V-Panels with
unique semi-circular Tongue & Groove Joining System provides
better stability, rapid installation and better workability. The
bottom of the panel shall be fixed to the floor channel made up of
BMT-
679 1 mm thick GI channels of size 28x52x31 mm fixed to the existing 1 Sqm 1,660.00 16
M.115
floor with 6x60mm nylon self-expansion screws at 600 mm C/C
and top of the panel fixed with ceiling channel made out of 0.8
mm thick GI Channel of size 31 x 52 x 31 mm duly fixed to the
existing ceiling with 6x60mm nylon self-expansion screws at 600
mm C/C. All the tongue and groove joints of the panels have to be
properly cleaned and both the panels have to be fixed by
applying the jointing compound in all the exposed joints. The rate
includes cost of 50mm V-PANELS, G.l. Floor and ceiling Channel.
40
Total
Buildings Embedded
(%)
Supply& fixing of 75 mm thick V-PANEL comprise of two 5mm

thick V-Boards (asbestos-free fibre reinforced cement sheets
conforming to IS 14862) strongly bonded with core material
which is light weight concrete mix of Portland cement, expanded
polystyrene bead aggregates and admixture. V-Panels with
unique semi-circular Tongue & Groove Joining System provides
better stability, rapid installation and better workability. The
bottom of the panel shall be fixed to the floor channel made up of
BMT-
680 1 mm thick GI channels of size 28x77x31 mm fixed to the existing 1 Sqm 1,982.00 16.04
M.116
floor with 6x60mm nylon self-expansion screws at 600 mm C/C
and top of the panel fixed with ceiling channel made out of 0.8
mm thick GI Channel of size 31x77x31 mm duly fixed to the
existing ceiling with 6x60mm nylon self-expansion screws at 600
mm C/C. All the tongue and groove joints of the panels have to be
properly cleaned and both the panels have to be fixed by
applying the jointing compound in all the exposed joints. The rate
includes cost of 75mm V-PANELS, G.l. Floor and ceiling Channel.
N DOORS #DIV/0!
Providing and fixing factory made polyvinyl chloride (PVC) Door
Frame of the size 50 x 47mm with a wall thickness of 5mm, made
out of extruded 10 mm rigid PVC foam sheet, mitre cut at two
corners and joined with 2nos. of 150mm long brackets of
15x15mm M.S. square tube. The two vertical door profiles are to
BMT- be reinforced with 19x19mm M.S. Square tube of 19 gauges. The
681 1 Rm 325 25
N.01 door frame shall be fixed to the wall using 65/100mm long M.S.
Screws through the frame by using PVC fasteners. A minimum of
4nos. of screws to be provided for each vertical member &
minimum 2nos. for horizontal member etc. complete as per
manufacturers specification and direction of Engineer-in-Charge
for finished item of work
Providing and fixing 30mm thick Solid panel PVC door shutter
consisting of frame made out of M.S. tubes of 19 gauge thickness
and size of 19mm x 19mm for stiles, & 15mm x 15mm for top &
bottom rails. M.S. frame shall have a coat of steel primers of
approved make and manufacture. M.S. frame shall be covered
with 5mm thick heat moulded PVC ‘C’ channel of size 30 x 50mm
forming stiles, and 5mm thick, 75mm wide PVC sheets for top
rail, lock rail & bottom rail on either side, and 10mm (5mm x 2)
BMT-
682 thick, 20mm wide cross PVC sheet as gap insert for top rail & 1 Sqm. 2,362.00 25.17
N.02
bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the
M.S. frame welded / sealed to the stiles & rails with 30mm wide x
5mm thick PVC sheet beading on either side, and joined together
with solvent cement adhesive etc. An additional 5mm thick PVC
strip of 20mm width is to be stuck on the interior side of the ‘C’
Channel using PVC solvent adhesive. Complete as per direction of
Engineer-in-charge, manufacturer’s specification & drawing for
finished item of work.
41
Total
Buildings Embedded
(%)
Providing and fixing 30mm thick “RAJSHRI” or equivalent

BRAND FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC
DOOR SHUTTER consisting of frame made out of MS. Tubes of
19gauge thickness and size of 19mmX19mm for stiles, top and
bottom rails. MS. Frame shall have a coat of steel primers of
approved make and manufacture. MS. Frame covered with 5mm
thick heat moulded “Rajshri” Prelam Pac ‘C’ channel of size
30mm thickness, 70mm width out of which 50mm shall be flat
and 20mm shall be tapered in 450 angle on either side forming
stiles; and 5mm thick, 95mm wide Rajshri Prelam Pac sheet out
of which 75mm shall be flat and 20mm shall be tapered in 450 on
BMT- the inner side to form top and bottom rail 115mm wide Rajshri
683 1 sqm 2,700.00 25.23
N.03 Prelam Pac sheet out of which 75mm shall be flat and 20mm
shall be tapered on both sides to form lock rail. Top, bottom and
lock rail shall be provided either side of the panel. 10mm
(5mmX2) thick, 20mmwide cross Pac sheet shall be provided as
gap insert for top and bottom rail. Panelling of 5mm thick both
side Prelam Pac sheet to be fitted in the MS. Frame welded/
sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm
wide Pac sheet beading on inner side, and joined together with
solvent cement adhesive etc. an additional 5mm thick Pac strip of
20mm width is to be stuck on the interior side of the ‘C’ channel
using Pac solvent cement adhesive etc. complete as per direction
of Engineer – in-charge, manufacture specification and drawing.
BRAND FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL
PVC DOOR SHUTTER consisting of frame made out of MS. Tubes
of 19gauge thickness and size of 19mmX19mm for stiles, and
15mmX15mm for top and bottom rails. The MS. Frame shall have
a coat of steel primers of approved make and manufacture. MS.
Frame covered with 5mm thick heat moulded “Rajshri” single
side Prelam Pac ‘C’ channel of size 30mmX50mm to form
stiles.5mm thick& 75mm wide single side prelim Pac sheets shall
be for the top, bottom and lock rails. Panelling of 5mm thick one
BMT- side Pac sheet to be fitted in the MS. Frame and sealed to the
684 1 sqm 2,450.00 25.19
N.04 front (prelam side) stiles and rails (which should have a 5mm 45
bent portion as beading) and attached to the back (white/ivory)
stiles and rails which should have a 10mm 900 bent portion as
beading) using 2nos. 15mm wide X 5mm thick Pac sheet beading
inside the 90 bent beading. All stiles, rails and beadings are to be
joined to the panel using solvent cement etc. an additional 5mm
thick Pac strip of 20mm width to be stuck on the interior side of
the ‘C” channel using Pac solvent cement adhesive and 10mm
(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap
insert for top and bottom rail etc. complete as per direction of
Engineer –in-Charge, manufacture specification and drawing.
42
Total
Buildings Embedded
(%)
SUPPLY & FIXING or RAJSHRI or equivalent SINGLE SIDE

PRELAM SOLID PANEL PVC DOOR FRAME (CHOUKHAT)
Providing and fixing factory made Pac single side Prelam door
frame of the size 50X47 mm with a wall thickness of 5mm, made
out of extruded 5mm rigid Pac single side prelam sheet, meter
cut at two corners and joined with 2nos. of 150mm long brackets
BMT-
685 of 1515mm MS. Square tube. The two vertical door profiles are to 1 Rm 340 25
N.05
be reinforced with 19X19mm MS. square tube of 19guage. The
door frame shall be fixed to the wall using 65/100mm long MS.
Screws through the frame by using Pac fasteners. A minimum of
4nos. of screws to be provided for each vertical member and
minimum 2nos. for horizontal member etc. complete as per
manufacture specification and direction of Engineer-in-charge.
BRAND FACTORY MADE MOULDED DOOR SHUTTER consisting
of solid core single leaf flush door of 30mm thickness, lipped with
15mm (5mmX3) thick X 30mm width on one stiles and top rails
and 10mm (5mmX2) thick X 30mm width on the other stiles and
bottom rails. The inner panel laminated with 2mm thick termite
BMT-
686 proof, water proof and fire resistant moulded Pac sheet with 1 sqm 2,900.00 25.22
N.06
2,4,6 raised panel design in different panel and / or prelam
colours on one side after routing the moulded design on flush
door and 2mm prelam Pac sheet on other side using rubber
adhesive on flush door and solvent cement adhesive on Pac
lipping etc. complete as per direction of Engineer-in-Charge,
manufacture specification and drawing
RAJSHRI or equivalent MOULDED PVC DOOR – WOOD FREE
Providing and fixing 30mm thick Rajshri Brand factory made
Moulded door shutter- wood free consisting of frame made out of
MS. tubes 19gauge thickness and size of 25mmX25mm for stiles,
top and bottom rails. MS. Frame shall have a coat of steel
primers. The inner panel shall consist of 25mm thick High
density EPS conforming to IS 4671-1984 bounded with 2mm
thick termite proof, water proof and fire resistant moulded Pac
sheet with 2, 4, 6 raised panel design in different plain and / or
BMT-
687 prelam colours after routing to the moulded design on one side 1 sqm 2,475.00 25.19
N.07
and 2mm plain and / or prelam Pac sheet on other side of the
EPS. The edge of panel to be sealed with lipping of 10mm wide
PVC sheet bottom (made by sticking 2 rigid foam sheet of 5mm
thickness using Pac solvent cement) and stiles sides 25mm
(5mmX5) thick and 30mm width Pac sheet fitted along Ms. Tube
for lock provision for lock height 5mm thick Pac sheet of size
150mmX100mm fixed with upper and lower face of inner side of
EPS Panel etc. Complete as per direction of Engineer – in-Charge,
manufacture specification and drawing
43
Total
Buildings Embedded
(%)

BRAND FACTORY MADE WIRE MESH SOLID PVC DOOR
SHUTTER consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19mmX19mm for stiles and 15mm for top,
lock & bottom rails. MS. Frame shall have a coat of steel primers
of approved make and manufacture. 19mmX19mm M.S. square
tubes shall be covered with 5mm thick heat moulded “Rajshri”
PVC ‘C’ channel of size 30mm thickness, 90mm width out of
which 75mm shall be flat and 15mm shall be flat and 15mm shall
be bent in 900 on the inner side to from top and bottom rail land
130mm wide PVC sheet out of which 100mm shall be flat and
BMT- 154mm shall be bent in 900 on both side to from lock rail,
688 1 sqm 2,200.00 25.21
N.08 10mm(5mmX2) thick, 20mm wide cross PVC sheet as gap insert
for top rail & bottom rail. Panel will be of G.I. wire mesh of
24gauge to be fitted in by ’C’ channel of size 35mm X10mm on
the either side in the stiles. The inner side ‘C’ channel is fixed by
19mmX19mm MS. Tube on both sides with screws. The wire
mesh in top bottom & lock rail is sealed with15mm X 15mm tube
with G.I. wire 10mm(5mmX2) thick PVC strip of 25mm width is
to be stuck& nails on both side of G.I. wire mesh interior at the
top, bottom & lock rail. An additional 5mm thick PVC strip of
20mm width is to be stuck on the interior side of the ‘C’ channel
using PVC solvent cement adhesive etc. complete as per direction
of Engineer-in-charge, manufacturer’s specification & drawings
Providing and fixing “RAJSHRI” PVC door cladding to the flush
doors shutters. For the new doors it shall be pasted with Fevicol
BMT-
689 SSR 998 or nailed to the old doors. complete as per direction of 1 sqm 377 25.25
N.09
Engineer –in – charge, manufacturers specification and drawing -
1 mm thick
BMT-
N.10
1.5 mm thick
BMT-
N.11
2.0 mm thick
BMT- Flush door shutters, solid bond wood block board type with teak
692 1 sqm 1,630.00 28.85
N.12 ply on both faces.: 25 mm thick conforming to IS:2202
693 1 sqm 1,712.00 28.82
694 1 sqm 1,835.00 28.77
Flush door shutters, solid bond wood block board type with
BMT-
695 commercial ply on both faces.: 25 mm thick conforming to 1 sqm 961 28.82
N.15
IS:2202
BMT-
N.16
IS:2202
BMT-
N.17
IS:2202
44
Total
Buildings Embedded
(%)
BMT-
698 commercial ply on both faces.: 40 mm thick conforming to 1 sqm 1,294.00 28.76
N.18
IS:2202
Flush door shutters, solid bond wood block board type with teak
BMT-
699 veneer on one face and commercial ply on another face (lipping): 1 sqm 1150 28.78
N.19
20 mm thick conforming to IS:2202
BMT-
700 veneer on one face and commercial ply on another face (lipping): 1 sqm 1,319.00 28.81
N.20
BMT-
N.21
BMT-
N.22
BMT-
N.23
Supply and fixing of E-board door shutter with all-round style “U”
lipping size 15 x 18 x 15 mm made from 0.8 mm thick powder
coated cold rolled steel profiles with 16 mm thick E-board with
necessary screws fixed at 1’-0” interval 250 mm long Aldrops 2
BMT-
704 Nos. M.S. nickel coated 250 mm long 1 No. M.S. Tower bolts 1 Sqm. 1,180.00 25.27
N.24
including cost and conveyance of all materials at site and
applying 1 coat of primer, 2 coats of luppum and 2 coats of
synthetic enamel paint as per approved design for finished item
of work.
Providing and fixing frame made from 1.2 mm powder coated
cold rolled steel profiles of overall section size of 60 mm x 45 mm
with 21 mm rivet for shutter with necessary stiffeners hinges
and screws. E-board shutter with around Ù’ lipping of size 15 X
18 X 15 mm made from 0.8 mm thick CRCA powder coated steel
BMT-
705 profile with 16 mm thick E-board with necessary screws fixed at 1 Sqm. 1,799.00 25.19
N.25
every 1’-0” interval 250 mm long Aldrops 2 Nos. MS Nickel
coated 250 mm long 1 No. MS tower bolt including cost and
conveyance. One coat of primer, 2 coats of luppum and 2 coats of
synthetic enamel paint as per approved colour, labour charges
etc.
Supply and fixing of BISONPANEL(IS 14276) cupboard frames
and shutters and using 16mm BISON PANEL duly painted both
sides with one coat of primer and two coats of synthetic / enamel
paint of approved shade and brand including fixing of hardware
BMT- like M.S. powder coated Piano hinges of size 18mm x 18mm,
706 1 sqm 2,152.00 25.19
N.26 brass ball catches, Aluminium tower bolts and handles , Godrej
locks, Fevicol, screws and nails including cost and conveyance of
all materials, labour charges, all incidental and operational
charges etc., complete for finished item of work at site as per the
directions of Engineer in Charge.
45
Total
Buildings Embedded
(%)
Supply and fixing BISONPANEL (IS 14276) single door shutter

using with 16MM BISONPANEL with all-round "U" section of size
12mmx18mmx12mm made from 0.6 mm thick galvanized,
colour quoted cold rolled steel profiles with necessary screws
BMT- fixed at every 304.8 mm intervals. The cost inclusive of MS Nickel
707 1 Sqm 1,813.00 25.21
N.27 coated Aldrops of size 255 mm long 2 Nos., 200 mm long tower
bolts 1 No., 125 mm handles 2 Nos. 300 mm long "T" hinge cost
and conveyance of all materials at site and applying 1 coat
primer, 1 coat of luppum and 2 coats of synthetic enamel paint as
per approved design for finished item of work.
Supply and fixing of BISON PANEL(IS 14276) door shutters using
with 16MM BISONPANEL with all round style “U” size of
20mmx18mm x20mm made from 0.6mm thick galvanized pre-
painted cold rolled steel profiles with BISONPANEL separating
two shutter with 30mmx18mmx30mm Stepped lipping with
BMT- necessary screws fixed at every 1’-0” (304.8mm) intervals. Ms
708 1 Sqm 2,461.00 25.18
N.28 Nickel coated 250 mm long Aldrops 2 no’s, MS powder coated
250mm long tower bolt 2no’s , & 2no’s MS powder coated 125
mm long grip handle. Including cost and conveyance of all
materials at site and applying one coat of primer, 2 coats of
luppum and 2 coats of synthetic enamel paint as per approved
design for finished item of work.
Supply and fixing of BISON LAM single door shutter using 16MM
BISONLAM with all round section “U” size of mm thick galvanized
pre-painted cold rolled steel profiles BISON LAM with necessary
screws fixed at every 1’0” ( 304.8mm) intervals. The cost
BMT-
709 inclusive of MS Nickel coated 250mm long Aldrops 2 no’s , MS 1 Sqm 2,142.00 25.19
N.29
powder coated 250mm long tower bolt 1 no’s, 2no’s MS powder
coated 125mm long grip handle, 1 no’s M.S.P.C. Door stopper.
Including cost and conveyance of all materials at site labour
charges etc., complete finished item of work.
Supply and fixing of BISON LAM double door shutter using
16MM BISONLAM with all round “U” section size of 20mm x
18mm x 20mm made from 0.6mm thick galvanized pre-painted
cold rolled steel profiles with BISON LAM separating two shutter
BMT- with 30mm x 20mm x 30mm stepped lipping with necessary
710 1 Sqm 2,777.00 25.2
N.30 screws fixed at every 1’0” (304.8mm) intervals. The cost
inclusive of MS Nickel coated 250mm long Aldrops 2no’s, MS
powder coated 125mm long grip handle, 2 no’s M.S.P.C. Door
stopper. Including cost and conveyance of all materials at site
labour charges etc., complete finished item of work.
46
Total
Buildings Embedded
(%)
Doors Frames (Colour Coated Steel Sections) & Shutter using

Cement Bonded Particle Board as per IS 14276 (Bison Panel or
equivalent): Providing and fixing of door frame made from cold
roll formed sections made of galvanized (Base steel as per IS277
with zinc of 120 Grams/sqm) colour coated steel sections with
total coated thickness of 1mm, primer coated with epoxy primer
coat of 5-7 microns thick, finish paint with polyester paint of 12-
16 microns. The Section for door frame is to be filled with
polyurethane (P.U) form of 40kg/m3. Overall size of frame
section should be of 50mm x 50mm. With necessary corner
BMT- brackets, stiffeners, hinges, and screws. Cement Bonded particle
711 1 Sqm 3,178.00 25.22
N.31 board shutter (Bison Panel or equivalent ) “Single Leaf” with all
round styles “U” section of size 12m x 18m x 12mm made from
0.6 mm thick galvanized, colour coated cold rolled steel profiles
with 16mm thick Cement Bonded particle Board (Bison Panel or
equivalent ) with necessary screws fixed at every 1’-0”
(304.8mm) intervals. The cost inclusive of MS nickel coated
Aldrops of size 250mm long 2nos. 200mm long tower bolt 1no.,
125mm handles 2nos., cost and conveyance of all materials at
site and applying one coat primer , one coat of luppum and two
coats of synthetic enamel paint as per approved design for
finished item of work
Supply and fixing of BISONPANEL (IS 14276) box type cupboard
using BISONPANEL for making frame of size 100mm x 35mm
using two sandwiched 16MM boards, one BISONPANEL and one
BISONLAM with plain 35mm wood lipping. The Shutters are
BMT- made of 16MM thick BISONLAM (Pre-Laminated Cement Bonded
712 1 Sqm 3,447.00 25.21
N.32 Particle Board) of approved shade inclusive of hardware like M.S.
powder coated Piano hinges of size ¾” x ¾” , Aluminium powder
coated handles of size 4” (101.6mm), Aluminium tower bolt 4”
(101.6mm) Godrej locks, screws, wood lipping and Fevicol etc.,
complete finish item of work.
Supply and fixing of BISONLAM door shutter made out of U
sections of size 12x14x12 made from 0.6mm thick pps sections
with 12MM BISONLAM with necessary screws fixed at every
BMT-
713 1’.0”interwells. The hardware consists of 250mm long Aldrops – 1 Sqm 2,139.00 25.23
N.33
2 Nos.150mm Handle- 1 No, 150 mm long ms powder coated
tower bolt 1 no. nickel coated. The cost is inclusive of all
incidentals, labour transportation charges.
Supply and fixing of V- Board door shutter with around style “U”
coated cold rolled steel profiles with 16 mm thick V-board with
necessary screws fixed at 1’-0” interval 250 mm long Aldrops 2
BMT-
714 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower Bolts 1 Sqm 1,500.00 25.21
N.34
Including cost and conveyance of all materials at site and
applying 1 coat of primer, 2 coats of luppum and 2 coats of
synthetic enamel paint as per approved design for finished item
of work.
47
Total
Buildings Embedded
(%)

and screws. V- Board shutter with around style “U” lipping of size
15 x 18 x 15 mm made from 0.8 mm thick CRCA powder coated
BMT-
715 steel profile with 16 mm thick V-board with necessary screws 1 Sqm 1,767.00 25.23
N.35
fixed at every 1’-0” interval 250 mm long Aldrops 2 nos. M.S.
nickel coated 250 mm long 1 no. M.S. Tower Bolts Including cost
and conveyance. One coat of primer, 2 coats of luppum and 2
coats of synthetic enamel paint as per approved colour, labour
charges etc.
Supply and fixing Sintex or equivalent doors are made out of PVC
section and panels. The overall dimension of the same is 33mm X
47mm with usual process variation and having a wall thickness
BMT-
716 of 1.5mm with a variation of ± 0.3mm. The infill is seamless Sqm. 2,161.00 25.2
N.36
hallow multi chambered PVC single panel having an effective
dimension of 762mm X 20mm having a wall thickness of 1mm ±
0.3mm complete, for finished item of work.
Supply and fixing PVC door frames made from extruded sections
BMT- in overall dimensions of 40 X 48mm having a wall thickness of
717 1 RM. 244 25.13
N.37 1.5mm with usual process variation of ± 0.3mm, complete, for
Supply and fixing of V-board wall panelling (water, fire and
termite resistant) with frame work made of GI stud profile of size
48 x 40 x 10 x 0.6 mm thick placed at every 610 mm C/C intervals
fixed vertically in between floor and roof ‘U’ track of size 50 x 30
BMT-
718 mm thick V- Board / Cladded around with self tapping self 1 Sqm 921 25.14
N.38
embedding screws fixed at every 300 mm (centres) leaving a 3
mm gap between two panels of width 2’-0”. The Gap will be
covered with a decorative beading. Surface will be given a
smooth finish over a coat of primer. Inclusive of all taxes: With 8
mm V- Board
Supply and fixing double skin V- Board partition with Frame
work made of GI stud profile of size 48x40x 10x 0.6 mm thick
placed at every 610 mm C/C intervals and 915 mm horizontal
intervals duly fixed with self expansion screws, the V- Board of 8
mm thick cladded around with self tapping self embedding
BMT-
719 screws fixed at every 300 mm (centres) leaving a 3 mm gap 1 Sqm 1,392.00 25.18
N.39
between two panels of width 2’-0” (610 mm). The Gap will be
covered with a decorative moulding surface will be given a
smooth finish over cement primer. The rate Inclusive of cost and
conveyance of all materials and labour charges etc., Complete.
DOUBLE SKIN PARTITION
Supply and fixing of PVC cupboards for kitchen and bedrooms
shall be made out of multi chambered PVC sections having
overall dimensions of 20 X 762mm with a wall thickness of
BMT- 1.2mm ± 0.3mm. The cabinets shall be made as per the
720 1 Sqm. 4,338.00 11.43
N.40 requirements of the room with groove system. The PVC section
surface shall be plain and laminated finish to have good look,
completed, for finished item of work for SINTEX OR equivalent
PVC CABINETS
48
Total
Buildings Embedded
(%)
Supply and fixing of Sintex Frontura door shutter consisting of

Sintex make or equivalent FRP (Fibre Reinforced Plastic) panels
on either sides with depressed panelled design for door having
overall wall thickness of 1.5mm + 0.35 mm with usual process
variation. The core of the door shutter shall be filled with
Polyurethane foam (PUF) injected with the help of Hydraulic
BMT-
721 Injection method, wooden black of 35mm x 31mm shall be 1 Sqm. 3,342.00 25.22
N.41
provided on all four side of the door shutter. Necessary wooden
blacks shall be provided to take up necessary hard ware’s and
fixtures etc. with steel wire mesh at the centre of the door the
rate inclusive of all taxes and finished item work. Max size:
838mm (W) x 2060mm (H) Colour GOLDEN BROWN. SINTEX
FRONTURA DOOR SHUTTER (25MM THICK)
Supply and fixing of Sintex door shutter made from specially hot
press moulded SMC (Sheet moulding compound) sheet polythen
core and PVC Frame section. SMC sheets shall be made from SMC
confirming to IS-`13410 sheets shall have an average thickness of
1.4mm+/- 0.35mm on both sides. Core of the door shall be filled
with high density polyurethane foam injected with the help of
hydraulic injection method shutter frame to be made of PVC
Extruded section of 26mm x 47mm with a wall thickness of
1.4mm+/-0.3mm on both sides corresponding to Sintex code
BMT-
722 DWUF 305 the hardware location shall be reinforced with special 1 Sqm. 3,642.00 25.2
N.42
polymeric reinforcement wooden blocks of suitable size. The
corners of the shutter frame shall be reinforced with polymeric L
shaped angle size of 105 x 230mm corresponding Sintex code PR-
02 the lock rail shall be made from PVC Extruded sections having
overall dimensions of 26mm x 47mm x 1.4mm +/- 0.3mm on
both sides. The usual process of variation corresponding Sintex
code of 305 combining two nos. wooden pieces are inserted on
the periphery suitable M.S. Tube reinforcement shall be provided
on the one vertical side of shutter frame
49
Total
Buildings Embedded
(%)
Supply and fixing of Sintex Door shutter made from specially Hot
Press Moulded SMC (Sheet moulding compound) sheets,
Polyurethane core and PVC Frame section SMC sheets shall be
made from SMC conforming to IS-13410 sheets shall have an
average thickness of 1.4 mm +/- 0.35 mm on both sides. Core of
the door shutter shall be filled with high density polyurethane
foam, injected with the help of hydraulic injection method
shutter frame to be made of PVC extruded section conforming to
IS: 10151: 1982 of size 26 mm x 46 mm with a wall thickness of
1.4 mm +/- 0.3 mm on both sides corresponding to Sintex code
BMT- DWUF 305. The hardware locations shall be reinforced with
723 1 Sqm. 3,162.00 25.23
N.43 special polymeric reinforcement wooden blocks of suitable size.
The corners of the shutter frame shall be reinforced with
Polymeric ‘L’ shaped angle of size 105mm x 230mm
corresponding to Sintex code PR-02 the lock rail shall be made
from PVC extruded sections having overall dimensions of 26 mm
x 46 mm 1.5 mm +/- 0.3 mm on both sides, with usual process
variation corresponding to Sintex code 305 combining two
numbers. Wooden pieces are inserted on the periphery. Suitable
MS Tube reinforcement shall be provided on vertical sides of
shutter frame the rate inclusive of all taxes and finished item
work Colour: White & Grey
BMT-
724 SINTEX ENDURA DOOR SHUTTER (26MM THICK) 1 Sqm. 1,682.00 28.79
N.44
Supply and fixing of door shutters made of rigid PVC extruded
hollow section (Nandi or equivalent) of 20mm X 200 mm with
the wall thickness of 1.0mm +/- 0.1mm equally divided into 4
no's with tongue and groove locking arrangements. The shutter
frame is made of 30mm X 79mm with the wall thickness of
BMT-
725 1.5mm +/-0.15mm section mitre-cut and joined at 4 corners with Sqm. 1,923.00 25.2
N.45
125mm X 225mm plastic brackets. The shutter shall be
horizontally reinforced with 2 no's of 8mm PVC rods. Teak wood
batons shall be reinforced inside the door shutter during the
fabrication of the door shutter at those points wherever the
hardware is fixed onto the door shutter.
Supply and fixing of door frame made of hollow extruded PVC
section (Nandi or equivalent) having dimensions of 40 X 57mm
BMT- with the wall thickness of 2mm +/- 0.2mm duly reinforced with
726 1 RM 254 25.12
N.46 seasoned wood plank at the hinges side. The door frame top 2
corners shall be metre-cut/ welded. PVC DOOR FRAME (Nandi or
equivalent )
Supply and fixing of door frame made of hollow extruded PVC
section (Nandi or equivalent) having dimensions of 40 X 46 mm
BMT-
727 with the wall thickness of 2mm +/- 0.2mm duly reinforced with 1 RM 200 25
N.47
seasoned wood plank at the hinges side. The door frame top 2
corners shall be mitre cut/welded
Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof
mesh with std. Spn (S.S.) fly mesh including cost and conveyance
BMT-
728 of all materials, and labour charges etc. complete for finished 1 Sqm 1,108.00 16.02
N.48
item of work.: Single shutter 2'-0" x 4'-0" (609.6x1219.2mm)
shutter section size 20 x 40 mm
50
Total
Buildings Embedded
(%)

BMT-
N.49
item of work.: Double shutter 3'-0" x 4'-0" (914.4 x 1219.2mm)
BMT-
N.50
item of work.: Double shutter 4'-0" x 4'-0" (1219.2 x 1219.2mm)
mesh with Netlon fly mesh including cost and conveyance of all
BMT-
731 materials, and labour charges etc. complete for finished item of 1 Sqm 944 15.97
N.51
work.: Single shutter 2'-0" x 4'-0" (609.6x1219.2mm) shutter
section size 20 x 40 mm
BMT-
N.52
work.: Double shutter 3'-0" x 4'-0" (914.4 x 1219.2mm) shutter
BMT-
N.53
work.: Double shutter 4'-0" x 4'-0" (1219.2 x 1219.2mm) shutter
Supply & fixing of Door frames made of all formed sections of
1.25mm thick CRCA section; size should be 50x60mm with
32mm rebate. The corner of the frame should be welded. The
BMT- frame should be painted with one coat of primer and finished
734 1RM 219 15.87
N.54 painted with pure polyester paint. The frame should be provided
with approved quality butt hinges of 3 Nos. complete for finished
item.: Single shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer
frame section size of 50 x 60 mm
Supply & fixing of Door frames made of all formed sections of
1.25mm thick CRCA section; size should be 50x60mm with
32mm rebate. The corner of the frame should be welded. The
BMT- frame should be painted with one coat of primer and finished
735 1 RM 219 15.87
N.55 painted with pure polyester paint. The frame should be provided
with approved quality butt hinges of 3 Nos. complete for finished
item.: Double shutter 5'-0" x 7'-0" (1524 x 2133.6mm) outer
Supplying & fixing of Door frame made of roll formed section of
1.25 mm thick CRCA section, size should be 50 x 60 mm with 32
mm rebate. The corner of the frame should be welded. The frame
BMT- should be painted with one coat of primer and finished painted
736 1 RM 248 15.89
N.56 with pure polyester paint. The frame should be provided with
approved quality butt hinges of 3 Nos. Complete for finished
item of work.: Single shutter 3'-0" x 7'-0" (914.4x2133.6mm)
outer frame section size of 50 x 75 mm
51
Total
Buildings Embedded
(%)
Supplying & fixing of Door frame made of roll formed section of

1.25 mm thick CRCA section, size should be 50 x 60 mm with 32
mm rebate. The corner of the frame should be welded. The frame
BMT- should be painted with one coat of primer and finished painted
737 1 RM 248 15.89
N.57 with pure polyester paint. The frame should be provided with
approved quality butt hinges of 3 Nos. Complete for finished
item of work.: Single shutter 5'-0" x 7'-0" (1524x2133.6mm)
outer frame section size of 50 x 75 mm
Providing and fixing door frames fabricated from sections made
of galvanized steel powder coated (base steel as per IS 513,
galvanised as per IS 277 with zinc of 120 grams / square metre),
the factory made section are powder coated with pure polyester
powder of 50-60 microns thick with total coated thickness of
1.25 mm, size of door frame section is of 105 x 60 mm with a
rebate of 38 mm to accommodate 35 mm thick door shutter, with
BMT-
738 groove to insert gasket in the frame section, frame section filled 1 RM 703 16.01
N.58
with polyurethane foam, cut to length, and joined by way of
welding, each frame provided with: a) 2mm thick MS powder
coated butt hinges of 100 mm long – 3 Nos. for single shutter, 6
Nos. for double shutter. b) CRCA electroplates stiffeners of 6 Nos.
– 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts
screwed to stiffeners – 6 Nos. with split end tail. d) Nylon Aldrops
Receiver – 1 No. for single shutter frame. e)Tie Rod – 1 No
Providing and fixing of door frames factory made, internal door
frames without threshold, fabricated from pre painted cold roll
formed section 100 mm x 60 mm made of galvanized (base steel
as per IS-513 ‘D’ quality galvanized as per IS-277 with Zinc of 120
Grams/sqm) steel colour coated sections with total coated
thickness of 1 mm primer coated with epoxy primer of 5-7
microns thick finish painted with polyester paint of 12-16
microns and back coated with alkyd backer of 5-7 microns, the
frame section filled with polyurethane (PU Foam) of 40 kg/Cum
BMT-
739 and the sections cut to length and mitre joined by means of 1.25 1 RM 474 15.89
N.59
mm thick CRCA electroplated corner brackets of size 75 x 75 mm
and 1.25 mm thick electroplated stiffeners of size 150 mm for
fixing hold fasts and hinges with MS Powder coated fittings a) 6
Nos M.S. Z Type hold fasts made of 30 mm x 3 mm MS flat of 230
mm long, 3 Nos each size expandable PVC covered screw type
fasteners b) 2.5 mm x 300 mm long ‘T’ hinges /2.5 mm x 50 mm x
50 mm x 100 mm two way but hinges (3 Nos for single leaf or 2
Nos for Double leaf/leaf) c) 12 mm dia MS tie rod at bottom with
necessary size of nuts on either side.
52
Total
Buildings Embedded
(%)
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC)

sliding doors three track - only two glass shutters sliding - 95 -
Series duly manufactured using UPVC reinforced profiles of
95.50 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42 mm
x 2.25 mm for sliding door shutter frames capable of mounting
single glazing system, structurally reinforced with hot dip
galvanized up to 50 microns of minimum thickness of 1.2 mm
BMT- prefabricated & welded through fusion welding the window sash
740 1 sqm 6,394.00 25.2
N.60 shall be fitted with 5 mm thick clear float glass of reputed make
duly fixed with EPDM weathering seal resistant accessories like
clipping locking system made of aluminium 1 No., per set of
sashes and the system is to be installed at the site using anchor
fasteners, silicon rubber sealant, easy glazing/ deglazing at site
etc., including cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site with templates
for casement sizing complete for finished item of work

sliding doors three track - two glass shutters sliding and one
mesh shutter sliding- 95 -Series duly manufactured using UPVC
reinforced profiles of (108 mm x 45 mm)/(95.50 mm x 60 mm) x
2.0 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x
2.0 mm for sliding door shutter frames capable of mounting
prefabricated & welded through fusion welding the window sash
BMT- shall be fitted with 5 mm thick clear float glass of reputed make
741 1 sqm 7,066.00 25.19
N.61 and mesh shutter shall be made of (48.5 mm x 30 mm))/(50 mm
x 26.5 mm) x 2.0 mm uPVC profile section and fitted with
nylon/polymer mesh and rollers/pulley duly fixed with TPV
Gaskets/ EPDM weathering seal resistant accessories like
53
Total
Buildings Embedded
(%)

sliding doors three track - three glass shutters sliding - 112 -
Series duly manufactured using UPVC reinforced profiles of
112.0 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42 mm
x 2.25 mm for sliding door shutter frames capable of mounting
BMT- prefabricated & welded through fusion welding the window sash
742 1 sqm 6,731.00 25.2
N.62 shall be fitted with 5 mm thick clear float glass of reputed make
and fixed with EPDM weathering seal resistant accessories like
openable doors with openable shutters duly manufactured using
UPVC reinforced profiles of 60 mm x 55 mm x 2.0 mm for outer
frames, 70 mm x 60 mm x 2.25 mm for mullion sections as per
the need and 102 mm x 60 mm x 2.0 mm for openable shutter
frame capable of mounting single glazing system structurally
reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion
welding the window sash shall be fitted with 5 mm thick clear
BMT- float glass of reputed make duly fixed with TPV Gaskets/ EPDM
743 1 Sqm 8,009.00 25.2
N.63 weathering seal resistant and accessories for openable door -
hinges of stainless steel grade 304- 3 Nos., per shutter handle
with mazak alloy casting 1 No. per shutter, locking system
suitably concealed 1 No., with raiser wedges for smooth
operation and the system is to be installed at the site using
anchor fasteners, silicon rubber sealant, easy glazing/ deglazing
at site etc., including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site
with templates for casement sizing complete for finished item of
work
Supplying and fixing door shutter, with shutter frame and infill
panel made from PVC material conforming to IS: 10151-1982,
the shutter frame made out of PVC extruded sections having
overall dimension of 47 mm x 33 mm with wall thickness of
1.2mm + 0.3mm with usual process variation, the shutter frame
with tapered shape to provide better grip to the infill panel end
to drain out the water The Infill panel is made out of PVC
BMT-
744 Sections having Overall Dimensions of 200 mm x 20 mm with 1 Sqm 1038 25.21
N.64
wall thickness of 1mm + 0.2mm, the shutter frames mitre cut and
joined at the corner, by providing Polymeric “ L” type corners to
take hardware & fixtures fixed with 10-20mm counter sunk fully
threaded parallel shank steel screws, all the hardware locations
reinforced with special polymeric bars as per drawings, stickers
showing locations of different hardware pasted on the shutter,
the infill panels joined by tongue and groove method.
54
Total
Buildings Embedded
(%)
PVC Door shutter conforming to IS: 10151-1982, the infill panel

made of seamless one piece multi chamber PVC extruded
sections having overall dimensions of 610 mm x 20 mm with wall
thickness of 1mm + 0.2mm with the top and bottom edges of the
BMT-
745 shutter covered with end cap of the size 20 mm x 11 mm with the 1 Sqm 1,235.00 28.78
N.65
door shutter to be reinforced with special polymeric
reinforcements as per drawing for hardware’s and fixtures.
Stickers indicating the locations of hardware will be pasted at
appropriate places.
Providing & Fixing of Scientific Doors with metal door frames
and door shutters made of galvanize steel (base steel as per IS
513 of 0.58 mm thick D quality, galvanized as per IS 277 with
Zinc of 120 GSM)coated with Zinc Phosphate Primer to receive
any paint on site or finished with Thermosetting Polyurethane
paint of Aliphatic Grade providing high levels of scratch
resistance and durability/Epoxy polyester powder for powder
coating paint thickness 50-60 microns (Dry film thickness) outer
BMT-
746 frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 1 Sqm 9,521.00 25.21
N.66
0.80 mm thick galvanized steel sheet pressed (roll formed) for
46mm thick fully flush, double skin door shell seam joints at stile
edges, in-fill of honeycomb Kraft paper used to give the required
rigidity and effective acoustic insulation with 6” Tower bolt – 1
No., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 3
Nos, Mortise Lock of approved quality – 1 No, frames fixed to the
concrete/masonry wall by means of self expanding screws
complete for finished item of work for Single leaf Door
Providing & Fixing of Scientific Doors with metal door frames
and door shutters made of galvanize steel (base steel as per IS
513 of 0.58 mm thick D quality, galvanized as per IS 277 with
Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive
any paint on site or finished with Thermosetting Polyurethane
paint of Aliphatic Grade providing high levels of scratch
resistance and durability/Epoxy polyester powder for powder
coating paint thickness 50-60 microns (Dry film thickness) outer
BMT-
747 frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 1 Sqm 10,156.00 25.21
N.67
0.80 mm thick galvanized steel sheet pressed (roll formed) for
46mm thick fully flush, double skin door shell seam joints at stile
edges, in-fill of honeycomb Kraft paper used to give the required
rigidity and effective acoustic insulation with 6” Tower bolt – 2
Nos., 6” D handles – 2 Nos., 10” Aldrops – 1 No., Butt Hinges – 6
Nos, Mortise Lock of approved quality – 1 No, frames fixed to the
concrete/masonry wall by means of self expanding screws
complete for finished item of work for Double leaf Door
Moulded panel solid core flush doors using water-resistant
BMT-
748 hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick of 1 Sqm 1,934.00 28.85
N.68
Masonite or equivalent doors - 30 mm thick
Moulded panel solid core flush doors using water-resistant
BMT-
749 hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick 1 Sqm 2,114.00 28.82
N.69
Masonite or equivalent doors - 35 mm thick
BMT- Solid core membrane flush doors using rigid PVC membrane of
750 1 Sqm 1,571.00 28.77
N.70 0.3 mm thick of different elegant shades doors - 30 mm thick
55
Total
Buildings Embedded
(%)
BMT- Solid core membrane flush doors using rigid PVC membrane of
751 1 Sqm 1,739.00 28.81
N.71 0.3 mm thick of different elegant shades doors - 35 mm thick
Providing & fixing 30 mm thick solid panel PVC door shutter

consisting of frame made out of 19 gauge M.S tube of 19 x 19 mm
for stiles, top & bottom rail, with a coat of primer of approved
make. M.S. Frame covered with 5 mm thick heat moulded PVC
“C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75
mm wide PVC sheet for top, lock & bottom rail on either side 20
BMT-
752 mm wide cross PVC sheet as gap insert for top & bottom rail, 1 Sqm 3,030.00 25.21
N.72
panelling of 10mm(+/-)( 5mm+5mm)” thick PVC sheet fitted in
the M.S. frame welded /sealed to the stiles, on either side joined
together with solvent cement adhesive etc., additional 5 mm
thick PVC strip of 20 mm width stuck on the interior side of the C
channel using solvent cement, complete as per direction of
Engineer–in–charge, manufacturers specification.
Supply & Fixing SOLID STEEL DOOR door shutter made out of G I
Sheet with an average wall thickness of 0.35 mm on both sides.
MS Tube having dimensions of 19 x 19 mm is inserted along the
hinge side of the door, core of the door shutter filled with High
BMT-
753 Density Polyurethane foam injected with the help of hydraulic 1 Sqm 1,480.00 25.21
N.73
injection method, four sides of the door covered with G I Sheet
and the hardware locations reinforced with suitable wooden
blocks as per drawing and stickers indicating location of the
hardware pasted at appropriate places, etc complete
Supplying & fixing SINGLE PANEL 30 mm thick PVC DOOR, door
shutters with shutter frame and Infill panel made from PVC
material, the shutter frame made out of PVC extruded sections
having overall dimensions of 6 0mm x 30 mm with wall thickness
of 1.3 mm ± 0.3 mm, with the Infill panel made out of multi
BMT-
754 chambered seamless hollow PVC extruded panel having overall 1 Sqm 2,604.00 25.19
N.74
dimensions of 610 mm x 20 mm having wall thickness 1 mm ±
0.2 mm with the shutter frame meter cut and joined at corners
and all the hardware locations reinforced with special polymeric
bars as per drawing including providing special PVC bracket on
hinge side, etc complete
BMT-
755 deleted
N.75
Providing & fixing internal prelaminated PVC door frame of size
100 x 45 mm with a wall thickness of 5mm, made of extruded 5
mm Prelam PVC foam sheet, mitred cut at two corners and joined
with two nos. of 150mm long brackets of 15 x 15 mm MS square
tube, two vertical door profiles reinforced with 40 x 20 MS Tube
BMT-
756 of 19 gauge throughout the frame and the door frame fixed to the 1 RM 601 25.21
N.76
wall using 65/100mm long MS screws through the frame by
using PVC fasteners with a minimum of 3 nos of screws provided
for each vertical member and two nos. for horizontal, etc
complete as per drawing and direction of Engineer in
Charge
56
Total
Buildings Embedded
(%)
Supply & Fixing of Powder Coated Mild Steel doors, frames &
shutters made of Skin pass galvanized Iron sheet conforming to
Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277
with Hot Zinc Coating of 120 grams / Sq.Mtr with powder coating
of thickness 60-65 Microns, frame with 1.2mm thick Skin pass
Galvanized Iron sheet formed to single rebate profile of size 100
mm X 58 mm and filled with in-fill Polyurethane foam, the Door
Shutters are with 0.80 mm thick Skin pass Galvanized Iron Sheet
formed to provide a 46 mm thick fully flush, double skin door
shell with Lock Seam joints at stile edges, fitted with in-fill of
BMT- Honeycomb Kraft Paper and coated with polyester powders of
757 1 Sqm 11,139.00 25.2
N.77 Pure polyester/ epoxy polyester or polyurethane powder for
powder coating of thickness 60 – 65 microns and are coated
with Zinc Phosphate Primer to receive any paint on site or
finished with Thermosetting Polyurethane paint of Aliphatic
Grade providing high levels of scratch resistance and durability,
the Shutter provided with 6 MM clear float vision glass in
Circular, Square or Rectangular shapes, Stainless Steel Ball
Bearing Butt Hinges 3 mm thick fixed flush to the frame and
shutter (Profile 102x76x3mm thick).Mortise Sash Lock with
Lever Handles, Mortise Dead Bolt, etc for industrial, commercial,
residential, clean room applications
Supply & Fixing of Stainless steel doors, frames & shutters made
of stainless steel grade 304 of hairline finish, frame with 1.2mm
thick formed to single rebate profile of size 100 mm X 58 mm and
filled with in-fill Polyurethane foam, the Door Shutters are with
0.80 mm thick Stainless steel Sheet formed to provide a 46 mm
thick fully flush, double skin door shell with Lock Seam joints at
BMT-
758 stile edges, fitted with in-fill of Honeycomb Kraft Paper, the 1 Sqm 20,886.00 25.21
N.78
Shutter provided with 6 MM clear float vision glass in Circular,
Square or Rectangular shapes, Stainless Steel Ball Bearing Butt
Hinges 3 mm thick fixed flush to the frame and shutter (Profile
102x76x3mm thick).Mortise Sash Lock with Lever Handles,
Mortise Dead Bolt, etc for industrial, commercial, residential,
clean room applications
57
Total
Buildings Embedded
(%)
Supply & Fixing of Powder Coated Fire Rated doors, frames &
Galvanized Iron sheet formed to double rebate profile of size 143
mm X 58 mm with maximum bending radius of 1.4 mm and filled
with in-fill Polyurethane foam, the Door Shutters are with 0.80
mm thick Skin pass Galvanized Iron Sheet formed to provide a 46
mm thick fully flush, double skin door shell with Lock Seam joints
at stile edges, fitted with in-fill of Honeycomb Kraft Paper and
BMT-
759 coated with polyester powders of Pure polyester/ epoxy 1 Sqm 13,228.00 25.21
N.79
polyester or polyurethane powder for powder coating of
thickness 60 – 65 microns and are coated with Zinc Phosphate
Primer to receive any paint on site or finished with
Thermosetting Polyurethane paint of Aliphatic Grade providing
high levels of scratch resistance and durability, the Shutter
provided with 6 MM clear float vision glass in Circular, Square or
Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3
mm thick fixed flush to the frame and shutter (Profile
Mortise Dead Bolt, etc for 120 minutes Fire Rated door
conforming to IS:3614 (Part2) 1992
Supply & Fixing of Powder Coated Fire Rated doors, frames &
Galvanized Iron sheet formed to double rebate profile of size 143
mm X 58 mm with maximum bending radius of 1.4 mm and filled
with in-fill Polyurethane foam, the Door Shutters are with 0.80
mm thick Skin pass Galvanized Iron Sheet formed to provide a 46
mm thick fully flush, double skin door shell with Lock Seam joints
at stile edges, fitted with in-fill of Honeycomb Kraft Paper and
BMT-
760 coated with polyester powders of Pure polyester/ epoxy 1 Sqm 12,532.00 25.21
N.80
polyester or polyurethane powder for powder coating of
thickness 60 – 65 microns and are coated with Zinc Phosphate
58
Total
Buildings Embedded
(%)
Supply & Fixing of Stainless steel Fire Rated doors, frames &
shutters made of Stainless steel of 304 grade hairline finish,
frame with 1.2mm thick Stainless steel of 304 grade hairline
finish sheet formed to double rebate profile of size 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with in-
fill Polyurethane foam, the Door Shutters are with 0.80 mm thick
Stainless steel of 304 grade hairline finish Sheet formed to
provide a 46 mm thick fully flush, double skin door shell with
Lock Seam joints at stile edges, fitted with in-fill of Honeycomb
Kraft Paper and coated with polyester powders of Pure
BMT-
761 polyester/ epoxy polyester or polyurethane powder for powder 1 Sqm 20,886.00 25.21
N.81
coating of thickness 60 – 65 microns and are coated with Zinc
Phosphate Primer to receive any paint on site or finished with
Supply & Fixing of Stainless steel Fire Rated doors, frames &
shutters made of Stainless steel of 304 grade hairline finish,
frame with 1.2mm thick Stainless steel of 304 grade hairline
finish sheet formed to double rebate profile of size 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with in-
fill Polyurethane foam, the Door Shutters are with 0.80 mm thick
Stainless steel of 304 grade hairline finish Sheet formed to
provide a 46 mm thick fully flush, double skin door shell with
Lock Seam joints at stile edges, fitted with in-fill of Honeycomb
Kraft Paper and coated with polyester powders of Pure
BMT-
762 polyester/ epoxy polyester or polyurethane powder for powder 1 Sqm 18,209.00 25.21
N.82
coating of thickness 60 – 65 microns and are coated with Zinc
Phosphate Primer to receive any paint on site or finished with
59
Total
Buildings Embedded
(%)
Supply & Fixing of Lead Lined Clean room doors frames and
shutters made of Skin pass galvanized Iron sheet (Conform to
with Hot Zinc Coating of 120 grams / Sq.Mtr).with powder
coating of thickness 60-65 Microns, frame of 1.60mm thick
galvanized steel sheet (Conform to IS 277) formed to
Single/double rebate profile of size 100mm X 58mm/
143x58mm, door frames with a single / multi Layer of Lead sheet
varying thickness from 3mm /1mm to 2mm depends on
radiation level, the shutter with 1.2 mm thick Galvanized Steel
Sheet (Conform to IS 277) formed to provide a 46mm thick fully
BMT- flush, double skin door shell with Lock Seam joints at stile edges
763 1 Sqm 14,995.00 25.21
N.83 with a single / multi Layer of Lead sheet varying thickness from
3mm /1mm to 2mm depends on radiation level, the lead sheets
extend the full width and height of the door, Lead thickness is
equal to the shielding in the adjacent wall, the door frames and
door shutters are coated with polyester powders of Pure
polyester/ epoxy polyester or polyurethane powder for powder
coating of thickness 60 – 65 microns, coated with Zinc Phosphate
high levels of scratch resistance and durability, hardware with
Stainless Steel Ball Bearing Butt Hinges 3 mm thick fixed flush to
the frame and shutter etc complete for finished item
Supply & Fixing of Lead Lined Stainless steel Clean room door
frames and shutters made of Stainless steel grade of 304 hairline
finish, frame with 1.60mm (16SWG) thick hairline finish
Stainless steel grade of 304 formed to Single/double rebate
profile of size 100 mm x 58mm/ 143 x 58 mm, door frames with
a single / multi Layer of Lead sheet varying thickness from 3mm
/1mm to 2mm depends on radiation level, the shutter with 1.2
BMT- mm thick hairline finish Stainless steel grade of 304 formed to
764 1 Sqm 23,671.00 25.2
N.84 provide a 46mm thick fully flush, double skin door shell with
Lock Seam joints at stile edges with a single / multi Layer of Lead
sheet varying thickness from 3mm /1mm to 2mm depends on
radiation level. The lead sheets extend the full width and height
of the door. Lead thickness is to be equal to the shielding in the
adjacent wall. Hardware can be provided with Stainless Steel Ball
Bearing Butt Hinges 3 mm thick fixed flush to the frame and
shutter etc complete for finished item of work
Supply and fixing of V- BOARD (conforming to IS 14862) door
shutter with all-round style “U” lipping size 15 x 18 x 15 mm
made from 0.8 mm thick powder coated cold rolled steel profiles
with 16 mm thick V-BOARD with necessary screws fixed at 1’-0”
BMT-
765 interval 250 mm long Aldrops 2 nos. M.S. nickel coated 250 mm 1 Sqm 1,500.00 25.21
N.85
long 1 no. M.S. Tower Bolts Including cost and conveyance of all
materials at site and applying 1 coat of primer, 2 coats of luppum
and 2 coats of synthetic enamel paint as per approved design for
60
Total
Buildings Embedded
(%)
Supply and fixing of V- BOARD (conforming to IS 14862) 12 mm

thick door shutter of size 6’0” x 2’6” with all-round style “U”
coated cold rolled steel profiles with necessary screws fixed at 1’-
BMT-
766 0” interval 250 mm long Aldrops 2 nos. M.S. nickel coated 250 1 Sqm 1,285.00 25.24
N.86
mm long 1 no. M.S. Tower Bolts Including cost and conveyance of
all materials at site and applying 1 coat of primer, 2 coats of
luppum and 2 coats of synthetic enamel paint as per approved
design for finished item of work.
and screws. V- BOARD (IS 14862) shutter with all-round style “U”
lipping of size 15 x 18 x 15 mm made from 0.8 mm thick CRCA
BMT-
767 powder coated steel profile with 16 mm thick V-board with 1 Sqm 1,767.00 25.23
N.87
necessary screws fixed at every 1’-0” interval 250 mm long
Aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower
Bolts Including cost and conveyance. One coat of primer, 2 coats
of luppum and 2 coats of synthetic enamel paint as per approved
colour, labour charges etc.
Providing, supplying & fixing of glazed 2 Track -2 Panel Sliding
Door made out of multi chambered uPVC sections with TPV
gaskets having isolated drainage and reinforced with Galvanized
Iron profiles throughout the window. The sliding outer frame
having a overall size of 60 x 45 mm with reinforcement of 1 mm
BMT- thickness, super sash with overall size of 39 x 75 mm with
768 1 Sqm 5,684.00 25.2
N.88 reinforcement of 1.5 mm thickness. Glazing bead for fixing of
glass shall be of size 20 x 18mm and coextruded with gasket.
Fibre Glass mesh shall be provided in mesh shutter.
Window/Door shall be provided with 6 mm plain float glass,
standard hardware & multi point locking system of Patio
espagnolette. Wall thickness of frame & sash shall be 2.0 mm
P WINDOWS
61
Total
Buildings Embedded
(%)
Supplying and fixing of WINDOWS with Prelaminated Cement

Bonded Particle boards and Pre-Painted Steel Sections fabricated
from pre-painted Cold rolled formed sections made of galvanized
steel colour coated sections (Base steel as per IS-512 D quality,
galvanized as per IS-277 with Zinc of 120 gram/sqm) with total
coated thickness of 0.58mm primer coated with epoxy primer of
5-7 microns thick, finish painted with polyester paint of 12-16
microns and back coated with alkyd backer of 5-7 microns),
sections for outer frame and centre mullion (duly filled with PU
form of 40 kg/Cum) of 60mm x 50mm, with provision for fixing
glazed shutter and the section for glazed/paneled of size 48 mm
x 25 mm and another section of size 60 mm x 23 mm provided
for separating glazed and paneled portion, the section cut to
length and mitre jointed with plastic corner brackets and with
corner brackets for window outer frames of 50mm x 60mm, the
mullion section fixed to the frame with plastic mullion cap and
stiffener plates of size 60 mm x 50 mm made of 1.25mm thick
CRCA electroplated provided to fix window frames to
concrete/masonry, gasket for fixing glass and 10mm both sides
pre-laminated cement bonded particle board and 5 mm thick
colour pin headed glass provided for glazing and providing guard
bars of 10 mm square rods duly welded at 150 mm pitch to MS
flat section of size 18 mm and 3 mm thick, and fixed to wall by
means of self expansion nylon Cap (75) and electroplated
wooden screws of size 100 mm, together with aluminium
powder coated fittings, A) 75mm long grip handles 1 no per
shutter, B) 75 mm long tower bolts 2 nos. per shutter, C) Heavy
duty SS Pivot hinges 2 nos per shutter, D) MS Powder coated
telescopic stay 1 no per shutter.
Pre Laminated Cement Bonded Particle Board WINDOWS –
BMT-
769 Single shutter 2’0”x4’0” outer frame section size of 50mm x 1 Sqm 4,721.00 25.19
P.01
60mm shutter frame section size of 48mm x 25mm
Pre Laminated Cement Bonded Particle Board WINDOWS
BMT- –Double shutter 3’0” x 4’0” outer frame section size of 50mm x
770 1 Sqm 4,769.00 25.2
P.02 60mm shutter frame section size of 48mm x 25mm mullion
section size of 50mm x 60mm for outer frame
BMT- Double shutter 3’0” x 3’0” outer frame section size of 50mm x
771 1 Sqm 5,206.00 25.2
P.03 60mm shutter frame section size of 48mm x 25mm Mullion
section size of 50mm x 60mm for outer frame.
BMT- Double shutter 4’0”x4’0” outer frame section size of 50mm x
772 1 Sqm 4,721.00 25.19
P.04 60mm shutter frame section size of 48mm x 25mm Mullion
section size of 50mm x 60mm for outer frame.
Centre fixed both side openable shutters 6’0”x4’0” outer frame
BMT-
773 section size 50 mm x 60 mm shutter frame section size of 48mm 1 Sqm 4,240.00 25.22
P.05
x 25mm, Mullion section size of 50mm x 60mm fixed beading
section size of 12mm x 12mm.
62
Total
Buildings Embedded
(%)
Supply and fixing of openable window made out of extruded PVC

section and the outer frame having overall dimensions of 40 x 48
mm with a wall thickness of 1.5 mm and the shutter frame with
BMT-
774 overall dimensions of 26 x 47 mm and wall thickness of 1.2mm ± 1 Sqm. 3,315.00 25.19
P.06
0.3mm provided with 5mm glazing, the centre mullion having
over all dimensions of 25 x 32.5mm ±0.3mm, complete, for
Supply and fixing of two track or three track sliding window with
the outer frame of 58 x 45mm with a wall thickness of 1.2mm ±
BMT- 0.3mm and the sliding shutter frame made of PVC section 57 x
775 1 Sqm. 2,953.00 25.18
P.07 32mm with overall dimensions of 1.5mm ± 0.3mm provided with
5mm glazing including roller bearings and arrestor type handle
cum lock complete, for finished item of work.
Supply and fixing of pre-painted steel windows & top hung and
fixed louvered ventilators made of pre - painted steel (base steel
as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS
277 with zinc of 120 GSM) primer coated with epoxy primer of 5-
7 microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with 5-7 microns thick alkyd
backer, section for outer frame of 46 x 52 mm section and for
shutter of 46 x 46 mm section for mullion 46 x 70 mm, and
section for beading should be 18 x 25 mm and section for
louvered ventilation of 33 x 56 mm Box section and the windows
panelled with 5 mm thick plain float glass & 4 mm pinhead glass
for ventilators with Ethyl propylene Diamine monomer Gasket
(EPDM) and the sections cut to length mitre joined with corner
brocket centre mullions fixed using mullion cap and with handle
made of high grade aluminium powder coated and nylon
receiver, corner brackets made of CRCA with Zinc Phosphate,
Mullion caps made of glass filled nylon, frames fixed to the
concrete /masonry wall by means of self expanding screws
including 10 mm square guard bars with 6" pitch complete for
Windows: Single shutter 2'0 x 4'0 (609.6 x 1219.2 mm ) Outer
BMT-
776 frame section size of 46 x 52 mm shutter frame section size of 46 1 sqm 5,848.00 25.2
P.08
x 46 mm
Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm)
BMT-
777 outer frame section size of 46 x 52 mm shutter frame section 1 Sqm 5,848.00 25.2
P.09
size of 46 x 46 mm
Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm)
BMT-
P.10
size of 46 x 46 mm Mullion section size of 46 x 70 mm
Windows: Double shutter 4'-0" x 4 '-0" (1219.2x12.19.2mm)
BMT-
P.11
size of 46 x 46 mm
Windows: Double shutter 4'-0" x 4 '-0" (1219.2x1219.2mm)
BMT-
780 outer frame section size of 46 x 52 mm shutter frame section size 1 Sqm 6,186.00 25.2
P.12
of 46 x 46 mm Mullion section size of 46 x 70 mm
Windows: Double shutter 4'-6" x 4 '-6" (1371.6x1371.6mm)
BMT-
781 outer frame section size of 46 x 52 mm shutter frame section size 1 Sqm 5,511.00 25.19
P.13
of 46 x 46 mm Mullion section size of 46 x 70 mm
63
Total
Buildings Embedded
(%)
Windows: Centre fixed both side openable shutter 5'-0" x 4'-0"

BMT- (1524x1219.2mm) outer frame section size of 46 x 52 mm
782 1 Sqm 5,511.00 25.19
P.14 shutter frame section size of 46 x 46 mm Mullion section size of
46 x 70 mm fixed beading section size of 18 x 25 mm
BMT- (1828.8x1219.2mm) outer frame section size of 46 x 52 mm
783 1 Sqm 5,511.00 25.19
BMT- (1828.8x1371.6mm) outer frame section size of 46 x 52 mm
784 1 Sqm 5,511.00 25.19
Ventilators: Top Hung 2 '-0" x 2'-0" (609.6x609.6mm) outer
BMT-
785 frame section size of 46mm x 52 mm shutter frame section size 1 Sqm 6,411.00 25.21
P.17
of 46mm x 46 mm
BMT-
786 frame section size of 46 x 52 m shutter frame section size of 46 x 1 Sqm 6,411.00 25.21
P.18
46 mm Mullion section size of 46 x 70 mm
BMT-
787 frame section size of 46 x 52m m shutter frame section size of 46 1 Sqm 6,411.00 25.21
P.19
x 46 mm Mullion section size of 46 x 70 mm
BMT- Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box
788 1 Sqm 4,386.00 25.21
P.20 section) outer frame section size of 33 x 56 mm
Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box
BMT-
789 section) outer frame section size of 33 x 56 mm Mullion section 1 Sqm 4,386.00 25.21
P.21
size of 33 x 56 mm
Ventilators: Fixed louvers 4'-0" x 3'-0" (1219.2 x 914.4 mm) (Box
BMT-
790 section) outer frame section size of 33 x 56 mm Mullion section 1 Sqm 4,386.00 25.21
P.22
size of 33 x 56 mm
Providing and fixing of Openable Windows made of pre-painted
steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per
IS 277 with Zinc of 120 GSM), primer coated with epoxy primer
of 5-7 microns thick, finish painted with a polyester paint of 12-
16 microns thick and back coated with 5-7 microns thick alkyd
backer and section for outer frame of 48 x 50 mm, centre mullion
of 48 x 50 mm, section for shutter of 48 x 25 mm and the fixed
glass beading section should be 12 x 12 mm and the outer frame
and mullions to have rebate for glazed shutter with a 20 mm
provision for guard bars/grills and the sections cut to length
metre joined with corner bracket, centre mullion fixed with
mullion cap, handle, stay, 2 nos. of stainless steel heavy duty
pivot hinges provided per shutter and windows fitted with 5 mm
thick plain float glass with rubber gaskets including fixing the
frames in concrete/masonry wall by means of self expanding
screws, Including 10mm Square guard bars with 6” (152.4mm)
pitch etc., complete for finished item of work.
Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer
BMT-
791 frame section size of 48x50mm shutter frame section size of 48 x 1 Sqm 5,343.00 25.22
P.23
25 mm.
Double shutter Window with vertical mullion 3’0” x 4’0” (
BMT- 914.4mm x 1219.2mm) outer frame section size of 48x50mm
792 1 Sqm 5,680.00 25.19
P.24 shutter frame section size of 48 x 25 mm. Mullion section size of
48x50mm.
64
Total
Buildings Embedded
(%)
Double shutter Window with vertical member4’0” x 4’0”

BMT- (1219.2mm x 1219.2mm) outer frame section size of 48x50mm
793 1 Sqm 5,680.00 25.19
P.25 shutter frame section size of 48 x 25 mm and mullion section
should be of 48x50mm.
Centre fixed both side openable shutter window 5’0”x4’0”
BMT- (1524mm x1219.2mm). Outer frame section size of 48x50mm.
794 1 Sqm 5,005.00 25.22
P.26 Shutter frame section size of 48 x 25 mm. Mullion section size of
48x50mm. Fixed beading section size of 12x12mm.

BMT- (1828.8mm x1219.2mm). Outer frame section size of 48x50mm.
795 1 Sqm 5,005.00 25.22
48x50mm. Fixed beading section size of 12 x 12mm.
Providing & Fixing of Openable Windows with Fly-mesh made of
pre-painted steel (Base Steel as per IS 513 of 0.58 mm thick
galvanized as per IS 277 with zinc of 150 GSM) primer coated
with epoxy primer of 5-7 microns thick, finish painted with a
polyester paint of 12-16 microns thick and back coated with 5-7
microns thick alkyd backer and the section for outer frame of 72
x 55mm, centre mullion of 72 x 50mm, section for fixed glass
beading section of 12 x 12 mm and section for shutters of 48 x 25
mm and outer frame & mullion sections with rebate for glazed
shutters, fly mesh and a 20 mm provision for guard bars/grills
and fly mesh shutter section of 20 x 40 mm and the sections cut
to length metre joined with corner bracket, centre mullions fixed
with mullion cap, stay, handles, latch 2 Nos of heavy duty
stainless steel pivot hinges per shutter and panelled with 5mm
thick plain float glass and S.S. Mesh for fly mesh shutter (304
grade), fitted using rubber gaskets including fixing the windows
in the concrete/masonry wall by means of self expanding screws,
including 10mm Square guard bars with 6” (152.4mm) pitch ,
complete for finished item of work
Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer
BMT-
796 frame section size of 72x50mm shutter frame section size of 48 x 1 Sqm 7,085.00 25.2
P.28
25 mm.
Double shutter Window with vertical mullion 3’0” x 4’0” (
BMT- 914.4mm x 1219.2mm) outer frame section size of 72x50mm
797 1 Sqm 7,423.00 25.2
P.29 shutter frame section size of 48 x 25 mm. Mullion section size of
72x50mm.
Double shutter Window with vertical member4’0” x 4’0”
BMT- (1219.2mm x 1219.2mm) outer frame section size of 72x50mm
798 1 Sqm 7,423.00 25.2
P.30 shutter frame section size of 48 x 25 mm and mullion section
should be of 72x50mm.
BMT- (1524mm x1219.2mm). Outer frame section size of 72x50mm.
799 1 Sqm 6,748.00 25.19
72x50mm. Fixed beading section size of 12 x 12 mm.

BMT- (1828.8mm x1219.2mm). Outer frame section size of 72x50mm.
800 1 Sqm 5,905.00 25.21
72x50mm. Fixed beading section size of 12 x 12 mm.
65
Total
Buildings Embedded
(%)
Providing and Fixing Pre-painted steel Sliding Window

fabricated from Roll formed sections made of galvanized Steel
colour coated/powder coated (Base Steel as per IS 513 ‘D’
quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr)
with total coated thickness of 0.58 mm, primer coat with epoxy
primer of 5-7 microns thick, finish painted with a polyester paint
of 12-16 microns thick and back coated with Alkyd backer of 5-7
microns or powder coated with pure polyester powder up to 50-
60 microns thick and the section for external frame bottom of 79
BMT- x 44 mm, external frame sides and top of 69 x 24 mm, guide for
801 1 sqm 6,281.00 0
P.33 top and bottom of 69 x 26 mm (Stainless Steel) and section for
shutter of 26 x 30 mm and panelled with 5mm thick plain float
glass fitted with corner bracket for internal and external frame
made of glass filled nylon, gaskets made of Ethyl Propylene
Diamine Monomer (EPDM), sections cut to length, joined and
assembled by means of corner bracket, including fixing windows
in the concrete/masonry walls by means of self expanding
brackets & screws including 10mm square guard bars with 6”
pitch (152.4mm) and all taxes etc., complete for finished item of
work
BMT-
802 deleted
P.34
BMT-
803 deleted
P.35
BMT-
804 deleted
P.36
BMT-
805 deleted
P.37
BMT-
806 deleted
P.38
BMT-
807 deleted
P.39
BMT-
808 deleted
P.40
BMT-
809 deleted
P.41
BMT-
810 deleted
P.42
BMT-
811 deleted
P.43
BMT-
812 deleted
P.44
BMT-
813 deleted
P.45
BMT-
814 deleted
P.46
BMT-
815 deleted
P.47
BMT-
816 deleted
P.48
BMT-
817 deleted
P.49
BMT-
818 deleted
P.50
66
Total
Buildings Embedded
(%)
BMT-
819 deleted
P.51
BMT-
820 deleted
P.52
BMT-
821 deleted
P.53
BMT-
822 deleted
P.54
BMT-
823 deleted
P.55
BMT-
824 deleted
P.56
BMT-
825 deleted
P.57
BMT-
826 deleted
P.58
Supply & fixing of fly mesh shutters of size 20x40mm fly proof
mesh with std. Spn (S.S) fly mesh including cost and conveyance
BMT-
827 of all materials, and labour charges etc. Complete for finished 1 Sqm 1,125.00 25.14
P.59
item of work including of all taxes. : Single shutter 2’-0” x 4’-0” (
609.6 x 1219.2mm) Shutter section size 20 x 40mm
BMT-
P.60
item of work including of all taxes. Double shutter 3’-0” x 4’-0”
(914.4 x 1219.2mm) shutter section size 20 x 40mm
BMT-
P.61
item of work including of all taxes. Double shutter 4’-0” x 4’-0”
(1219.2 x 1219.2mm) shutter section size 20 x 40mm
Supply & fixing of fly mesh shutters of size 20 x 40 mm fly proof

BMT-
P.62
work including of all taxes. Single shutter 2’-0” x 4’-0” (609.6 x
1219.2mm) shutter section size 20 x 40mm

BMT-
P.63
work including of all taxes. Double shutter 3’-0” x 4’= 0” ( 914.4 x
1219.2mm) shutter section size 20 x 40 mm

BMT-
P.64
work including of all taxes. Double shutter 4’-0” x 4’-0” (1219.2 x
1219.2 mm) shutter section size 20 x 40 mm
67
Total
Buildings Embedded
(%)
Supply and fixing fly mesh window with sections made of pre
painted steel (Base steel as per IS 513 of ‘D’ quality, Galvanized as
per IS 277 with zinc of 120 GSM), primer coated with epoxy
of 12 to 16 microns thick and back coated with 5-7 microns thick
alkyd baker with total coated thickness of 0.58 mm for shutter
frame and 0.8 for outer frame, the section for outer frame of 30 x
BMT- 30 mm and fly mesh shutter section of 20 x 40mm outer frame
833 1 Sqm 4,553.00 25.22
P.65 sections with rebate for fly mesh shutters and sections cut to
length metre jointed with corner bracket and fitted with
aluminium ‘T’ section of double shutter & above, SS fly mesh
shutter (304 grade) and EPD gasket including fixing the frames
in the concrete/ masonry wall by means of left expending screws,
latch, 2 nos of heavy duty GI pivot hinges provided per shutter
(304 grade) including all taxes complete for finished item of
work.
sliding windows two track sliding duly manufactured using UPVC
reinforced profiles of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.0
mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.0
mm for sliding shutter frames capable of mounting single glazing
system, structurally reinforced with hot dip galvanized up to 50
microns of minimum thickness of 1.2 mm prefabricated &
BMT- welded through fusion welding the window sash shall be fitted
834 1 Sqm 6,391.00 25.22
P.66 with 5 mm thick clear float glass of reputed make duly fixed with
TPV Gaskets/ EPDM weathering seal resistant accessories like
locking system 1 No., per set of sashes and the system is to be
installed at the site using anchor fasteners, silicon rubber sealant,
easy glazing/ deglazing at site etc., including cost and conveyance
of all materials, accessories, labour charges for transportation,
erection at site with templates for casement sizing complete for
sliding windows three track - only two glass shutters sliding duly
manufactured using UPVC reinforced profiles of (80 mm x 52
mm)/ (94 mm x 45 mm) x 2.0 mm for outer frames, (54 mm x 38
mm)/(39 mm x 58 mm) x 2.20 mm for sliding shutter frames
capable of mounting single glazing system, structurally
reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion
BMT-
835 welding the window sash shall be fitted with 5 mm thick clear 1 Sqm 5,995.00 25.21
P.67
float glass of reputed make duly fixed with TPV Gaskets/ EPDM
weathering seal resistant accessories like locking system 1 No.,
per set of sashes and the system is to be installed at the site using
anchor fasteners, silicon rubber sealant, easy glazing/ deglazing
at site etc., including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site
with templates for casement sizing complete for finished item of
work
68
Total
Buildings Embedded
(%)

sliding windows three track - two glass shutters sliding and one
mesh shutter duly manufactured using UPVC reinforced profiles
of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer
frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding
shutter frames capable of mounting single glazing system
structurally reinforced with hot dip galvanized up to 50 microns
of minimum thickness of 1.2 mm prefabricated & welded
through fusion welding the window sash shall be fitted with 5
BMT-
836 mm thick clear float glass of reputed make and mesh shutter 1 Sqm 6,674.00 25.22
P.68
frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2 mm
fitted with nylon/ polymer mesh on rollers/ pulley duly fixed
with TPV Gaskets/ EPDM weathering seal resistant accessories
like locking system 1 No., per set of sashes and the system is to be
casement windows openable shutters duly manufactured using
frames, 64 mm x 60 mm x 2.0 mm for mullion sections for two or
more openable shutters and 78 mm x 60 mm x 2.0 mm for
outward openable shutter frame or 70 mm x 60 mm x 2.0 mm for
inward openable shutter frame capable of mounting single
glazing system structurally reinforced with hot dip galvanized up
to 50 microns of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the window sash shall be fitted
BMT-
837 with 5 mm thick clear float glass of reputed make duly fixed with 1 Sqm 6,471.00 25.21
P.69
TPV Gaskets/ EPDM weathering seal resistant accessories for
casement window - friction stay hinges of stainless steel grade
304- 2 Nos., per sash, handle with mazak alloy casting 1 No. per
sash, locking system suitably concealed 1 No., per sash provided
with raiser wedges for smooth operation and the system is to be
69
Total
Buildings Embedded
(%)

casement windows openable shutters duly manufactured using
frames, 70 mm x 60 mm x 2.0 mm for mullion sections for two or
more openable shutters 70 mm x 60 mm x 2.0 mm for openable
shutter frame capable of mounting single glazing system
structurally reinforced with hot dip galvanized up to 50 microns
of minimum thickness of 1.2 mm prefabricated & welded
through fusion welding the window sash shall be fitted with 5
BMT- mm thick clear float glass of reputed make duly fixed with TPV
838 1 Sqm 7,051.00 25.2
P.70 Gaskets/ EPDM weathering seal resistant and accessories for
casement window - friction stay hinges of stainless steel grade
304- 2 Nos., per sash, handle with mazak alloy casting 1 No. per
sash, multipoint locking system suitably concealed 1 No., per sash
provided with raiser wedges for smooth operation and the
system is to be installed at the site using anchor fasteners, silicon
rubber sealant, easy glazing/ deglazing at site etc., including cost
and conveyance of all materials, accessories, labour charges for
transportation, erection at site with templates for casement
sizing complete for finished item of work
BMT-
839 DELETED 1 Sqm
P.71
BMT-
840 DELETED 1 Sqm
P.72
Galvanized powder coated Casement Windows with openable
shutters duly manufactured using pressed steel sections in mild
steel conforming to IS 513 of having 1.0 mm thick and galvanized
as per IS 277 of 120 GSM surface treatment with pure polyester
powder coating of 30-40 microns thick and section for outer
frame of 60x50mm, centre for mullion of 62x50mm, section for
shutter of 52 x 22 mm, outer frame and mullions to have one side
rebate for glazed shutter of size 24 mm and 10x10 mm square
BMT- guard bars provided at 125 mm c/c the sections assembled with
841 1 Sqm 5,685.00 25.19
P.73 bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle
of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel
heavy duty pivot hinges of size 3" of SS 304 Grade per shutter,
window panes with 5 mm thick plain float glass and fixed with
glass beading section of 10x12 mm size with 0.8 mm thick
powder coated aluminium 'U' channel and window frames fixing
to the concrete/masonry wall arrangement with self expanding
screws, complete for finished item of work including of all taxes -
1220 x 1372 or below size
70
Total
Buildings Embedded
(%)

frame of 60x50mm, centre for mullion of 62x50mm, section for
shutter of 52 x 22 mm, outer frame and mullions to have one side
rebate for glazed shutter of size 24 mm and 10x10 mm square
BMT- guard bars provided at 125 mm c/c the sections assembled with
842 1 Sqm 5,093.00 25.2
P.74 bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle
of size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel
heavy duty pivot hinges of size 3" of SS 304 Grade per shutter,
window panes with 5 mm thick plain float glass and fixed with
glass beading section of 10x12 mm size with 0.8 mm thick
powder coated aluminium 'U' channel and window frames fixing
to the concrete/masonry wall arrangement with self expanding
screws, complete for finished item of work including of all taxes -
1530 x 1372 or above size
frame of 88x50mm, centre for mullion of 62x88 mm, section for
glass and fly-proof mesh shutter of 52 x 22 mm, outer frame and
mullions to have two sides rebate for glazed shutter of size 24
mm and 10x10 mm square guard bars provided at 125 mm c/c
BMT- the sections assembled with bolt & nut assembly with zinc-
843 1 Sqm 7,142.00 25.21
P.75 electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No
per shutter, 2 Nos of stainless steel heavy duty pivot hinges of
size 3" of SS 304 Grade per shutter, window panes with 5 mm
thick plain float glass and fixed with glass beading section of
10x12 mm size with 0.8 mm thick powder coated aluminium 'U'
channel and fly-proof mesh of SS 304 grade fixed with 18 mm x
12 mm BT wood beading and window frames fixing arrangement
to the concrete/masonry wall with self expanding screws,
complete for finished item of work including of all taxes - 1220 x
1372 or below size
71
Total
Buildings Embedded
(%)

frame of 88x50mm, centre for mullion of 62x88 mm, section for
glass and fly-proof mesh shutter of 52 x 22 mm, outer frame and
mullions to have two sides rebate for glazed shutter of size 24
mm and 10x10 mm square guard bars provided at 125 mm c/c
BMT- the sections assembled with bolt & nut assembly with zinc-
844 1 Sqm 6,566.00 25.21
P.76 electroplated M-5 bolts, GI Handle of size 80 mm x 15 mm -1 No
per shutter, 2 Nos of stainless steel heavy duty pivot hinges of
size 3" of SS 304 Grade per shutter, window panes with 5 mm
thick plain float glass and fixed with glass beading section of
10x12 mm size with 0.8 mm thick powder coated aluminium 'U'
channel and fly-proof mesh of SS 304 grade fixed with 18 mm x
12 mm BT wood beading and window frames fixing arrangement
to the concrete/masonry wall with self expanding screws,
complete for finished item of work including of all taxes - 1530 x
1372 or above size
Providing & Fixing of Mesh windows made of pre-painted steel
(Base Steel as per IS 513 of 0.58mm thick galvanized as per IS
277 with zinc of 120 GSM), primer coated with epoxy primer of 5-
7 microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with 5-7 microns thick alkyd
backer, section for outer frame of 47 x 36 mm, centre mullion of
BMT- 60 x 36 mm, section mesh beading 18 x 6 mm and Fly mesh
845 1 Sqm 4,413.00 25.19
P.77 shutter section of 20 x 40 mm, the sections cut to length meter
joined with corner bracket and centre mullions fixed with
mullion cap, handles, latch, 2 Nos of heavy duty stainless steel
pivot hinges per S.S. Mesh for fly mesh shutter (304 grade)
including fixing the frames in the concrete/masonry wall by
means of self expanding screws complete for finished item of
work.
Providing & fixing white colour Rigid PVC window frame and
shutter with single rebate using frame section of 50 x 35 mm,
centre mullion 50 x 47 mm and the thickness of shutter 25 mm
thick, the frame work made of M.S. Tube of 19 gauge of size 15 x
15 mm and solid PVC Section made of 4 mm thick (3.75 mm PVC
foam sheet laminated with .25 mm rigid PVC sheet) and heat
BMT-
846 moulded PVC “C” section of size 50 x 25 x 25 mm forming rails & 1 Sqm 4,378.00 25.19
P.78
stiles and reinforced with M.S. Tube of 19 gauge of size 15 x 15
mm and suitably joined with solvent cement and fitted with 4
mm thick glass panel with Aluminium handles, tower bolts,
hinges and stopper complete as per direction of Engineer in-
charge and manufacturers specification. (All sizes with openable
shutters)
72
Total
Buildings Embedded
(%)
Providing & fixing white colour Rigid PVC window frame and
shutter with double rebate (glass & mesh) using frame section of
42 x 115 mm made out of M.S. Tube of 19 gauge 15 x 15 mm and
solid PVC section made from 4 mm thick (3.75 mm foam sheet
laminated with 0.25mm rigid PVC sheet Suitably joined using
PVC solvent cement and the window shutter of 25 mm thick heat
BMT-
847 moulded with PVC ‘C’ section of size 50 x 25x 50mm forming rails 1 Sqm 7,633.00 25.21
P.79
& stiles and reinforced with with M.S. Tube of 19 gauge 15 x 15
mm and glass and wire mesh fitted externally in the clear space
available between stiles and rails and fixed with PVC beading of
size 23 mm x 16 mm complete as per direction of Engineer in
charge and manufacturers specification (All sizes with openable
shutters)
Providing and fixing COMPOSITE SLIDING WINDOW fabricated
from roll formed sections made of Galvanized Steel colour
Coated/Powder Coated (Base Steel as per IS 513 “D” quality,
Galvanized as per IS 277 with Zinc of 120 grams /Sq.Mtr.) with
total coated thickness of 0.58 mm, powder coated with pure
Polyester Powder up to 50-60 microns thick and the section for
external frame bottom of 68 x 25mm (Aluminium), External
frame sides & Top of 68 x 25 mm (Aluminium), section for
shutter of 59 x 23mm and Lap Strip of 30 x 7.5mm (uPVC) cut to
BMT- length and mitre joined with L-bracket and 5 mm plain float
848 1 Sqm 5,511.00 25.19
P.80 Glass with Ethyl Propylene Diamine Monomer (EPDM) gasket,
the corner bracket for external frame made of Aluminium ‘L’-
Angle, Corner Bracket for internal frame made of Polypropylene,
Crescent Latch, Rollers, & EPDM Gaskets for shutters, wool pile
for lap strip, Bump Stop Base & Rubber for shutter stopper
including fixing to brick/concrete masonry using Nylon self-
expanding caps and driving MS electroplated 80mm long screws
into the caps through frames and fixing 10mm square guard bars
with 6” pitch centre to centre (152.4mm) and all taxes completed
for finished item of work
Providing and fixing of Two shutter Sliding Windows made of
Galvanized Steel (Base Steel as per IS 513, D quality, galvanized
as per IS 277 with Zinc of 120 GSM), using factory made section
powder coated with Pure polyester powder up to 50-60 microns
thick with total coated thickness of 0.8 mm for Outer Frame and
0.58 mm thickness for Sliding Shutter Section, the Outer Frame
for Two Tracks with Grill provision size of 90 mm x 50 mm and
without grill provision is of 75 mm x 50 mm and the Window
Shutter section of 58 mm x 36 mm and the outer Frame with two
integrated guide tracks of 12mm width and 24mm deep for
#DIV/0!
provision to slide the Shutter / sash frame and facilitates with a
water drain outlet component made of PVC and the shutter
frame fitted with 5mm thick plain float glass of reputed make
and fixed with EPDM weathering seal resistant accessories and
handle made of Aluminium 1 No. per each shutter and cut to
length mitre joined with corner brackets including installation of
window system at site using anchor fasteners, Silicon sealant
applied at the Outer frame corners inclusive of conveyance of all
materials accessories, labour charges, and erection at site with
complete finished item of work.
73
Total
Buildings Embedded
(%)
BMT- Window with Two Sliding Shutters and without Grill Outer
850 1 Sqm 5,302.00 25.19
P.81 Frame Size 75 mm x 50 mm.
Window with Two Sliding Shutters and with Grill Outer Frame
BMT- Size 90 mm x 50 mm have a rebate of 15mm x 5 mm to fit grill
851 1 Sqm 5,880.00 25.21
P.82 made of 10mm MS Sq Rods for horizontal bars welded at a
regular pitch of 150mm to 12mm x 6 mm MS flat.
Providing and fixing of Three shutter Sliding Windows made of
Galvanized Steel (Base Steel as per IS 513, D quality, galvanized
as per IS 277 with Zinc of 120 GSM), using factory made section
powder coated with Pure polyester powder up to 50-60 microns
thick with total coated thickness of 0.8 mm for Outer Frame and
0.58 mm thickness for Sliding Shutter Section, the Outer Frame
for three tracks with grill provision size of 105 mm x 50 mm and
without grill provision is of 90 mm x 50 mm and the Window
Shutter section of 58 mm x 36 mm and the outer Frame with two
integrated guide tracks of 12mm width and 24mm deep for
provision to slide the Shutter / sash frame and facilitates with a
water drain outlet component made of PVC and the shutter
frame fitted with 5mm thick plain float glass of reputed make
and fixed with EPDM weathering seal resistant accessories and
handle made of Aluminium 1 No. per each shutter and cut to
length mitre joined with corner brackets including installation of
window system at site using anchor fasteners, Silicon sealant
applied at the Outer frame corners inclusive of conveyance of all
materials accessories, labour charges, and erection at site with
complete finished item of work.
Window with 3 shutters (centre fixed shutter / Centre sliding
shutter / centre Fly mesh shutter) and with Grill Window made
of Outer Frame of Size 105 mm x 50 mm. Grill made of 10mm MS
Square Rods for horizontal bars at a regular pitch of 150mm
welded to MS flat of 12 x 6 mm.
I) Centre Shutter Fixed: centre shutter frame made of section
with size 20mm x 47mm should be fitted with 5mm thick plain
BMT- float glass of reputed make, EPDM gasket all around the glass and
853 1 Sqm 6,212.00 25.22
P.83 fixed to the Outer Frame with the supporting section of size
29mm x 20mm of 0.58mm thick fixed horizontally on top and
bottom of the shutter frame.
ii) Centre Shutter Sliding: centre shutter frame made of section
of size 20mm x 47mm should be fitted with 5 mm thick plain
float glass of reputed make. The supporting guide section of size
BMT-
854 15mm x 19mm of 0.58mm thick fixed horizontally at top and 1 Sqm 6,801.00 25.2
P.84
bottom of shutter frame and slides along the bottom and top
guide tracks made of sections size 24mm x 20mm of 0.58mm
thick and 29mm x 20mm of 0.58mm thick
iii) Centre Fly mesh Shutter Sliding: Section for Fly mesh Shutter
frame should be of size 20mm x 40mm of 0.58mm thick and
fitted with SS mesh (304 Grade). The supporting guide section of
BMT- size 29mm x 20mm of 0.58mm thick at the bottom and 15mm x
855 1 Sqm 6,801.00 25.2
P.85 19mm of 0.58mm thick at the top fixed horizontally to the Fly
mesh frame and slides along the bottom and top guide tracks
made of sections size 20mm x 20mm of 0.58mm and 29mm x
20mm of 0.58mm.
74
Total
Buildings Embedded
(%)
Window with 3 shutters (Centre fixed shutter / Centre sliding

shutter / centre Fly mesh shutter) and without Grill Window
made of Outer Frame of size 90mm x 50mm.
I) Centre Shutter Fixed: centre shutter frame made of section
with size 20mm x 47mm of 0.58mm thick should be fitted with
BMT- 5mm thick plain float glass of reputed make, EPDM gasket all
857 1 Sqm 5,570.00 25.2
P.86 around the glass and fixed to the Outer Frame with the
supporting section of size 29mm x 20mmof 0.58mm thick fixed
horizontally on top and bottom of the shutter frame.
ii) Centre Shutter Sliding: centre shutter frame made of section
with size 20mm x 47mm of 0.58mm thick should be fitted with 5
mm thick plain float glass of reputed make. The supporting
BMT-
858 guide section of size 15mm x 19mm of 0.58mm thick fixed 1 Sqm 6,095.00 25.21
P.87
horizontally at top and bottom of shutter frame and slides along
the bottom and top guide tracks made of sections size 24mm x
20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick.
iii) Centre Fly mesh Shutter Sliding: Section for Fly mesh shutter
frame should be of size 20mm x 40mm and fitted with SS mesh
(304 Grade). The supporting guide section of size 29mm x 20mm
BMT- of 0.58mm thick at the bottom and 15mm x 19mm of 0.58mm
859 1 Sqm 6,095.00 25.21
P.88 thick at the top fixed horizontally to the Fly mesh frame and
slides along the bottom and top guide tracks made of sections
size 20mm x 20mm of 0.58mm thick and 29mm x 20mm of
0.58mm thick.
Providing and fixing of Openable / Casement Windows made of
pre-painted steel (Base steel as per IS 513 of 0.80 mm thick
galvanized as per IS 277 with Zinc of 120 GSM), finish painted
with a polyester paint of 60-65 microns thick and section for
outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section
for shutter of 52 x 25 mm x 0.6 mm thick, outer frame and
mullions to have rebate for glazed shutter with a provision for
guard bars/grills and the sections cut to length metre joined with
corner bracket, centre mullion fixed with mullion cap, 1 No. of
High grade nylon latch handle, window stopper, 2 nos. of with MS
Powder coated /SS ball bearing butt Hinges provided per shutter
and windows fitted with 4 mm thick plain float glass with rubber
gaskets including fixing the frames in concrete/masonry wall by
means of self expanding screws, Including 10 mm Square guard
bars with 6” (152.4mm) pitch etc., complete for finished item of
work.
Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x
BMT-
860 1219.2mm) outer frame section size of 80 x 45mm, shutter 1 sqm 5,088.00 25.2
P.89
frame section size of 52 x 25mm thick
Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x
BMT- 1219.2mm) outer frame section size of 80 x 45mm,shutter frame
861 1 sqm 5,409.00 25.21
P.90 section size of 52 x 25mm, vertical mullion section size of 80 x 60
mm
Double openable shutter window size of 4’0” x 4’0” (1219.2mm x
BMT- 1219.2mm) outer frame section size 80 x 45mm, shutter frame
862 1 sqm 5,409.00 25.21
P.91 section size of 52 x 25 mm ,Vertical mullion section size of 80 x
60 mm
75
Total
Buildings Embedded
(%)
Double Openable Shutter and Centre Fixed window of size 5’0 x

4’0 ( 1524 x 1219.2mm)outer frame section size of 80mm x
BMT-
863 45mm, shutter frame section size of 52 x 25mm ,Vertical mullion 1 sqm 4,766.00 25.19
P.92
section size of 80 x 60 mm, beading section size of 9 x 12mm to
be provided for glass holding
Double Openable Shutter and Centre Fixed window of size 6’0
x4’0 ( 1829.6 x 1219.2mm)outer frame section size of 80mm x
BMT-
864 45mm , shutter frame section size of 52 x 25mm ,Vertical mullion 1 sqm 4,766.00 25.19
P.93
section size of 80 x 60 mm, beading section size of 9 x 12mm to
Note: The above rates are for normal finish, 10% extra may be
allowed for Wood Grain finish
Providing and fixing of Openable / Casement Windows with fly
mesh made of pre-painted steel (Base steel as per IS 513 of 0.80
mm thick galvanized as per IS 277 with Zinc of 120 GSM), finish
painted with a polyester paint of 60-65 microns thick and section
for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm,
section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-
shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless
steel 32 gauge fly mesh of 304 grade with 144 holes per sq.inch
and mullions to have double rebate for glazed shutter and fly-
shutter with a provision for guard bars/grills and the sections cut
to length metre joined with corner bracket, centre mullion fixed
with mullion cap, 1 No. of High grade nylon latch handle, window
stopper, 2 nos. of with MS Powder coated /SS ball bearing butt
Hinges provided per shutter and windows fitted with 4 mm thick
plain float glass with rubber gaskets including fixing the frames
in concrete/masonry wall by means of self expanding screws,
Including 10 mm Square guard bars with 6” (152.4mm) pitch
etc., complete for finished item of work.
Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x
BMT- 1219.2mm) outer frame Double rebate section size of 100 x
865 1 sqm 6,748.00 25.19
P.94 45mm, Glazed and fly mesh shutter profile section size of 52 x
25mm
Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x
866 1 sqm 7,069.00 25.2
25mm, vertical mullion section size of 100 x 60 mm
Double openable shutter window size of 4’0” x 4’0” (1219.2mm x

867 1 sqm 7,069.00 25.2
25mm, vertical mullion section size of 100 x 60 mm
Double Openable Shutter and Centre Fixed window of size 5’0 x
4’0 ( 1524 x 1219.2mm)outer frame section size of 80mm x
BMT-
P.97
section size of 100 x 60 mm , beading section size of 9 x 12mm to
Double Openable Shutter and Centre Fixed window of size 6’0
x4’0 ( 1829.6 x 1219.2mm)outer frame section size of 80mm x
BMT-
P.98
section size of 100 x 60 mm , beading section size of 9 x 12mm to
76
Total
Buildings Embedded
(%)
Providing and fixing of top hung Ventilators made of pre-painted
steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per
IS 277 with Zinc of 120 GSM), finish painted with a polyester
paint of 60-65 microns thick and section for outer frame of 80 x
45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x
25 mm x 0.6 mm thick, outer frame and mullions to have rebate
for glazed shutter with a provision for guard bars/grills and the
sections cut to length metre joined with corner bracket, centre
mullion fixed with mullion cap, 1 No. of High grade nylon latch
handle, window stopper, 2 nos. of with MS Powder coated /SS
ball bearing butt Hinges provided per shutter and windows fitted
with 4 mm thick plain float glass with rubber gaskets including
fixing the frames in concrete/masonry wall by means of self
expanding screws, Including 10 mm Square guard bars with 6”
(152.4mm) pitch etc., complete for finished item of work.
Single openable ventilator shutter size of 2’ 0” x 2’ 0” (609.6 x
BMT-
870 609.6mm) outer frame section size of 80 x 45mm, shutter frame 1 sqm 6,105.00 25.21
P.99
section size of 52 x 25mm thick
Double openable ventilator shutter Size of 4’ 0” x 2’ 0”
BMT- (1219.2mm x 609.6mm) outer frame section size of 80 x
871 1 sqm 6,105.00 25.21
P.100 45mm,shutter frame section size of 52 x 25mm, vertical mullion
section size of 80 x 60 mm
Double openable fix shutter size of 4’0” x 3’0” (1219.2mm x
BMT- 914.4mm) outer frame section size of 80 x 45mm , shutter frame
872 1 sqm 6,105.00 25.21
P.101 section size of 52 x 25 mm ,Vertical mullion section size of 80 x
60 mm
BMT- Single fixed Louvers Ventilator size of 2’ 0” x 2’ 0” (609.6 x
873 1 sqm 4,177.00 25.21
P.102 609.6mm) outer frame box section size of 80 x 45mm
Double fixed Louvers ventilator Size of 4’ 0” x 2’ 0” (1219.2mm x
BMT-
874 609.6mm) outer frame box section size of 80 x 45mm, vertical 1 sqm 4,177.00 25.21
P.103
mullion section size of 80 x 60 mm
Double fixed Louvers Ventilator size of 4’0” x 3’0” (1219.2mm x
BMT-
875 914.4mm) outer frame box section size of 80 x 45mm , Vertical 1 sqm 4,177.00 25.21
P.104
77
Total
Buildings Embedded
(%)
Providing and fixing of top hung Ventilator with fly mesh made
of pre-painted steel (Base steel as per IS 513 of 0.80 mm thick
galvanized as per IS 277 with Zinc of 120 GSM), finish painted
with a polyester paint of 60-65 microns thick and section for
outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm,
section for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-
shutter of 52 x 25 mm x 0.6 mm thick and fitted with stainless
steel 32 gauge fly mesh of 304 grade with 144 holes per sq.inch
and mullions to have double rebate for glazed shutter and fly-
shutter with a provision for guard bars/grills and the sections cut
to length metre joined with corner bracket, centre mullion fixed
with mullion cap, 1 No. of High grade nylon latch handle, window
stopper, 2 nos. of with MS Powder coated /SS ball bearing butt
Hinges provided per shutter and windows fitted with 4 mm thick
plain float glass with rubber gaskets including fixing the frames
in concrete/masonry wall by means of self expanding screws,
Including 10 mm Square guard bars with 6” (152.4mm) pitch
etc., complete for finished item of work.
Single openable ventilator shutter window size of 2’ 0” x 2’ 0”
BMT- (609.6 x 609.6mm) outer frame section size of 100 x 45mm,
877 1 sqm 7,551.00 25.2
P.105 Glazed and fly mesh shutter frame section size of 52 x 25mm
thick
Double openable ventilator shutter window Size of 4’ 0” x 2’ 0”
BMT- (1219.2mm x 609.6mm) outer frame section size of 100 x 45mm,
878 1 sqm 7,551.00 25.2
P.106 Glazed and fly mesh shutter frame section size of 52 x 25mm,
vertical mullion section size of 100 x 60 mm
Double openable fix shutter window size of 4’0” x 3’0”
BMT- (1219.2mm x 914.4mm) outer frame section size 100 x 45mm ,
879 1 sqm 7,551.00 25.2
P.107 Glazed and fly mesh shutter frame section size 52 x 25 mm
,Vertical mullion section size of 100 x 60 mm
Single fixed Louvers Ventilator window size of 2’ 0” x 2’ 0” (609.6
BMT-
880 x 609.6mm) outer frame box section size of 100 x 45mm, fly 1 sqm 5,088.00 25.2
P.108
mesh shutter frame section size 52 x 25 mm
Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0”
BMT- (1219.2mm x 609.6mm) outer frame box section size of 100 x
881 1 sqm 5,088.00 25.2
P.109 45mm, fly mesh shutter frame section size 52 x 25 mm, vertical
Double fixed Louvers Ventilator window size of 4’0” x 3’0”
BMT- (1219.2mm x 914.4mm) outer frame box section size 100 x
882 1 sqm 5,088.00 25.2
P.110 45mm , fly mesh shutter frame section size 52 x 25 mm Vertical
Providing, supplying & fixing of Fixed Louvered Ventilator made
out of multi chambered uPVC sections with TPV gaskets having
isolated drainage and reinforced with Galvanized Iron profiles
throughout the window. The outer frame having an overall size
BMT-
883 of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion 1 sqm 6,005.00 25.21
P.111
with overall size of 74 x 60 mm with reinforcement of 1 mm
thickness. Ventilator shall be provided with 4.5 mm Pin Head
glass, standard hardware. Wall thickness of frame & Mullion shall
be 2.0 mm
78
Total
Buildings Embedded
(%)
Providing, supplying & fixing of Top hung Ventilator With

Exhaust Fan Provision made out of multi chambered uPVC
sections with TPV gaskets having isolated drainage and
reinforced with Galvanized Iron profiles throughout the window.
The outer frame having an overall size of 60 x 55 mm with
reinforcement of 1 mm thickness, Mullion with overall size of 74
BMT-
884 x 60 mm with reinforcement of 1 mm thickness and Sash with 1 sqm 8,450.00 25.2
P.112
overall size of 75 x 60 mm with reinforcement of 1.5 mm
thickness. Glazing bead for fixing of glass shall be of size 34 x 20
mm coextruded with gasket. Ventilator shall be provided with 4.5
mm Pin Head glass, standard hardware, single point locking and
friction stays. Wall thickness of frame, mullion and sash shall be
2.0 mm
Q STRUCTURAL GLAZING
Providing and fixing Structural Glazing fabricated from Roll
formed sections made of Pre-painted Steel / Powder coated
(Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277
with Zinc of 120 Gm/Sqm) with total coated thickness of 0.72
mm and the glass holding section made of 304 grade stainless
steel of 0.58 mm thick galvanised steel section as stiffeners
inside the colour coated steel powder coated sections as per the
design requirement & calculations to suit wind pressures as
given in IS: 875, the primer coat with epoxy primer of 5 – 7
microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with Alkyd backer of 5-7 microns
or powder coated with pure polyester powder up to 50-60
BMT- microns thick and the vertical section of 50 mm x 99 mm x 0.72
885 1 Sqm 6,748.00 25.19
Q.01 mm, 33 mm x 56 mm x 0.72 mm for frame horizontal section,
stiffener section of 47 mm x 97 mm x 1 mm, cover profiles
sections of 20 mm x 58 mm x 0.58 mm, glass holding section of 37
mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick
Ocean Blue reflective glass, brackets made of CRCA powder
coated/Electroplated to connect vertical to horizontal, vertical to
slab, to fix verticals at top & bottom as per site requirement and
gasket made of Ethyl Propylene Diamine Monomer, U.V. resistant
silicon sealant including fixing in concrete/masonry wall with
self-expanding cap & screws inclusive of cost and conveyance of
all materials to site, all labour charges, incidental charges, cost of
all consumables etc. and fixing charges complete for finished
item of work.
79
Total
Buildings Embedded
(%)
Providing and fixing Top Hung shutters in Structural Glazing

fabricated from Roll formed sections made of Pre-painted Steel /
Powder coated (Base steel as per IS 513 of ‘D’ quality, galvanized
as per IS 277 with Zinc of 120 Gm/Sqm) with total coated
thickness of 0.72 mm and the glass holding section made of 304
grade stainless steel of 0.58 mm thick, duly providing stiffeners
inside the colour coated steel/powder coated sections as per the
design requirement, calculations to suit wind pressures as given
BMT- in IS 875 and primer coat with epoxy primer of 5-7 microns thick
886 1 Sqm 5,455.00 25.2
Q.02 and back coated with Alkyd backer of 5-7 microns or powder
coated with pure polyester powder up to 50-60 microns thick
and the outer frame of 20 mm x 58 mm x 0.58 mm, shutter
sections of 57 mm x 33 mm x 0.72 mm, stiffener sections of 55
mm x 31 mm x 1mm, hinges – 2 Nos for each shutter and
aluminium Stays – 2 Nos. for each shutter, aluminium Handle – 1
no. for each shutter including cost and conveyance of all
materials to site, all labour charges, incidental charges, cost of all
consumables etc. and fixing charges etc for finished item of work
Supplying and fixing of curtain Glazing made of pre painted steel
(base steel as per IS 513 of 0.58 mm thick D quality, galvanized as
per IS 277 with Zinc of 120 GSM) Primer coated with epoxy
of 12- 16 microns thick and back coated with 5-7 microns thick
alkyd backer using the section for outer frame of 46 x 52 mm,
section for mullion of 46 x 70 mm and section for beading of 18 x
25 mm and the glazing with 5 mm thick plain float glass fitted
BMT-
887 with Ethyl Propylene Diamine Monomer (EPDM) gaskets and the 5,568.00 25.21
Q.03
sections cut to length, mitre joined with corner bracket, centre
mullions fixed suing mullion cap including handle made of high
grade Aluminium powder coated and nylon receiver, corner
brackets made of CRCA with zinc phosphating, mullion caps
made of Glass filled nylon including fixing the frames in the
concrete / masonry wall with self expanding screws, etc.,
complete for finished item.- Fixed Glazing 2'-0" x 2'-0"
(609.6x609.6mm) grid outer frames section size of 46 x 52 mm
Mullion section size of 46 x 70mm Beading section size of 18 x 25
BMT-
888 mm - Fixed Glazing 2'-0" x 3'-0" (609.6x914.4mm) grid outer 1 Sqm 5,568.00 25.21
Q.04
BMT-
889 mm Fixed Glazing 3'-0" x 3'-0" (914.4x914.4mm) grid outer 1 Sqm 4,724.00 25.21
Q.05
BMT-
890 mm Fixed Glazing 3'-0" x 4'-0" (914.4x1219.2mm) grid outer 1 Sqm 4,724.00 25.21
Q.06
BMT-
891 deleted
Q.07
BMT-
892 deleted
Q.08
BMT-
893 deleted
Q.09
BMT-
894 deleted
Q.10
BMT-
895 deleted
Q.11
80
Total
Buildings Embedded
(%)
BMT-
896 deleted
Q.12
Curtain Walling systems duly manufactured using UPVC
reinforced profiles of 60 mm x 56 mm x 2.5 mm for outer frames,
60 mm x 70 mm x 2.5 mm for casement shutter frames and the
mullion sections are of 60 mm x 70 mm x 2.5 mm or 60 mm x 62
mm x 2.5 mm for sliding shutter outer frames and 77 mm x 38
mm x 2.5 mm for sliding shutter frames structurally reinforced
with hot dip galvanized up to 50 microns of minimum thickness
of 1 mm the sash shall be fitted with 5 mm thick clear float glass
BMT-
897 of reputed make duly fixed with EPDM weathering seal resistant 6,903.00 25.21
Q.13
and accessories for casement window - friction stay hinges of
stainless steel grade 304- 2 Nos., per sash, handle with mazak
alloy casting 1 No. per sash, multipoint locking system suitably
concealed 1 No., per sash provided with raiser wedges for
smooth operation for sliding window - clipping locking system 1
No. made of aluminium including cost and conveyance of all
materials, accessories, labour charges for transportation,
Fixed Glazing - 48 series duly manufactured using UPVC
reinforced profiles of 60 mm x 48 mm x 2.25 mm for outer
frames and the mullion sections are of 60 mm x 76 mm x 2.25
mm frames are structurally reinforced with hot dip galvanized
BMT-
898 up to 50 microns of minimum thickness of 1.2 mm the sash shall 1 Sqm 3,240.00 25.19
Q.14
be fitted with 5 mm thick clear float glass of reputed make duly
fixed with EPDM weathering seal resistant including cost and
conveyance of all materials, accessories, labour charges for
Fixed Glazing - 56 series duly manufactured using UPVC
reinforced profiles of 60 mm x 56 mm x 2.25 mm for outer
frames and the mullion sections are of 60 mm x 70 mm x 2.25
mm frames are structurally reinforced with hot dip galvanized
BMT-
899 up to 50 microns of minimum thickness of 1.2 mm the sash shall 1 Sqm 3,872.00 11.46
Q.15
be fitted with 5 mm thick clear float glass of reputed make duly
fixed with EPDM weathering seal resistant including cost and
conveyance of all materials, accessories, labour charges for
A. DISMANTLING clearing away and carefully stacking materials
S
useful for reuse.
BMT-
900 Stone masonry in cement mortar 1 Cum 336 0
S.01
BMT-
901 Terracing work in roofs or floors 10 Sqm 139 0
S.02
BMT-
902 Flat stones in roof or floors including lifting 10 Sqm 116 0
S.03
BMT-
903 Pan tiled or Mangalore tiled roof without roof timbers. 10 Sqm 105 0
S.04
81
Total
Buildings Embedded
(%)
BMT- Flat and pan tiles or Mangalore tiles over flat tiles without roof
904 10 Sqm 116 0
S.05 timbers
BMT-
905 Wrought and framed timber in roofs or floors 1 Cum 175 0
S.06
BMT-
906 Old lime mortar plaster 10 Sqm 36 0
S.07
BMT-
907 Old cement mortar plaster 10 Sqm 41 0
S.08
BMT- Dry rough stone revetment for aprons and stacking within 40 M
908 1 Cum 56 0
S.09 lead
BMT-
909 Revetment for aprons and stacking grouted within 40 lead 1 Cum 41 0
S.10
BMT-
910 Kadapa slabs or Shahabad stone slabs flooring on sand bed 10 Sqm 58 0
S.11
BMT-
911 Through scraping of old plastered surface 10 Sqm 36 0
S.12
BMT-Washing of plastered surface with soap, soda and water (or with
912 10 Sqm 12 0
S.13
soda lime and water)
clean removal of lime plaster from walls and raking out joints
BMT-
913 20mm deep or from terraced roof and raking out joints 100 mm 10 Sqm 37 0
S.14
deep
BMT- Clean removal of cement plaster from walls and raking out joint
914 10 Sqm 39 0
S.15 200 mm deep
T READY MIX CONCRETE
BMT-
916 Deleted
T.01
BMT-
917 Deleted
T.02
BMT-
918 Deleted
T.03
BMT-
919 Deleted
T.04
BMT-
920 Deleted
T.05
U EXPANSION JOINT FILLERS
BMT- Supply of high performance expansion joint filler board
921 1 Sqm 804 18.06
U.01 conforming to M.O.S.T - 18 mm THICK
922 1 Sqm 902 18.06
923 1 Sqm 1,127.00 18.13
BMT- Supply of expansion joint filler board for buildings, columns,
924 1 Sqm 322 17.95
U.04 beams and slabs 20 mm THICK
925 1 Sqm 403 18.18
926 1 Sqm 804 18.06
BMT- Supply of back up to cold applied sealant in construction and
927 1 RM 13 30
U.07 longitudinal joint - 10 mm OD
928 1 RM 15 25
929 1 RM 18 28.57
930 1 RM 26 30
82
Total
Buildings Embedded
(%)

931 1 RM 32 28
V LABOUR CHARGES
Bailing out water for earth work excavation /concrete for
BMM-
932 foundation below water level. (For building items only) - Other 1 cum 205 0
V.01
than sandy soil - 0.0 M to 1.0 M
BMM-
V.02
BMM-
V.03
Bailing out water for earth work excavation / for concrete
BMM-
935 foundation below water level. (For building items only) Sandy 1 cum 325 0
V.04
soil - 0.0 M to 1.0 M
Bailing out water for earth work excavation /for concrete
BMM-
V.05
soil - 1.0 M to 2.0 M
BMM-
V.06
soil - 2.0 M to 3.0 M
Labour charges for making, fabricating office furniture, racks,
work-station furniture, cup-board shutters with ply-wood/ MDF
BMM- sheets, decolam/ veneer laminations including fixing cutting,
938 1 Sqm 512 0
V.07 making, assembling, fixing hinges, fixing fixtures, fixing locks,
pasting sheets/ laminations fixing in position with necessary
screws excluding cost of materials, accessories, fittings
Labour charges for making, fabricating kitchen furniture, cup-

boards with shutters, box cup-boards, box racks, with ply-wood/
BMM- MDF sheets, decolam/ veneer laminations including fixing
939 1 Sqm 782 0
V.08 cutting, making, assembling, fixing hinges, fixing fixtures, fixing
locks, pasting sheets/ laminations fixing in position with
necessary screws excluding cost of materials, accessories, fittings
BMM- Rounding the edges of Kadapa / Shahabad stone slabs of any
940 1 Rm 88 0
V.09 thickness including polishing the same
BMM- Half Rounding the edges of Marble/ Granite stone slabs of all
941 1 Rm 269 0
V.10 thicknesses including polishing the same.
BMM- Full Rounding the edges of Marble/ Granite stone slabs of all
942 1 Rm 348 0
V.11 thicknesses including polishing the same.
BMM- Machine Cutting charges - for Marble/ Granite slabs up to 50 mm
943 1 RM 14 0
V.12 thick by mechanical device.
BMM-
944 Flat nosing to Kadapa/ Shahabad stone slabs of any thick 1 Rm 14 0
V.13
Labour charges for fabricating steel works like Window Grills,
BMM-
945 Compound Wall Grills, Iron Doors, Windows including cost of 1 Kg 22 0
V.14
welding rods, power charges, excluding cost of fixing in position
BMM- Labour charges for fixing Iron Doors, Iron Windows and Window
946 1 Kg 4 0
V.15 Grills in position
Labour charges for fabricating all heavy steel works like Trusses,
BMM-
947 Stanchions, Heavy Beams and Girders including cost of welding 1 Kg 20 0
V.16
rods, power charges, etc excluding cost of fixing in position
83
Total
Buildings Embedded
(%)
Labour charges for fixing heavy iron grills, Trusses, Stanchions,

BMM- Heavy Beams and Girders erecting in position and fixing by using
948 1 Kg 18 0
V.17 chain pulley blocks, Derek pole arrangements and cranes etc.,
complete in position
Labour charges for Fabrication of stainless steel railing works
BMM-
949 using stainless steel welding rods including buffing, polishing, 1 Kg 111 0
V.18
lacquer finishing, to present seamless finish
Labour charges for Fabrication of stainless steel sheet cladding
BMM-
950 works using stainless steel welding rods including buffing, 1 sqm 1,485.00 0
V.19
polishing, lacquer finishing, to present seamless finish
BMM- Labour charges for Glass designing works on any thickness of
951 1 Sqm 808 0
V.20 Glass including fixing at site - Etching works
952 1 Sqm 999 0
V.21 Glass including fixing at site - Reverse Etching work
953 1 Sqm 1,249.00 0
V.22 Glass including fixing at site - Acid wash works
Labour charges for fixing Flush door shutters of any thickness to
BMM-
954 the existing door frame including fixing the fixtures to the door 1 Sqm 324 0
V.23
shutter excluding cost of shutter
Labour charges for fixing glass panes of any thickness to the
BMM-
955 existing door / window panes including fixing the beading 1 Sqm 242 0
V.24
excluding cost of beading
Labour charges for wrought and put up including fixing in
BMM- position frames of any size, shutters for doors, windows,
956 1 Sqm 1328 0
V.25 ventilators including fixing all necessary fixtures etc. for Teak
wood Fully panelled doors external or internal including frame
position frames of any size, shutters for doors, windows,
BMM-
957 ventilators including fixing all necessary fixtures etc. for Teak 1 Sqm 1255 0
V.26
wood Glazed and panelled doors including fixing glass including
frame
958 1 Sqm 1101 0
wood Framed and planked doors including frame
959 1 Sqm 861 0
wood Ledged, braced and planked doors including frame
960 1 Sqm 663 0
wood Flush type door shutter including frame
961 1 Sqm 849 0
wood Windows glazed including outer frame and shutter frame
BMM-
V.31
wood Windows panelled including outer frame and shutter
frame
84
Total
Buildings Embedded
(%)

BMM-
V.32
wood Windows ledged, braced and planked including outer
frame
BMM-
V.33
wood Windows framed and planked including outer frame and
shutter frame
BMM-
V.34
wood Ventilators glazed, fixed with double frame with wire
netting including frame
BMM-
V.35
wood Swing ventilators glazed including outer frame and shutter
frame
BMM-
V.36
wood Weld mesh doors and windows including outer frame and
shutter frame
BMM-
V.37
wood G.I or .AC sheet door & windows including outer frame and
shutter frame
BMM-
969 ventilators including fixing all necessary fixtures etc. for Other 1 Sqm 1228 0
V.38
than teakwood Fully panelled doors external or internal
including frame
BMM-
V.39
than teakwood Glazed and panelled doors including fixing glass
including frame
971 1 Sqm 1018 0
V.40 ventilators including fixing all necessary fixtures etc. for Other
than teakwood Framed and planked doors including frame
BMM-
V.41
than teakwood Ledged, braced and planked doors including
frame
973 1 Sqm 637 0
V.42 ventilators including fixing all necessary fixtures etc. for Other
than teakwood Flush type door shutter including frame
85
Total
Buildings Embedded
(%)

BMM-
V.43
than teakwood Windows glazed including outer frame and
shutter frame
BMM-
V.44
than teakwood Windows panelled including outer frame and
shutter frame
BMM-
V.45
than teakwood Windows ledged, braced and planked including
outer frame
BMM-
V.46
than teakwood Windows framed and planked including outer
frame and shutter frame
BMM-
V.47
than teakwood Ventilators glazed, fixed with double frame with
wire netting including frame
BMM-
V.48
than teakwood Swing ventilators glazed including outer frame
and shutter frame
BMM-
V.49
than teakwood Weld mesh doors and windows including outer
BMM-
V.50
than teakwood G.I or .AC sheet door & windows including outer
MISCELLANEOUS ITEMS
BMS- Supplying Aluminium anodised Sections for Doors, partitions,
982 1 Kg 321 18.01
W.01 windows, Ventilators (including annodization cost)
BMS- Sun Control film to the glazed windows partition including labour
983 1 sqm 329 17.92
W.02 charges.
BMS- Aluminium Venetian Blinds horizontal 25.4 mm wide with all
984 1 sqm 833 18.16
W.03 accessories.
BMS- Aluminium Venetian Blinds horizontal 20.0 mm wide with all
985 1 sqm 798 18.05
W.04 accessories.
BMS-
986 Venetian blinds Vertical blinds 100 mm wide with all accessories. 1 sqm 1,355.00 18.13
W.05
BMS-
987 Rubber Beading 1 RM 2 0
W.06
BMS-
988 S&F of marblex flooring with 2.0 mm thick in rolls. 1 sqm 421 15.98
W.07
86
Total
Buildings Embedded
(%)
BMS-
989 S&F Vinyl Flooring with 1.5 mm thick in rolls 1 sqm 421 15.98
W.08
BMS-
990 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 1 Litre 228 28.81
W.09
BMS-
991 Soft Brush Each 148 14.73
W.10
BMS-
992 Wire Brush Each 33 13.79
W.11
Supplying and fixing aluminium composite cladding with skin
material 0.25 mm thick aluminium sheet cover material natural
polyethylene aluminium cladding panel fixed with extruded
aluminium basis frame (50x25x1.5mm) angle cleats, weather
BMS- sealants, rivets, GI brackets all as approved, using suitable bolts
993 1 Sqm 2,586.00 16.02
W.12 on structural steel work including necessary accessories
complete in all respects including all scaffolding and labour
charges etc., complete for finished item of work but excluding
cost of structural steel fabrication, if any, ACP Cladding - 3 mm
thk
994 1 Sqm 2,820.00 16
thk
995 1 Sqm 3,163.00 16.03
thk
BMS-
996 CEMENT JALI - 25 mm thick 1 sqm 226 29.14
W.15
BMS-
W.16
BMS-
W.17
BMS-
999 Aluminium sheet 24 Gauge 1 Sqm 302 17.97
W.18
BMS- 7.5mm thick Aluminium Grill (as approved by the department)
1000 1 Sqm 1,112.00 18.17
W.19 3.58 Kg/Sqm.
BMS-
1001 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1" (25.4 mm ) thick 1 Sqm 991 18.12
W.20
BMS-
1002 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick 1 Sqm 568 18.09
W.21
Supply of hot pressed compression moulded sign plates for
making road signs as per the approved dimensions of National
Highway Authority Of India, complete, for finished item of work.
87
Total
Buildings Embedded
(%)
BMS-
1003 Circular sign plate Dia 400mm. Each. 577 18.24
W.22
BMS-
1004 Circular sign plate Dia 600mm. Each. 1,517.00 18.15
W.23
BMS-
1005 Circular sing plate Dia 870mm Each. 3,040.00 18.1
W.24
BMS-
1006 Triangular sign plate 600mm. Each. 779 18.21
W.25
BMS-
1007 Triangular sign plate 900mm. Each. 1,759.00 18.13
W.26
BMS-
1008 Square sign plate 600mm. Each. 1,410.00 18.09
W.27
BMS-
1009 Square sign plate 1000mm. Each. 5,236.00 18.11
W.28
BMS- Supply of Polyethylene water storage tank double layer
1010 Litre. 8 33.33
W.29 conforming to IS: 12701-1996 with lid.
Design, fabrication & supply of light weight pre engineered
buildings for a maximum span of 9 metres with 50 x 50 x 2.8 mm
M.S hollow square tubes for columns, trusses & purlins walls with
sandwich panels made up of 2 Nos 10mm thick cement bonded
particle/ fibre board’s with 25mm thick 12 kg/cum density
expanded polystyrene in between encased in 1.25 mm thick
24x7x26 mm ‘W’ tracks in bottom & top and ‘H’ section for sides
with doors, windows & ventilators, roofing with 26 gauge pre
painted profiled sheets fixed with self tapping/ drilling screws,
painting with enamel paint for steel items, OBD for interiors and
ace for exteriors & providing base plates, templates & anchor
bolts along with civil foundation designs & drawings for the
Steel Structure: - Structure is made up of 50x50X 2.8
BMS-
1011 m/33x66x2.8mm thick hollow M.S. sections for Trusses, columns, 1 RM 395 16.18
W.30
and purloins. - Columns
Steel Structure: - Structure is made up of 50x50X 2.8
BMS-
1012 m/33x66x2.8mm thick hollow M.S. sections for Trusses, columns, 1 RM 1,807.00 16.06
W.31
and purloins. Trusses
10 mm thick 200x200 mm M.s. plates for base plates, 250 mm
BMS-
1013 long 12mm Φ anchor bolts with plate washer and nuts complete Each 687 16.05
W.32
with one coat of Asian or equivalent red oxide paint.
Sandwich panels: Sandwich panels of 50 mm thick with 25 mm
Thermocole of 12 kg / cum, fixed in between 2 Nos 10 mm
BMS-
1014 cement bonded wood particle / fibre boards properly fixed 1 Sqm 1,430.00 15.98
W.33
together with 30 mmx30mmx30mm wood pieces along width &
length wherever necessary
BMS- U' Tracks & 'H' Section:- Bottom & Top 'U' Tracks are made of
1015 1 RM 154 15.79
W.34 1.25 mm thick 120 GSM G.I. Sheet of size 24x51x26 mm size.
Fabricated 'H' sections are made up of 2 Nos 1.25 mm thick C.R.
BMS-
1016 Of 40 mm width for flanges and 1 Nos of 2 mm thick C.R. of 50 1 RM 222 16.23
W.35
mm width plate for web. will be used
Sandwich Panel joinery is made up of couplers or equivalent
BMS-
1017 made from 0.6 mm G.I. roll formed section to hold 2 Nos of 10 1RM 253 16.06
W.36
mm board on both sides with 25 mm Thermocole in between.
88
Total
Buildings Embedded
(%)
Window:- windows are made up of 51 x51 mm step 'U' section

made from 1.25 thick MS Cold rolled Steel Sheet and Windows
BMS-
1018 Shutters & Grill are made of 48x25mm mm size pre painted 1 Sqm 4,591.00 16.02
W.37
section with 4 mm glass complete with necessary hardware.
Grills are made from 8 mm square rod at 100 mm spacing.
Door Frames :-51 X 51 Stepped ' U' section made from 1.25 mm
BMS- thick C.R. section with a 32 mm rebate for 30 mm flush door and
1019 1 Sqm 4,394.00 16.03
W.38 Door Shutters with 30 mm thick block board / flush doors with
boiling water proof plywood complete with necessary Hard ware.
BMS- Ventilators: - Ventilators are made of 51x51 mm step 'U' section

1020 1 Sqm 4,917.00 16.02
W.39 made From 1.25 mm thick C.R. sheet with fixed louvers and glass.
BMS- Painting:-1) Steel structure is to be painted with 2 coats of Grade
1021 1 Sqm 124 15.89
W.40 I enamel paint.
BMS- 2) Exterior walls are painted with one coast of primer and 2
1022 1 Sqm 111 15.63
W.41 coats of exterior emulsion paint.
BMS-
1023 3) Interiors are painted with 1+2 coat of O.B.D. 1 Sqm 97 15.48
W.42
Toilets: - Toilets are provided as per plan with a provision for
BMS- fixing the wash basin, W.C. etc only is made with M.S. steel
1024 Each 1050 16.02
W.43 section secured to the walls with toilet bracket provision
excluding cost of WC/ Wash basin etc
Sun shades: - Sun shades will be provided wherever necessary
with 300 mm more than the width of window. 25x25 mm angle
BMS-
1025 frame to cover 450 mm in the front and the sides. 10mm cement Each 3,541.00 16.02
W.44
bonded particle board will be fixed on the frame work and sealed
with green paste or equivalent.
Roofing: - Roofing will be provided with 0.5mm thick galvanized
/ pre painted G.I. profiled sheets fixed to the purlins with 14 size
BMS- self drilling screws with neoprene washer. Side laps are stitched
1026 1 Sqm 799 15.97
W.45 with self tapping / drilling screws. End laps are to be sealed with
25x3 mm Butyl tape. The sheets are provided with anti capillary
grove.
Supply and fixing of factory made Bathroom door frames without
threshold, fabricated from pre-painted cold roll formed section
50mm x 50 mm made of galvanized (base steel as per IS – 513 ‘D’
quality, galvanized as per IS-277 with Zinc of 120 Grams/sqm)
steel colour coated sections with total coated thickness of 1 mm,
primer coated with epoxy primer of 5-7 microns thick, finish
painted with polyester paint of 12-16 microns and back coated
with alkyd backer of 5-7 microns and the frame section filled
with polyurethane (P.U. Foam) of 40 Kg/Cum; and the sections
cut to length and mitre joined by means of 1.25mm thick CRCA
electroplated corner brackets of size 75 x 75 mm and 1.25mm
thick electroplated stiffeners of size 150mm for fixing hold fasts
and hinges together with the following MS Power coated fitting
(Supply and fixing) of approved make.
a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat of
230mm long, 3 Nos each side expandable PVC covered screw
type fasteners
b) 2.5 mm x 300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm
two way but hinges (3 Nos for single leaf or 2 Nos for Double leaf
/leaf )
89
Total
Buildings Embedded
(%)
BMS- c) 12 mm Dia MS tie rod at bottom with necessary size of nuts on

1027 1 RM 428 15.99
W.46 either side.
BMS-
1028 Preparing gabions with jungle wood Each 3 0
W.47
BMS-
1029 Planting plants Each 2 0
W.48
BMS-
1030 Pruning plants Each 2 0
W.49
BMS- Maintaining avenues including fencing, weeding, mulching,
1031 Each 6 0
W.50 watering etc per plant.
BMS- - do - When scattered in hot weather with extra conveyance
1032 Each 7 0
W.51 from March to June
BMS-
1033 Hoisting or lowering of slab 1 cum 105 0
W.52
BMS-
1034 Dressing faces of granite stone (double line dressing) 1 Sqm 174 0
W.53
BMS-
1035 Dressing faces of other than granite stone(double line dressing) 1 Sqm 108 0
W.54
Supply of Pre-painted Galvalume Trapezoidal Profile Roofing
sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150
BMS- GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified
1036 1 Sqm 456 18.13
W.55 Polyester painting. Painting Thickness (Top): 18 to 20 Microns,
(Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum
12 Meters with Regular Range Colours
Supply of Pre-painted Galvalume Trapezoidal Profile Roofing
sheets with 0.47mm thickness, Coating: Alu-Zinc coating AZ150
BMS- GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified
1037 1 Sqm 445 18.04
Supply of Pre-painted Galvanized Trapezoidal Profile Roofing
sheets with 0.50mm thickness, Coating: Zinc coating Z120 GSM.
BMS- Tensile Strength: 300 MPA. Paint coating: Regular Modified
1038 1 Sqm 400 17.99
Supply of Pre-painted Galvanized Trapezoidal Profile Roofing
sheets with 0.47mm thickness, Coating: Zinc coating Z120 GSM.
BMS- Tensile Strength: 300 MPA. Paint coating: Regular Modified
1039 1 Sqm 376 18.24
Supply of Roof Accessories medium size: Ridge, Barge Cap,
BMS-
1040 Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.50mm 1 RM 307 18.08
W.59
thick, Width: 0.585, Length: Maximum 2½ Meters
Supply of Roof Accessories medium size: Ridge, Barge Cap,
BMS-
1041 Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.47mm 1 RM 274 18.1
W.60
thick, Width: 0.585, Length: Maximum 2½ Meters
BMS-
1042 75 mm long screws - 1 Each 4 33.33
W.61
BMS-
1043 G.I scam bolts & nuts 1 Each 5 25
W.62
BMS-
1044 G.I bolts & nuts 1 Each 5 25
W.63
BMS-
1045 G.I ‘J’ bolts 8 mm dia 1 Each 10 25
W.64
90
Total
Buildings Embedded
(%)
BMS-
1046 G.I Washers 1 Each 1 0
W.65
BMS-
1047 Limpet washers (for scam & ‘J’ bolts) 1 Each 0.5 18.13
W.66
BMS-
1048 Bitumen washers 1 Each 0.3 18.13
W.67
BMS-
1049 White Cement 1 Kg 29 26.09
W.68
BMS-
1050 MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA 1 Each 35 16.67
W.69
BMS-
1051 Rubber/ Nylon door stop bushes 1 Each 10 25
W.70
BMS-
1052 Nylon rollers for sliding glasses/ alluminium windows 1 Each 15 25
W.71
BMS-
1053 Powder coating or colour annodization - any section 1 RM 50 28.21
W.72
Continuous Piano Hinges Powder coated Mild steel as
BMS-
1054 per IS-3818 : 1992 of nominal size 25 mm (B) of 1 RM 35 29.63
W.73
thickness 0.8 to 1.0 mm
BMS-
1055 Box hinges for cup boards 1 Each 45 28.57
W.74
BMS-
1056 Magnetic Catchers 1 Each 15 25
W.75
BMS-
1057 Drilling holes in hard rock surfaces upto 18 mm dia 1 RM 210 0
W.76
BMS-
1058 Drilling holes in hard rock surfaces above 18 mm dia 1 RM 293 0
W.77
BMS- Making holes upto 18 mm dia in RCC/ any stones upto 50 mm
1059 1 Each 35 0
W.78 thick
BMS- Making holes above 18 mm dia in RCC/ any stones avbove 50 mm
1060 1 Each 49 0
W.79 thick
Pressure grouting the drilled holes with neat cement
BMS-
1061 slurry or with approved epoxy bonding agent using 1 Each 50 0
W.80
pump
MACHINERY CHARGES, HIRE CHARGES FOR CENTRING
BMC-
1062 Machine charges of rubbing/ polishing floor 1 day 2,145.00 0
X.01
BMC-
1063 Power Saw Cutter - Hand Operated - Hire charges 1 Hr 125 0
X.02
BMC-
1064 Power Drill - Hand Operated - Hire Charges 1 Hr 116 0
X.03
BMC-
1065 Grinding Mortar (Spl Grinding) 1 day 1,072.00 18.06
X.04
BMC-
1066 Casuarinas Balli Props - 3" to 4" dia - 12'-0" Height Each 73 0
X.05
BMC-
1067 Casuarinas Balli Props - 4" to 8" dia - 20'-0" Height Each 121 0
X.06
BMC-
1068 Wall Plate Brackets / beam bottom supports Each 212 0
X.07
BMC-
1069 Wedge Plate fixture Each 10 0
X.08
BMC-
1070 Runner beams of approximately 4" x 4" size RM 425 0
X.09
BMC-
1071 Steel Plates for form works 1 sqm 1,609.00 0
X.10
91
Total
Buildings Embedded
(%)
BMC-
1072 Scaffolding Pipes & Cantering accessories 1 Kg 121 0
X.11
BMC-
1073 Scaffold Boards - Bamboo scaffolds - Bamboos - 8'0" long Each 130 0
X.12
PLUMBING
A S.W.G. PIPES & FITTINGS
Supplying, laying, jointing and testing 101.6 mm SWG SP-1 pipes
of ISI make conforming to ISI 651 & 4127 with airtight cement
BMW-
1 joints in CM 1.5:1 prop. Including excavation of trenches and 1 RM 466 4.48
A.01
socket pits in any soil (except rock requiring blasting) up to 1524
mm(5'0") depth and refilling with watering and tamping.

BMW-
2 joints in CM 1:5:1 prop. including excavation of trenches and 1 RM 408 4.35
A.02
socket pits in any soil (except rock requiring blasting) up to
914.4 mm (3'0") depth and refilling with watering and tamping.

BMW-
3 joints in CM 1.5:1 prop. including excavation of trenches and 1 RM 680 4.45
A.03
socket pits in any soil (except rock requiring blasting) up to 1524
mm(5'0") depth and refilling with watering and tamping.

BMW-
4 joints in CM 1.5:1 prop. including excavation of trenches and 1 RM 614 4.42
A.04
socket pits in any soil (except rock requiring blasting) up to
914.4 mm (3'0")) depth and refilling with watering and tamping.
labour charges only for laying, jointing and testing SWG pipes of
any dia with airtight cement joints including excavation of
BMW-
5 trenches and socket pits in any soil up to 914.4 mm (3'0") depth 1 RM 216 0
A.05
(except rock requiring blasting) and refilling with watering and
tamping.
labour charges only for laying, jointing and testing SWG pipes of
any dia with airtight cement joints including excavation of
BMW-
6 trenches and socket pits in any soil up to 1524 mm (5'-0") depth 1 RM 268 0
A.06
(except rock requiring blasting) and refilling with watering and
tamping.
a)Supplying , laying, jointing and testing 152.4 mm CC bed
BMW- 1:2:4 Prop: using 19.05 mm gauge graded granite metal chips
7 1 RM 126 25.93
A.07 and cradling 101.6 mm SWG pipe line all round to have 76.2 mm
thick cover over the sockets.
BMW-
8 b) - do - labour charges only 1 RM 10 0
A.08
a)Supplying , laying, jointing and testing 152.4 mm CC bed 1:2:4
BMW- Prop: using 19.05 mm gauge graded granite metal chips and
9 1 RM 217 20.94
A.09 cradling 152.4 mm SWG pipe line all round to have 76.2 mm thick
cover over the sockets.
BMW-
A.10
a) Supplying & Laying 101.6 mm SWG channels with cement
BMW-
11 mortar joints with suitable brick masonry for fixing the channels 1 RM 87 2.99
A.11
in position
92
Total
Buildings Embedded
(%)
BMW-
A.12
a) Supplying & Laying 152.4 mm SWG channels with cement
BMW-
13 mortar joints with suitable brick masonry for fixing the channels 1 RM 163 3.51
A.13
in position
BMW-
A.14
BMW- Supply of SWG SP-1 pipe conforming to ISI 651 - 4" dia
15 1 RM 181 5.23
A.15 (101.6mm)
16 1 RM 314 5.02
A.16 (152.4mm)
17 1 RM 485 4.98
A.17 (203.2mm)
BMW- Supply of SWG SP-1 pipe conforming to ISI 651 - 10" dia (254
18 1 RM 888 4.96
A.18 mm)
19 1 RM 1,280.00 5
A.19 mm)
20 1 RM 1,742.00 5
A.20 mm)
21 1 RM 2,100.00 5
A.21 mm)
22 1 RM 2,536.00 5.01
A.22 mm)
23 1 RM 223 5.19
A.23 (101.6mm)
24 1 RM 332 5.06
A.24 (152.4mm)
25 1 RM 599 5.09
A.25 (203.2mm)
26 1 RM 941 5.02
A.26 mm)
27 1 RM 1,446.00 5.01
A.27 mm)
28 1 RM 1,875.00 4.98
A.28 mm)
29 1 RM 2,159.00 5.01
A.29 mm)
30 1 RM 2,756.00 4.99
A.30 mm)
31 1 RM 285 5.17
A.31 (101.6mm)
32 1 RM 415 5.06
A.32 (152.4mm)
33 1 RM 734 5.01
A.33 (203.2mm)
34 1 RM 1,115.00 4.99
A.34 mm)
35 1 RM 1,558.00 4.99
A.35 mm)
36 1 RM 1,979.00 4.99
A.36 mm)
37 1 RM 2,278.00 4.98
A.37 mm)
38 1 RM 3,099.00 5.02
A.38 mm)
93
Total
Buildings Embedded
(%)
BMW-
39 Supply of SWG Bends conforming to IS standards -100 mm dia Each 91 4.6
A.39
BMW-
40 Supply of SWG Bends conforming to IS standards -150 mm dia Each 168 5
A.40
BMW-
A.41
BMW-
A.42
BMW-
A.43
BMW-
A.44
BMW- Supply of SWG Junctions (T's & Y's) conforming to IS standards
45 Each 175 4.79
A.45 with length of barrel 60 cm for - 100 x 100
46 Each 258 4.88
47 Each 281 4.85
48 Each 400 4.99
49 Each 468 4.93
50 Each 537 5.09
51 Each 631 4.99
52 Each 833 5.04
53 Each 1031 4.99
54 Each 1,234.00 5.02
55 Each 900 5.02
56 Each 1,153.00 5.01
57 Each 1,405.00 5.01
58 Each 1,659.00 5
59 Each 1,911.00 5
60 Each 1,123.00 4.95
61 Each 1,440.00 5.03
62 Each 1,756.00 5.02
63 Each 2,070.00 5.02
64 Each 2,387.00 5.02
65 Each 2,701.00 5.02
BMW-
66 Supply of SWG Plugs conforming to IS standards for 100 mm dia Each 33 6.45
A.66
94
Total
Buildings Embedded
(%)
BMW-
67 Supply of SWG Plugs conforming to IS standards for 150 mm dia Each 63 5
A.67
BMW-
A.68
BMW-
A.69
BMW-
A.70
BMW-
A.71
Supplying & fixing 150 mm x 100 mm SWG gully traps
BMW- conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick
72 Each 568 4.41
A.72 masonry in CM 1:6 prop. Intermediate chamber and fitted with
304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover
BMW- Supply of SWG Gully Traps (Round & Square) conforming to IS
73 Each 254 4.96
A.73 standards 150 x 100 mm
Labour charges for fixing and laying the SWG Junctions/ Plugs/
BMW-
74 Bends of any dia with airtight cement joints as per standard Each 28 0
A.74
practice
BMW-
75 Supply of SWG Saddles conforming to IS standards 150 x 100 mm 184 5.14
A.75
BMW-
A.76
BMW-
A.77
MAN HOLES & INSPECTION CHAMBERS - AS PER - IS 4111 : Part
B
1 : 1986
Constructing 904.0 mm (3’0”) dia solid block masonry inspection
chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6)
prop using fly-ash blocks of 225 mm thick from approved source
having a minimum crushing strength of 10 N/sq.mm including
plastering with cement mortar 1:3 prop; ½” thick both inside and
outside fitted with 20” dia RCC manhole covers and frames
including excavating pits up to a depth of 904 mm (3'-0") in all
BMW- sorts of soils (excluding rock) and laying cement concrete (1:4:8)
78 Each 6,530.00 16.03
B.01 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching
and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand,
bricks, water etc., to site, cost of seigniorage charges on all
materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing
etc., complete for finished item of work as per Standard
specification.
95
Total
Buildings Embedded
(%)
Constructing 904.0 mm (3’0”) dia solid block masonry inspection

prop using fly-ash blocks of 225 mm thick from approved source
having a minimum crushing strength of 10 N/sq.mm including
plastering with cement mortar 1:3 prop; ½” thick both inside and
outside fitted with 20” dia RCC manhole covers and frames
including excavating pits up to a depth of 1524 mm (5'-0") in all
BMW- sorts of soils (excluding rock) and laying cement concrete (1:4:8)
79 Each 10,218.00 16.02
B.02 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching
and channel 100 mm thick as per Standard specification and
including cost and conveyance of all materials like cement, sand,
bricks, water etc., to site, cost of seigniorage charges on all
materials and all incidental and operational, labour charges like
mixing cement mortar, constructing masonry, lift charges, curing
etc., complete for finished item of work as per Standard
specification.
Constructing 904.0 mm (3’0”) dia brick masonry inspection
prop using 2nd Class Clay Bricks of 225 mm thick from approved
source having a minimum crushing strength of 5 N/sq.mm
including plastering with cement mortar 1:3 prop; ½” thick both
inside and outside fitted with 20” dia RCC manhole covers and
frames including excavating pits up to a depth of 904 mm (3'-0")
BMW- in all sorts of soils (excluding rock) and laying cement concrete
80 Each 6,237.00 16.02
B.03 (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all materials
like cement, sand, bricks, water etc., to site, cost of seigniorage
charges on all materials and all incidental and operational,
labour charges like mixing cement mortar, constructing
masonry, lift charges, curing etc., complete for finished item of
work as per Standard specification.
Constructing 904.0 mm (3’0”) dia brick masonry inspection
prop using 2nd Class Clay Bricks of 225 mm thick from approved
source having a minimum crushing strength of 5 N/sq.mm
including plastering with cement mortar 1:3 prop; ½” thick both
inside and outside fitted with 20” dia RCC manhole covers and
frames including excavating pits up to a depth of 1524 mm (5'-
BMW- 0") in all sorts of soils (excluding rock) and laying cement
81 Each 9,651.00 16.03
B.04 concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C.
1:2:4 benching and channel 100 mm thick as per Standard
specification and including cost and conveyance of all materials
like cement, sand, bricks, water etc., to site, cost of seigniorage
charges on all materials and all incidental and operational,
labour charges like mixing cement mortar, constructing
masonry, lift charges, curing etc., complete for finished item of
work as per Standard specification.
Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6
BMW- prop. Masonry Inspection chamber up to 914.4 mm (3'0") and
82 Each 6,091.00 16.02
B.05 fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I
frame and cover of 40 Kg.
96
Total
Buildings Embedded
(%)
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6

BMW- prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and
83 Each 3,672.00 16.02
B.06 fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I
frame and cover of 20 Kg.
BMW- a)Making drainage connection in the existing inspection
84 Each 117 6.42
B.07 including all repairs
BMW-
85 b) - do - labour charges only Each 71 0
B.08
C C.I. PIPES & FITTINGS - AS PER - IS 1729:1979
Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI
marked conforming to IS:1729-1979 of reputed make with
cement caulked joints and fixing as per site requirements
including painting black with Japan paint and fixing with
necessary wooden blocks fixed in the masonry walls in cement
mortar (1½:1) and including fixing of M.S. clamps if necessary
with required no. of Bombay nails etc., complete
BMW-
86 3" dia (76.2 mm) Single Socket 1 RM 760 16.03
C.01
BMW-
87 4" dia (101.6mm) Single Socket 1 RM 998 16.05
C.02
BMW-
88 6" dia (152.4mm) Single Socket 1 RM 1,598.00 16.05
C.03
BMW-
89 3" dia (76.2 mm) Double Socket 1 RM 831 16.06
C.04
BMW-
90 4" dia (101.6mm) Double Socket 1 RM 1109 16
C.05
BMW-
91 6" dia (152.4mm) Double Socket 1 RM 1,841.00 16.01
C.06
Labour charges only for fixing of C.I. Single/ Double Socket soil
pipes of any dia with cement caulked joints and fixing as per site
BMW- requirements including painting black with Japan paint and
92 1 RM 211 0
C.07 fixing with necessary wooden blocks fixed in the masonry walls
in cement mortar and including fixing of M.S. clamps if necessary
with required nails
Supplying & fixing CI Plain bends Ist quality ISI marked
BMW- conforming to IS:1729-1979 with cement caulked joints and
93 Each 296 16.08
C.08 fixing as per site requirements with standard practice for 3" dia
(76.2 mm)
94 Each 376 16.05
(101.6 mm)
95 Each 624 15.99
(152.4 mm)
Supplying & fixing CI Plug (Door) bends Ist quality ISI marked
96 Each 367 16.14
(76.2 mm)
97 Each 455 16.07
(101.6 mm)
97
Total
Buildings Embedded
(%)
98 Each 994 16.7
(152.4 mm)
Labour charges only for fixing CI Plain/ Plug (Door) bends with
BMW-
99 cement caulked joints and fixing as per site requirements with Each 67 0
C.14
standard practice
Supplying and fixing of 76.2 mm (3") CI soil single junction with
BMW-
100 plug : conforming to IS:1729-1979 with cement caulked joints Each 462 16.08
C.15
and fixing
BMW-
C.16
and fixing
BMW-
102 plug : conforming to IS:1729-1979 with cement caulked joints Each 1,714.00 16.05
C.17
and fixing
Supplying and fixing of 76.2 mm (3") CI soil plain single junction :
BMW-
103 conforming to IS:1729-1979 with cement caulked joints and Each 388 16.17
C.18
fixing
Supplying and fixing of 101.6 mm (4") CI soil plain single junction
BMW-
104 : conforming to IS:1729-1979 with cement caulked joints and Each 531 15.94
C.19
fixing
Supplying and fixing of 152.4 mm (6") CI soil plain single junction
BMW-
105 : conforming to IS:1729-1979 with cement caulked joints and Each 1,276.00 16
C.20
fixing
Labour charges only fixing CI soil single junctions with cement
BMW-
106 caulked joints and fixing as per site requirements with standard Each 91 0
C.21
practice
Supplying and Fixing of 76.2 mm (3") CI soil Double junction with
BMW-
C.22
and fixing
Supplying and Fixing of 101.6 mm (4") CI soil Double junction
BMW-
108 with plug : conforming to IS:1729-1979 with cement caulked Each 555 16.11
C.23
joints and fixing
Supplying and Fixing of 152.4 mm (6") CI soil Double junction
BMW-
109 with plug : conforming to IS:1729-1979 with cement caulked Each 1,999.00 16.02
C.24
joints and fixing
Supplying and Fixing of 76.2 mm (3") CI soil plain Double
BMW-
110 junction : conforming to IS:1729-1979 with cement caulked Each 608 16.03
C.25
joints and fixing
BMW-
111 junction : conforming to IS:1729-1979 with cement caulked Each 799 15.97
C.26
joints and fixing
BMW-
112 junction : conforming to IS:1729-1979 with cement caulked Each 1,872.00 16.06
C.27
joints and fixing
Labour charges only fixing CI soil Double junctions with cement
BMW-
113 caulked joints and fixing as per site requirements with standard Each 84 0
C.28
practice
Supplying and Fixing of 75mm C.I. Offsets Ist quality conforming
BMW-
114 to IS:1729-1979 with cement caulked joints and fixing -for 76.20 Each 298 15.95
C.29
mm (3") C.I. Pipe
BMW-
C.30
mm (4") C.I. Pipe
98
Total
Buildings Embedded
(%)

BMW-
C.31
mm (6") C.I. Pipe
Supplying and Fixing of 115 mm C.I. Offsets Ist quality
BMW-
C.32
fixing - for 76.20 mm (3") C.I. Pipe
BMW-
C.33
BMW-
C.34
BMW-
C.35
fixing for 76.20 mm (3") C.I. Pipe
BMW-
C.36
BMW-
C.37
BMW- Labour charges only fixing CI soil Offsets with cement caulked
123 Each 42 0
C.38 joints and fixing as per site requirements with standard practice
Supplying & fixing CI floor traps 1st quality ISI marked
BMW- conforming to IS:1729-1979 with C.P. Grating fixing with white
124 Each 539 15.91
C.39 cement as per site requirements with standard practice for 100
mm dia Inlet- 75 mm (3") outlet pipe
Supplying & fixing CI floor traps 1st quality ISI marked
125 Each 660 15.99
mm dia Inlet - 100 mm (4") outlet pipe
Supplying & fixing CI Nahany traps 1st quality ISI marked
126 Each 329 15.85
mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs
Labour charges only for fixing CI Nahany/ Floor traps with C.P.
BMW-
127 Grating fixing with white cement as per site requirements with Each 55 0
C.42
standard practice
BMW-
128 Boxing of Nahany traps in RCC floors Each 178 0
C.43
BMW-
129 Boxing of W.C Trap in R.C.C floors Each 356 0
C.44
Supplying & fixing CI Collars (double socket) Ist quality ISI
BMW- marked conforming to IS:1729-1979 with cement caulked joints
130 Each 181 16.03
C.45 and fixing as per site requirements with standard practice for
76.20 mm (3") C.I. Pipe
131 Each 227 15.82
101.6 mm (4") C.I. Pipe
132 Each 652 16.01
152.4 mm (6") C.I. Pipe
99
Total
Buildings Embedded
(%)
VITREOUS CHINAWARE - SANITARY APPLIANCES as per IS:2556

D
- 1974
Supplying & Fixing Indian pattern white glazed W.C 1st quality
BMW-
133 ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" Each 953 25.23
D.01
trap Hindware/ Parryware/ Neycer - ISI Mark: 580 mm Long
Supplying & Fixing Indian pattern white glazed W.C 1st quality
BMW-
134 ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" Each 953 9.57
D.02
trap Hindware/ Parryware/ Neycer - ISI Mark: 630 mm Long
BMW- Labour charges only for fixing Indian pattern W.C with "P" or "S"
135 Each 581 0
D.03 trap
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI
BMW-
136 marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Each 1,440.00 20.36
D.04
Hindware/ Parryware/ Neycer - ISI Mark: 580 mm x 440 mm
Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI
BMW-
137 marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Each 1,514.00 20.75
D.05
Hindware/ Parryware/ Neycer - ISI Mark: 630 mm x 450 mm
BMW-
138 Labour charges only Fixing Orissa pan W.C with "P" or "S" trap Each 351 0
D.06
Supplying & Fixing porcelain foot rest for squatting I.W.C.
BMW- (Rectangular pair) of sizes 250 mm x 125 mm x 15 mm thick
139 Pair 231 19.29
D.07 each foot rest 1st quality ISI marked conforming to IS:2556-Part-
10:1974
BMW- Labour charges only for fixing porcelain foot rest for squatting
140 Pair 64 0
D.08 I.W.C. (Rectangular pair)
BMW- Providing Brick masonry seat for Orissa pan/ Indian W.C. using
141 Each 298 18.25
D.09 2nd class bricks as per standard practice
BMW- Providing Cement Concrete Squatting plate for Orissa pan/
142 Each 89 28.99
D.10 Indian W.C. in P.C.C. 1:2:4 as per standard practice
Supplying & Fixing low down porcelain flushing tank 10 Lit
BMW-
143 Capacity Hindustan Sanitary ware/ parry/ Neycer with internal Each 2,304.00 21.36
D.11
components
BMW- Labour charges only for fixing low down porcelain flushing tank
144 Each 491 0
D.12 with internal components
Supplying and Fixing European Water Closet of 1st quality
BMW-
145 conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Each 1,691.00 23.63
D.13
Parryware make white glazed with 'P' trap
Supplying and Fixing European Water Closet of 1st quality
BMW-
146 conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Each 1,785.00 23.89
D.14
Parryware make white glazed with 'S' trap
BMW- Labour charges only for fixing European Water Closet with 'P' or
147 Each 246 0
D.15 'S' trap as per standard practice
Supplying and Fixing best Indian make plastic seat and lid for
BMW-
148 European water closets with rubber or plastic Buffers as per IS Each 461 23.34
D.16
2548-1996
BMW- Labour charges only for fixing plastic seat and lid for European
149 Each 71 0
D.17 water closet
100
Total
Buildings Embedded
(%)
Supply, Installation and commissioning approved make floor

mounted EWC (suit) CASCADE model 'P' or 'S' trap with dual
flush porcelain cistern fixed on EWC with all internal parts of
BMW-
150 dual flush cistern, ultra solid seat cover of approved make with Each 8,808.00 25.2
D.18
rubber buffer and cap 15 mm angle stop cock 450 mm long PVC
inter connection pipe wall flanges all of approved make etc.
complete for finished item of work in all respects: White Colour
BMW- dual flush cistern, ultra solid seat cover of approved make with
151 Each 12,872.00 25.2
D.19 rubber buffer and cap 15 mm angle stop cock 450 mm long PVC
complete for finished item of work in all respects: Coloured -
Grade - I/ Grade - II
BMW- dual flush cistern, ultra solid seat cover of approved make with
152 Each 16,395.00 25.2
D.20 rubber buffer and cap 15 mm angle stop cock 450 mm long PVC
complete for finished item of work in all respects: Special Colour -
Grade - III
Supplying & Fixing Indian make Flat Back Wash Hand Basin
(HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-
Part-4:1972 with waste fittings like rubber plug, chain, 32 mm
nominal size C.P. Fitting with parallel pipe thread conforming to
BMW-
153 IS:2963-1979 and fitted with 15 mm nominal bore Chromium Each 2,466.00 25.18
D.21
Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/
Senior/ Nice/ Esso or equivalent complete with standard CI
brackets including wooden block: 660 x 460 mm - Single C.P.
Pillar cock
BMW-
D.22
Pillar cock
BMW-
D.23
brackets including wooden block: 630 x 450 mm - Double C.P.
Pillar cock
101
Total
Buildings Embedded
(%)
BMW-
D.24
Pillar cock
BMW-
D.25
Pillar cock
BMW-
D.26
Pillar cock
BMW-
D.27
Pillar cock
Labour charges only for fixing Indian make Flat Back Wash Hand
BMW- Basin with waste fittings like rubber plug, chain, 32 mm nominal
160 Each 351 0
D.28 size C.P. Fitting Pillar Taps complete with standard CI brackets
including wooden block
BMW- Supplying and Fixing Pedestal for Wash Hand Basin (H.S.W /
161 Each 1,142.00 24.81
D.29 Parry / Earthenware)
BMW-
162 Labour charges only for fixing pedestal for wash hand basin Each 127 0
D.30
BMW- Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type)
163 Each 451 24.9
D.31 Parryware or equivalent
BMW-
164 Labour charges only for fixing bottle trap to the wash hand basin Each 49 0
D.32
Supplying & Fixing white glazed flat back Bowl urinals of size 440
BMW- mm x 265 mm x 315 mm with internal flushing rim fixed with
165 Each 845 25.19
D.33 screws complete Indian make (HSW/Parry/Neycer) conforming
to IS:2556-1995
102
Total
Buildings Embedded
(%)
Supplying & Fixing white glazed flat back half stall urinals 1st
quality conforming to IS:2556-1995 with standard C.P. Spreader
BMW-
166 of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec- Each 2,536.00 25.23
D.34
6-1974 fixed with screws complete Indian make
(HSW/Parry/Neycer) : 410 x 265 x 305 mm
Supplying & Fixing white glazed flat back half stall urinals 1st
quality conforming to IS:2556-1995 with standard C.P. Spreader
BMW-
167 of overall size 95 x 95 x 57 mm conforming to IS:2556-Part6, Sec- Each 2,818.00 26.99
D.35
6-1974 fixed with screws complete Indian make
(HSW/Parry/Neycer) : 590 x 375 x 390 mm
BMW- Labour charges only Fixing flat back Bowl/ Half stall urinals with
168 Each 140 0
D.36 fixing C.P. Spreader and screws complete
Supplying & Fixing Indian make white glazed vitreous china
porcelain sink conforming to IS:2556-Part-5-1994 on cantilever
BMW-
169 brackets with waste fittings like rubber plug, chain, 32 mm Each 4,508.00 25.99
D.37
IS:2963-1979 : 600 x 400 x 250
Supplying & Fixing Indian make white glazed vitreous china
porcelain sink conforming to IS:2556-Part-5-1994 on cantilever
BMW-
170 brackets with waste fittings like rubber plug, chain, 32 mm Each 5,072.00 26.29
D.38
IS:2963-1979 : 750 x 450 x 250
BMW- Labour charges only for fixing Vitreous china porcelain sinks
171 Each 351 0
D.39 with waste fittings, rubber plug, chain, cantilever brackets etc.
a) S & F 609.6 x 457.2 x 254 mm RCC terrazzo finished sink (or
BMW-
172 constructed at site with 50.8mm thick) brass plug and chain Each 719 18.16
D.40
including CI cantilever brackets
BMW-
D.41
E TAPS & FAUCETS
BMW- a) S & F 12.7 mm NP stop cock Indian make heavy duty Seiko/
174 Each 474 16.83
E.01 Senior/ Nice/ Senior/ Nice or equivalent
BMW-
E.02
BMW- a) S & F concealed stop cock 12.7 mm (1/2") Indian Make heavy
176 Each 542 16.45
E.03 duty Seiko/ Senior/ Nice or equivalent
BMW-
E.04
BMW- a) S & F angle stop cock 12.7 mm dia first quality Indian Make
178 Each 474 16.21
E.05 heavy duty Seiko/ Senior/ Nice or equivalent
BMW-
E.06
BMW- a) S&F 12.7 mm N.P bib tap Indian make heavy dutys Seiko/
180 Each 407 16.62
E.07 Senior/ Nice or equivalent
BMW-
E.08
BMW-
182 a) S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 258 15.77
E.09
BMW-
E.10
BMW-
184 a)S & F 31.75 mm brass plumber Union best Indian first quality Each 69 21.7
E.11
BMW-
E.12
BMW-
186 a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 231 24.32
E.13
103
Total
Buildings Embedded
(%)
BMW-
E.14
BMW-
188 a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 204 23.74
E.15
BMW-
E.16
BMW-
190 a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 231 24.32
E.17
BMW-
E.18
BMW-
192 a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 204 23.74
E.19
BMW-
E.20
BMW- S & F CP Long body bib cock fancy type deluxe heavy duty 12.7
194 Each 637 16.03
E.21 mm dia Indian make Seiko/ Senior/ Nice or equivalent
BMW- S & F CP Short body bib cock fancy type deluxeheavy duty 12.7
195 Each 611 15.94
E.22 mm dia Indian make Seiko/ Senior/ Nice or equivalent
BMW- S & F 12.7mm heavy duty dia high neck pillar cock 1st quality
196 Each 1,165.00 16.04
E.23 Indian make Seiko/ Senior/ Nice or equivalent
BMW- a) S & F 12.7 mm heavy duty NP Swan Neck Pillar cock Seiko/
197 Each 1,165.00 17.23
E.24 Senior/ Nice or equivalent
BMW-
E.25
BMW- a) S & F 12.7 mm heavy duty NP Sink cock Seiko/ Senior/ Nice or
199 Each 1,165.00 17.49
E.26 equivalent
BMW-
E.27
BMW- S&F 12.7 mm dia NP pillar cock heavy duty Ist quality Indian
201 Each 611 15.94
E.28 make Seiko/ Senior/ Nice or equivalent
BMW-
202 S&F 12.7 mm dia NP push cock Ist quality Each 271 15.81
E.29
BMW-
203 S&F 12.7 mm dia NP lift cock Ist quality Each 237 16.18
E.30
BMW- a)S & F 38.1 mm C.P waste coupling Half or Full Thread 1st
204 Each 237 15.56
E.31 Quality Indian make Parryware or equivalent
BMW-
E.32
BMW-
206 a) S & F 31.75 mm PVC bottle trap Each 142 21.65
E.33
BMW-
E.34
BMW-
208 a) S& F 38.1 mm brass plumber union Each 69 21.7
E.35
BMW-
E.36
BMW- a)S & F 19.05 mm heavy duty NP stop cock Indian make with ISI
210 Each 611 27.07
E.37 mark Seiko/ Senior/ Nice or equivalent
BMW-
E.38
F G.I. PIPES & FITTINGS
BMW-
212 S& F GI union 12.7 mm Ist Quality Each 41 17.14
F.01
BMW-
F.02
104
Total
Buildings Embedded
(%)
BMW-
F.03
BMW-
F.04
BMW-
F.05
BMW-
F.06
BMW-
218 S& F GI connector 25.4 mm dia Each 82 15.49
F.07
BMW-
219 S& F 12.7 mm GI 'T' A class Ist quality Each 50 16.28
F.08
BMW-
220 S& F 31.75 mm dia GI bend Ist quality Each 75 15.38
F.09
BMW-
221 S & F 31.75 mm dia GI 'T' 1st Quality Each 74 15.63
F.10
BMW- a) S & F 25.4 mm copper ball cock ith PVC ball Indian make ISI
222 Each 426 15.95
F.11 mark
BMW-
F.12
BMW- a) S & F 19.05 mm copper ball cock ith PVC ball Indian make ISI
224 Each 349 15.66
F.13 mark
BMW-
F.14
BMW- a)S & F 12.7 mm copper ball cock ith PVC ball Indian make ISI
226 Each 226 14.1
F.15 mark
BMW-
F.16
BMW- a) S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I,
228 Each 914 17.1
F.17 Indian make heavy type - 25 mm NB Size
BMW-
F.18
230 Each 621 16.63
BMW-
F.20
232 Each 459 16.11
BMW-
F.22
234 Each 1,368.00 17.44
BMW-
F.24
236 Each 1,864.00 17.36
BMW-
F.26
238 Each 2,692.00 17.41
BMW-
F.28
240 Each 5,135.00 17.66
BMW-
F.30
105
Total
Buildings Embedded
(%)
242 Each 7,268.00 17.73
BMW-
F.32
BMW- a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non
244 Each 402 15.22
F.33 return) Valve as per IS-778 I-class heavy duty - 15 mm NB Size
BMW-
F.34
246 Each 858 16.48
BMW-
F.36
248 Each 1,884.00 16.87
BMW-
F.38
250 Each 2,706.00 17.25
BMW-
F.40
252 Each 555 16.08
BMW-
F.42
BMW- a) Supplying & fixing Gunmetal (GM) Vertical Check (Non return)
254 Each 307 14.48
F.43 Valve as per IS-778 I-class heavy duty - 15 mm NB Size
BMW-
F.44
256 Each 410 15.37
BMW-
F.46
258 Each 541 16.03
BMW-
F.48
260 Each 808 16.71
BMW-
F.50
262 Each 1217 17.18
BMW-
F.52
106
Total
Buildings Embedded
(%)
264 Each 1,761.00 17.47
BMW-
F.54
BMW- a) S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as
266 Each 476 15.75
F.55 per IS - Class - I, Indian make heavy type - 15 mm NB Size
BMW-
F.56
268 Each 621 16.29
BMW-
F.58
270 Each 912 16.87
BMW-
F.60
272 Each 1,655.00 17.43
BMW-
F.62
274 Each 2,484.00 17.66
BMW-
F.64
276 Each 4,345.00 17.86
BMW-
F.66
a) S& F 15 mm Nominal Bore GI pipe Light Grade properties &
BMW-
278 weight as per IS 1239 ISI mark with GI fittings including the cost 1 RM 167 13.09
F.67
of pipe & its fittings & labour charges complete
BMW-
F.68
BMW-
F.69
BMW-
F.70
BMW-
F.71
BMW-
F.72
BMW-
F.73
BMW-
F.74
BMW-
F.75
BMW-
F.76
107
Total
Buildings Embedded
(%)

BMW-
F.77
BMW-
F.78
a) S& F 15 mm Nominal Bore GI pipe Medium Grade properties &
BMW-
F.79
BMW-
F.80
BMW-
F.81
BMW-
F.82
BMW-
F.83
BMW-
F.84
BMW-
F.85
BMW-
F.86
BMW-
F.87
BMW-
F.88
BMW-
F.89
BMW-
F.90
S & F 65 mm Nominal Bore GI pipe Medium Grade properties &
weight as per IS 1239 with GI fittings such as elbows tees
BMW- couplings, nipples, plugs including excavation for trenches and
302 1 RM 811 16.02
F.91 refilling the trenches complete except for GI bends union and GI
connectors with checkout and socket Tata or Zenith make or
equivalent.
BMW-
303 a)S & F 12.7 mm holder bat clamps Each 12 5.39
F.92
BMW-
F.93
BMW-
F.94
BMW-
F.95
108
Total
Buildings Embedded
(%)
BMW-
F.96
BMW-
F.97
BMW-
F.98
BMW-
F.99
BMW-
311 a) S & F 12.7 x 152.0 mm NP shower rose heavy Each 186 15.87
F.100
BMW-
F.101
BMW-
F.102
BMW-
F.103
BMW-
F.104
BMW-
F.105
BMW-
317 a) S & F 12.7 x 88.9 CP fancy shower Each 303 16.59
F.106
BMW-
F.107
BMW- a) Supplying & fixing 12.7 mm GI drain pipe with plug for tanks
319 Each 43 8.1
F.108 (Mud valve) including making a hole
BMW-
F.109
321 Each 62 11.29
BMW-
F.111
323 Each 74 11.57
BMW-
F.113
BMW- a) Taking branch water connection from the existing 25.4 mm GI
325 Each 144 12.33
F.114 pipe including cutting threading, etc, complete with fitting
BMW-
F.115
BMW- a) Taking branch water connection from the existing 19.05 mm
327 Each 82 9.42
F.116 GI pipe including cutting threading, etc, complete with fitting,
BMW-
F.117
BMW- a) Taking branch water connection from the existing 12.7 mm GI
329 Each 62 8.31
F.118 pipe including cutting threading, etc, complete with fitting,
BMW-
F.119
BMW- Supplying & fixing leather washers for 12.7 mm bib tap and stop
331 Each 1 0
F.120 cock
BMW- Supplying & fixing leather washers for 19.05 mm bib tap and
332 Each 3 0
F.121 stop cock
BMW-
333 Supplying & Fixing 12.7 mm fibre washers Each 3 0
F.122
109
Total
Buildings Embedded
(%)
BMW-
334 Supplying & Fixing 19.05 mm fibre washers Each 3 0
F.123
G PVC PIPES & FITTINGS
a) Providing & Placing on Terrace (at all floor levels)
polyethylene water storage tank with Double layer approved
BMW-
335 brand & manufacture with cover and suitable locking 1 Lit 6 14.66
G.01
arrangement & making necessary holes for inlet & outlets and
over flow pipes but without fittings & base support for tanks
BMW-
336 b) - do - labour charges only 1 Lit 1 0
G.02
BMW-
337 Supply of Plastic storage tank lid with hinges Each 76 15.15
G.03
BMW-
338 Supply & Fixing 76.2 mm dia PVC elbow Ist quality Each 47 14.63
G.04
BMW- Supply & fixing 31.75 mm dia PVC flexible waste pipe of 914.4
339 Each 26 18.18
G.05 mm length of Ist quality
BMW-
340 Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet Each 89 15.58
G.06
BMW-
341 Supply & fixing Fancy PVC shelf including all fittings Each 212 15.85
G.07
Supply & fixing of PVC low level system parry ware, slim line with
BMW-
342 internal components & short bend: 10 Litres capacity Single Each 1,455.00 16.03
G.08
Flush
BMW- Supply & fixing of PVC low level system parry ware, slim line with
343 Each 1,708.00 16.03
G.09 internal components & short bend: 10 litres capacity Dual Flush
BMW- Supply & fixing of PVC low level system parry ware, slim line with
344 Each 823 16.08
G.10 internal components & short bend: 8 Litres capacity single Flush
BMW- 75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm -
345 Each 255 18.06
G.11 Prince/Sudhakar/Kisan/Supreme or any ISI Brand
BMW- 90 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm -
346 Each 405 18.08
347 Each 484 18.05
BMW- 75 mm dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm -
348 Each 288 18.03
349 Each 459 17.99
350 Each 562 18.07
BMW- 75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe - 4
351 Each 179 17.76
G.17 Kg/sq.cm - Prince/Sudhakar/Kisan/Supreme or any ISI Brand
352 Each 277 18.38
353 Each 344 18.21
BMW- 75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe - 4

354 Each 191 17.9

355 Each 294 18.07
110
Total
Buildings Embedded
(%)

356 Each 356 18.27
BMW- 75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe - 4
357 Each 132 17.86
358 Each 202 18.13
359 Each 243 17.96
BMW- 75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 4
360 Each 111 18.09
361 Each 163 18.12
362 Each 210 17.98
363 Each 67 17.54
364 Each 112 17.89
365 Each 140 17.65
BMW- 160 MM dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm -
366 Each 1,153.00 18.14
367 Each 432 18.03
BMW- 90 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm -
368 Each 696 18.17
369 Each 828 18.12
370 Each 473 18.25
371 Each 750 18.11
372 Each 914 18.09
373 Each 284 18.33
374 Each 441 18.23
375 Each 525 18.24

376 Each 303 17.9

377 Each 459 17.99

378 Each 567 18.13
379 Each 205 17.82
111
Total
Buildings Embedded
(%)

380 Each 318 18.22
381 Each 387 17.99
382 Each 177 18
383 Each 260 18.18
384 Each 314 18.05
385 Each 114 17.53
386 Each 178 17.88
387 Each 227 18.23
388 Each 1,885.00 18.11
BMW- 75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings
389 Each 50 19.05
G.55 (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
390 Each 70 18.64
391 Each 83 18.57
BMW- 75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings
392 Each 67 17.54
393 Each 95 18.75
394 Each 107 17.58
BMW- 75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings
395 Each 39 18.18
396 Each 54 17.39
397 Each 70 18.64
BMW- 75 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings
398 Each 67 17.54
399 Each 98 18.07
400 Each 118 18
BMW- 75 mm dia - Single Tee - UPVC/SWR Pipe fittings
401 Each 59 18
402 Each 89 18.67
403 Each 108 18.68
BMW- 75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings
404 Each 73 17.74
405 Each 108 18.68
112
Total
Buildings Embedded
(%)
406 Each 130 18.18
BMW- 75 mm dia - Double Tee - UPVC/SWR Pipe fittings
407 Each 125 17.92
408 Each 183 18.06
409 Each 260 18.18
BMW- 75 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings
410 Each 200 18.34
411 Each 286 18.18
412 Each 295 18
BMW- 75 mm dia - Single 'Y' - UPVC/SWR Pipe fittings
413 Each 74 17.46
414 Each 118 18
415 Each 136 18.26
BMW- 75 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings
416 Each 95 18.75
417 Each 149 18.25
418 Each 171 17.93
BMW- 75 mm dia - Double 'Y' - UPVC/SWR Pipe fittings
419 Each 102 18.6
420 Each 158 17.91
421 Each 179 17.76
BMW- 75 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings
422 Each 132 17.86
423 Each 206 18.39
424 Each 231 17.86
BMW- 75 mm dia - Coupler - UPVC/SWR Pipe fittings
425 Each 35 16.67
426 Each 51 18.6
427 Each 57 18.75
BMW- 90 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings
428 Each 59 18
429 Each 57 18.75
430 Each 79 17.91
BMW- 63 mm dia - Vent Cowl - UPVC/SWR Pipe fittings
431 Each 9 12.5
432 Each 14 16.67
433 Each 17 21.43
113
Total
Buildings Embedded
(%)

434 Each 19 18.75
40 mm dia - Pipe Clip - UPVC/SWR Pipe fittings
BMW- (Prince/Sudhakar/Kisan/Supreme or any ISI Brand) - Pipe Clip -
435 Each 11 22.22
G.101 UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme or
any ISI Brand)
BMW- 50 mm dia - Pipe Clip - UPVC/SWR Pipe fittings
436 Each 14 16.67
437 Each 14 16.67
438 Each 15 15.38
439 Each 17 21.43
BMW- 110 mm - Pipe Clip - UPVC/SWR Pipe fittings
440 Each 18 20
441 Each 35 16.67
BMW- P' Trap ( Small without Air vent ) 110 mm - UPVC/SWR Pipe
442 Each 188 18.24
G.108 fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
BMW- P' Trap ( Small with Air vent ) 110 mm - UPVC/SWR Pipe fittings
443 Each 208 18.18
BMW- P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe fittings
444 Each 238 18.41
BMW- P' Trap ( Big without Air vent ) 110 mm - UPVC/SWR Pipe
445 Each 219 18.38
G.111 fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
BMW- Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings
446 Each 227 18.23
BMW- Bell Mouth Trap 7 " ( 177.8 mm) - UPVC/SWR Pipe fittings
447 Each 330 18.28
BMW- 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR
448 Each 112 17.89
G.114 Pipe fittings (Prince/Sudhakar/Kisan/Supreme or any ISI Brand)
3" (76.2 mm ) Nahany Trap ( without Jali without
BMW-
449 inlet)UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme Each 87 17.57
G.115
or any ISI Brand)
4" (101.6 mm ) Nahany Trap ( without inlet with out
BMW-
450 Jali)UPVC/SWR Pipe fittings (Prince/Sudhakar/Kisan/Supreme Each 108 18.68
G.116
or any ISI Brand)
BMW- Mini Trap - UPVC/SWR Pipe fittings
451 Each 53 17.78
BMW- 3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings
452 Each 102 18.6
BMW- 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings
453 Each 144 18.03
BMW- 4" (101.6) multi floor trap with out Jalli- UPVC/SWR Pipe fittings
454 Each 112 17.89
BMW- Round Jali - UPVC/SWR Pipe fittings
455 Each 24 20
BMW- Square tile & Jalli - UPVC/SWR Pipe fittings
456 Each 39 18.18
BMW- Pipe connector ( with LIP ring) - UPVC/SWR Pipe fittings
457 Each 151 17.97
BMW- Pipe connector ( with out LIP ring) - UPVC/SWR Pipe fittings
458 Each 117 18.18
114
Total
Buildings Embedded
(%)
BMW- 4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings

459 Each 138 17.95
BMW- 5" (127.mm ) floor Trap - UPVC/SWR Pipe fittings
460 Each 146 17.74
BMW- 75 mm dia - Door cap - UPVC/SWR Pipe fittings
461 Each 57 18.75
462 Each 64 18.52
463 Each 74 17.46
BMW- 75 mm dia - Socket plug - UPVC/SWR Pipe fittings
464 Each 53 17.78
465 Each 61 17.31
466 Each 64 18.52
BMW- 75 mm dia - Rubber ring for Socket - UPVC/SWR Pipe fittings
467 Each 8 14.29
468 Each 9 12.5
469 Each 11 22.22
BMW- 75 mm dia - Door Socket - UPVC/SWR Pipe fittings
470 Each 9 12.5
471 Each 11 22.22
472 Each 14 16.67
BMW- LIP ring 110 mm - UPVC/SWR Pipe fittings
473 Each 69 18.97
BMW-
474 Rubber Lubricant - 100 Grams Each 29 26.09
G.140
BMW-
475 Rubber Lubricant - 250 Grams Each 65 30
G.141
BMW-
G.142
BMW-
G.143
BMW- P' Trap with lip UPVC/SWR Pipe fittings
478 Each 298 18.25
BMW-
479 50 ml - Solvent Cement Each 15 25
G.145
BMW-
480 100 ml - Solvent Cement Each 25 31.58
G.146
BMW-
G.147
BMW-
G.148
BMW-
G.149
BMW- 110mm x 90 mm - Internal Reducer - UPVC/SWR Pipe fittings
484 Each 90 18.42
BMW- 160 mm x 110 mm - Internal Reducer - UPVC/SWR Pipe fittings
485 Each 224 17.89
115
Total
Buildings Embedded
(%)
Labour charges for laying, fixing and commissioning the PVC

BMW- pipes including couplers/ bends/ tees etc any diameter including
486 1 RM 65 0
G.152 fixing necessary fittings like bends, plugs, couplers, junctions,
tees, etc with solvent jointing as per standard practice
CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER IS: 3989 -
H
1984
BMW-
487 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1,500.00 18.11
H.01
BMW-
H.02
BMW-
H.03
BMW- 75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Double
490 Each 1,665.00 18.09
H.04 socket
BMW- 100 mm dia CI (spun) soils Waste & Ventilating pipe (3 M)
491 Each 2,247.00 18.14
H.05 Double socket
BMW-
492 75 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 1,349.00 18.13
H.06
BMW-
H.07
BMW-
H.08
BMW-
H.09
BMW-
496 75 mm dia 6'-0" (1828.8 mm) CI (Spun) pipes Each 982 18.17
H.10
BMW-
H.11
BMW-
498 75 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 1032 18.08
H.12
BMW-
499 100 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 1,281.00 18.17
H.13
BMW-
500 75 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) fittings Each 358 18.15
H.14
BMW- 100 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun)
501 Each 411 18.1
H.15 fittings
BMW-
502 75 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) fittings Each 513 18.2
H.16
BMW- 100 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun)
503 Each 589 18.04
H.17 fittings
BMW- 150 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun)
504 Each 1125 18.17
H.18 fittings
BMW- 75 mm dia Cut pipes (pieces ) 2 feet (609.6 mm) CI (Spun)
505 Each 707 18.03
H.19 fittings
506 Each 781 18.15
H.20 fittings
507 Each 1,409.00 18.11
H.21 fittings
508 Each 1084 18.08
H.22 fittings
509 Each 1,463.00 18.08
H.23 fittings
510 Each 1,193.00 18.12
H.24 fittings
116
Total
Buildings Embedded
(%)
511 Each 1,785.00 18.13
H.25 fittings
BMW-
512 75 mm dia Plain Bend - CI (Spun) fittings Each 368 17.95
H.26
BMW-
H.27
BMW-
H.28
BMW-
515 75 mm dia Door Bend - CI (Spun) fittings Each 381 17.96
H.29
BMW-
H.30
BMW-
H.31
BMW-
518 75 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 368 17.95
H.32
BMW-
H.33
BMW-
H.34
BMW-
521 75 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 381 17.96
H.35
BMW-
H.36
BMW-
H.37
BMW- Horn Bend Plain 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI
524 Each 750 18.11
H.38 (Spun) fittings
BMW- Horn Bend door 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI
525 Each 875 18.08
BMW-
526 75 mm dia Heel Rest Bend - CI (Spun) fittings Each 392 18.07
H.40
BMW-
H.41
BMW-
H.42
BMW-
529 75 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 494 18.18
H.43
BMW-
530 100 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 666 18.09
H.44
BMW-
531 150 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 1,375.00 18.13
H.45
BMW-
532 75 mm dia Single Branch Door "T" - CI (Spun) fittings Each 582 18.05
H.46
BMW-
533 100 mm dia Single Branch Door "T" - CI (Spun) fittings Each 773 18.2
H.47
BMW-
534 150 mm dia Single Branch Door "T" - CI (Spun) fittings Each 1,452.00 18.14
H.48
BMW-
535 75 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 582 18.05
H.49
BMW-
536 100 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 773 18.2
H.50
BMW-
537 150 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 1,704.00 18.09
H.51
BMW-
538 75 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 638 18.15
H.52
117
Total
Buildings Embedded
(%)
BMW-
539 100 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 853 18.14
H.53
BMW-
540 150 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 1,836.00 18.15
H.54
BMW-
541 75 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 675 18.21
H.55
BMW-
542 100 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 908 18.08
H.56
BMW-
543 75 mm dia Double Branch Door "T" - CI (Spun) fittings Each 752 18.05
H.57
BMW-
544 100 mm dia Double Branch Door "T" - CI (Spun) fittings Each 947 18.08
H.58
BMW-
545 75 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 752 18.05
H.59
BMW-
546 100 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 947 18.08
H.60
BMW-
547 75 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 793 18.18
H.61
BMW-
548 100 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 1028 18.16
H.62
BMW-
549 75 mm dia Shoe Bend - CI (Spun) fittings Each 465 18.02
H.63
BMW-
550 100 mm dia Shoe Bend - CI (Spun) fittings Each 544 18
H.64
BMW-
551 150 mm dia Shoe Bend - CI (Spun) fittings Each 1105 18.18
H.65
BMW-
552 75 mm dia Collar - CI (Spun) fittings Each 318 18.22
H.66
BMW-
H.67
BMW-
H.68
BMW-
555 75 mm dia Cowl - CI (Spun) fittings Each 281 18.07
H.69
BMW-
H.70
BMW-
H.71
BMW-
558 75 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) fittings Each 407 17.97
H.72
BMW-
H.73
BMW-
H.74
BMW-
561 75 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 445 18.04
H.75
BMW-
562 100 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 582 18.05
H.76
BMW-
563 150 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 1,161.00 18.11
H.77
BMW-
564 75 mm dia Long Door Bend - CI (Spun) fittings Each 936 18.18
H.78
BMW-
565 100 mm dia Long Door Bend - CI (Spun) fittings Each 1007 18.19
H.79
BMW-
566 75 mm dia Hand Hole pipe ( Inspection pipe) Each 538 18.24
H.80
118
Total
Buildings Embedded
(%)
BMW-
H.81
BMW-
H.82
BMW-
569 75 mm dia P Traps - CI (Spun) fittings Each 582 18.05
H.83
BMW-
570 100 mm dia P Traps - CI (Spun) fittings Each 798 18.05
H.84
BMW- 4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia - CI (Spun)
571 Each 915 18.06
H.85 fittings
BMW- 4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia - CI (Spun)
572 Each 915 18.06
H.86 fittings
BMW- 4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia - CI (Spun)
573 Each 568 18.09
H.87 fittings
BMW- 6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia - CI (Spun)
574 Each 778 18.06
H.88 fittings
BMW- 3" x 2" ( 76.2 mm x 50.8 mm ) plain T 75 mm dia - CI (Spun)
575 Each 486 18.25
H.89 fittings
BMW- 3" x 2" ( 76.2 mm x 50.8 mm ) Door T 75 mm dia - CI (Spun)
576 Each 758 18.07
H.90 fittings
BMW- 3" x 2" ( 76.2 mm x 50.8 mm ) Plain Y 75 mm dia - CI (Spun)
577 Each 758 18.07
H.91 fittings
BMW- 3" x 2" ( 76.2 mm x 50.8 mm ) Door Y 75 mm dia - CI (Spun)
578 Each 758 18.07
H.92 fittings
BMW- 4" x 3" (101.6 mm x 76.2mm ) Plain T 75 mm dia - CI (Spun)
579 Each 758 18.07
H.93 fittings
BMW- 4" x 3" (101.6 mm x 76.2mm ) Door T 75 mm dia - CI (Spun)
580 Each 803 18.09
H.94 fittings
BMW- 4" x 3" (101.6 mm x 76.2mm ) Plain Y 75 mm dia - CI (Spun)
581 Each 803 18.09
H.95 fittings
BMW- 4" x 3" (101.6 mm x 76.2mm ) Door Y 75 mm dia - CI (Spun)
582 Each 857 18.04
H.96 fittings
BMW- 6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia - CI (Spun)
583 Each 1122 18.11
H.97 fittings
BMW- 6" x 4" (152.4 mm x101.6 mm ) Door T 75 mm dia - CI (Spun)
584 Each 1,216.00 18.17
H.98 fittings
BMW- 6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia - CI (Spun)
585 Each 1,286.00 18.09
H.99 fittings
BMW- 6" x 4" (152.4 mm x101.6 mm ) Door Y 75 mm dia - CI (Spun)
586 Each 1,572.00 18.11
H.100 fittings
BMW- 75 mm dia Plain " T" 27 " (685.8 mm ) Special Types of Long
587 Each 1,629.00 18.13
H.101 Fittings
BMW- 100 mm dia - Plain " T" 27 " (685.8 mm ) Special Types of Long CI
588 Each 2,288.00 18.12
BMW- 75 mm dia Door "T" 27" (685.8 mm ) Special Types of Long CI
589 Each 1,819.00 18.12
BMW- 100mm dia Door "T" 27" (685.8 mm ) Special Types of Long CI
590 Each 2,514.00 18.14
BMW- 75 mm dia Plain " Y" 27" (685.8 mm) Special Types of Long CI
591 Each 1,819.00 18.12
BMW- 100mm dia Plain " Y" 27" (685.8 mm) Special Types of Long CI
592 Each 2,514.00 18.14
BMW- 75 mm dia Door " Y" 27" (685.8 mm) Special Types of Long CI
593 Each 2,028.00 18.11
BMW- 100mm dia Door " Y" 27" (685.8 mm) Special Types of Long CI
594 Each 2,760.00 18.1
119
Total
Buildings Embedded
(%)
I MISCELLANEOUS ITEMS
BMW-
595 a) Supplying & Fixing solder joints up to 50.8 mm dia Each 61 11.81
I.01
BMW-
I.02
BMW-
597 a) Supplying & Fixing solution joints up to 50.8 dia Ist quality. Each 12 14.66
I.03
BMW-
I.04
BMW- Chiselling the stone masonry wall for fixing of wooden blocks
599 Each 28 0
I.05 including finishing as directed by the department
BMW- Chiselling the stone masonry wall and repairs as directed by the
600 1 Rm 133 0
I.06 department.
BMW- Chiselling the brick masonry wall and repairs as directed by the
601 1 Rm 28 0
I.07 department.
BMW- a) S & F NP telephonic shower spray set & valve mixer with rest
602 Each 2,167.00 14.29
I.08 and all fittings complete (ARK/ESSCO or equivalent make)
BMW-
I.09
BMW-
604 a) S & F NP shower spray fancy with NP Flexible pipe Each 576 13.38
I.10
BMW-
I.11
BMW-
606 a) S & F NP cover for Nahany trap Each 31 6.31
I.12
BMW-
I.13
BMW-
608 a) Painting the flushing tank with white enamel paint Each 105 9.57
I.14
BMW-
I.15
BMW- S & F internal fittings for flush tank Parryplast wonder flush or
610 Each 657 25.14
I.16 equivalent
BMW-
611 Repairing and over hauling flushing tank Each 87 0
I.17
BMW-
612 a) Supplying & Fixing NP chain rubber and plug for basin Each 42 14.18
I.18
BMW-
I.19
BMW- a) S & F 25.4 mm dia & 609.6 mm long aluminium anodized
614 Each 164 12.65
I.20 towel rod with brackets and aluminium screws
BMW-
I.21
BMW- a) S & F 19.04 mm dia & 609.6 mm long aluminium anodized
616 Each 142 8.82
I.22 towel rod with brackets and aluminium screws
BMW-
I.23
a) S & F 609.6 mm long 127 mm wide plate glass shelf with
BMW-
618 superior quality aluminium railing complete with aluminium Each 209 12.65
I.24
screws
BMW-
I.25
BMW-
620 a) S & F 609.6 mm long 127 mm wide plate glass shelf only Each 69 23.16
I.26
120
Total
Buildings Embedded
(%)
BMW-
I.27
BMW-
622 a) S & F NP soap dish heavy type with NP SCREWS Each 243 17.08
I.28
BMW-
I.29
BMW-
624 a) S &F NP holder brackets with screws Each 48 12.19
I.30
BMW-
I.31
BMW- a) S & F liquid soap container NP metallic with NP brackets and
626 Each 243 16.22
I.32 screws.
BMW-
I.33
BMW-
628 a) S & F 31.75 mm C.P TRAPS Each 314 15.2
I.34
BMW-
I.35
BMW-
630 a) Supplying & fixing 88.9 mm A.C cowls Each 71 0
I.36
BMW-
I.37
BMW-
632 a) Supplying & fixing A.C Cowl 63.5 mm dia Each 48 0
I.38
BMW-
I.39
BMW-
634 Removing and refixing W.C s Each 228 0
I.40
BMW- Removing and refixing wash hand basins of any size with fittings
635 Each 205 0
I.41 complete
BMW-
636 a) S & F 76.2 x 101.6 mm teak wood block complete Each 26 0
I.42
BMW-
I.43
BMW-
638 Cutting holes in C.C; basement & repairs Labour charges only Each 100 0
I.44
BMW- Cutting holes in stone masonry & basement and repairs Labour
639 Each 67 0
I.45 charges only
BMW-
640 Cutting holes in Brick masonry & repairs Labour charges only Each 44 0
I.46
BMW-
641 Cutting holes in RCC slab floor & repairs Labour charges only Each 67 0
I.47
BMW- a) Supplying & Fixing 12.7 mm PVC connection with brass union
642 Each 102 21.92
I.48 nut C.P coated
BMW-
I.49
BMW-
644 a) S & F 12.7 mm .M.P couplings Each 35 11.76
I.50
BMW-
I.51
BMW-
646 a) S & F 19.05 mm M.P couplings Each 42 12.77
I.52
BMW-
I.53
BMW-
648 a) S& F MP coupling 25.4 mm dia Each 95 15.85
I.54
121
Total
Buildings Embedded
(%)
BMW-
649 a) S & F PVC Rubber adopter for LLC and bend Each 19 14.88
I.55
BMW-
I.56
BMW-
651 a) S& F 31.75 mm Brass union nuts Each 35 13.99
I.57
BMW-
I.58
BMW-
653 a) S& F 38.1 mm Brass union nuts Each 37 13.14
I.59
BMW-
I.60
a) Constructing Brick masonry chamber over the gully trap or
BMW-
655 peet valve and fitted with 304.8 x 228.6 m size CI frame and Each 455 0
I.61
hinged cover.
BMW-
I.62
a) Constructing Brick masonry support for G.I pipe with C.M
BMW-
657 304.8 x 228.6 x228.6 mm size including plastering and finishing Each 73 0
I.63
etc. complete.
BMW-
I.64
BMW- a) Supplying & fixing 304.8 x 228.6 mm CI frame & cover over
659 Each 119 12.15
I.65 gully taps
BMW-
I.66
BMW-
661 a) Supplying & fixing CI Nahany trap grating Each 19 6.91
I.67
BMW-
I.68
BMW-
663 a) Supplying & fixing CI gully trap grating Each 48 13.41
I.69
BMW-
I.70
BMW-
665 a) Supplying & fixing valves for brass ball cocks 25.4 mm dia Each 19 8.79
I.71
BMW-
I.72
BMW-
667 a) Supplying & fixing 12.7 m valve for bib tap or stop cocks Each 18 10.35
I.73
BMW-
I.74
BMW-
669 a) Supplying & fixing 19.05 m valve for bib tap or stop cocks Each 39 12.38
I.75
BMW-
I.76
BMW-
671 Removing 12.7 mm GI pipe and refixing the same Mr. 63 0
I.77
BMW-
I.78
BMW-
I.79
BMW-
674 Removing 38.1 mm GI pipe and refixing the same Rm 132 0
I.80
BMW-
675 Removing 50.8 mm GI pipe and refixing the same Rm 154 0
I.81
122
Total
Buildings Embedded
(%)
BMW-
676 Cleaning the W.C with acid and Vim powder Each 43 0
I.82
BMW-
677 Cleaning the Urinal with acid and Vim power Each 43 0
I.83
BMW-
678 Cleaning the wash basin with acid and Vim powder Each 43 0
I.84
BMW-
679 Cleaning the E.W.C with acid and Vim power Each 43 0
I.85
BMW- Supplying & fixing 914.4 x 457.2 mm CI man hole frame and
680 Each 1,939.00 16.04
I.86 cover (light weight) 30 Kgs
BMW- Supplying & fixing 602 x 602 mm CI man hole frame and cover
681 Each 2,887.00 17.1
I.87 (light weight) 30 Kgs
BMW-
I.88
BMW-
683 a) Supplying & fixing CI steps for septic tank. Each 62 14.44
I.89
BMW-
I.90
BMW- a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover for
685 Each 1,247.00 15.77
I.91 914.4 mm dia chamber (20 Kgs - Light weight)
BMW-
I.92
BMW- a) Supplying & fixing 50.8 cm dia C.I. Man hole frame & cover for
687 Each 2,575.00 15.24
I.93 914.4 mm dia chamber (Medium weight) as per IS:1726 - 40 Kgs
BMW-
I.94
Cost. 50.8 mm thick RCM baffle wall with 2.267 Kg steel & rabbit
BMW-
689 wire mesh in CM 1:3 with fine rendering in neat cement labour 1 Sqm 251 0
I.95
charges Only
BMW-
690 a) Cost. 50.8 mm RCC partition wall 1 Sqm 273 0
I.96
BMW-
691 b) - do - labour charges only 1 Sqm 44 0
I.97
BMW-
692 a) S & F double layer of bamboo matting tarred on both sides. 10 Sqm 624 0
I.98
BMW-
693 b) - do - labour charges only 10 Sqm 123 0
I.99
BMW-
694 Removing of 101.6 m or 76.2 mm CI pipe 1 RM 36 20
I.100
BMW-
695 a) Supplying & fixing 76.2 mm W.I clamps Each 25 10.89
I.101
BMW-
I.102
BMW-
697 a) Supplying & fixing NP coat hook Each 47 13.32
I.103
BMW-
I.104
BMW- a) Supplying and fixing TV shape mirror with plastic frame size
699 Each 513 20.93
I.105 609.6 mm x 457 .2 mm
BMW-
I.106
BMW-
701 a) Supplying & fixing GI pipe plug of size 12.7 mm dia Each 10 16.02
I.107
BMW-
I.108
123
Total
Buildings Embedded
(%)
BMW-
703 a) Supplying & fixing 19.06 mm dia GI plug Each 14 16.62
I.109
BMW-
I.110
BMW-
705 a) Supplying and fixing 38.1 mm dia of GI plug Each 72 15.51
I.111
BMW-
I.112
BMW-
707 a) Supplying & fixing 50.8 mm dia of GI PLUG Each 110 16.02
I.113
BMW-
I.114
BMW-
709 a) Supplying & fixing 76.2 mm dia of GI PLUG Each 200 16.13
I.115
BMW-
I.116
BMW-
711 a) Supplying & fixing C.P flange. Each 26 11.89
I.117
BMW-
I.118
BMW- a) Supplying & fixing stainless steel sink size 36" x 18"
713 Each 6,865.00 16.57
I.119 (914.4x457.2mm) 1 mm thick with accessories
BMW-
I.120
a) Supplying & fixing SINGLE BOWL stainless steel sink size
BMW-
715 24"x18"x8 " (609.6 x 457.2 x 203.2mm) 1 mm thick with Each 5,412.00 16.21
I.121
accessories
BMW-
I.122
BMW- a) Supplying & fixing stainless steel sink size 20" x18" x 8 "
717 Each 4,905.00 16.2
I.123 (508x457.2x203.2mm) 1 mm thick with accessories
BMW-
I.124
BMW- Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed
719 Each 495 25.32
I.125 porcelain channel fixed in brick masonry white cement pointing.
BMW- Supply & Fixing of steel surgical long elbow action handle 12.7
720 Each 990 16.06
I.126 mm dia bib cock Indian make heavy type including all materials
Supply & fixing 2 1/2" (63.5mm) dia Sluice valve ISI mark with 2
BMW-
721 Nos. flanges, 8 nos, 3/4" dia nuts & bolts and all necessary Each 5,420.00 16.01
I.127
washers and packing materials etc. complete
BMW-
722 Supply & fixing porcelain P' trap Each 233 25.27
I.128
BMW- Supplying & fixing oval shape basin white (520x410mm) parry
723 Each 2,481.00 25.18
I.129 or equivalent
BMW- Supply & fixing RCC cover 22" dia with nominal reinforcement 3 "
724 Each 705 15.95
I.130 thick and hooks for lifting
BMW- st
725 Supply & fixing cp spl. Grating with frame and cover of 1 quality Each 63 16.67
I.131
BMW-
726 Supply & fixing towel rod (CP) of 24" long and 3/4 " dia Each 396 16.13
I.132
BMW-
727 Supply & fixing of LLC handle set 1st quality Each 79 16.18
I.133
BMW- Mechanical Cleaning of water sumps with pumps & UV
728 1000 Lit 55 0
I.134 disinfecting
124
Total
Buildings Embedded
(%)
BMW-
729 Supply & fixing 4" dia CP thimble pipe: 150 mm long Each 413 16.01
I.135
BMW-
I.136
BMW-
I.137
BMW-
732 Supply & fixing CP long bend Each 349 15.95
I.138
BMW-
733 Supply & fixing CP short bend Each 175 15.89
I.139
Supplying & fixing 15 mm bib tap with flange Chromeum plated
BMW-
734 Jaquar make queen series/ Jupiter Aqua Lines-JALor equivalent Each 1,721.00 16.05
I.140
series
Supply & fixing bib cock cum health faucet with 1 m long flexible
BMW- tube and wall hook of Jaquar make queen series with 7 years
735 Each 4,360.00 16.02
I.141 warranty Chrome plated / Jupiter Aqua Lines-JALor equivalent
series
Supply & fixing bib cock cum health faucet with 1 m long flexible
BMW-
736 tube and wall hook of Jaquar make queen series with 7 years Each 7,332.00 16.03
I.142
warranty: Ivory gold/ Jupiter Aqua Lines-JALor equivalent series
Supply & fixing pillar cock Jaquar make Queen series with 7 years
BMW-
737 warranty: Chrome plated / Jupiter Aqua Lines-JALor equivalent Each 1,806.00 15.99
I.143
series
BMW- Supply & fixing pillar cock Jaquar make Queen series with 7 years
738 Each 3,084.00 16.03
I.144 warranty: Ivory gold / Jupiter Aqua Lines-JALor equivalent series
Supply & fixing Angular stop cocks with wall flange Jaquar make
BMW-
739 Queen series with 7 years warranty: Chrome plated/ Jupiter Each 1,783.00 16.01
I.145
Aqua Lines-JALor equivalent series
Supply & fixing Angular stop cocks with wall flange Jaquar make
BMW-
740 Queen series with 7 years warranty: Ivory gold / Jupiter Aqua Each 3,453.00 16.03
I.146
Lines-JALor equivalent series
Supply & fixing Waste coupling Jaquar make with 7 years
BMW-
741 warranty: Chrome plated / Jupiter Aqua Lines-JALor equivalent Each 400 15.94
I.147
series
BMW- Supply & fixing of Bottle trap Jaquar make with 7 years warranty:
742 Each 1,704.00 16
I.148 Chrome plated / Jupiter Aqua Lines-JALor equivalent series
BMW- Supply & fixing of Bottle trap Jaquar make with 7 years warranty:
743 Each 2,882.00 16.02
I.149 Ivory gold / Jupiter Aqua Lines-JALor equivalent series
Supply & Fixing copper pipe 450 mm long with nuts & washers
BMW-
744 Jaquar make with 7 years warranty: Chrome plated / Jupiter Each 419 0
I.150
Supply & Fixing copper pipe 450 mm long with nuts & washers
BMW-
745 Jaquar make with 7 years warranty: Ivory gold / Jupiter Aqua Each 811 0
I.151
Supply and fixing wall mirror with provision for over head
BMW- shower and 115 mm long bend pipe with wall flange Jaquar
746 Each 5,509.00 16.03
I.152 make queen series with 7 years warranty: Chrome plated /
Jupiter Aqua Lines-JALor equivalent series
Supply and fixing wall mirror with provision for over head
BMW- shower and 115 mm long bend pipe with wall flange Jaquar
747 Each 8,666.00 16.03
I.153 make queen series with 7 years warranty: Ivory gold / Jupiter
125
Total
Buildings Embedded
(%)
Supply & fixing overhead shower rose with revolving joint and
BMW- 150 mm long swivel shower arm Jaquar make queen series. with
748 Each 2,556.00 16.02
I.154 7 years warranty: Chrome plated / Jupiter Aqua Lines-JALor
equivalent series
Supply & fixing overhead shower rose with revolving joint and
BMW- 150 mm long swivel shower arm Jaquar make queen series. with
749 Each 3,745.00 16.02
I.155 7 years warranty: Ivory Gold / Jupiter Aqua Lines-JALor
equivalent series
Supply and Fixing Wall Mixer with Telephonic shower
BMW- arrangement with crutch and flexible pipe Jaquar series Ivory
750 Each 14,600.00 16.02
I.156 gold colour for bath tub. with 7 years warranty / Jupiter Aqua
Supply & fixing Bath tub overflow set complete with over flow
BMW- cap, 450 mm Ball chain with rubber plug & union bend with brass
751 Each 1,778.00 16.06
I.157 nut Jaquar make, Ivory gold colour. with 7 years warranty /
Jupiter Aqua Lines-JALor equivalent series
Supply & fixing sink cock with regular swinging spout with wall
BMW-
752 flange chromeplated Jaquar make Queen series with 7 years Each 2,554.00 16.04
I.158
warranty / Jupiter Aqua Lines-JALor equivalent series
Supply & fixing soap dish Jaquar make queen series: with 7 years
BMW-
753 warranty: Chrome plated / Jupiter Aqua Lines-JALor equivalent Each 1,676.00 15.99
I.159
series
Supply & fixing soap dish Jaquar make queen series: with 7 years
BMW-
754 warranty: Ivory Gold / Jupiter Aqua Lines-JALor equivalent Each 2,460.00 16.04
I.160
series
Supply & fixing of toilet paper holder Jaquar make Queen series.
BMW-
755 with 7 years warranty: Chrome plated / Jupiter Aqua Lines-JALor Each 1,350.00 15.98
I.161
equivalent series
Supply & fixing of toilet paper holder Jaquar make Queen series.
BMW-
756 with 7 years warranty: Ivory Gold / Jupiter Aqua Lines-JALor Each 2,377.00 16.01
I.162
equivalent series
Supply & Fixing of Towel ring Jaquar make Queen series with 7
BMW-
757 years warranty: Chrome plated / Jupiter Aqua Lines-JALor Each 1,269.00 16
I.163
equivalent series
Supply & Fixing of Towel ring Jaquar make Queen series with 7
BMW-
758 years warranty: Ivory Gold / Jupiter Aqua Lines-JALor equivalent Each 2,073.00 16
I.164
series
Supply & Fixing of towel coat hook Jaquar make Queen series
BMW-
759 with 7 years warranty: Chrome plated / Jupiter Aqua Lines- Each 944 15.97
I.165
JALor equivalent series
Supply & Fixing of towel coat hook Jaquar make Queen series
BMW-
760 with 7 years warranty: Ivory Gold / Jupiter Aqua Lines-JALor Each 1,954.00 16.03
I.166
equivalent series
Supply & Fixing of Towel rod 24 " Jaquar make Queen series
BMW-
761 Ivory gold colour with 7 years warranty / Jupiter Aqua Lines- Each 3,240.00 16
I.167
Supply & Fixing of Tumbler holder Jaquar make Queen series,
BMW-
762 Ivory gold colour with 7 years warranty / Jupiter Aqua Lines- Each 2,271.00 16.04
I.168
Supply & fixing of Glass shelf 22" Jaquar make Queen series, Ivory
BMW-
763 gold colour with 7 years warranty / Jupiter Aqua Lines-JALor Each 4,428.00 16.01
I.169
equivalent series
Supply & Fixing of Bibcock cum Health Faucet with 1m long tube
BMW-
764 and wall hook of Jaquar Continental series, Chrome Finish with 7 Each 3,213.00 16.03
I.170
years warranty / Jupiter Aqua Lines-JALor equivalent series
126
Total
Buildings Embedded
(%)
Supply & Fixing of Bibcock Jaquar Continental series, Chrome

BMW-
765 Finish with 7 years warranty / Jupiter Aqua Lines-JALor Each 944 15.97
I.171
equivalent series
Supply & Fixing of Pillar cock Jaquar Continental series, Chrome
BMW-
766 Finish with 7 years warranty / Jupiter Aqua Lines-JALor Each 1,173.00 16.02
I.172
equivalent series
Supply & Fixing of Angular stopcock with wall flange Jaquar
BMW-
767 Continental series, Chrome finish with 7 years warranty / Jupiter Each 873 16.09
I.173
BMW- Supply fixing of Waste coupling Jaquar make, Chrome finish with
768 Each 379 15.9
I.174 7 years warranty / Jupiter Aqua Lines-JALor equivalent series
BMW- Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7
769 Each 1,704.00 16
I.175 years warranty / Jupiter Aqua Lines-JALor equivalent series
Supply & Fixing of copper pipe 450mm long with nuts & washers
BMW-
770 Jaquar make, Chrome Finish with 7 years warranty / Jupiter Each 379 15.9
I.176
Supply & Fixing of Wall Mixer with provision for overhead
BMW- shower and 115mm long bend pipe with wall flange Jaquar make
771 Each 4,126.00 16.03
I.177 Continental series, Chrome finish with 7 years warranty / Jupiter
Supply & Fixing of Exclusive overhead shower with 190mm long
BMW- light body shower arm Jaquar make Continental series, Chrome
772 Each 1,762.00 16
I.178 finish with 7 years warranty/ Jupiter Aqua Lines-JALor
equivalent series
Supply & Fixing wall mixer with telephonic shower arrangement
BMW- with crutch and telephone shower with flexible tube Jaquar make
773 Each 5,761.00 16.03
I.179 Continental series Chrome colour for bath tub with 7 years
Supply & Fixing bath tub over flow set complete with over flow
BMW- cap,450mm ball chain with rubber plug 7 Union bend with brass
774 Each 1,345.00 16.05
I.180 nuts Jaquar make, Chrome colour with 7 years warranty / Jupiter
Supply & Fixing Sink cock with regular swinging spout with
BMW-
775 flange chrome plated Jaquar make Continental series with 7 Each 1,660.00 16
I.181
years warranty / Jupiter Aqua Lines-JALor equivalent series
Supply & Fixing soap dish Jaquar make Continental series,
BMW-
776 Chrome Finish with 7 years warranty / Jupiter Aqua Lines-JALor Each 1,308.00 16.06
I.182
equivalent series
Supply & Fixing of Toilet paper holder Jaquar make Continental
BMW-
777 series, Chrome finish with 7 years warranty / Jupiter Aqua Lines- Each 873 16.09
I.183
Supply & Fixing of Towel Ring Jaquar make Continental series,
BMW-
778 Chrome finish with 7 years warranty / Jupiter Aqua Lines-JALor Each 1004 16.07
I.184
equivalent series
Supply & Fixing Double coat hook Jaquar make Continental
BMW-
779 series, Chrome finish with 7 years warranty / Jupiter Aqua Lines- Each 750 16.1
I.185
Supply & Fixing of towel rail 24'' Jaquar make Continental series,
BMW-
780 Chrome finish with 7 years warranty / Jupiter Aqua Lines-JALor Each 1,621.00 16.03
I.186
equivalent series
Supply & Fixing of Tumbler holder Jaquar make Continental
BMW-
781 series, Chrome finish with 7 years warranty / Jupiter Aqua Lines- Each 1,093.00 16.03
I.187
127
Total
Buildings Embedded
(%)
Supply & Fixing of Glass shelf 22'' Jaquar make Continental

BMW-
782 series, Chrome finish with 7 years warranty / Jupiter Aqua Lines- Each 2,149.00 16.04
I.188
Supply & Fixing of Bibcock cum Health Faucet with 1m long tube
BMW- and wall hook of Jaquar Florentine(Quarter turn) series, Chrome
783 Each 3,844.00 16.03
I.189 Finish with 7 years warranty / Jupiter Aqua Lines-JALor
equivalent series
Supply & Fixing of Bibcock Jaquar Florentine (Quarter
BMW-
784 turn)series, Chrome Finish with 7 years warranty / Jupiter Aqua Each 1,296.00 16.03
I.190
Supply & Fixing of Pillar cock Jaquar Florentine(Quarter turn)
BMW-
785 series, Chrome Finish with 7 years warranty / Jupiter Aqua Lines- Each 1,296.00 16.03
I.191
Supply & Fixing of Angular stopcock with wall flange Jaquar
BMW-
786 Florentine( Quarter turn)series, Chrome finish with 7 years Each 1,275.00 16.01
I.192
BMW- Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7
787 Each 1,704.00 16
I.193 years warranty / Jupiter Aqua Lines-JALor equivalent series
Supply & Fixing of Wall Mixer with provision for overhead
BMW- shower and 115mm long bend pipe with wall flange Jaquar make
788 Each 4,978.00 16.01
I.194 Florentine(Quarter turn) series, Chrome finish with 7 years
Supply & Fixing wall mixer with telephonic shower arrangement
BMW- with crutch and telephone shower with flexible tube Jaquar make
789 Each 7,503.00 16.02
I.195 Florentine(Quarter turn) series Chrome colour for bath tub with
7 years warranty / Jupiter Aqua Lines-JALor equivalent series
Supply & Fixing Sink cock with regular swinging spout with
BMW- flange chrome plated Jaquar make Florentine(Quarter turn)
790 Each 1,989.00 16.04
I.196 series with 7 years warranty / Jupiter Aqua Lines-JALor
equivalent series
Supply & Fixing of Rose shower with revolving ball joint &
BMW-
791 115mm long shower arm with 7 years warranty / Jupiter Aqua Each 2,113.00 16.04
I.197
Supply & Fixing of Jaquar make chrome plated Metro pole flush
BMW-
792 valve concealed type with cover plate 40mm size with 7 years Each 3,700.00 16.02
I.198
Supply & Fixing of Jaquar make Sensotronic sensor faucet for
BMW-
793 wash basin, Chrome plated with 7 years warranty / Jupiter Aqua Each 14,532.00 16.02
I.199
Supply & fixing of Jaquar make Sensotronic concealed type
BMW- flushing valve for urinal complete set with installation box with
794 Each 14,532.00 16.02
I.200 control cock, Chrome plated with 7 years warranty / Jupiter
Supply & fixing of Jaquar make Auto closing system pillar cock
BMW-
795 for wash basin, Chrome plated with 7 years warranty / Jupiter Each 2,408.00 16.05
I.201
Supply& Fixing of Jaquar make Auto Closing system Bibcock,
BMW-
796 Chrome plated with 7 years warranty / Jupiter Aqua Lines-JALor Each 2,526.00 16.03
I.202
equivalent series
128
Total
Buildings Embedded
(%)
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-PE)

composite pressure pipes conforming to IS-15450-2004 with UV
stabilized, carbon black for hot & cold water supply, capable to
BMW- withstand pressure up to 80 C including all special composite
797 1 RM 157 16.3
I.203 fittings, plastic & brass blend inserts for elbows, tees, reducers,
couplers, connectors etc complete for external works including
laying pipes, fixing in position, testing and commissioning etc :
16 mm OD pipe
798 1 RM 195 16.07
20 mm OD pipe
799 1 RM 244 16.19
25mm OD pipe
800 1 RM 328 15.9
32 mm OD pipe
801 1 RM 431 16.17
40 mm OD pipe
802 1 RM 548 16.1
laying pipes, fixing in position, testing and commissioning etc : 50
mm OD pipe
129
Total
Buildings Embedded
(%)

withstand pressure up to 80 C including all special composite
BMW-
803 fittings, plastic & brass blend inserts for elbows, tees, reducers, 1 RM 227 15.82
I.209
couplers, connectors etc complete with MS Iron clamps at 1.0 M
spacing including cutting, chasing walls, making good, laying
pipes, fixing in position, testing and commissioning etc 16 mm
OD pipe
BMW-
I.210
OD pipe
BMW-
I.211
pipes, fixing in position, testing and commissioning etc 25mm
OD pipe
BMW-
I.212
OD pipe
BMW-
I.213
OD pipe
BMW-
I.214
OD pipe
130
Total
Buildings Embedded
(%)
S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE)

809 1 RM 185 16.35
couplers, connectors etc complete including excavating trenches
up to 1.0 M deep laying pipes, fixing in position, testing, refilling
excavated earth and commissioning etc 16 mm OD pipe
810 1 RM 220 15.79

811 1 RM 267 16.09
excavated earth and commissioning etc 25mm OD pipe

812 1 RM 345 16.16

813 1 RM 442 16.01
Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or
equivalent CPVC Pipes and Fittings to meet the requirement of
ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"
#DIV/0!
ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made
from idential CPVC compounds having the same physical
Properties for Hot and Cold Water (IS 15778:2007)
BMW-
814 15.90mm OD Pipe - SDR 13.5 1 RM 141 15.57
I.220
BMW-
815 22.20mm OD Pipe - SDR 13.5 1 RM 160 15.94
I.221
131
Total
Buildings Embedded
(%)
BMW-
816 28.60mm OD Pipe - SDR 13.5 1 RM 212 15.85
I.222
BMW-
817 34.90mm OD Pipe - SDR 13.5 1 RM 289 16.06
I.223
BMW-
818 41.30mm OD Pipe - SDR 13.5 1 RM 360 16.13
I.224
BMW-
819 54.00mm OD Pipe - SDR 13.5 1 RM 525 15.89
I.225
BMW-
820 15.90mm OD Pipe - SDR 11 1 RM 156 16.42
I.226
BMW-
821 22.20mm OD Pipe - SDR 11 1 RM 189 15.95
I.227
BMW-
822 28.60mm OD Pipe - SDR 11 1 RM 227 15.82
I.228
BMW-
823 34.90mm OD Pipe - SDR 11 1 RM 310 16.1
I.229
BMW-
824 41.30mm OD Pipe - SDR 11 1 RM 383 16.06
I.230
BMW-
825 54.00mm OD Pipe - SDR 11 1 RM 560 15.94
I.231
BMW- Supply of 20mm x 1.9mm PN 10/PPR pipe conforming to DIN
826 1 RM 48 17.07
I.232 Standards 8077/8078
827 1 RM 73 17.74
828 1 RM 115 18.56
829 1 RM 180 18.42
830 1 RM 321 18.01
831 1 RM 504 18.03
832 1 RM 702 18.18
833 1 RM 963 18.16
BMW- Supply of 110mm x 10mm PN 10/PPR pipe conforming to DIN
834 1 RM 1,427.00 18.13
835 1 RM 66 17.86
836 1 RM 102 18.6
837 1 RM 163 18.12
838 1 RM 251 18.4
839 1 RM 449 18.16
840 1 RM 707 18.03
841 1 RM 999 18.09
842 1 RM 1,425.00 18.16
843 1 RM 2,134.00 18.1
132
Total
Buildings Embedded
(%)

844 1 RM 77 18.46
845 1 RM 118 18
846 1 RM 190 18.01
847 1 RM 292 18.22
848 1 RM 519 18.22
849 1 RM 819 18.18
850 1 RM 1,162.00 18.09
BMW- Supply of 90mm x 15mm PN 20/PPR pipe conforming to DIN
851 1 RM 1,579.00 18.1
852 1 RM 2,487.00 18.15
BMW- Supply of 20mm PPR Socket conforming to DIN Standards
853 1 RM 11 22.22
I.259 8077/8084
854 1 RM 15 15.38
I.260 8077/8085
855 1 RM 21 16.67
I.261 8077/8086
856 1 RM 36 20
I.262 8077/8087
857 1 RM 70 18.64
I.263 8077/8088
858 1 RM 134 18.58
I.264 8077/8089
859 1 RM 204 17.92
I.265 8077/8090
860 1 RM 391 18.13
I.266 8077/8091
861 1 RM 696 18.17
I.267 8077/8092
BMW- Supply of 32mm PPR Core Flange conforming to DIN Standards
862 Each 42 16.67
I.268 8077/8086
863 Each 67 17.54
I.269 8077/8087
864 Each 87 17.57
I.270 8077/8088
865 Each 138 17.95
I.271 8077/8089
866 Each 161 18.38
I.272 8077/8090
867 Each 411 18.1
I.273 8077/8091
868 Each 531 18
I.274 8077/8092
BMW- Supply of 20mm PPR Elbow conforming to DIN Standards
869 Each 18 20
I.275 8077/8084
870 Each 22 15.79
I.276 8077/8085
871 Each 43 19.44
I.277 8077/8086
133
Total
Buildings Embedded
(%)

872 Each 75 19.05
I.278 8077/8087
873 Each 140 17.65
I.279 8077/8088
874 Each 274 18.1
I.280 8077/8089
875 Each 443 18.13
I.281 8077/8090
876 Each 824 18.05
I.282 8077/8091
877 Each 1,530.00 18.15
I.283 8077/8092
BMW- Supply of 20mm PPR Tee conforming to DIN Standards
878 Each 16 14.29
I.284 8077/8084
879 Each 28 16.67
I.285 8077/8085
880 Each 51 18.6
I.286 8077/8086
881 Each 90 18.42
I.287 8077/8087
882 Each 160 18.52
I.288 8077/8088
883 Each 325 18.18
I.289 8077/8089
884 Each 636 18.22
I.290 8077/8090
885 Each 922 18.05
I.291 8077/8091
886 Each 1,598.00 18.11
I.292 8077/8092
BMW- Supply of 20mm PPR End Cap conforming to DIN Standards
887 Each 7 16.67
I.293 8077/8084
888 Each 11 22.22
I.294 8077/8085
889 Each 21 16.67
I.295 8077/8086
890 Each 36 20
I.296 8077/8087
891 Each 63 18.87
I.297 8077/8088
892 Each 134 18.58
I.298 8077/8089
893 Each 225 18.42
I.299 8077/8090
894 Each 358 18.15
I.300 8077/8091
895 Each 708 18.2
I.301 8077/8092
BMW- Supply of 25mm x 20mm PPR Reducer conforming to DIN
896 Each 13 18.18
897 Each 22 15.79
898 Each 21 16.67
899 Each 37 19.35
134
Total
Buildings Embedded
(%)

900 Each 36 20
901 Each 35 16.67
902 Each 54 17.39
903 Each 55 17.02
904 Each 56 19.15
905 Each 57 18.75
906 Each 124 18.1
907 Each 124 18.1
908 Each 125 17.92
909 Each 126 17.76
910 Each 127 17.59
911 Each 184 17.95
912 Each 185 17.83
913 Each 235 18.09
914 Each 449 18.16
915 Each 476 18.11
916 Each 600 18.11
917 Each 698 18.1
918 Each 753 18.21
BMW- Supply of 25mm x 20mm x 25mm PPR Reducer Tee conforming
919 Each 35 16.67
I.325 to DIN Standards 8077/8092
920 Each 61 17.31
921 Each 62 19.23
922 Each 101 17.44
923 Each 103 18.39
924 Each 105 17.98
925 Each 146 17.74
926 Each 148 18.4
927 Each 152 17.83
135
Total
Buildings Embedded
(%)

928 Each 153 17.69
929 Each 423 18.16
930 Each 425 18.06
931 Each 431 18.08
932 Each 438 18.06
933 Each 445 18.04
934 Each 598 18.18
935 Each 607 18.09
936 Each 805 18.21
937 Each 855 18.09
BMW- Supply of 110mm x 75mm x 110mm PPR Reducer Tee
938 Each 1,459.00 18.14
I.344 conforming to DIN Standards 8077/8092
BMW- Supply of 110mm x 90mm x 110mm PPR Reducer Tee
939 Each 1,517.00 18.15
BMW- Supply of 20mm x ½” PPR Female Threaded Adaptor conforming
940 Each 112 17.89
941 Each 115 18.56
BMW- Supply of 25mm x ¾” PPR Female Threaded Adaptor conforming
942 Each 201 18.24
943 Each 205 17.82
BMW- Supply of 32mm x ¾” PPR Female Threaded Adaptor conforming
944 Each 212 18.44
BMW- Supply of 32mm x 1" PPR Female Threaded Adaptor conforming
945 Each 327 18.05
BMW- Supply of 40mm x 1¼” PPR Female Threaded Adaptor
946 Each 484 18.05
BMW- Supply of 50mm x 1½” PPR Female Threaded Adaptor
947 Each 676 18.18
BMW- Supply of 63mm x 2" PPR Female Threaded Adaptor conforming
948 Each 899 18.13
BMW- Supply of 75mm x 2½”PPR Female Threaded Adaptor
949 Each 1,733.00 18.13
BMW- Supply of 20mm x ½” PPR Male Threaded Adaptor conforming to
950 Each 174 18.37
I.356 DIN Standards 8077/8092
BMW- Supply of 25mm x ½” PPR Male Threaded Adaptor conforming to
951 Each 180 18.42
BMW- Supply of 25mm x ¾” PPR Male Threaded Adaptor conforming to
952 Each 262 18.02
BMW- Supply of 32mm x ¾” PPR Male Threaded Adaptor conforming to
953 Each 274 18.1
BMW- Supply of 32mm x 1" PPR Male Threaded Adaptor conforming to
954 Each 509 18.1
BMW- Supply of 40mm x 1¼” PPR Male Threaded Adaptor conforming
955 Each 597 18.22
136
Total
Buildings Embedded
(%)
BMW- Supply of 50mm x 1½” PPR Male Threaded Adaptor conforming

956 Each 834 18.13
BMW- Supply of 63mm x 2" PPR Male Threaded Adaptor conforming to
957 Each 1,283.00 18.14
BMW- Supply of 75mm x 2½”PPR Male Threaded Adaptor conforming
958 Each 2,052.00 18.13
BMW- Supply of 20mm x ½” PPR Female Threaded Elbow conforming
959 Each 120 17.65
960 Each 125 17.92
BMW- Supply of 25mm x ¾” PPR Female Threaded Elbow conforming
961 Each 193 18.4
962 Each 185 17.83
BMW- Supply of 32mm x ¾” PPR Female Threaded Elbow conforming
963 Each 216 18.03
BMW- Supply of 32mm x 1" PPR Female Threaded Elbow conforming to
964 Each 362 18.3
BMW- Supply of 20mm x ½” PPR Male Threaded Elbow conforming to
965 Each 180 18.42
966 Each 197 17.96
BMW- Supply of 25mm x ¾” PPR Male Threaded Elbow conforming to
967 Each 261 18.1
968 Each 251 18.4
BMW- Supply of 32mm x1" PPR Male Threaded Elbow conforming to
969 Each 541 18.12
BMW- Supply of 20mm x ½” PPR Female Threaded Tee conforming to
970 Each 116 18.37
971 Each 127 17.59
BMW- Supply of 25mm x ¾” PPR Female Threaded Tee conforming to
972 Each 212 18.44
973 Each 223 17.99
BMW- Supply of 32mm x ¾” PPR Female Threaded Tee conforming to
974 Each 251 18.4
BMW- Supply of 32mm x 1" PPR Female Threaded Tee conforming to
975 Each 352 18.12
BMW- Supply of 20mm x ½” PPR Male Threaded Teeconforming to DIN
976 Each 181 18.3
BMW- Supply of 25mm x ½” PPR Male Threaded Tee conforming to DIN
977 Each 193 18.4
BMW- Supply of 25mm x ¾” PPR Male Threaded Tee conforming to DIN
978 Each 277 18.38
BMW- Supply of 32mm x ½” PPR Male Threaded Tee conforming to DIN
979 Each 283 17.92
BMW- Supply of 32mm x ¾” PPR Male Threaded Tee conforming to
980 Each 299 18.18
BMW- Supply of 32mm x 1" PPR Male Threaded Tee conforming to DIN
981 Each 552 18.2
BMW- Supply of 20mm x ½” PPR Female Threaded Union conforming to
982 Each 466 18.27
BMW- Supply of 25mm x ¾” PPR Female Threaded Union conforming
983 Each 698 18.1
137
Total
Buildings Embedded
(%)
BMW-Supply of 32mm x 1” PPR Female Threaded Union conforming

984 Each 932 18.12
I.390
to DIN Standards 8077/8092
BMW-Supply of 40mm x 1¼” PPR Female Threaded Union conforming
985 Each 1,306.00 18.08
I.391
BMW-Supply of 50mm x 1½” PPR Female Threaded Union conforming
986 Each 2,099.00 18.12
I.392
BMW-Supply of 63mm x 2” PPR Female Threaded Union conforming to
987 Each 3,334.00 18.14
I.393
DIN Standards 8077/8092
BMW-Supply of 20mm x ½” PPR Male Threaded Union conforming to
988 Each 534 18.14
I.394
BMW-Supply of 25mm x ¾” PPR Male Threaded Union conforming to
989 Each 710 18.14
I.395
BMW-Supply of 32mm x 1” PPR Male Threaded Union conforming to
990 Each 932 18.12
I.396
BMW-Supply of 40mm x 1¼” PPR Male Threaded Union conforming to
991 Each 1,165.00 18.15
I.397
BMW-Supply of 50mm x 1½” PPR Male Threaded Union conforming to
992 Each 2,215.00 18.13
I.398
BMW-Supply of 63mm x 2” PPR Male Threaded Union conforming to
993 Each 3,732.00 18.14
I.399
BMW-Supply of 20mm PPR Union conforming to DIN Standards
994 Each 102 18.6
I.400
8077/8092
995 Each 119 17.82
I.401
8077/8092
996 Each 196 18.07
I.402
8077/8092
BMW-Supply of 20mm PPR Ball Valve conforming to DIN Standards
997 Each 186 18.47
I.403
8077/8092
998 Each 245 18.36
I.404
8077/8092
999 Each 257 17.89
I.405
8077/8092
1000 Each 526 18.2
I.406
8077/8092
1001 Each 613 18.11
I.407
8077/8092
1002 Each 992 18.1
I.408
8077/8092
1003 Each 1,633.00 18.16
I.409
8077/8092
1004 Each 2,333.00 18.13
I.410
8077/8092
BMW-Supply of 20mm PPR Clamp conforming to DIN Standards
1005 Each 11 22.22
I.411
8077/8092
1006 Each 14 16.67
I.412
8077/8092
1007 Each 16 14.29
I.413
8077/8092
1008 Each 18 20
I.414
8077/8092
Labour charges for laying, joining, welding, fixing and
commissioning the PPR pipes including all specials such as
BMW-
1009 couplers/ bends/ tees etc including fixing necessary fittings like 1 RM 29 0
I.415
bends, plugs, couplers, junctions, tees, etc with welding the joint
as per standard practice - up to 40 mm dia
138
Total
Buildings Embedded
(%)
Labour charges for laying, joining, welding, fixing and

commissioning the PPR pipes including all specials such as
BMW-
1010 couplers/ bends/ tees etc including fixing necessary fittings like 1 RM 49 0
I.416
bends, plugs, couplers, junctions, tees, etc with welding the joint
as per standard practice - above 40 mm dia
139

SoR 2014-15 - Without Calculation

Uploaded by

Copyright:

Available Formats

SoR 2014-15 - Without Calculation

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SoR 2014-15 - Without Calculation

Uploaded by

Copyright:

Available Formats

Total

A BRICKS & BUILDING BLOCKS

Fly ash cement/ lime solid blocks with compressive strength of

Providing of Vitrified/ Ceramic Tile flooring for required

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing tile flooring with synthetic/ epoxy adhesive in

Providing Glass Mosaic tiles using specified pattern fixing with

Supply, laying & fixing of 30 mm thick cement Mosaic reflective

Supply of high strength Cement Concrete interlocking Regular

BMT- Expanded metal sheets as per IS-412-1962- Medium Weight-20

BMT- Expanded metal sheets as per IS-412-1962- Medium Weight-20

BMT- Expanded metal sheets as per IS-412-1962- Heavy Weight-20

Powder Coated Mild Steel Hallow single rebate door frames

BMT- Supply of cement based Impervious Water Proofing powder

Construction Chemicals, Epoxy & Admixtures - Chloride free

Air Entraining Agent: Roofplast AEA/ Conflow SNE or Zoriplast

Sprayed Concrete Accelerator: Shotset SN1 or Roofplast SA/

Zincrich epoxy resin primer - Roofguard ZP/Procoat SNZ or

Acrylic based Bonding Adhesives: Conbond SNA or Roofbond PB/

BMT- Polyurethane Sealant - Roof seal PS/ Zoriseal PS/HI-CRM EXW

Supply and application of Elastomeric flexible two component

Supply and application of grey cementitious powder polymer

BMT- Altek / PMCC or Equivalent top coat high UV resistant

BMT- BISON DESIGNER BOARD Available Designs 1. Lumber 2. Quadra

Perforated wall panels ARMSTRONG channelled wood works

Supply , manufacturing , installing of library Rack of 19 mm thick

Supply and fixing of wall lining fixing to GI channels of perimeter

Supply and fixing of wall lining fixing to GI channels of perimeter

Supply and fixing of E-board wall panelling (water, fire and

Providing and fixing of 75mm thick EVEREST SOLID WALL

Supply and fixing of BISONLAM double skin partition using with

Providing and fixing “RAJSHRI” or equivalent INSULATED PVC

BMT- Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm

Supply and fixing of wall panelling on the framework of wooded

Fixed Partition: Outer frame section size of 46x52mm, mullion

Supply & fixing of 50 mm thick sandwiched panel of two fibre-

Supply & fixing of 75 mm thick sandwiched panel of two fibre-

Supply of sandwiched panel of two fibre-reinforced cement

Supply of sandwiched panel of two fibre-reinforced cement

Supply and installation of V-PLANKS(IS 14862) of size 150 x

Supply& fixing of 75 mm thick V-PANEL comprise of two 5mm

Providing and fixing 30mm thick “RAJSHRI” or equivalent

SUPPLY & FIXING or RAJSHRI or equivalent SINGLE SIDE

Providing and fixing 30mm thick “RAJSHRI” or equivalent

Supply and fixing BISONPANEL (IS 14276) single door shutter

Doors Frames (Colour Coated Steel Sections) & Shutter using

Providing and fixing frame made from 1.2 mm powder coated

Supply and fixing of Sintex Frontura door shutter consisting of

Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof