Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Toshiba VTD1432

    Uploaded by

    thomas-stentzel
    The document provides service and safety information for a DVD player, including: - Warnings about the laser inside and not looking into openings. - Instructions for proper servicing including using designated parts and checking safety after servicing. - Details on replacing the DVD deck, removing discs without power, changing parental control settings, and unlocking the tray. - Notes on handling electrostatic discharge and using lead-free solder for repairs. - A table of contents for the full service manual.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Toshiba VTD1432

    Uploaded by

    thomas-stentzel
    27 views66 pages
    The document provides service and safety information for a DVD player, including: - Warnings about the laser inside and not looking into openings. - Instructions for proper servicing including using designated parts and checking safety after servicing. - Details on replacing the DVD deck, removing discs without power, changing parental control settings, and unlocking the tray. - Notes on handling electrostatic discharge and using lead-free solder for repairs. - A table of contents for the full service manual.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides service and safety information for a DVD player, including: - Warnings about the laser inside and not looking into openings. - Instructions for proper servicing including using designated parts and checking safety after servicing. - Details on replacing the DVD deck, removing discs without power, changing parental control settings, and unlocking the tray. - Notes on handling electrostatic discharge and using lead-free solder for repairs. - A table of contents for the full service manual.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views66 pages

    Toshiba VTD1432

    Uploaded by

    thomas-stentzel
    The document provides service and safety information for a DVD player, including: - Warnings about the laser inside and not looking into openings. - Instructions for proper servicing including using designated parts and checking safety after servicing. - Details on replacing the DVD deck, removing discs without power, changing parental control settings, and unlocking the tray. - Notes on handling electrostatic discharge and using lead-free solder for repairs. - A table of contents for the full service manual.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 66

    DRAFT SERVICE MANUAL

    COLOUR TELEVISION/
    DVD VIDEO PLAYER

    VTD1432
    IMPORTANT WARNING
    CAUTION:
    DVD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS PLAYER USES A VISIBLE LASER
    BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO
    OPERATE THE PLAYER CORRECTLY AS INSTRUCTED.

    THE FOLLOWING CAUTION LABEL IS LOCATED ON THE REAR PANEL OF THE PLAYER.

    CLASS 1
    LASER PRODUCT

    (Printed on the Rear Panel)

    WHEN THIS PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE
    TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF
    THIS PLAYER.

    USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN


    THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

    DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED
    PERSONNEL.

    SERVICING NOTICES ON CHECKING


    1. KEEP THE NOTICES 3. PUT PARTS AND WIRES IN THE
    As for the places which need special attentions, ORIGINAL POSITION AFTER
    they are indicated with the labels or seals on the ASSEMBLING OR WIRING
    cabinet, chassis and parts. Make sure to keep the There are parts which use the insulation
    indications and notices in the operation manual. material such as a tube or tape for safety, or
    which are assembled in the condition that
    2. USE THE DESIGNATED PARTS these do not contact with the printed board.
    The parts in this equipment have the specific The inside wiring is designed not to get closer
    characters of incombustibility and withstand to the pyrogenic parts and high voltage parts.
    voltage for safety. Therefore, the part which is Therefore, put these parts in the original
    replaced should be used the part which has positions.
    the same character.
    Especially as to the important parts for safety
    4. PERFORM A SAFETY CHECK AFTER
    which is indicated in the circuit diagram or the SERVICING
    table of parts as a mark, the designated Confirm that the screws, parts and wiring which
    parts must be used. were removed in order to service are put in the
    original positions, or whether there are the
    portions which are deteriorated around the
    serviced places serviced or not. Check the
    insulation between the antenna terminal or
    external metal and the AC cord plug blades.
    And be sure the safety of that.

    HOW TO ORDER PARTS


    Please include the following informations when you order parts. (Particularly the VERSION LETTER.)
    1. MODEL NUMBER and VERSION LETTER
    The MODEL NUMBER can be found on the back of each product and the VERSION LETTER can be
    found at the end of the SERIAL NUMBER.
    2. PART NO. and DESCRIPTION
    You can find it in your SERVICE MANUAL.

    A1-1
    WHEN REPLACING DVD DECK
    [ When the removal of the DVD Deck ]
    Before removing Pick Up PCB and DVD PCB connector, make the short circuit on the position as
    shown Fig. 1 using a soldering. If you remove the DVD Deck with no soldering, the Laser may be
    damaged.

    [ When the installation of the DVD Deck ]


    Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD
    PCB connector.

    NOTE
    • Use the Pb Free solder and the exclusive soldering iron.
    • Manual soldering conditions
    • Soldering temperature: 350 ± 10˚C
    • Soldering time: Within 3 seconds
    • Soldering combination: Sn-3.0Ag-0.5Cu
    • When Soldering/Removing of solder, use the draw in equipment over the Pick Up Unit to prevent the
    Flux smoke from it.
    Pick Up PCB

    Make the short circuit


    Fig. 1 using a soldering.

    DISC REMOVAL METHOD AT NO POWER SUPPLY


    1. Remove the Back Cabinet and TV//DVD/VCR Block. (Refer to item 1 of the DISASSEMBLY
    INSTRUCTIONS.)
    2. Rotate the Main Gear in the direction of the arrow by hand.
    (Refer to Fig. 1)
    3. Draw the Tray.
    Main Gear Deck CD

    Fig. 1

    A1-2
    PARENTAL CONTROL - RATING LEVEL
    4 DIGIT PASSWORD CANCELLATION
    If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps
    below.

    1. Turn Unit ON.


    2. Set the DVD to the Stop Mode.
    3. Check that the 'No disk' is displayed on the screen.
    4. Press and hold the 'STOP' button on the front panel.
    5. Simultaneously press and hold the '7' key on the remote control unit.
    6. Hold both keys for more than 3 seconds.
    7. The On Screen Display message 'PASSWORD CLEAR' will appear.
    8. The 4 digit password has now been cleared.

    TRAY LOCK
    Tray cannot be opened by setting the Tray Lock, please follow the steps below.
    1. Turn Unit ON.
    2. Set the DVD to the Stop Mode.
    3. Press it in order of 'SETUP', 'SUBTITLE', '3', 'AUDIO' and '0' key of a remote control unit.
    4. The On Screen Display message ' ' will appear.
    5. The Tray Lock has now been set up.

    To unlock the Tray Lock, please follow the steps below.


    1. Turn Unit ON.
    2. Set the DVD to the Stop Mode.
    3. Press it in order of 'SETUP', 'SUBTITLE', '3', 'AUDIO' and '0' key of a remote control unit.
    4. The On Screen Display message ' ' will appear.
    5. The Tray Lock has now been cleared.

    PREPARATION OF SERVICING
    The laser diode used for a pickup head may be destroyed with external static electricity.
    Moreover, even if it is operating normally after repair, when static electricity discharge is received at the
    time of repair, a life of product may become short.
    Please perform the following measure against static electricity, be careful of destruction of a laser diode
    enough at the time of repair, and work.

    • It works on the desk which performed measures against static electricity, such as conductive mat.
    • Soldering iron with ground wire or ceramic type is used.
    • A worker needs to use a ground conductive wrist strap for body.

    A1-3
    ABOUT LEAD FREE SOLDER (PbF)
    Distinction of PbF PCB:
    PCBs (manufactured) using lead free solder will have a PbF printing on the PCB.
    (Please refer to figures.)

    Caution:
    • Pb free solder has a higher melting point than standard solder;
    Typically the melting point is 50°F~70°F(30°C~40°C) higher.
    Please use a soldering iron with temperature control and adjust it to 650°F ± 20°F (350°C ± 10°C).
    In case of using high temperature soldering iron, please be carefull not to heat too long.
    • Pb free solder will tend to splash when heated too high (about 1100°F/ 600°C).
    • All products with the printed circuit board with PbF printing must be serviced with lead free solder.
    When soldering or unsoldering, completely remove all of the solder from the pins or solder area,
    and be sure to heat the soldering points with the lead free solder until it melts sufficiently.

    Recommendations
    Recommended lead free solder composition is Sn-3.0Ag-0.5Cu.

    A1-4
    TABLE OF CONTENTS

    IMPORTANT WARNING ............................................................................................. A1-1


    SERVICING NOTICES ON CHECKING ...................................................................... A1-1
    HOW TO ORDER PARTS ........................................................................................... A1-1
    WHEN REPLACING DVD DECK ................................................................................ A1-2
    DISC REMOVAL METHOD AT NO POWER SUPPLY ............................................... A1-2
    PARENTAL CONTROL - RATING LEVEL ................................................................. A1-3
    TRAY LOCK ................................................................................................................ A1-3
    PREPARATION OF SERVICING ................................................................................ A1-3
    ABOUT LEAD FREE SOLDER (PbF) ......................................................................... A1-4
    TABLE OF CONTENTS .............................................................................................. A2-1
    GENERAL SPECIFICATIONS .................................................................................... A3-1~A3-6
    DISASSEMBLY INSTRUCTIONS
    1.REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS ................................ B1-1, B1-2
    2.REMOVAL OF DVD DECK PARTS ...................................................................... B2-1~B2-4
    3.REMOVAL OF ANODE CAP ................................................................................ B3-1
    4.REMOVAL AND INSTALLATION OF FLAT PACKAGE IC .................................. B4-1, B4-2
    SERVICE MODE LIST ................................................................................................. C-1
    CONFIRMATION OF HOURS USED .......................................................................... C-1
    WHEN REPLACING EEPROM (MEMORY) IC ........................................................... C-2
    ELECTRICAL ADJUSTMENTS .................................................................................. D-1~D-6
    BLOCK DIAGRAMS
    DVD .......................................................................................................................... E-1, E-2
    TV ............................................................................................................................. E-3, E-4
    POWER .................................................................................................................... E-5, E-6
    PRINTED CIRCUIT BOARDS
    DVD .......................................................................................................................... F-1, F-2
    AV/CRT .................................................................................................................... F-3~F-6
    LOADING MOTOR//RELAY/LD/SW ........................................................................ F-7, F-8
    SCHEMATIC DIAGRAMS
    MPEG/MICON/DSP ................................................................................................. G-1, G-2
    MEMORY ................................................................................................................. G-3, G-4
    RF AMP .................................................................................................................... G-5, G-6
    AUDIO/VIDEO .......................................................................................................... G-7, G-8
    REGULATOR ........................................................................................................... G-9, G-10
    MICON/TUNER ........................................................................................................ G-11, G-12
    CHROMA/SIF/VIF/21PIN ......................................................................................... G-13, G-14
    SOUND AMP ........................................................................................................... G-15, G-16
    IN/OUT ..................................................................................................................... G-17, G-18
    AUDIO SW ............................................................................................................... G-19, G-20
    DEFLECTION .......................................................................................................... G-21, G-22
    CRT .......................................................................................................................... G-23, G-24
    POWER .................................................................................................................... G-25, G-26
    LOADING MOTOR/SW ............................................................................................ G-27, G-28
    INTERCONNECTION DIAGRAM ................................................................................ G-29, G-30
    WAVEFORMS ............................................................................................................. H-1~H-3
    MECHANICAL EXPLODED VIEWS ........................................................................... I1-1~I1-3
    DVD DECK EXPLODED VIEWS ................................................................................. I2-1
    MECHANICAL REPLACEMENT PARTS LIST .......................................................... J1-1
    DVD DECK REPLACEMENT PARTS LIST ................................................................ J2-1
    ELECTRICAL REPLACEMENT PARTS LIST ............................................................ J3-1~J3-5

    A2-1
    GENERAL SPECIFICATIONS
    G-1 TV CRT CRT Size / Visual Size 14 inch / 335.4mmV
    System CRT Type Normal
    Magnetic Field BV/BH +0.45G / +0.18G
    Color System PAL
    Speaker 2 Speaker
    Position Front
    Size 1.5 x 2.7 Inch
    Impedance 8 ohm
    Sound Output MAX 1.5W + 1.5W
    10%(Typical) __
    NTSC4.43(AV) Yes
    PAL60Hz Yes
    G-2 DVD System Color System PAL
    Disc DVD, CD-DA, CD-R/RW, Video CD, SVCD
    DVD-R/RW (Video Format Only)
    Disc Diameter 120 mm , 80 mm
    Drive DM3O
    Search speed Fwd 4 step
    Actual 2-120 times(DVD)
    4-40 times (CD)
    Rev 4 step
    Actual 2-120 times(DVD)
    4-40 times (CD)
    Slow speed Fwd 1/7 -1/2 times
    Actual --
    Rev 1/7 -1/2 times
    Actual --
    G-3 Tuning Broadcasting System U.K. System I
    System Tuner and System 1Tuner
    Receive CH Destination U.K.
    CH Coverage 21~69
    Intermediate Picture(FP) 39.5MHz
    Frequency Sound(FS) 33.5MHz
    FP-FS 6.0MHZ
    Auto Tuning Method --
    Preset CH 80CH
    Stereo/Dual TV Sound No
    Tuner Sound Muting Yes
    G-4 Signal Video Signal Input Level 1 V p-p/75 ohm
    Output Level 1 V p-p/75 ohm
    S/N Ratio (Weighted) at DVD Mode 65dB
    Horizontal Resolution at DVD Mode 400 Lines
    RGB Signal Output Level -
    Audio Signal Input Level -3.8dBm/50k ohm
    TV Output Level (0dB=0.775Vrms) -3.8dBm/1k ohm
    DVD Output Level (-20dBFs 0dBFs=2.0Vrms) -12.0dBm/1k ohm
    Digital Output Level 0.5 V p-p/75 ohm(DVD)
    S/N Ratio at DVD (Weighted) 90 dB
    Harmonic Distortion at DVD Mode 0.06% (1kHz)
    Frequency Response :
    DVD Mode at DVD 4Hz - 22kHz
    at VIDEO CD 4Hz - 20kHz
    at SVCD 4Hz - 20kHz
    at CD 4Hz - 20kHz
    G-5 Power Power Source AC 230V~240V 50Hz
    DC -
    Power Consumption at AC 55 W at 230 V 50 Hz
    at DC -
    Stand by (at AC) 8 W at 230 V 50 Hz
    Per Year -
    Protector Power Fuse Yes
    Safety Circuit Yes
    IC Protector(Micro Fuse) No
    G-6 Regulation Safety CE,BEAB
    Radiation CE
    X-Radiation NONE
    G-7 Temperature Operation +5oC ~ +40oC
    Storage -20oC ~ +60oC
    G-8 Operating Humidity Less than 80% RH

    A3-1
    GENERAL SPECIFICATIONS
    G-9 On Screen Menu Yes
    Display Menu Type Character
    CHANNEL SETUP Yes
    Manual Yes
    Auto Yes
    CH Allocation Yes
    Picture Yes
    Contrast Yes
    Brightness Yes
    Color Yes
    Tint (NTSC Only) Yes
    Sharpness Yes
    Audio No
    Bass No
    Treble No
    Balance No
    AV Color System Yes
    Language No
    Clock Set No
    On Timer Set No
    Off Timer Set No
    Sound System No
    Control Level Yes
    Brightness Yes
    Contrast Yes
    Color Yes
    Sharpness Yes
    Tint (NTSC Only) Yes
    Volume Yes
    Tuning Yes
    Bass No
    Treble No
    Balance No
    NICAM ST No
    G(A2)Stereo No
    CH/AV/DVD Yes
    Skip Yes
    Channel Yes
    Sleep Timer No
    Sound Mute Yes

    A3-2
    GENERAL SPECIFICATIONS
    G-10 On Screen Menu (DVD) Yes
    Display Menu Type Character
    Language Yes
    Menu Yes
    Subtitle Yes
    Audio Yes
    Picture Yes
    TV Screen Size(4:3/16:9) Yes
    OSD Display On/Off Yes
    JPEG Interval Yes
    Select Files Yes
    Sound Yes
    DRC (Dynamic Range Control) Yes
    dts Decode No
    Output(5.1ch/ 2ch) No
    Surround On/Off No
    Center On/Off No
    Sub Woofer On/Off No
    Parental Yes
    Password Lock/ Un Lock Yes
    Rating Level Yes
    Other No
    OSD Language(Set up Language) No
    Output(RGB/Composite) No
    Open Yes
    Close Yes
    No disc Yes
    Reading Yes
    Play Yes
    Still/Pause Yes
    Stop Yes
    Prohibit Mark Yes
    Step Yes
    Skip(>>|) Yes
    Skip(|<<) Yes
    Random Yes (CD, VIDEO CD, MP3, WMA, JPEG )
    Repeat Yes
    Slow+ Yes
    Slow- Yes
    Search+ Yes
    Search- Yes
    Jump Yes
    Resume Yes
    Title No. Yes
    Chapter No. Yes
    Track No. Yes
    Time Yes
    Sub Title No. Yes
    Angle No. Yes
    Vocal On/Off Yes
    Audio No. Yes
    Audio Stereo L/R Yes (Video CD)
    Zoom Yes
    Marker No. Yes
    Program Play Back Yes (CD, VIDEO CD, MP3, WMA, JPEG )
    Surround On/Off No
    Screen Saver No
    MP3, WMA, JPEG Folder Name Yes
    File Name Yes
    File No Yes
    Time Yes (MP3, WMA Only)
    Track No Yes
    G-11 OSD Language (TV) English
    (DVD) English
    G-12 Clock and Sleep Timer Max Time - Min
    Timer Step - Min
    On/Off Timer Program(On Timer / Off Timer) No
    Wake Up Timer No
    Timer Back-up (at Power Off Mode) more than -- Min Sec

    A3-3
    GENERAL SPECIFICATIONS
    G-13 Remote Unit RC-KS
    Control Glow in Dark Remocon Yes
    Unit Remocon Format ORION
    Format NEC
    Custom Code 71-8E
    Power Source Voltage(D.C) 3V
    UM size x pcs UM-4 x 2 pcs
    Total Keys 45 Keys
    Keys Power Yes
    1 Yes
    2 Yes
    3 Yes
    4 Yes
    5 Yes
    6 Yes
    7 Yes
    8 Yes
    9 Yes
    0/AV Yes
    Open/Close Yes
    Play Yes
    Stop Yes
    Display/Call Yes
    TV/DVD Yes
    Cancel Yes
    Audio Yes
    Angle Yes
    Subtitle Yes
    Title Yes
    Setup/Menu Yes
    Return Yes
    DVD Menu Yes
    Left/Select- Yes
    Right/Select+ Yes
    Select/Enter Yes
    Maker Yes
    Volume+ Yes
    Volume- Yes
    Repeat A-B Yes
    Zoom/ Quick View Yes
    Mute Yes
    Sleep No
    Jump Yes
    Text/Mix/TV Yes
    Search+ / Sub Page Yes
    Search- / Reveal Yes
    Skip+ / F/T/B Yes
    Skip- / Hold Yes
    Slow+ / Cyan Yes
    Slow- / Red Yes
    Pause/Still/Step/ Green Yes
    Up/ Set+/ CH Up/ Page Up Yes
    Down/ Set-/ CH Down/ Page Down Yes
    Play Mode/ Yellow Yes

    A3-4
    GENERAL SPECIFICATIONS
    G-14 Features Auto Shut Off Yes
    (TV) Auto Search Yes
    Auto Setup Yes
    CH Allocation Yes
    Auto CH Memory Yes
    Protect of FBT Leak Circuit Yes
    Power On Memory Yes
    T'Text Yes
    Text type Fastext
    Text Language English, French, Swedish, Hunganan, Finnish
    Turkish, German, Dutch, Portuguese, Spanish
    Italian, Greek
    Features Tray Lock Yes
    (DVD) VIDEO CD Playback Yes
    SVCD Playback Yes
    Overlay Graphics And Text No
    Command List No
    Entry Point Jump No
    MP3 Playback Yes
    WMA Playback Yes
    JPEG Playback Yes
    Digital Out (Dolby Digital) Yes
    (MPEG) Yes
    (PCM) Yes
    (DTS) Yes
    Down Mix Out (Dolby Digital) Yes
    (DTS) No
    3D Surround No
    Screen Saver No
    Audio DAC 192kHz / 24bit
    G-15 Accessories Owner's Manual Language English
    w/Guarantee Card No
    Remote Control Unit Yes
    Rod Antenna No
    Poles -
    Terminal -
    w/300 ohm to 75 ohm Antenna Adapter -
    Loop Antenna Yes
    Terminal Din type
    U/V Mixer No
    DC Car Cord (Center+) No
    Guarantee Card No
    Warning Sheet No
    Circuit Diagram No
    Antenna Change Plug No
    Service Facility List No
    Information Sheet No
    Important Safeguard No
    Dew/AHC Caution Sheet No
    AC Plug Adapter No
    Quick Set-up Sheet Yes
    Battery Yes
    UM size x pcs UM-4 x 2 pcs
    OEM Brand No
    AC Cord No
    AV Cord (2Pin-1Pin) No
    21pin-RCA Cable No
    RF Cable No
    Registration Card Yes
    PTB Sheet No
    Anti-Theft Sheet No
    Euro Warranty Information Sheet No
    Helpline Sheet Yes

    A3-5
    GENERAL SPECIFICATIONS
    G-16 Interface Switch Front Power(Tact) No
    Channel Up Yes
    Channel Down Yes
    Volume Up Yes
    Volume Down Yes
    Play Yes
    Stop Yes
    Skip+/Search+ Yes
    Skip-/Search- Yes
    Open/Close Yes
    Still/Pause No
    Main Power SW Yes
    Indicator Power No
    Stand-by Yes (Red)
    On Timer No
    Terminals Front Video Input RCA x 1
    Audio Input RCA x 2
    Other Terminal Headphone
    Rear Video Input No
    Audio Input No
    Video Output No
    Audio Output No
    Digital Audio Output Coaxial (DVD Only)
    Euro Scart 1-SCART
    Diversity No
    DC Jack 12V(Center +) No
    VHF/UHF Antenna Input DIN type
    G-17 Set Size Approx. W x D x H (mm) 362 x 365 x 382
    G-18 Weight Net (Approx.) 11.0kg (24.3lbs)
    Gross (Approx.) 12.5kg (27.6lbs)
    G-19 Carton Master Carton No
    Content -
    Material -
    Dimensions W x D x H(mm) -
    Description of Origin -
    Gift Box Material Double/White
    Dimensions W x D x H(mm) 423 x 447 x 443
    Description of Origin Yes
    Drop Test Natural Dropping At 1 Corner / 3 Edges / 6 Surfaces
    Height (cm) 62
    Container Stuffing(40' container) 700 Sets
    G-20 Material Cabinet Front PS 94HB
    Rear PS 94V0 Non-DECABROM
    Jack Panel -
    PCB Non-Halogen Demand Yes
    Eyelet Yes
    G-21 Environment Pb-free Soldering Yes
    Parts Specifica Yes

    A3-6
    DISASSEMBLY INSTRUCTIONS
    1. REMOVAL OF MECHANICAL PARTS 1-3: AV PCB/DVD BLOCK (Refer to Fig. 1-3)
    AND P.C. BOARDS 1. Remove the screw 1.
    2. Remove the screw 2.
    1-1: BACK CABINET (Refer to Fig. 1-1)
    3. Disconnect the following connectors:
    1. Remove the 4 screws 1. (CP301, CP302, CP402, CP3801 and CP3802).
    2. Remove the screw 2 which are used for holding the 4. Remove the AV PCB/DVD Block in the direction of arrow.
    Back Cabinet.
    3. Remove the AC cord from the AC cord hook 3. 1 2
    4. Remove the Back Cabinet in the direction of arrow. Front Cabinet

    Front Cabinet

    1 AV PCB/DVD Block

    Fig. 1-3

    1-4: DVD BLOCK (Refer to Fig. 1-4)


    1
    2
    1. Remove the 13 screws 1.
    3
    Back Cabinet
    2. Remove the Top Shield in the direction of arrow (A).
    3. Disconnect the following connectors:
    1 (CP8001 and CP8002).
    Fig. 1-1
    4. Remove the 4 screws 2.
    5. Remove the DVD Block in the direction of arrow (B).
    1-2: CRT PCB (Refer to Fig. 1-2)
    6. Remove the 2 screws 3.
    CAUTION: BEFORE REMOVING THE ANODE CAP, 7. Remove the Jack Shield.
    DISCHARGE ELECTRICITY BECAUSE IT 8. Remove the AV PCB in the direction of arrow (C).
    CONTAINS HIGH VOLTAGE.
    BEFORE ATTEMPTING TO REMOVE OR 1
    1 1
    REPAIR ANY PCB, UNPLUG THE POWER 1
    CORD FROM THE AC SOURCE. 1
    1 1
    1. Remove the Anode Cap. 1
    1
    Top Shield
    (Refer to REMOVAL OF ANODE CAP)
    1 1
    2. Disconnect the following connectors:
    (CP801 and CP803B). 1 1 2
    3. Remove the CRT PCB in the direction of arrow.
    2 2
    (A)
    CRT PCB DVD Block
    Front Cabinet

    (B)

    AV PCB
    3
    3

    Jack Shield (C)

    Bottom Plate
    Fig. 1-4
    Fig. 1-2

    B1-1
    DISASSEMBLY INSTRUCTIONS
    1-5: DVD PCB/DVD DECK (Refer to Fig. 1-5)
    1. Make the short circuit on the position as shown Fig. 1-5
    using a soldering. If you remove the DVD Deck with no
    soldering, the Laser may be damaged.
    2. Remove the 4 screws 1.
    3. Remove the DVD Deck in the direction of arrow (A).
    4. Disconnect the following connectors:
    (CP2601, CP2602 and CP2603).
    5. Remove the 2 screws 2.
    6. Remove the DVD PCB in the direction of arrow (B).

    2
    2
    DVD PCB

    Make the short circuit


    using a soldering.
    (B)
    1

    1 1

    DVD Deck

    Pick Up PCB
    (A)

    Deck Angle

    Fig. 1-5

    NOTE
    1. Use the Pb Free solder and the exclusive soldering iron.
    2. Manual soldering conditions
    • Soldering temperature: 350 ± 10˚C
    • Soldering time: Within 3 seconds
    • Soldering combination: Sn-3.0Ag-0.5Cu
    3. When Soldering/Removing of solder, use the drawing
    equipment over the Pick Up Unit to prevent the Flux
    smoke from it.
    4. When the installation of the DVD Deck, remove all the
    soldering on the short circuit position after the connection
    of Pick Up PCB and DVD PCB connector.

    B1-2
    DISASSEMBLY INSTRUCTIONS
    2. REMOVAL OF DVD DECK PARTS NOTE

    NOTE 1. In case of the Main Chassis Ass'y, install it from (1) to


    (4) in order. (Refer to Fig. 2-2-B)
    1. Do not disassemble the DVD DECK PARTS except 2. In case of the Main Chassis Ass'y installation, hook the
    listed parts here. Minute adjustments are needed if the wire on the Main Frame Ass'y as shown Fig. 2-2-C.
    disassemble is done. If the repair is needed except
    listed parts, replace the DVD MECHA ASS'Y. Main Frame Ass'y (Bottom Side)

    2-1: TRAY (Refer to Fig. 2-1-A)


    1. Set the Tray opened. (Refer to the DISC REMOVAL (3)
    METHOD AT NO POWER SUPPLY)
    Rack Loading
    2. Unlock the 2 supports 1 and remove the Tray.
    (3)
    Main Frame Ass'y (3)
    Traverse Holder

    (2) (1)

    Main Chassis Ass'y


    1
    Tray

    (4) (4)

    Fig. 2-1-A Check Lock


    Fig. 2-2-B
    NOTE
    Main Frame Ass'y
    1. In case of the Tray installation, install them as the
    circled section of Fig. 2-1-B so that the each markers
    are met.

    Main Frame Ass'y

    Check Hook Fig. 2-2-C

    2-3: LOADING MOTOR PCB ASS'Y/ LOADING BELT


    (Refer to Fig. 2-3-A)
    1. Remove the Loading Belt.
    2. Remove the screw 1.
    Tray 3. Remove the 2 screws 2.
    Fig. 2-1-B 4. Remove the Loading Motor PCB Ass'y.
    5. Remove the Pulley Gear.

    2-2: MAIN CHASSIS ASS'Y (Refer to Fig. 2-2-A) Loading Belt

    1. Remove the screw 1. 2


    2
    2. Unlock the 2 supports 2.
    3. Remove the Insulator (R) from the Main Frame Ass'y.
    4. Remove the Main Chassis Ass'y. Main Frame Ass’y

    1
    2
    Pulley Gear
    2
    Loading Motor PCB Ass’y
    Main Frame Ass'y 1

    • Screw Torque: 2.5 ± 0.3kgf•cm (Screw 1)


    • Screw Torque: 1.0 ± 0.3kgf•cm (Screw 2) Fig. 2-3-A
    Insulator (R)

    Main Chassis Ass'y

    • Screw Torque: 2.0 ± 0.5kgf•cm Fig. 2-2-A

    B2-1
    DISASSEMBLY INSTRUCTIONS
    NOTE 2-5: CLAMPER ASS'Y (Refer to Fig. 2-5-A)
    1. In case of the Pulley Motor installation, check if the 1. Press the Clamper and rotate the Clamper Plate
    value of the Fig. 2-3-B is correct. clockwise, then unlock the 3 supports 1.
    2. When installing the Loading Motor PCB Ass'y, install it 2. Remove the Clamper Plate, Clamper Magnet and
    correctly as Fig. 2-3-C. Clamper.
    3. In case of the Loading Motor PCB Ass'y installation,
    hook the wire on the Main Frame Ass'y as shown Fig. Clamper Plate
    2-3-C. Clamper Magnet

    Pulley Motor 7.0 ± 0.1mm Main Frame

    Loading Motor

    1 1
    Clamper
    1
    Safety surface for pressing Fig. 2-5-A
    of the insert.
    Fig. 2-3-B
    NOTE
    The Lever should be position 1. In case of the Clamper Ass'y installation, install
    between A and B.
    correctly as Fig. 2-5-B.
    Rack Loading A B

    Clamper Plate

    Clamper No gap

    Fig. 2-5-B
    Check Hook Loading Motor PCB Ass’y Fig. 2-3-C
    2-6: TRAVERSE HOLDER/INSULATOR (F)/INSULATOR
    2-4: RACK LOADING/MAIN GEAR/PULLEY GEAR (R) (Refer to Fig. 2-6-A)
    (Refer to Fig. 2-4-A) 1. Remove the Traverse Holder.
    1. Press down the catcher 1 and slide the Rack Loading. 2. Remove the 2 Insulator (F).
    2. Unlock the support 2 and remove the Pulley Gear. 3. Remove the Insulator (R).
    3. Remove the Main Gear.
    Insulator (R)
    Main Chassis Ass'y

    Pulley Gear Rack Loading Insulator (F)

    Main Gear
    Traverse Holder

    Main Frame Ass’y

    Insulator (F)
    2
    1
    Fig. 2-4-A Fig. 2-6-A
    NOTE
    NOTE
    1. In case of the Rack Loading installation, do not mesh it
    1. In case of the Insulator (F) installation, install correctly
    to the Main Gear as shown the Fig. 2-4-B.
    as Fig. 2-6-B.
    2. In case of the Insulator (R) installation, install correctly
    Rack Loading Check Hook
    as Fig. 2-6-C.

    Insulator (F)

    Traverse Holder

    Main Gear
    Fig. 2-4-B Fig. 2-6-B

    B2-2
    DISASSEMBLY INSTRUCTIONS

    Insulator (R) ~ FEED MOTOR ~


    Main Chassis Ass'y (Top Side)
    BLUE (4)

    ORANGE (3)

    Switch PCB Ass'y


    Fig. 2-6-C ~ SPINDLE MOTOR ~
    BLACK (2)

    2-7: RACK FEED ASS'Y/SWITCH PCB ASS'Y/FEED RED (1)


    MOTOR (Refer to Fig. 2-7-A)
    • Install wire from (1) to (4) in order.
    1. Remove the screw 1.
    2. Remove the Rack Feed Ass'y.
    3. Remove the screw 2.
    4. Remove the Switch PCB Ass'y. Fig. 2-7-D
    5. Remove the 2 screw 3.
    6. Remove the Feed Motor.
    7. Remove the Motor Gear. Main Chassis Ass'y (Bottom Side)

    Check Hook
    Check Hook
    1 Check Hook

    2 Rack Feed Ass'y

    3
    3

    Switch PCB Ass'y Check Hook

    • Loosen the wire in the direction of the arrow.


    Fig. 2-7-E
    Motor Gear

    Main Chassis Ass'y


    Feed Motor 2-8: FFC WIRE HANDLING
    • Screw Torque: 5.0 ± 0.3kgf•cm (Screw 1) 1. When installing the FFC, fold it correctly and install it as
    • Screw Torque: 3.0 ± 0.3kgf•cm (Screw 2)
    • Screw Torque: 1.0 ± 0.3kgf•cm (Screw 3) shown from Fig. 2-8-A to Fig. 2-8-C.
    • Screw Torque: 3.5 ± 0.3kgf•cm (Screw 4)
    Fig. 2-7-A NOTE

    NOTE 1. Do not make the folding lines except the specified


    positions for the FFC.
    1. When pushing the Rack Feed in the direction of the
    arrow, it should be restored to the original position by [ 24 pin FFC ]
    the spring force. (Refer to Fig. 2-7-B)
    2. In case of the Motor Gear installation, check if the value
    of the Fig. 2-7-C is correct. 50 ± 1mm Fold back at the border line of
    3. When installing the wire of the Switch PCB Ass'y, install the reinforcement plate.
    1mm

    Surfa ng
    ce

    it correctly as Fig. 2-7-D.


    Printi
    73 ±

    4. After the assembly of the Main Chassis Ass'y, hook the Fold
    it by 9 Fold 10mm
    wire on the Main Chassis Ass'y as shown Fig. 2-7-E. 0 ˚

    Double Sided Tape

    Fig. 2-8-A

    Push
    [ 5 pin FFC ]
    Reinforcement Plate Reinforcement Plate
    Rack Feed Ass'y
    Fig. 2-7-B (1) (3)
    10 ± 1mm
    Printing Surface
    55 ± 1mm
    Fold

    Reinforcement Plate
    Motor Gear Printing Surface
    6.0 ± 0.2mm (4)
    Fold
    Fold
    (2) Fold Printing Surface
    Feed Motor 10 ± 1mm
    Printing Surface

    Printing Surface
    60 ± 1mm

    Safety surface for pressing


    of the insert.
    Fig. 2-7-C
    • Proceed the steps (1) through (4).
    Fig. 2-8-B

    B2-3
    DISASSEMBLY INSTRUCTIONS

    [ 6 pin FFC ]
    Reinforcement Plate Reinforcement Plate

    (1) (3)
    10 ± 1mm
    Printing Surface
    53 ± 1mm
    Fold

    Printing Surface
    (4)
    Fold
    Fold
    (2) Fold Printing Surface
    10 ± 1mm
    Printing Surface

    Printing Surface
    52 ± 1mm

    • Proceed the steps (1) through (4). Fig. 2-8-C

    B2-4
    DISASSEMBLY INSTRUCTIONS
    3. REMOVAL OF ANODE CAP 3. After one side is removed, pull in the opposite direction
    to remove the other.
    Read the following NOTED items before starting work.
    NOTE
    * After turning the power off there might still be a potential
    Take care not to damage the Rubber Cap.
    voltage that is very dangerous. When removing the
    Anode Cap, make sure to discharge the Anode Cap's
    potential voltage. INSTALLATION
    * Do not use pliers to loosen or tighten the Anode Cap
    1. Clean the spot where the cap was located with a small
    terminal, this may cause the spring to be damaged.
    amount of alcohol. (Refer to Fig. 3-3.)
    REMOVAL
    NOTE
    1. Follow the steps as follows to discharge the Anode Cap. Confirm that there is no dirt, dust, etc. at the spot where
    (Refer to Fig. 3-1.) the cap was located.
    Connect one end of an Alligator Clip to the metal part of a
    flat-blade screwdriver and the other end to ground.
    While holding the plastic part of the insulated Screwdriver, Location of Anode Cap
    touch the support of the Anode with the tip of the
    Screwdriver.
    A cracking noise will be heard as the voltage is discharged.

    GND on the CRT

    Fig. 3-3

    2. Arrange the wire of the Anode Cap and make sure the
    wire is not twisted.
    3. Turn over the Rubber Cap. (Refer to Fig. 3-4.)

    Screwdriver CRT
    Support
    Alligator Clip

    GND on the CRT Fig. 3-4


    Fig. 3-1

    2. Flip up the sides of the Rubber Cap in the direction of 4. Insert one end of the Anode Support into the anode
    the arrow and remove one side of the support. button, then the other as shown in Fig. 3-5.
    (Refer to Fig. 3-2.)

    Rubber Cap

    Support
    CRT
    CRT Fig. 3-5
    Support
    Fig. 3-2
    5. Confirm that the Support is securely connected.
    6. Put on the Rubber Cap without moving any parts.

    B3-1
    DISASSEMBLY INSTRUCTIONS
    4. REMOVAL AND INSTALLATION OF 3. When IC starts moving back and forth easily after
    desoldering completely, pickup the corner of the IC using
    FLAT PACKAGE IC a tweezers and remove the IC by moving with the IC
    desoldering machine. (Refer to Fig. 4-3.)
    REMOVAL
    NOTE
    1. Put the Masking Tape (cotton tape) around the Flat
    Some ICs on the PCB are affixed with glue, so be
    Package IC to protect other parts from any damage. careful not to break or damage the foil of each IC
    (Refer to Fig. 4-1.) leads or solder lands under the IC when removing it.
    NOTE
    Masking is carried out on all the parts located within Blower type IC
    10 mm distance from IC leads. desoldering
    machine

    Masking Tape IC
    (Cotton Tape)

    Tweezers

    Fig. 4-1
    IC
    Fig. 4-3
    2. Heat the IC leads using a blower type IC desoldering
    machine. (Refer to Fig. 4-2.)
    4. Peel off the Masking Tape.
    NOTE
    Do not add the rotating and the back and forth 5. Absorb the solder left on the pattern using the Braided
    directions force on the IC, until IC can move back and Shield Wire. (Refer to Fig. 4-4.)
    forth easily after desoldering the IC leads completely. NOTE
    Do not move the Braided Shield Wire in the vertical
    direction towards the IC pattern.
    Blower type IC
    desoldering machine

    Braided Shield Wire

    Soldering Iron

    IC
    IC pattern Fig. 4-4
    Fig. 4-2

    B4-1
    DISASSEMBLY INSTRUCTIONS
    INSTALLATION 4. When bridge-soldering between terminals and/or the
    soldering amount are not enough, resolder using a Thin-
    1. Take care of the polarity of new IC and then install the tip Soldering Iron. (Refer to Fig. 4-8.)
    new IC fitting on the printed circuit pattern. Then solder
    each lead on the diagonal positions of IC temporarily.
    (Refer to Fig. 4-5.)
    Thin-tip Soldering Iron IC

    Soldering Iron

    Fig. 4-8

    5. Finally, confirm the soldering status on four sides of the


    Solder temporarily Solder temporarily
    IC using a magnifying glass.
    Confirm that no abnormality is found on the soldering
    Fig. 4-5 position and installation position of the parts around the
    IC. If some abnormality is found, correct by resoldering.
    2. Supply the solder from the upper position of IC leads NOTE
    sliding to the lower position of the IC leads.
    When the IC leads are bent during soldering and/or
    (Refer to Fig. 4-6.)
    repairing, do not repair the bending of leads. If the
    bending of leads are repaired, the pattern may be
    damaged. So, always be sure to replace the IC in this
    case.

    Solder Soldering Iron

    IC Supply soldering
    from upper position
    to lower position

    Fig. 4-6

    3. Absorb the solder left on the lead using the Braided


    Shield Wire. (Refer to Fig. 4-7.)
    NOTE
    Do not absorb the solder to excess.

    Soldering Iron
    IC

    Braided Shield Wire

    Fig. 4-7

    B4-2
    SERVICE MODE LIST
    This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily.

    To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote
    control for more than a standard time (second).

    Set Remocon Standard


    Set Key Operations
    Condition Key Time
    VOL. DOWN Reset the user setting items (PICTURE, VOLUME, LANGUAGE
    TV mode 0 2 sec.
    (Minimum) and NICAM AUTO/OFF) to the initial state for delivery.

    Initialization of the factory on TV.


    NOTE: Do not use this for the normal servicing.
    VOL. DOWN
    TV mode 1 2 sec. If you set a factory initialization, the memories are reset
    (Minimum)
    such as the channel setting, and the POWER ON total
    hours.

    Initialization of the factory on DVD.


    DVD mode VOL. DOWN NOTE: Do not use this for the normal servicing.
    4 2 sec.
    (No disc) (Minimum) The function will only work without the setting of DVD disc
    at DVD mode.

    POWER ON total hours are displayed on the screen.


    Refer to the "CONFIRMATION OF HOURS USED"
    VOL. DOWN
    TV mode 6 2 sec.
    (Minimum) Can be checked of the INITIAL DATA of MEMORY IC.
    Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".

    Display of the Adjustment MENU on the screen.


    VOL. DOWN
    ALL mode 9 2 sec. Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
    (Minimum)
    Adjustment).

    Releasing of PARENTAL LOCK.


    DVD mode Refer to the “PARENTAL CONTROL - RATING LEVEL”.
    STOP 7 3 sec.
    (No disc) NOTE: The function will only work without the setting of DVD disc
    at DVD mode.

    Method Operations
    Press the following remocon Tray cannot be opened.
    keys continuously. Refer to the “TRAY LOCK”.
    SETUP SUBTITLE 3 NOTE: No indications on the screen when the Tray Lock is setting.
    AUDIO 0

    CONFIRMATION OF HOURS USED


    POWER ON total hours can be checked on the screen. Total hours are displayed in 16 system of notation.
    NOTE: If you set a factory initialization, the total hours is reset to "0".
    1. Set the VOLUME to minimum. ADDRESS DATA

    2. Press both VOL. DOWN button on the set and Channel


    button (6) on the remote control for more than 2 seconds.
    3. After the confirmation of using hours, turn off the power. INIT 01 00 Initial setting content of MEMORY IC.
    CRT ON 0010 POWER ON total hours.
    = (16 x 16 x 16 x thousands digit value)
    + (16 x 16 x hundreds digit value)
    + (16 x tens digit value)
    FIG. 1 + (ones digit value)

    C-1
    WHEN REPLACING EEPROM (MEMORY) IC
    If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to
    ensure correct data settings while making reference to TABLE 1.
    NOTE: No need setting for after INI 16 due to the adjustment value.

    INI +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F
    00 --- 00 01 22 3F B8 A0 41 40 01 60 0C 13 00 00 07

    10 50 00 00 00 55 22 03 --- --- --- --- --- --- --- --- ---

    Table 1
    1. Enter DATA SET mode by setting VOLUME to minimum.
    2. Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 2 seconds.
    ADDRESS and DATA should appear as FIG 1.
    ADDRESS DATA

    INIT 01 00
    CRT ON 0010

    FIG. 1
    3. ADDRESS is now selected and should "blink". Using the RIGHT/LEFT button on the remote, step through the ADDRESS
    until required ADDRESS to be changed is reached.
    4. Press ENTER to select DATA. When DATA is selected, it will "blink".
    5. Again, step through the DATA using RIGHT/LEFT button until required DATA value has been selected.
    6. Pressing ENTER will take you back to ADDRESS for further selection if necessary.
    7. Repeat steps 3 to 6 until all data has been checked.
    8. When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input.
    After the data input, set to the initializing of shipping.
    9. Turn POWER on.
    10. Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds.
    11. After the finishing of the initializing of shipping, the unit will turn off automatically.
    The unit will now have the correct DATA for the new MEMORY IC.

    C-2
    ELECTRICAL ADJUSTMENTS
    1. BEFORE MAKING ELECTRICAL NO. FUNCTION NO. FUNCTION
    00 CUT OFF 20 TINT
    ADJUSTMENTS 01 RF AGC 21 SHARP
    02 AGC GAIN 22 CONT CENT
    Read and perform these adjustments when repairing the 03 R DRIVE 23 CONT MAX
    04 R CUTOFF 24 CONT MIN
    circuits or replacing electrical parts or PCB assemblies. 05 G DRIVE 25 COLOR CENT
    06 G CUTOFF 26 COLOR MAX
    CAUTION 07 B DRIVE 27 COLOR MIN
    08 H POSI 50 28 M R CUT OFF
    • Use an isolation transformer when performing any 09 V POSI 50 29 M G CUT OFF
    service on this chassis. 10 V POSI 60 30 M B CUT OFF
    11 V SIZE 50 31 CVBS OUT
    • Before removing the anode cap, discharge electricity 12 V SIZE 60 32 APR THR
    because it contains high voltage. 13 VCO COARSE 33 BELL FILTER
    14 VCO FINE 34 BANDPASS
    • When removing a PCB or related component, after 15 --- 35 H POSI OSD
    unfastening or changing a wire, be sure to put the wire 16 --- 36 V POSI OSD
    17 BRIGHT CENT 37 H POSI TXT
    back in its original position. 18 BRIGHT MAX 38 V POSI TXT
    • When you exchange IC and Transistor for a heat sink, 19 BRIGHT MIN 39 H POSI 60
    Fig. 1-2
    apply the silicon grease on the contact section of the
    heat sink. Before applying new silicon grease, remove all
    the old silicon grease. (Old grease may cause damages 2. BASIC ADJUSTMENTS
    to the IC and Transistor).
    2-1: CONSTANT VOLTAGE
    Prepare the following measurement tools for electrical
    1. Connect the digital voltmeter to D3813.
    adjustments.
    2. Set condition is AV MODE without signal.
    1. Oscilloscope 3. Using the remote control, set the brightness and contrast
    2. Digital Voltmeter to normal position.
    3. Pattern Generator 4. Adjust the VR3801 until the digital voltmeter is 135 ± 0.5V.

    On-Screen Display Adjustment 2-2: VCO


    1. Set the volume level to minimum. 1. Place the set with Aging Test for more than 10 minutes.
    2. Press the VOL. DOWN button on the set and the 2. Connect the oscillator (39.5MHz) to TP101.
    channel button (9) on the remote control for more than 3. Activate the adjustment mode display of Fig. 1-1 and
    2 seconds to display adjustment mode on the screen as press the channel button (13) on the remote control to
    shown in Fig. 1-1. select "VCO COARSE".
    4. Press the LEFT/RIGHT button on the remote control
    until the "OK" appear on the screen. If the "OK" is not
    35 H POSI OSD 129 VCO Status -
    36 V POSI OSD 57 XXX displayed, select the "-" side on the changed from "+" to
    37 H POSI TEXT 125
    38 V POSI TEXT 57
    "-".
    39
    00
    H POSI 60
    CUT OFF
    42 5. Press the CH UP button once to set to "VCO FINE"
    9- EXT
    mode.
    6. Press the LEFT/RIGHT button on the remote control to
    select the 5 step down point from the upper limit on the
    "OK".
    (Example: In case of the "OK" point 41, select 36.)

    2-3: RF AGC
    Fig. 1-1 1. Receive the UHF (63dB).
    2. Place the set with Aging Test for more than 15 minutes.
    3. Connect the digital voltmeter between the pin 5 of
    3. Use the Channel UP/DOWN button or Channel button
    CP101 and the pin 1 of CP101.
    (0-9) on the remote control to select the options shown
    4. Activate the adjustment mode display of Fig. 1-1 and
    in Fig. 1-2.
    press the channel button (01) on the remote control to
    4. Press the MENU button on the remote control to end
    select "RF AGC".
    the adjustments.
    5. Press the LEFT/RIGHT button on the remote control
    until the digital voltmeter is 2.4 ± 0.05V.

    D-1
    ELECTRICAL ADJUSTMENTS
    2-4: FOCUS 2-7: VERTICAL SIZE
    1. Receive a broadcast. NOTE: Adjust after performing adjustments in section 2-6.
    2. Turn the Focus Volume fully counterclockwise once. 1. Receive the monoscope pattern from the Pattern
    3. Adjust the Focus Volume until picture is distinct. Generator.
    2. Using the remote control, set the brightness and
    2-5: HORIZONTAL POSITION
    contrast to normal position.
    1. Receive the monoscope pattern from the Pattern 3. Activate the adjustment mode display of Fig. 1-1 and
    Generator. press the channel button (11) on the remote control to
    2. Using the remote control, set the brightness and select "V SIZE 50".
    contrast to normal position. 4. Adjust by using the LEFT/RIGHT button on the remote
    3. Activate the adjustment mode display of Fig. 1-1 and control so that the Up/Down OVER SCAN Quantity
    press the channel button (08) on the remote control to becomes equal to the Right/Left OVER SCAN Quantity.
    select "H POSI 50". 5. Receive a broadcast and check if the picture is normal.
    4. Press the LEFT/RIGHT button on the remote control 6. Receive the cross hatch signal of NTSC. (Audio Video
    until the SHIFT quantity of the OVER SCAN on right Input)
    and left becomes minimum. 7. Press the AV button on the remote control to set to the
    5. Receive the cross hatch signal of NTSC. (Audio Video AV mode.
    Input) 8. Activate the adjustment mode display of Fig. 1-1 and
    6. Press the AV button on the remote control to set to the press the channel button (12) on the remote control to
    AV mode. select "V SIZE 60".
    7. Activate the adjustment mode display of Fig. 1-1 and 9. Adjust by using the LEFT/RIGHT button on the remote
    press the channel button (39) on the remote control to control so that the Up/Down OVER SCAN Quantity
    select "H POSI 60". becomes equal to the Right/Left OVER SCAN Quantity.
    8. Press the LEFT/RIGHT button on the remote control 10. Receive a broadcast and check if the picture is normal.
    until the SHIFT quantity of the OVER SCAN on right
    and left becomes minimum. 2-8: VERTICAL LINEARITY
    NOTE: Adjust after performing adjustments in section 2-7.
    2-6: VERTICAL POSITION
    After the adjustment of Vertical Linearity, reconfirm
    NOTE: Adjust after performing adjustments in section 2-5. the Vertical Position and Vertical Size adjustments.
    1. Receive the monoscope pattern from the Pattern 1. Receive the monoscope pattern from the Pattern
    Generator. Generator.
    2. Using the remote control, set the brightness and 2. Using the remote control, set the brightness and
    contrast to normal position. contrast to normal position.
    3. Activate the adjustment mode display of Fig. 1-1 and 3. Adjust the VR401 until the SHIFT quantity of the OVER
    press the channel button (09) on the remote control to SCAN on upside and downside becomes minimum.
    select "V POSI (50)".
    4. Check if the step No. V. POSI (50) is "10". 2-9: OSD HORIZONTAL
    5. Adjust the VR402 until the horizontal line becomes fit to 1. Using the remote control, set the brightness and
    the notch of the shadow mask. contrast to normal position.
    6. Receive the cross hatch signal of NTSC. (Audio Video 2. Activate the adjustment mode display of Fig. 1-1 and
    Input) press the channel button (35) on the remote control to
    7. Press the AV button on the remote control to set to the select "H POSI OSD".
    AV mode. 3. Press the LEFT/RIGHT button on the remote control
    8. Using the remote control, set the brightness and until the difference of A and B becomes minimum.
    contrast to normal position. (Refer to Fig. 2-1)
    9. Activate the adjustment mode display of Fig. 1-1 and
    press the channel button (10) on the remote control to
    select "V POSI (60)". 35 H POSI OSD 129 VCO Status -
    36 V POSI OSD 57 XXX
    10. Check if the step No. V. POSI (60) is "05". 37 H POSI TEXT 125
    38 V POSI TEXT 57
    39 H POSI 60 42
    00 CUT OFF
    9- EXT

    A B
    Fig. 2-1

    D-2
    ELECTRICAL ADJUSTMENTS
    2-10: CUT OFF 2-13: CONTRAST CENT
    1. Set condition is AV MODE without signal. 1. Activate the adjustment mode display of Fig. 1-1 and
    2. Using the remote control, set the brightness and press the channel button (22) on the remote control to
    contrast to normal position. select "CONT CENT".
    3. Place the set with Aging Test for more than 15 minutes. 2. Press the LEFT/RIGHT button on the remote control
    4. Activate the adjustment mode display of Fig. 1-1 and until the contrast step No. becomes "22".
    press the channel button (00) on the remote control to 3. Receive a broadcast and check if the picture is normal.
    select "CUT OFF". 4. Press the AV button on the remote control to set to the
    5. Adjust the Screen Volume until a dim raster is obtained. AV mode. Then perform the above adjustments 1~3.
    5. Press the DVD button on the remote control to set to
    2-11: WHITE BALANCE the DVD mode.
    6. Activate the adjustment mode display of Fig. 1-1 and
    NOTE: Adjust after performing CUT OFF adjustment. press the channel button (22) on the remote control to
    1. Place the set with Aging Test for more than 15 minutes. select "CONT CENT".
    2. Receive the gray scale pattern from the Pattern 7. Press the LEFT/RIGHT button on the remote control to
    Generator. decrease the step numbers 5 steps to the contrast cent.
    3. Using the remote control, set the brightness and
    contrast to normal position. 2-14: COLOR CENT
    4. Activate the adjustment mode display of Fig. 1-1 and 1. Receive the PAL color bar pattern. (RF Input)
    press the channel button (03) on the remote control to 2. Using the remote control, set the brightness, contrast
    select "R DRIVE". and color to normal position.
    5. Press the LEFT/RIGHT button on the remote control to 3. Connect the oscilloscope to TP803.
    select the "R DRIVE", "G DRIVE", "M R CUT OFF" or 4. Activate the adjustment mode display of Fig. 1-1 and
    "M G CUT OFF". press the channel button (25) on the remote control to
    6. Adjust the LEFT/RIGHT button on the remote control to select "COLOR CENT".
    whiten the R DRIVE, G DRIVE, M R CUT OFF, and M G 5. Adjust the VOLTS RANGE VARIABLE knob of the
    CUT OFF at each step tone sections equally. oscilloscope until the range between white 100% and
    7. Perform the above adjustments 5 and 6 until the white 0% is set to 4 scales on the screen of the oscilloscope.
    color is looked like a white. 6. Press the LEFT/RIGHT button on the remote control
    until the red color level is adjusted to 90 ± 10% of the
    2-12: BRIGHT CENT
    white level. (Refer to Fig. 2-2)
    1. Receive the PAL black pattern*. (RF Input) 7. Receive the PAL color bar pattern. (Audio Video Input)
    2. Using the remote control, set the brightness and 8. Press the AV button on the remote control to set to the
    contrast to normal position. AV mode. Then perform the above adjustments 2~6.
    3. Activate the adjustment mode display of Fig. 1-1 and 9. Press the DVD button on the remote control to set to
    press the channel button (17) on the remote control to the DVD mode.
    select "BRIGHT CENT". 10. Activate the adjustment mode display of Fig. 1-1 and
    4. Press the LEFT/RIGHT button on the remote control press the channel button (25) on the remote control to
    until the screen begin to shine. select "COLOR CENT".
    5. Receive the PAL black pattern*. (Audio Video Input) 11. Press the LEFT/RIGHT button on the remote control to
    6. Press the AV button on the remote control to set to the set the same step numbers as the AV mode.
    AV mode. Then perform the above adjustments 2~4.
    7. Press the DVD button on the remote control to set to
    the DVD mode.
    8. Activate the adjustment mode display of Fig. 1-1 and
    press the channel button (17) on the remote control to
    select "BRIGHT CENT".
    9. Press the LEFT/RIGHT button on the remote control to 90% 100%
    set the same step numbers as the AV mode.
    *The Black Pattern means the whole black raster signal.
    Select the "RASTER" of the pattern generator, set to
    the OFF position for each R, G and B.
    Fig. 2-2

    D-3
    ELECTRICAL ADJUSTMENTS
    2-15: Confirmation of Fixed Value (Step No.)
    Please check if the fixed values of the each adjustment
    items are set correctly referring below.
    NO. FUNCTION STEP NO.
    02 AGC GAIN 00
    04 R CUTOFF 31
    06 G CUTOFF 31
    07 B DRIVE 45
    09 V POSI 50 10
    10 V POSI 60 05
    18 BRIGHT MAX 30
    19 BRIGHT MIN 00
    20 TINT 31
    21 SHARP 08
    23 CONTRAST MAX 50
    24 CONTRAST MIN 10
    26 COLOR MAX 50
    27 COLOR MIN 10
    30 M B CUT OFF 100
    31 CVBS OUT 20
    32 APR THRESHOLD 15
    33 BELL FILTER 22
    34 BANDPASS 00
    36 V POSI OSD 57
    37 H POSI TXT 135
    38 V POSI TXT 57

    D-4
    ELECTRICAL ADJUSTMENTS
    3. PURITY AND CONVERGENCE 3-3: STATIC CONVERGENCE
    ADJUSTMENTS NOTE
    NOTE Adjust after performing adjustments in section 3-2.
    1. Turn the unit on and let it warm up for at least 30 1. Receive the crosshatch pattern from the color bar
    minutes before performing the following adjustments. generator.
    2. Place the CRT surface facing east or west to reduce the 2. Combine red and blue of the 3 color crosshatch
    terrestrial magnetism. pattern on the center of the screen by adjusting the pair
    3. Turn ON the unit and demagnetize with a Degauss Coil. of 4 pole magnets.
    3. Combine red/blue (magenta) and green by adjusting the
    3-1: STATIC CONVERGENCE (ROUGH ADJUSTMENT) pair of 6 pole magnets.
    1. Tighten the screw for the magnet. Refer to the adjusted
    CRT for the position. (Refer to Fig. 3-1) 3-4: DYNAMIC CONVERGENCE
    If the deflection yoke and magnet are in one body,
    NOTE
    untighten the screw for the body.
    2. Receive the green raster pattern from the color bar Adjust after performing adjustments in section 3-3.
    generator. 1. Adjust the differences around the screen by moving the
    3. Slide the deflection yoke until it touches the funnel side deflection yoke upward/downward and right/left.
    of the CRT. (Refer to Fig. 3-2-a)
    4. Adjust center of screen to green, with red and blue on 2. Insert three wedges between the deflection yoke and
    the sides, using the pair of purity magnets. CRT funnel to fix the deflection yoke.
    5. Switch the color bar generator from the green raster (Refer to Fig. 3-2-b)
    pattern to the crosshatch pattern.
    6. Combine red and blue of the 3 color crosshatch RGB RGB
    pattern on the center of the screen by adjusting the pair
    of 4 pole magnets.
    7. Combine red/blue (magenta) and green by adjusting the R
    pair of 6 pole magnets. G
    8. Adjust the crosshatch pattern to change to white by B
    R
    repeating steps 6 and 7. G
    B
    3-2: PURITY
    UPWARD/DOWNWARD SLANT RIGHT/LEFT SLANT
    NOTE Fig. 3-2-a
    Adjust after performing adjustments in section 3-1.
    1. Receive the green raster pattern from color bar
    generator.
    2. Adjust the pair of purity magnets to center the color on
    the screen.
    Adjust the pair of purity magnets so the color at the WEDGE WEDGE
    ends are equally wide.
    3. Move the deflection yoke backward (to neck side)
    slowly, and stop it at the position when the whole screen
    is green.
    4. Confirm red and blue color.
    5. Adjust the slant of the deflection yoke while watching WEDGE
    the screen, then tighten the fixing screw.
    DEFLECTION YOKE WEDGE POSITION
    DEFLECTION YOKE SCREW Fig. 3-2-b
    MAGNET SCREW

    6 POLE MAGNETS
    4 POLE MAGNETS
    PURITY MAGNETS
    Fig. 3-1

    D-5
    ELECTRICAL ADJUSTMENTS
    4. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION)

    CRT PCB

    CP801
    CD805
    CP806 R810

    TP803
    J801

    CRT CP802B CP803B

    CD802 CD803

    J4206 VR3801
    CP803A
    FB401

    CP3801
    TU101 D3813

    CP3802 CP402

    CRT
    CP101
    CRT
    CD3802

    TP101

    CP802A

    CP8002
    VR402
    VR401
    CD302
    CP301

    CP8001 CP302
    CD301

    SPEAKER
    CD8101

    SPEAKER
    AC IN

    S3801 S3802

    AV PCB

    DVD DECK
    CP2603
    CP8101
    CP2602

    CD4002
    CP2601

    DVD PCB
    CD2001

    CD2301

    CD2302

    D-6
    DVD BLOCK DIAGRAM

    FLASH 8M 64M SDRAM


    IC4007 IC4005
    SST39VF800A- K4S641632H-
    70-4C-EKE UC75

    SDA0~SDA11
    SDD0~SDD15
    HA0~HA20,
    HD0~HD15 TV BLOCK
    DVD LOADER CD4002
    DM3
    RFA_SDEN, DATA, SCLK
    A, B, C, D, E, F
    READ CHANNEL TX
    Pick up AAF_CE, FE, TE, PI
    RF IC2601 RX
    ZR36708TQC FNN, FNP UNREG+3.8V
    CD, DVD, LD
    VBIASS0, S1 P.CON+5V
    DEFECT, LINK, MIRR, LDON MPEG/MICON/DSP P.CON+9V
    Loading IC4001 SPDIF
    Motor ZR36762PQCG_V 1.9V REG+1.9V
    IC4006
    SIP1117L-ADJ-TP
    OPEN, CLOSE
    Spindle/
    Sled CP8101
    Motor
    DVD RESET
    SPDL_SEND
    I 2 CDAT I 2 CCLK DVD VIDEO
    DAC B, C, D VIDEO BUFFER
    SPINDLE, SLED_PWM Y
    Q8102 ~ Q8104
    TR+/–, FO+/– TRACK, FOCUS_DAC EEPROM C
    Motor Driver ADC IN 5, 6, 7 IC4002
    IC2301 BR24L02F-WE2
    SPDL+/–, SLED+/– LA6565-TE-L-E S MUTE DVD AUDIO L
    DVD AUDIO R
    LD+/–
    ZERO

    ASDATA0
    AMCLK
    ABCLK
    ALRCLK

    DVD AUDIO L
    STEREO DAC
    IC8102 DVD AUDIO R
    PCM1753DBQR

    E-1 E-2
    TV BLOCK DIAGRAM *A---P.CON+9V
    *B---P.CON+12V
    *C---P.CON+A5V
    *D---CHROMA+5V
    TU101 *E---AT+5.7V
    SCL SDA AGC IF *F---AT–8V
    SAW FILTER
    4 5 1 11 CF606
    1 5 4
    FROM DVD BLOCK
    AMP *A *C
    IC4201
    NJM4580M(TE1) CHROMA
    IC601 STV2246H
    VIDEO SW MEMORY Q804
    DVD_A OUT_L 3 7
    IC602 MM1502XNRE IC199 BR24L08F-WE2 30
    6 BLUE AMP
    DVD_A OUT_R 5 1 Q805
    *A 7
    5 6 *E
    4 2 1 6 8 31 GREEN AMP
    V801
    Q4203 *B Q4209~Q4212 Q806 CRT
    51
    ZERO MUTE MUTE 32 RED AMP
    52
    DVD CVBS
    44 Q405 Q406 9 3
    DVD RESET 7
    DVD_C 23 H. OUT F
    48 H.DRIVE 8
    RX
    22
    TX
    55 13 19
    VIDEO SW OSD B 15 34

    SDA
    DVD_OUT-H
    SCL
    *E 2 RESET 47 3 V.DRIVE 1
    DVD_Y 4 IC4206 2 IC401 TDA8174A
    OSD G 16 35
    MM1501XNRE 1 49 DY801
    6 1 RESET OSD R 17 36 10
    X101 40
    IC102 PST3231NR OSC_IN 51
    *A 4MHz
    28
    SPDIF-134 MICON W/ FB401
    T'TEXT X601
    4 DVD IC101 OSC_OUT 50 4.433619MHz 1 F
    27 26 25 55 20

    FORTHD VCR1
    RESET
    OECF017C
    42 AV_1 V-SYNC 41 3 S

    TUNER HI

    VOLUME
    A_MUTE
    43 AV_2 H-SYNC 40 10 HV
    20 RX KEY_1 56
    *B 47 TX KEY_2 8
    53 46 3 48
    *E
    1
    AUDIO SW
    4 VOL DOWN
    IC4204
    MM1501XNRE 6 VOL UP
    SOUND +B
    2
    Q303 SPEAKER CH DOWN
    1 MUTE SP301
    *B 9 SOUND AMP 4
    4 CH UP
    AUDIO_SW Q4208 IC302
    1 3 6 AN7523N 2
    IC4203 10 BUFFER SPEAKER PLAY
    AUDIO SW
    4 2 BA7644AN SP302
    IC4205 *B
    MM1501XNRE 6 8 6 OPEN/CLOSE
    Q304 9 SOUND AMP 4
    2
    MUTE IC301 STOP
    6 2
    1 AN7523N
    4 <<SKIP
    Q4202
    AUDIO_SW
    2 IC4202 10 BUFFER SOUND +B SKIP>>
    7
    3 BA7644AN *B
    8 6 2
    Q4201 3 HEADPHONE JACK
    D.AUDIO_DRIVER 5 J4202
    2 2 2 1

    AUDIO R AUDIO L VIDEO


    2 1 6 3 8 19 20 2 16 15 11 7 J4205 J4204 J4203

    COAXIAL 21PIN
    J4201 J4206

    E-3 E-4
    POWER BLOCK DIAGRAM

    DEGAUSS

    SOUND+B

    Q3003
    DVD 3.3V
    REG P.CON+3.3V
    DEGAUSS COIL

    RY3801 Q3801
    Q3004
    DEGAUSS
    RELAY SW
    RELAY CURRENT
    CTL.
    L3800

    VOLT CURRENT CONTROL

    TH3801
    IC3002 LA6324NML-TE-L

    TRANSFORMER 7
    SWITCHING Q3014
    F3801 D3802~D3805 3
    T3801 PROTECTOR
    AC IN

    1 5
    RECTIFIER
    11 12
    4
    18 14
    IC3804 IC3801 8
    8
    Q3805 PS2561AL1-1-V(W) STR-W6853 Q3009
    FEED BACK 15
    FEED BACK POWER REG. 5 CURRENT CTL.
    SW
    Q3010
    +B ADJ.
    VR3801

    17 A9V REG P.CON+A9V


    6V REGULATOR
    13 IC3001 KIA78R06API
    Q3007
    Q3001
    CURRENT CTL.
    1 4 2
    DVD
    DVD_POWER_H
    POWER CTL

    Q3008

    DVD 5V REG P.CON+5V A


    Q3011

    SW P.CON+5V
    Q3002

    Q3013 VOLTAGE

    SW P.CON+12V
    Q3012
    AT+5.7V
    SW

    POWER ON-H

    +B
    Q3005 Q3006
    DVD 9V REG CURRENT CTL.

    P. CON+9V

    E-5 E-6
    F-1
    DMD008A

    Q2602
    C4011_1 C2608_1 C2640_1 C2641_1
    R2618

    C4042
    C4071_1 Q2601

    B4002
    C4043

    C2610
    C2612
    C2613
    C4063_1 R4040
    W854

    D2601

    R2645
    C2648

    C2655
    R2617

    R2646
    C4053_1 C2614 R2601

    R2616
    R2615
    W821

    C2622
    C4091 W823

    R4041
    C4039
    B4007 C2621
    D4001 C4062

    IC4007
    C4070_1

    33
    B4005 R2608 17

    R2609
    R2607 C2607

    C4095

    Q4004
    CP2601

    C4084_1 C2620 C2606


    R4013 C4067_1 IC2601

    B4006
    C4068_1 C2605
    R4011 C4021_1 C4064 C2619
    1

    C2616
    49 C2604

    CD4002
    R4034 R4054 R4053
    C4083_1

    C4036
    R4033 R4032 L4001 R2643 R2613 C2603 C2634
    C4082 R2644
    R4046
    C4077 C2654 R2614

    R4057
    C2633
    C2629 C2302

    C4017
    C4016
    C4078_1 R2612
    C2644_1 C2628 C2624 R2621 R2303

    IC4006
    C4008 C2625 R2619
    C4047

    R4049

    53

    NR4001
    C2646_1

    R4050
    B2605
    R4051
    B2604
    R2622
    R2623
    Q2605

    R4052
    R4072

    C4002
    C2643_1
    R2647

    R4048 C4003

    NR4002 NR4003
    R4060 R2336
    R2624

    IC4005
    R2620

    NR4004
    Q2604 Q2603

    C4041
    C4046

    IC4001
    C4022 C2309 C2310_1
    R2327
    C4040 R2334

    R8114
    DVD (TOP SIDE)

    R4017

    R8112
    C8126
    R4038

    NR4005 NR4006
    R2324

    R2330

    C8113
    R4001 R2304 C2303
    R4039 R2337
    C4045 C4050 R2319 R2325
    C8114

    NR4007
    R4003

    105
    157

    C8122
    R8115
    R8113
    C8125 R2326 R2328
    R4004
    R4061

    R2321
    CP2602

    C4007 R4005 C2306


    R2316

    NR4008
    R2339
    R4024 R2317

    C4038
    C8119_1 R4068 R4014 C4069_1
    Q8104 IC8102 C4031 C2313

    C8112
    X4001

    L8104
    IC2301

    CP8101_3
    R4071 R4044
    HS2301

    B4010 R4025

    W824
    R4027
    C4098
    R4026 R2305
    R4043

    Q8103 R4020 R4022


    R4058

    C8121_1 R4035
    CP2603

    R4021
    W863

    R2306_1
    R4019

    L8102 C4037 R4031


    C8109 R2307
    R2308

    Q8102
    D8111
    C4094

    C8104
    D8112
    C4093 R2301

    IC4002
    L8103
    R2651
    R2650

    C2314_1

    W826
    C8110 R2338 R2635
    C8107 R2653 R2649
    R2652

    DMD008A

    C2305 C2301 C2658


    R2318_1
    R4016

    R2329
    C8108 R2323
    C8105 R2310_1
    C4032 R2309 C2660
    C4079
    R2312_1
    R8107 C8106 C4081 C4035 C4034
    R4036

    C2659
    R4037

    R8118
    R4012 R2320
    C4096 C2304 C2308
    PRINTED CIRCUIT BOARDS

    R8119 C8111 C4026 R2322


    R2313_1 R2315
    R8108
    R2314_1
    R4042

    R2335
    W864 C2307
    C8120
    R4045 C4033
    R8120
    R4069

    R8109
    C4074 C2657
    C4025 R4002
    C4005
    C4024 C4027
    B8103 C4086 C2312
    C4023 R4018 C4004
    B4001 C4085
    C4088 C4006
    C4076
    R4064 C4089

    R4059 R4008 C4029 C4090

    C4020 C4028 C4030


    W825
    R2331

    C4019
    C4010 C4001 C2642
    R4056

    C4013
    C4066 C4018 C2311
    C2645
    C4014 C2647

    C2635
    DVD (BOTTOM SIDE)

    B4008 C2627
    C4073
    C4080 C4099 R2611 C2632 C2626
    C4097 B2603
    C4072

    R2605 C2609
    C4065
    B4004
    C2618 R2610
    C2623 C2636
    C2615 C2611
    C4092 C4052
    C4075
    C2617 R2603 C2638
    B4003 R2602
    R2604

    R2648

    C4012 B2602 C2637


    C2639 B2601
    W806
    F-2
    F-4
    J4201

    C431 W816
    VR3801

    W859

    D413
    CP803A
    L4202

    C4204_1 J4206
    Q3805

    1
    0_ B4201
    45 R423 C667 C4219_1
    R
    C3836 D3812
    C432
    R3822

    22
    C38

    D407 20 C3809
    R490 R38
    D3803
    D3802

    IC3804
    R3814

    IC3801
    TU101
    C3810

    D405
    D3814

    W843
    D3807
    19

    R3810
    D38
    R3823

    R3803

    HS3801
    R3824

    C3835
    R410

    C3802
    05

    R3807
    W005

    T3801

    C3815_2
    38
    R

    W164
    W838

    W852
    R3812
    21

    FB401_1 D3806 D3804 W006


    D38

    D3809 R3808
    C3804
    C3844
    D3823 B3801 C3814
    D3805
    W007 C148
    B3802

    W003 L3801
    C429

    L401 C424
    R447

    CP3801
    R3832
    W001

    C3817

    C422
    D411

    R448

    0
    82
    D3

    B403
    D3813

    C423
    Q406
    C3842

    W837 18
    CP402

    B402 38
    C
    W002
    C3807
    R456

    HS402 R3827
    D3808 R3801
    CP3802
    R3806
    R460

    D404
    3

    R3831
    1

    R623
    R38
    Q3806

    C3831
    C404

    C3801_1
    W018 W004 R408 TH3801
    R3819
    T401

    D3009 W016 C3840 FH3802 F3801 FH3801


    W010 C3002
    CD401 HS3002
    R3001

    C418
    RY3801
    R103

    R3830

    C3832 D3815
    C3829

    CP101
    R430 IC3001
    Q3002

    D406
    D3824
    R409

    R411

    W026

    Q3003 C4223_1
    W029
    W028

    R416 W008
    C403 R3012 R3833
    W027

    R3802
    W159

    S806Y
    D3001

    R121
    W014
    AV/CRT (INSERTED PARTS)

    S810X
    PRINTED CIRCUIT BOARDS

    C3004
    Q405

    HS3001
    R3022

    Q3005 D3801 TP101


    R3005

    C632
    Q3008

    C421 W017 R630 CF602


    35 W163
    R30 Q3801
    Q3011

    C3001 R3804
    S811Y

    L402 R3027 C3021


    C640
    R3016

    W011

    D107
    W019
    R3019
    C3027

    C450 R3028 C3011 C3010 R104


    Q3010

    W025
    L3001_1
    Q3013

    W166
    R421

    R413

    C666_1 W035
    W009 W160 W024
    R3018

    W841 L606
    D102

    R107

    R3007

    R612
    W030
    L603

    C144
    SOLDER SIDE

    W158 R3024
    R3021

    L604
    R419_1 D108 W021 C620
    R3020 D602
    W022 C614 C613_1

    CP802A
    W013

    C417 C405 R3011

    L103
    C3013 W023
    R417_1

    R3014 C631
    C3020 C607
    W055
    W015

    W870
    W033
    W032

    W080
    W051 W066 CF606_1
    R420

    C414
    C3015

    W862
    W062

    S810Y
    R407

    S803Y
    R3050

    R624

    C3017
    D603

    W059
    S811X

    D4207
    W046
    C413

    W042
    C3012 C628 L608
    W041 D3012
    L4205_2
    W036
    W863

    W048

    W057
    HS401_1

    C4248
    D3008
    D3006
    D3005

    W043

    W067

    S807X
    C3006 C4243 C4247
    W074

    L611

    L610
    IC601
    VR402

    W058
    X601

    W830 W081

    L609

    W855
    W075

    D604 C642_1
    C142 R4259 R665 W082
    W076
    D403

    C4249_1
    R412_2

    R4260 W161
    W044

    W071 W089
    C4250_1 CF609

    R666
    C4236_1 W068
    VR401

    W165
    W083

    W078
    W053
    C4257_1
    S809X

    C4256_1

    CP8002
    C4252_1 W064 W069 C641

    R654
    C412

    W065 W084
    IC401

    IC4203

    C4251_1
    R403

    R4258 W049
    IC4202

    R4257 W070 W085


    W054

    W077
    W037 W072 C646 W086
    C4245_1
    W040 R404 C650
    C4246_1 W061 W087
    W828

    W039 W868 C4237_1


    C4238_1
    W047
    CP302

    S809Y
    W050

    W056 C661_1
    W045

    C662_1 C660
    C4235_1 W101
    W108
    W846

    C401

    S803X
    W052

    C4228_1 C659

    W866
    C4227_1
    W168
    W831

    W096
    W095

    W114
    W113
    W112
    R406 W102
    W098

    S807Y

    W811
    C408

    W809
    R414
    C4207
    C4217 W103
    L4201

    W125
    C4234

    W122

    CP8001
    W111
    W110
    W827

    W169

    S805Y
    W119
    W118

    W116
    W115
    C4206 W104

    CP301
    W094

    W121
    W170 W834

    S806X
    C4214

    W124
    C313

    W106

    S805X
    C4232 R156

    CD3803
    W813 R4235 D117
    C347 C4230 R158 D103
    C302_1
    IC301

    R4234
    C4231 C4229 C115_1 SW3801
    W092

    C301_1 C121_1
    L101
    R318 CP803B_1 C131

    CD3802
    D105
    W093

    W097 CP802B W100


    R308

    S3801
    S3802
    R301 W099

    W801
    L801
    CMD006A

    C312_1

    D803
    R319

    D802
    D801
    R314
    C346 W107
    W091 Q806 Q804
    W826 W137 W155

    W109
    W146
    R323 W156

    W117

    IC101
    Q805 W138
    IC302

    D112 W861

    L102
    R820
    01

    C801
    W130

    W820
    J8
    W133

    R122

    W150
    X101
    C328 R805

    D3004

    W151
    W140

    W147
    W135

    D111
    C330 TP802

    CCD003A
    W134 W142

    CP806_1
    W154

    W144
    R810

    R126
    R808
    W139

    D104
    C139
    W132

    W131

    CP801
    W136
    W845 TP803

    R807
    C141_1

    D110
    TP801 W145 D113
    W129

    R802
    W825

    C122_1
    R4262

    W857
    W127
    C4259 R112

    W167

    W152
    R4244

    W867
    C4258

    W143
    R4241

    W148
    W149

    D101
    W869

    W
    R4261 SW2208

    OS101
    R

    SW2210

    SW2211
    SW2201

    SW2204
    SW2206
    SW2202

    SW2209
    J4203
    J4202

    J4205

    J4204
    SW2207

    F-3
    F-5
    R4210 R4253 R4242 R4245

    Q4201
    R4216
    R4247 C4205 C4203
    R4246 C4221
    C4224 C4215 R4255
    R4221 C4202

    R3816 R3815
    C4201 R4277 R136

    R4276
    C3823 R4250
    R137
    R135 R117

    C3816

    R3835
    C3811 C145

    R3834
    C3820 C3819
    C3812

    R3811
    R4227

    C143
    R4222

    R102
    R4225

    R3826

    C3830
    C3026
    C3003
    R3029

    Q3014
    Q3001
    R3003
    R3004

    R3031
    R157

    R3002 R3006

    Q3004
    R3030

    Q3012
    R3033

    Q3007
    Q3009

    R3015 R3026
    Q608

    R3032

    R3010
    C612
    R4256

    R3025
    R619

    C3014
    Q3006

    C3008
    R613

    R3023 C610
    C606
    R3017 R617
    R4254

    Q607 R648
    R621

    R614
    R3013 C611
    C622 R615

    IC3002
    C615 R620
    R3009 C618
    Q605

    R618 C616
    C3009 C3005 C619 C608
    C623
    R627 R622 R626 C625
    C3007 C627 R625
    R629 C626
    C630
    R628

    C629 R631
    Q609 IC4206
    SOLDER SIDE

    C637
    R634 C635
    C639 R645 C4255
    C4254 C638
    C644 C643
    C4253
    C645 R633
    C4281 C647
    IC4205

    C4279 R638 C648 R635


    IC4204

    R4207 R4206 C651 C649


    R4265

    C4244
    PRINTED CIRCUIT BOARDS

    C653 R639
    Q610

    C4241
    Q4213 Q4214
    R657
    R637

    R640 C654 R652


    Q4208

    R641 C655 R653


    C652
    Q4202

    C4276
    AV/CRT (CHIP MOUNTED PARTS)

    R642
    R4264

    C4270 C656 C665


    R4248

    C4273 C4269 C657


    R646

    R644
    Q606
    IC602

    C3022
    R4249

    R315
    C3023
    R4202
    R4201
    R4219

    C4212
    Q4210

    R4238 C4233 C4210R4218


    R4239 R4203 R4213 R4212 R4211 R4208
    R656

    R4236
    R4240 R4243 C4225 C4226 C3024
    W874
    R4223 R4224
    R4237
    C4222 C4220
    Q4211
    IC4201

    Q4209 Q4212
    Q4203

    W875
    R4229
    R4205

    R4228
    C4216 R4231
    R4233 R4232
    C306 C340 R4230 R101
    R127

    Q303
    R650

    C113 R108
    R345 R113 R111
    C105
    C116 C106
    C118 C112
    C111
    R316 C809 C114 C101
    C119
    R811
    C811 R155
    C337 R814 C102
    R813

    C810 R115
    R816

    R812 R128 C103


    R142
    IC199_1

    R815
    R658

    Q304

    C104
    R110

    R344 R147
    CMD006A

    C149
    R146 R116
    R131

    R346
    C309
    R143

    R145 R114 R124 C109


    R144 R134 R123
    R154 C108
    R141
    R140

    R133
    Q301

    R129 R148
    R139 R120
    C140
    Q102_1

    R151 R119
    R106

    R105
    Q101

    R109
    CCD003A

    C4275 C120
    R138
    IC102

    C4274
    Q103

    C4260 C4267
    C4261 R132
    C134

    R2204
    W872
    R2205
    R2206
    R2207
    R2202

    R2208

    R2201
    R2217

    F-6
    PRINTED CIRCUIT BOARDS

    LOADING MOTOR (INSERTED PARTS) LOADING MOTOR (CHIP MOUNTED PARTS)


    SOLDER SIDE SOLDER SIDE

    SW1
    CD2302

    SW
    SOLDER SIDE

    SW2

    D D0 0
    CD2301
    RE

    BLUE
    OR

    BL
    M2601 M2602

    F-7 F-8
    A B C D E F G H

    MPEG/MICON/DSP SCHEMATIC DIAGRAM


    8
    C4038

    0.01 B
    (DVD PCB) FROM/TO AUDIO/VIDEO
    8

    TRACK_DAC

    FOCUS_DAC

    DAC_VIDEO_D
    SLED_PWM

    DAC_VIDEO_C
    DAC_VIDEO_B

    DAC_VIDEO_A
    SYS_MUTE

    SPINDLE_PWM
    SPDL_SENS

    AAF_CE

    10K ADCIN_5
    10K ADCIN_6
    10K ADCIN_7
    AAF_TE
    VBIASS1
    VBIASS0

    AAF_FE

    LINK
    D4001 1SS355

    FNN
    DUPTD1

    FNP
    AAF_PI

    C4085 0.001 B
    RFA_SDEN
    MIRR

    100 RFA_DATA

    RFA_SCLK
    DEFECT

    RX
    JG064

    JG065
    JG027
    3.3 5.2

    C4086
    0.001 B
    JG001 UNREG+3.8V

    FPCSTRB JG028

    JG029
    LEVEL_CONVERT
    JG002

    R4011

    P.CON+3.3V
    Q4004 DAC_VIDEO_C

    4.7K
    JG003 2.9 DAC_VIDEO_B
    BOOT2 2SC30521

    100

    C4091
    FPCRX
    R4002 75 +-1%

    FPCCLK
    FPCTX

    100P CH
    C4088 DAC_VIDEO_D

    R4013
    IRRCV
    JG004

    R4017
    BOOT1

    47K
    +-1%
    0.01 B R4003 75 +-1% ASDATA0

    R4044
    R4043
    R4022

    47K
    JG005 DUPTD1 R4052 ABCLK

    R4001
    R4004 75 +-1%

    R4057

    R4056
    C4089 ALRCLK
    JG006 DUPRD1 4.7K AMCLK
    R4005 75 +-1%

    47P CH
    10P CH
    0.01 B

    C4043
    820

    C4042
    JG007 DUPTD0 MD
    R4051 C4090 MC
    JG008 DUPRD0 ML
    0.01 B GND
    4.7K
    JG009 P.CON+5V
    7
    R4039 P-H/I-L 7
    R4037

    4.7K

    6.3V 47 KA

    6.3V 47 KA

    6.3V 47 KA

    6.3V 47 KA

    47 KA
    R4050 RESET
    R4038 4.7K

    0.1 F
    0.1 F
    C4067_1

    C4069_1

    C4070_1

    C4071_1

    0.1 F
    0.1 F
    0.1 F
    C4068_1
    0.1 F
    8.2K

    0.1 F
    0.1 F

    0.1 F
    AFE GND

    C4006 0.1 F
    4.7K P.CON+A5V

    S GND
    P.CON+5V
    4.7K

    R4049
    R4036

    0.1 F

    0.1 F
    4.7K

    6.3V
    3.3K

    RFINN
    RFINP

    C4072
    C4073
    C4074
    C4075
    C4076
    C4007
    1K
    R4072

    C4004
    C4001
    4.7K

    C4005
    B4002
    R4046
    FCM2012H-102T04 B4003

    C4002

    C4003
    R4060

    R4061
    4.7K

    FPCSTRB
    B4001 FCM2012H-102T04

    IRRCV
    FROM/TO MEMORY FCM2012H-102T04 B4004 GND
    +1.8V GND
    B4005 FCM2012H-102T04
    +3.3V FROM/TO RF AMP
    GND TRAY_OPEN

    NC
    NC
    FCM2012H-102T04

    R4018
    NC

    0 NC

    4.7K
    P.CON+3.3V TRAY_CLOSE

    3.3
    3.3
    4.3
    0.7
    3.3
    3.3

    3.3

    3.3
    3.3

    2.9
    2.9
    1.8
    1.5

    0.7

    1.1
    1.7
    1.6
    1.8
    1.7

    1.6
    1.5
    1.7
    3.3

    1.2
    1.2
    3.3

    0.8
    3.3
    0.9

    1.2
    1.2
    1.1
    3.3
    1.2
    1.1
    HOME

    0
    0
    0

    0
    0

    0
    0

    0
    0
    0

    0
    6 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 SPDL_SENS 6

    GNDPWM
    VDDPWM
    3.3

    GNDDACDS

    GNDDACPS
    3.3

    GNDDACBS2
    DUPTD1

    GNDDACP
    VDDDACS
    PWMCO(6)
    PWMCO(5)

    PWMCO(4)

    PWMCO(3)
    PWMCO(2)

    PWMCO(1)

    PWMCO(0)
    PWMACT(1)
    PWMACT(0)
    GNDP

    GNDC
    TOUT_SW

    GNDAFES

    GNDAFERF

    105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156
    VDDP

    VDDC

    VDDAFES

    VDDAFERF

    RSET
    HA0 SSCRXD DUPTD1

    DEFECT

    VBIASS1
    VBIASS0

    RFINN
    RFINP
    52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

    DACDRIVE(1)

    DACDRIVE(0)

    C/B/U
    Y/R/V
    ADCIN(0)
    ADCIN(1)
    ADCIN(2)
    ADCIN(3)
    ADCIN(4)
    ADCIN(5)
    ADCIN(6)
    ADCIN(7)
    5.1

    ICGPCI/O(7)

    ICGPCI/O(6)
    HA1 3.3 DUPRD1 TIN_SW
    NC MEMCS(1) DUPRD1

    R4045
    HA2 C4008 3.3 3.3 C4033 0.1 F RFA_SDEN

    4.7K
    VDDP VDD-IP RFA_DATA
    HA3 HA15 0.1 F 3.0 3.3 DUPTD0
    HA4 MEMAD(15) DUPTD0 RFA_SCLK
    HA16 3.0 5.0 DUPRD0 AAF_CE
    HA5 MEMAD(16) DUPRD0
    HA6 HA14 3.0 0 C4032 0.001 B AAF_FE
    MEMAD(14) GNDP
    HA7 HA13 3.3 3.3 VR_SEL AAF_TE
    MEMAD(13) IDGPCI/O(3) AAF_PI
    HA8 HA12 3.3 0 TRAY_OPEN
    HA9 MEMAD(12) 208 SSCTXD 160 VDDDAC GPCI/O(34) VR_SEL
    HD15 0 3.3 TOUT_SW FNN
    HA10 MEMDA(15) ICGPCI/O(5)
    HA11 0.5 207 SSCCLK 159 CVBS/C 0 TRAY_CLOSE FNP
    HA11 MEMAD(11) GPCI/O(33)
    HA12 HD7 2.6 0 C4096 0.001 B TIN_SW P-H/I-L VBIASS0
    MEMDA(7) 206 SPINDLEPULSE 158 CVBS/G/Y ICGPCI/O(4)
    HA13 3.1 VBIASS1
    0 SMUTE
    HA14 GNDP 205 SLEDPULSE 157 GNDDACD GPCI/O(32) DEFECT
    HA10 0 3.3 C4027 0.1 F LINK

    C4079 100P CH
    HA15 MEMAD(10) VDDP
    HA16 HD14 1.9 0 C4034 5P CH MIRR
    MEMDA(14) GCLKA
    HA17 0 0 27MHz LDON

    R4012
    5 HA9 1 5
    MEMAD(9) GCLKP

    1M
    HA18 0 0 R4042 X4001 SMUTE
    HD6
    HA19 MEMDA(6) XO 100BT02701 C4035 16P CH R4016 TRACK_DAC
    HA8 0 1.8 100 RESET FOCUS_DAC
    HA20 MEMAD(8) VDDA C4028 0.1 F
    HD0 HD13 2.1 3.3 100 SPINDLE_PWM
    MEMDA(13) RESET#
    HD1 HD5 2.0 0 C4081 0.1 F SLED_PWM
    MEMDA(5) GNDA
    HD2 HA20 0 3.3 HOME HOME
    HD3 MEMAD(20) IDGPCI/O(2)
    C4010 3.3 3.3 LDON P.CON+A5V
    HD4 VDDP GPCI/O(31)
    HD5 HD12 0.1 F 0.6 3.3 P.CON+3.3V L4002
    MEMDA(12) VID(0)
    HD6 WR 3.3 3.3 DJTDO R4019 33 ML VCC+9V
    MEMWR# VID(1) P.CON+5V
    HD7 HD4 2.6 0 DJTDI R4020 33 TP4004 MC
    MEMDA(4) VID(2) ADCIN_7 W5T29X7.5X19
    HD8 1.8 0 R4021 33
    C4013 DJTMS TP4006 MD ADCIN_6
    HD9 VDDC VID(3)
    HD11 0.1 F 2.7 0 ICETCK R4069 4.7K TP4005 ADCIN_5
    HD10 MEMDA(11) MPEG/MICON/DSP IC V SW TP4008
    HD11 HD3 2.9 3.3 ICETDO TP4007
    MEMDA(3) IC4001 D1 2
    HD12 HA19 0 3.3 ICETDI M_GND
    MEMAD(19) ZR36762PQCG_V D1 1 D
    HD13 0 3.3 GND FROM/TO REGULATOR
    SYS_MUTE TP4009
    HD14 GNDC VID(7) GND

    C4097 0.01 B
    0.5 3.3 C4029 0.1 F R4031 4.7K

    C4036 0.1 B
    6.3V 47 KA
    HD10 TP4010 I2CCLK

    C4092 100P CH
    4 HD15 MEMDA(10) VDDP 4

    C4084_1

    C4065 0.01 B
    HA18 0 3.3 I2CDAT R4035 4.7K DVD COMBO 220mm
    MEMAD(18) STBY-L (CP8001)
    MEMCS0 0 0 JG018 CD4002
    RD GNDP GNDP CU2B2201
    HD2 0.6 3.3 I2CDAT JG015
    WR MEMDA(2) HSYNC
    GND 1

    100P CH
    HA17 0 1.6 C4030 0.1 F 3.2 3.2 0 3.3

    C4093

    IC4002 BR24L02F-WE2
    SD_A0 MEMAD(17) VDDC
    0.6 3.3 5 6 7 8
    SD_A1 HD9 I2CCLK GND 2
    MEMDA(9) VSYNC
    SD_A2 HA7 2.7 0 SDA SCL WP VCC DUPRD1

    10P CH
    MEMAD(7) GNDC TX 3
    SD_A3

    C4098
    HD1 2.7 3.3 R4024 RX JG059

    C4094 100P CH
    SD_A4 MEMDA(1) AIN RX 4

    C4037
    0.6 3.3

    0.1 F
    SD_A5 HA6 4.7K C4031 0.01 B M_GND JG012

    EEPROM IC
    MEMAD(6) VDDP-A2 GND 5
    SD_A6 HD8 0.4 1.7 IAMCLK R4025 220 AMCLK
    MEMDA(8) AMCLK VCC+9V JG017
    SD_A7 HA5 5.5 100 RAMDAT(14) 0 P.CON+9V 6
    MEMAD(5) GNDP-A2 GND NC NC NC L4001
    SD_A8 3.3 1.7 P.CON+A5V JG014
    C4014 53 RAMADD(4) 101 GNDP IABCLK R4026 220 ABCLK P.CON+A5V 7
    SD_A9 VDDP ABCLK 4 3 2 1 C4066 JG010

    0.01 B
    P.CON+5V 2.2uH

    C4080
    SD_A10 HD0 0.1 F 0.4 1.6 IALRCLK R4027 220 ALRCLK 0 0 0 0 (P.CON+3.3V)
    8
    MEMDA(0) 54 RAMADD(3) 102 RAMDAT(1) ALRCLK
    SD_A11 HA4 3.3 0 STBY_L JG066 0305 1 B (P.CON+3.3V)
    MEMAD(4) GPAI/O NC 9
    SD_D0 RD 0 55 RAMADD(5) 103 RAMDAT(15) 0 R4058 220 ASDATA0 JG011
    SD_D1 MEMRD# AOUT(0) GND 10
    3 SD_D2
    HA3 0
    MEMAD(3) 56 RAMADD(2) 104 RAMDAT(0) AOUT(1)
    0 ASDATA1 TP4015 SPDIF JG016 3
    HA2 0 0 SPDIF 11
    RAMCS(0)# RAMBA(1)

    SD_D3 ASDATA2 TP4016


    MEMAD(2) AOUT(2) R4071
    SD_D4 MEMCS0 3.1 1.6 B4010 SPDIF 2
    MEMCS(0)# SPDIF
    SD_D5 HA1 3.1 0 NC FCM2012H-102T04
    MEMAD(1) IDGPCI/O(0) 150
    SD_D6
    RAMADD(10)

    RAMADD(11)

    RAMDAAT(3)

    SIP1117L-ADJ-TP
    3.2 0
    RAMDAT(10)

    RAMDAT(11)

    RAMDAT(12)

    RAMDAT(13)
    HA0
    RAMADD(6)

    RAMADD(1)
    RAMADD(7)
    RAMADD(0)

    RAMADD(8)

    RAMADD(9)

    RAMDAT(8)

    RAMDAT(7)
    RAMDAT(9)
    RAMDAT(6)

    RAMDAT(5)

    RAMDAT(4)

    RAMDAT(2)
    RAMCS(1)#

    SD_D7 MEMAD(0) ICGPCI/O(0) NC


    RAMBA(0)

    RAMRAS#
    RAMCAS#

    GNDPCLK

    0 0
    RAMDQM

    VDDPCLK
    RAMWE#

    SD_D8

    REG+1.9V IC
    GNDP GNDP
    R4053

    SD_D9 C4016 0.1 F 3.3 0 R4014 4.7K


    GNDP

    GNDC

    GNDP

    GNDP

    GNDP

    GNDC
    VDDP

    VDDC

    VDDP

    VDDP

    VDDP

    VDDC

    VDDP
    PCLK
    1K

    VDD-IP GPCI/O(20)
    SD_D10 C4017 0.1 F 3.3 3.3 C4026 0.1 F

    IC4006
    SD_D11 VDDP VDDP VIN VOUT ADJ
    R4054

    SD_D12 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 3 2 1


    1K

    SD_D13
    0

    0
    0

    JG050
    0.9
    0.3
    1.0

    1.0
    3.3

    1.0
    0.2

    0.2
    1.8
    1.9

    0.2
    3.3

    3.1
    0.5

    3.1
    0.2
    3.2
    3.3
    3.2

    1.6
    3.3
    2.1

    1.3
    0.8
    0.8
    3.3
    1.7
    1.3
    0.5

    0.9
    1.8
    1.4

    0.5
    3.3
    2.0
    0.4
    1.5

    0.8
    1.2
    1.5
    SD_D14 3.8 1.9 2.0
    P.CON+3.3V W821 UNREG+3.8V
    SD_D15 B4006
    RAMCS0#
    W823
    0.1 F

    RAMCS1# FCM2012H-102T04
    0.1 F

    0.1 F
    0.1 F

    0.1 F

    0.1 F

    R4033
    100

    0.1 F

    RAMRAS#
    47

    47
    6.3V 100 KA

    6.3V 100 KA

    56 +-1% 18
    RAMCAS# UNREG+3.8V
    C4078_1

    JG051

    C4083_1
    C4077

    0.1 F

    C4082

    100 KA
    2 2

    F
    SD_BA0

    100 KA
    C4011_1
    C4018

    C4019

    C4020

    C4024

    C4025

    RAMDQM
    R4059

    R4008
    C4022

    C4023
    R4064

    R4032
    0.1

    C4053_1
    RAMWE#

    F
    C4052
    RAMCLK

    0.1
    6.3V

    6.3V

    +-1%
    C4012

    0.1 F

    R4034
    4D03WGJ0470T5E

    R4068
    4D03WGJ0470T5E
    4D03WGJ0470T5E

    4D03WGJ0470T5E

    4D03WGJ0470T5E

    4D03WGJ0470T5E

    4D03WGJ0470T5E
    4D03WGJ0470T5E

    39
    47
    47 NR4001

    47 NR4002

    47 NR4003

    47 NR4006

    47 NR4007
    47 NR4004

    RAMCAS#
    47 NR4005

    47 NR4008
    RAMDQM
    RAMRAS#
    RAMCS0#

    RAMCS1#

    RAMWE#

    TP4003 PCB130
    RAMCLK

    SD_D10

    SD_D11

    SD_D12

    SD_D13

    SD_D14

    SD_D15
    SD_A10

    SD_A11

    SD_D0
    SD_A4
    SD_A3
    SD_A5
    SD_A2

    SD_A6
    SD_A1
    SD_A7
    SD_A0

    SD_D6

    SD_D5

    SD_D4

    SD_D3

    SD_D2

    SD_D1
    SD_BA0
    SD_A8

    SD_A9

    SD_D7
    SD_D9

    SD_D8

    DMD008A

    1 NOTE:THE DC VOLTAGE EACH PART WAS NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME 1
    DIGITAL AUDIO SIGNAL(PB) MEASURED WITH THE DIGITAL TESTER OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE
    DURING PLAYBACK.

    A B C D E F G H
    G-1 G-2
    A B C D E F G H

    8
    MEMORY SCHEMATIC DIAGRAM 8

    (DVD PCB)

    FROM/TO MPEG/MICON/DSP FLASH IC 8M


    IC4007 SST39VF800A-70-4C-EKE
    SD_A0
    SD_A1 HA16 1.2 1.7 HA15

    48
    A16 A15

    1
    SD_A2
    SD_A3
    SD_A4 C4064 3.3 1.0 HA14
    7 7

    47
    VCCQ A14

    2
    SD_A5
    SD_A6 0.1 F 64M SDRAM IC
    SD_A7 0 0.8 HA13 IC4005 K4S641632H-UC75

    46
    VSS A13

    3
    SD_A8
    SD_A9 0 3.3

    54
    VSS VDD

    1
    SD_A10 HD15 0.7 1.5 HA12

    45
    DQ15 A12

    4
    SD_A11 SD_D15 1.2 1.5 SD_D0

    53
    DQ15 DQ0

    2
    SD_D0
    SD_D1 1.9 2.5 0 3.3 C4050
    HD7 HA11

    44

    52
    DQ7 A11 VSSQ VDDQ

    3
    SD_D2
    SD_D3 1.5 0.8 0.1 F
    SD_D14 SD_D1

    51
    DQ14 DQ1

    4
    SD_D4 HD14 1.3 1.3 HA10

    43
    DQ14 A10

    6
    SD_D5 SD_D13 2.0 0.4 SD_D2

    50
    DQ13 DQ2

    5
    SD_D6
    SD_D7 1.2 1.6 C4040 3.3 0
    HD6 HA9

    42

    49
    DQ6 A9 VDDQ VSSQ

    6
    SD_D8
    SD_D9 0.1 F 0.4 0.5
    SD_D12 SD_D3

    48
    DQ12 DQ3

    7
    SD_D10 HD13 0.6 1.5 HA8

    41
    DQ13 A8

    8
    6 SD_D11 SD_D11 0.5 0.9 SD_D4 6

    47
    DQ11 DQ4

    8
    SD_D12
    0 C4045
    SD_D13 HD5 0.7 HA19 0 3.3

    40

    46
    DQ5 A19 VSSQ VDDQ

    9
    SD_D14
    SD_D15 1.7 1.3 0.1 F
    0 SD_D10 SD_D5

    45

    10
    RAMCS0# 0.8 DQ10 DQ5
    HD12 HA20

    39

    10
    RAMCS1# DQ12 A20 0.8 0.8
    SD_D9 SD_D6

    44

    11
    RAMRAS# DQ9 DQ6
    RAMCAS# 1.6 3.3 C4041 3.3 0
    HD4 WR

    38

    11

    43

    12
    SD_BA0 DQ4 WE# VDDQ VSSQ
    RAMDQM 0.1 F 2.1 1.3
    C4062 SD_D8 SD_D7

    13
    42
    RAMWE# 3.3 0 DQ8 DQ7
    RESET

    37

    12
    RAMCLK VDD RP# 0 3.3 C4046
    0.1 F

    14
    41
    HA0 VSS VDD
    0.1 C4039 0 0.1 F
    HA1 HD11 1.6 0 RAMDQM

    36

    13

    15
    40
    HA2 DQ11 VPP NC NC LDQM
    HA3 0.1 F 0 3.2
    0.1 RAMDQM RAMWE#

    16
    39
    HA4 1.6 R4041 UDQM WE
    HD3

    35

    14
    HA5 DQ3 WP# 1.5 3.2
    5 RAMCLK RAMCAS# 5

    17
    38
    HA6 4.7K CLK CAS
    HA7 1.3 0 R4048 3.3 0.2
    HD10 HA19 3 RAMRAS#

    34

    15

    18
    37
    HA8 DQ10 A19 CKE RAS
    HA9 47K 0 3.1 RAMCS1#

    19
    36
    HA10 1.2 1.6 NC NC CS
    HD2 HA18

    33

    16
    HA11 DQ2 A18 0 0.5
    SD_A11 SD_BA0

    35

    20
    HA12 A11 BA0
    HA13 HD9 1.4 0.7 HA17 SD_A9 0.2 3.1 RAMCS0#

    32

    17

    34

    21
    HA14 DQ9 A17 A9 BA1
    HA15 SD_A8 0.2 1.9 SD_A10

    33

    22
    HA16 1.4 1.4 A8 A10/AP
    HD1 HA7

    31

    18
    HA17 DQ1 A7 1.0 0.2
    SD_A7 SD_A0

    32

    23
    HA18 A7 A0
    HA19 HD8 0.9 1.6 HA6 SD_A6 1.0 0 SD_A1

    30

    19

    31

    24
    HA20 DQ8 A6 A6 A1
    HD0 SD_A5 1.0 0 SD_A2

    30

    25
    HD1 1.6 1.6 A5 A2
    HD0 HA5

    29

    20
    HD2 DQ0 A5 0.9 0.3
    SD_A4 SD_A3

    29

    26
    HD3 A4 A3
    4 C4047 4
    HD4 RD 2.6 1.3 HA4 0 3.3

    28

    21

    28

    27
    HD5 DE# A4 VSS VDD
    HD6 0.1 F
    HD7 0 1.7 HA3
    27

    22
    HD8 VSS A3
    HD9
    HD10 MEMCS0 W854 2.6 2.5 HA2
    26

    23
    HD11 CE# A2
    HD12
    HD13 HA0 2.5 1.6 HA1
    25

    24
    HD14 A0 A1
    R4040

    HD15
    4.7K

    MEMCS0 B4007
    RD
    WR FCM2012H-102T04
    B4008
    P.CON+3.3V
    3 3

    6.3V 220 KA
    6.3V 220 KA

    FCM2012H-102T04
    C4063_1

    C4021_1
    C4095

    0.01 B
    C4099

    0.01 B

    GND

    FROM AUDIO/VIDEO

    RESET

    2 2

    PCB130
    DMD008A

    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE EACH PART WAS
    1 OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE MEASURED WITH THE DIGITAL TESTER 1
    DURING PLAYBACK.

    A B C D E F G H
    G-3 G-4
    A B C D E F G H

    RF AMP SCHEMATIC DIAGRAM


    8 (DVD PCB) 8
    FROM/TO MPEG/MICON/DSP

    VR_DVD

    P.CON+5V
    VR_CD

    VR_SEL

    FNN
    FNP
    TOUT_SW
    DM3
    TIN_SW
    RFA_SDEN
    5 RFA_DATA
    RFA_SCLK

    R2619

    R2621
    100

    100
    AAF_CE

    R2622

    R2624
    4.7K
    AAF_FE

    4.7K
    FROM/TO LODER

    F
    F
    D 0

    C2626
    AAF_TE

    C2632
    R2620

    0.1
    G AAF_PI

    0.1
    VR DVD CTL
    CP2601 0.7 4.7K 0.5 VR_SEL
    Q2603 D
    09-5000-024-001-006 FNN
    2SK3018 S 0 G
    R2647
    TR- FNP
    1 T- VR CD CTL
    0 4.7K D 0 JG023 JG024 VBIASS0
    7 2 T+
    TR+ Q2604 S VR SEL CTL R2623 7
    2SK3018 G 0.7 VBIASS1

    0.033 B
    FO- 0 FNN DEFECT

    C2627
    3 F- Q2605

    0.001 B
    C2633
    4.7K JG061 LINK
    FO+ 2SK3018 S 0
    4 F+ FNP MIRR

    0.001 B
    DVDPD LDON

    C2625 0.001 B
    JG021 TP4

    C2628
    5 MON(DVD) JG055

    +-1%
    C2635 TP6 HOME
    RF GND

    R2614
    OPU_RF
    6 NC(SW) NC GND
    TP10 JG062 W806

    B
    VR_DVD 0.001 B GND

    0.001 B
    7 VOL(DVD) 4 GND

    C2624

    C2629

    12K

    6.3V 47 KA
    C2646_1
    0.001
    8 GND(DVD) JG056 TP5

    RFAC

    F
    C2647
    DVDLD DVD/CD
    9 LD(DVD)

    0.1
    CDLD 1.5 0 3.1 3.1 4.3 4.3 5.1 2.4 2.6 3.5 3.5 2.3 0 0 0 0 B2605 P.CON+5V
    10 LD(CD) RF_A5V
    VR_CD 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 P.CON+A5V

    47 KA

    47 KA
    F
    11 VOL(CD) TP15

    C2642

    C2643_1

    C2644_1
    FCM2012H-102T04

    MEV
    ATON

    VNA
    RFDC

    ATOP

    VPA

    BYP

    RX
    RFAC

    FNN
    FNP
    DIN
    RFSIN
    0 0

    AIN

    DIP
    AIP
    GND RFA_SDEN

    0.1
    48
    12 GND(CD)

    1
    NC
    CDPD R2611 TP16 P.CON+3.3V
    13 MON(COM)

    6.3V

    C2645 6.3V
    0 1.5 4.7K RFA_DATA

    47
    DVD/CD DVDRFN

    2
    6 14 DVD/CD NC SDATA 6
    R2612 TP17

    0.1 F
    OPU_RF 2.5 3.3
    15 RF C2603 1 DVDRFP 4.7K RFA_SCLK

    46
    A2 SCLK

    3
    OPU_C 48 SDEN B2604
    16 C 0.0022 B R2613 TP18

    R2336
    FCM2012H-102T04

    4.7K
    OPU_B C2604 0 3.3 4.7K

    45
    17 B B2 V33

    4
    OPU_A 0.0022 B B2603
    18 A 2.5 4.2 C2616
    C2605

    44
    OPU_D C2 LCP

    5
    19 D C2654 FCM2012H-102T04
    0.0022 B 470P CH
    OPU_F 2.5 4.1 0.01 B
    20 F C2606 SMUTE

    43
    D2 LCN

    R2310_1
    OPU_E R2644 R2306_1

    5.6K
    +-1%
    21 E 0.0022 B TRACK_DAC

    R2313_1 R2314_1
    R2643

    C2304 +-1%
    3.7 0 2.2K

    5.6K +-1% 5.6K


    C2607 5.6K +-1%

    42
    22 VCC CP MNTR

    7
    C2619 FOCUS_DAC
    OPU_VREF 33P CH 1K

    +-1%
    23 Vref 3.7 1.8 560P CH SPINDLE_PWM

    220P CH

    R2318_1
    C2634 READ CHANNEL IC AAF_CE

    41
    CN CE

    R2312_1
    24 GND(PDIC) NC C2620 SLED_PWM

    +-1%
    TP19 IC2601

    5.6K
    0.1 F 2.7 1.7 R2607
    OPU_D ZR36708TQC 0.0056 B AAF_FE ADCIN_7

    5.6K
    40
    D FE
    9
    C2648
    TP20 1.2K C2621
    5 1.8 R2608
    ADCIN_5 5

    220P CH
    OPU_C 2.7 0.0056 B AAF_TE R2320
    0.1 F MOT_SPDL+

    0.001 B
    10

    39
    C TE

    C2305

    0.001 B
    ADCIN_6

    C2309
    C2622

    C2312
    TP21 1.2K R2322 4.7K R2335
    2.7 1.6 R2609 MOT_SPDL- VCC+9V
    OPU_B 0.0056 B AAF_PI
    11

    38
    CP2602 JG063 JG052 B PI
    C2623 4.7K 1.5K
    00_6232_005_006_800+ TP22 1.2K M_GND

    TP45
    MOT_LD- OPU_A 2.6 3.3 0.1 F
    12

    37
    5 LD- A V25 SPDL_SENS
    16 CD_A 33 LINK R2605 R2610
    MOT_LD+ TP26

    R2334
    4 LD+

    10K
    R2653 2.7 1.7 10K +-1% 5.1K +-1% VBIASS0 TP1
    13

    36
    TOUT_SW CD_D V125

    W864
    R2308
    3 OPEN C2618 TRAY_CLOSE

    R2301 10K

    W863
    100 C2617 R2315
    2 GND(D) 2.7 0 TP38
    0.1 B TP2
    14

    35
    R2652 CD_C TPH VBIASS1

    R2324
    TIN_SW 10K

    1K
    470 +-1%
    1 CLOSE 0.1 B TRAY_OPEN

    TP46
    TP35

    R2316
    1K

    R2319
    R2309

    1.5K

    27K
    100 2.7 3.3 DEFECT
    15

    34
    CD_B DFT R2317

    R2307
    R2651

    C2615 0.1 F
    R2650

    27K
    4.7K

    4.7K

    DVDPD
    TP33
    DVDLD

    JG054 R2645

    MEVO
    CDPD

    LDON
    CDLD

    MIRR

    MLPF
    2.6 0
    CD_E
    CD_F

    LINK 22K
    16

    33
    VNB
    VPB

    MIN
    JG053

    MP

    MB
    VC

    763WSA0026
    1K R2646

    1M R2321

    R2326
    TP140 3.9K
    P.CON+3.3V

    TP139 27K

    R2327
    TP138
    4 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 4

    HS2301

    4.7K
    HS76
    2.2K

    R2305
    27K

    R2339
    2.6 2.6 5.1 5.1 3.7 5.1 0.2 0.2 0 3.3 0 2.7 2.2 2.3 2.9 0.2 R2602
    C2655

    220P CH
    R2338

    0.0068 B
    R2601

    0.033 B
    1.8M
    R2635

    0.01 B

    B
    4.7K

    27K +-1%
    12K

    +-1%
    4.7K

    C2610

    C2612

    C2613

    C2614
    100P CH

    R2604
    R2603
    0.1
    100P CH

    NC NC NC
    100P CH C2658

    TP27

    TP28

    TP34

    TP29

    TP30

    TP31

    TP25

    TP37

    TP36 0 4.0 2.6 2.6 1.5 1.5 1.5 1.5 0 0 1.0 2.5 4.2 0 1.5 1.5 1.7 1.5 1.5
    C2660

    13K
    36 35 34 33 32 31 30 29 28 38 27 26 25 24 23 22 21 20 19
    R2648

    LA6565-TE-L-E

    MUTE1
    VCONT

    VREF-OUT
    MUTE234
    S-GND

    VIN2+
    REG-OUT

    VIN+OP

    VO_OP
    VIN4-

    VIN2-
    VIN-OP

    VIN3-
    VREF-IN
    VIN4

    VIN3

    VIN2
    REG-IN
    C2657

    R2337
    100P CH

    13K

    10K
    6.3V 47 KA
    C2659

    CP2603
    C2608_1

    OPU_VREF
    0.1 F

    F
    LDON

    MIRR
    DVDPD
    C2609

    CDPD

    C2611
    OPU_F

    00_6232_006_006_800+

    MOTOR DRIVE IC
    OPU_E

    TP2601
    0.1

    6 SW(GND)

    R2330
    R2649 GND

    1K
    LIMIT SW HOME
    5

    VIN1+A

    VIN1-A
    VCCS

    VIN 1
    VCC2

    VLD+

    VD4+

    VD3+

    VD2+

    VD1+

    VCC1
    VLD-

    VD4-

    VD3-

    VD2-

    VD1-
    100 MOT_SLED-

    FWD

    REV
    4 SLD-

    IC2301
    3 3

    TP141
    MOT_SLED+

    TP24
    3 SLD+
    MOT_SPDL- 1 2 3 4 5 6 7 8 9 37 10 11 12 13 14 15 16 17 18
    2 SP1-
    MOT_SPDL+ JG019 0 0 8.8 0.8 0.9 4.1 4.1 4.1 4.1 0 5.1 3.0 4.0 4.1 8.8 8.8 1.5 1.5 1.5 R2325
    1 SP1+ JG022
    3.3K

    TP64

    TP65

    TP69

    TP68

    TP56

    TP55

    TP66
    R2615 R2328
    DVD LD CTL
    4.5 10

    470 +-1%
    Q2601 C2313 4.7K

    KA

    10V 100 KA
    R2616

    C2301

    C2306 0.1 F
    F
    2SA1036K 3.9

    R2331
    C2310_1

    C2311

    B
    TP40

    0.1
    0.1 B

    0.1
    10V 100
    1K
    B2601 1.0
    DVDLD

    C2314_1
    FCM2012H-102T04 D2601
    F

    KDS120RTK
    C2636

    C2638

    C2640_1
    0.1

    0.1

    2
    2

    6.3V 100 KA 2
    F

    1
    F

    C2302 0.1 B
    C2639
    C2637

    0.1

    C2307 0.1 B
    0.1

    R2303 2.2
    B2602
    CDLD
    C2641_1 C2303 0.1 B C2308 0.1 B
    FCM2012H-102T04 JG057
    R2304 2.2

    R2323

    R2329
    1.0 6.3V 100 KA

    1.2

    1.2
    3.9 R2617
    CD LD CTL JG058
    Q2602 1K
    2SA2048 4.5
    PCB130

    MOT_SPDL+
    R2618

    MOT_SPDL-

    MOT_SLED-

    MOT_SLED+
    TP42 DMD008A

    MOT_LD-

    MOT_LD+
    10
    JG020
    GND

    TR+

    FO+
    TR-

    FO-
    1 1
    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE EACH PART WAS
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE MEASURED WITH THE DIGITAL TESTER
    DURING PLAYBACK.

    A B C D E F G H
    G-5 G-6
    A B C D E F G H

    AUDIO/VIDEO SCHEMATIC DIAGRAM


    8 (DVD PCB) 8
    P.CON+A5V

    R8118

    470 R8119

    470 R8120
    470

    470

    470
    R8107

    R8108

    R8109

    470
    DAC_C_VIDEO

    10
    DAC_B_VIDEO
    7 7
    FROM/TO MPEG/MICON/DSP 9
    DAC_D_DVD_VIDEO

    P.CON+A5V
    1.4
    8 1 2 3 4
    C8105
    DAC_VIDEO_C
    DAC_VIDEO_C 0.6
    A Y G CVBS Y
    DAC_VIDEO_B 12P CH VIDEO_BUFFER
    Q8102 0

    150P CH

    150P CH
    DAC_VIDEO_D L8102
    2SA1530A1 B V R Y V

    C8104

    C8106
    P.CON+5V
    1uH 0305
    VIDEO_BUFFER
    C U B C U
    Q8103 1.3
    RESET DAC_VIDEO_B
    C8108 2SA1530A1 D C CVBS CVBS CVBS
    MC 0.5
    12P CH 0
    MD

    150P CH

    150P CH
    L8103
    6 6

    C8107

    C8109
    ML
    AMCLK
    1uH 0305
    ABCLK
    ALRCLK 1.3
    ASDATA0 C8111 0.5
    DAC_VIDEO_D
    P-H/I-L
    12P CH VIDEO_BUFFER
    0
    L8104

    150P CH

    150P CH
    Q8104

    C8110

    C8112
    2SA1530A1
    1uH 0305
    SYS_MUTE
    GND
    FROM/TO REGULATOR
    P-H/I-L JG025 JG013
    DVD COMBO 180mm
    JG026
    5 NC DVD COMBO/W COMBO 5
    JG030
    NC CP8101_3 (CP8002)
    JG033
    NC IMSA-9604S-12Z13
    GND W825
    (GND) 12
    RESET JG031 W826
    DVD RESET 11
    ZERO D8111 1SS355 JG036
    ZERO 10
    JG034
    AUDIO-R 9
    R_AUDIO W824
    GND 8 FFC(1mmP)
    L_AUDIO JG035
    AUDIO-L 7
    JG048 JG037 CD8101
    6.3V 100 KA

    GND 6
    2F0C1602
    C8119_1

    DAC_B_VIDEO JG042
    FROM/TO MEMORY Y 5
    C8120

    4
    0.1

    GND
    RESET JG040

    R8114

    R8115
    DAC_C_VIDEO
    C 3

    100K

    100K
    4 B8103 4
    GND 2
    DAC_D_DVD_VIDEO JG038
    FCM2012H-102T04 CVBS 1
    C8114 R8113
    D8112

    0.001 B
    C8122
    1 B SYS_MUTE
    470 6
    C8125 1SS355

    1 B
    C8113 R8112

    1 B 470 7
    C8126

    1 B

    3 3
    NC
    2.4 2.5 4.9 3.3 0 1.6 1.1 1.6
    8 7 6 5 4 3 2 1
    IC8102 PCM1753DBQR

    DGND
    VOUTR

    VDD
    VOUTL

    LRCK

    DATA
    ZEROR/ZEROA VCC

    BCK
    STEREO DAC IC

    ZEROL/NA
    VCOM
    AGND

    SCK
    MD

    MC

    ML

    9 10 11 12 13 14 15 16
    0 2.4 3.3 0 0 0 3.3 1.7
    NC

    2 2
    25V 10 KA
    C8121_1

    ASDATA0

    ALRCLK
    AMCLK

    ABCLK
    ZERO

    MD

    MC

    ML

    PCB130
    DMD008A

    PLAYBACK COLOR SIGNAL COMPONENT SIGNAL(U) NOTE:THE DC VOLTAGE EACH PART WAS NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME
    1 PLAYBACK LUMINANCE SIGNAL MEASURED WITH THE DIGITAL TESTER OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE 1
    PLAYBACK VIDEO SIGNAL COMPONENT SIGNAL(V) DURING PLAYBACK.
    G.SIGNAL AUDIO SIGNAL(PB)
    B.SIGNAL
    A B C D E F G H
    G-7 G-8
    A B C D E F G H

    REGULATOR SCHEMATIC DIAGRAM


    8
    (AV PCB) 8

    UNREG+5V

    UNREG+8V
    UNREG+12V
    AT+5.7V
    W870 P.CON+3.3V
    R3035
    7 7
    12 1W L3001_1
    P.CON+9V
    22uH
    DVD 5V REG
    DVD 3.3V REG
    Q3008
    Q3003
    KTB1151
    KTB1366
    P.CON+5V_A
    R3001 4.9 3.8 7.9 5.3 A9V REG

    100K
    R3029
    4.3 DVD 9V REG 7.3 Q3010
    FROM POWER 47K 1/4W
    Q3005
    6V REGULATOR IC 2SB1131
    KTB1366
    P.CON+A9V
    IC3001 KIA78R06API
    UNREG+5V 12.0 9.3 12.0 8.1
    UNREG+5V

    100K
    R3030

    R3031

    R3032

    100K
    11.4 11.4

    100K
    UNREG+12V
    UNREG+12V
    UNREG+8V
    UNREG+8V
    6 6
    GND
    IN OUT GND SW

    1000 YK

    16V 220 YK
    470 YK
    470 YK
    1/4W
    25V 100 YK

    16V 220 YK
    220 YK
    4.7K 1/4W

    1/4W

    1/4W
    100 1/4W

    10K 1/4W

    1/4W
    220 1/4W

    C3006

    C3010

    C3011

    C3021

    C3020

    C3012

    C3013
    1 2 3 4

    R3021
    R3005

    R3007

    R3012

    R3014

    R3019

    R3022

    R3024
    7.9 6.0 0 7.9

    330

    10K
    100

    6.3V
    6.8K

    6.3V
    TO AUDIO SW

    6.3V
    16V
    W809 C3007
    TX
    GND

    0.0022 B
    C3027
    0.1 F VOLT CURRENT CONTROL IC
    IC3002 LA6324NML-TE-L CURRENT P.CON+12V
    CURRENT
    CONTROL
    D3009 CONTROL 3.9 0.7 0.6
    7.3
    R3006 R3016 0.6 Q3007
    Q3004

    0.001 B

    0.001 B
    14
    2SC3052-T1

    1
    21DQ09N 2SC3052-T1

    C3005

    C3009
    0.6 330 1K 1/4W
    W811 RX 0
    0 3.6 5.3
    VOLTAGE

    13
    2
    5 Q3002 5
    KTA1266 TO CHROMA/SIF/VIF/21PIN
    R3009 3.6 5.3

    12
    3
    6.0 6.0 PROTECTER
    22K +-1% DVD_Y
    FROM/TO MPEG/MICON Q3014 12.0 0
    5.4
    16V 220 YK

    10V 220 YK

    11
    DVD_CVBS

    4
    RT1N241C-T1
    7.9 DVD_C
    CP8001 (CD4002) R3017 6.0 5.7 R3018
    0.6

    10
    A2001WV2-11P P.CON+5V

    5
    C3022
    10K 10K 1/4W
    1 GND 0 6.1 5.7 P.CON+A9V
    R3003

    B
    100P CH

    0.001 B
    2 GND GND

    9
    C3001

    C3002

    C3008

    C3014
    0.001
    100K 11.2
    3 TX 11.1 0.6 0.6 P.CON+5V SW
    C3023 0.6 R3011 R3020 0.6
    4 RX Q3011

    8
    1N4005-EIC

    100P CH 680 1/4W 1K 1/4W CURRENT KTC3209_Y


    D3001

    R3004

    5 GND CURRENT 0 0 P.CON+5V


    CONTROL
    1K

    D3005

    D3006

    D3008
    1SS133

    1SS133

    1SS133
    P.CON+9V CONTROL 5.7 5.7
    6 P.CON+9V Q3009
    D3012 Q3006
    4 P.CON+5V_A 2SC3052-T1 6.4 4
    7 P.CON+5V A 0.1 2SC3052-T1
    R3002

    100K

    1N4005-EIC P.CON+3.3V
    8 P.CON+3.3V 0.7 R3010
    C3024 DVD_POWER_H
    9 P.CON+3.3V
    1K

    27K +-1%
    0.1 F 0
    10 GND

    R3013
    6.3V 47 KA

    6.3V 470 YK
    SPDIF-134

    1/4W
    11 SPDIF DVD POWER
    C3004

    C3015
    C3003

    C3026

    R3015

    R3025

    R3026

    R3027
    1 F

    CONTROL

    10K

    10K
    47K
    HS3001
    HS3002 Q3001
    1

    330
    763WAA0184

    R3023
    763WAA0186

    10K
    2SC3052-T1

    FROM/TO MICON/TUNER
    S807Y
    0 GND
    4.9 POWER_ON_H POWER_ON_H
    UNREG+12V
    3 P.CON+12V SW 3
    DVD_RESET
    W866

    Q3012 0.2
    RX
    RT1N241C-T1

    16V 220 YK
    TX

    1/2W

    C3017
    FROM/TO AUDIO/VIDEO
    P.CON+5V

    R3028
    CP8002 (CP8101_3) AT+5.7V

    680
    IMSA-9604S-12Z14
    DVD_POWER_H
    DVD_CVBS R3033
    12 CVBS
    11 GND 100K
    DVD_C
    10 C(CVBS) 11.3 TO IN/OUT
    (W162)
    9 GND 12.0 12.0 R3050
    R666 P.CON+12V
    DVD_Y P.CON+5V_A
    8 Y(G)
    P.CON+12V SW 22 1/2W
    1.5K 1/4W
    7 GND Q3013 P.CON+12V
    DVD_A_OUT_L KTA1281_Y
    6 AUDIO-L P.CON+5V
    2 2
    5 GND SPDIF-134
    DVD_A_OUT_R
    4 AUDIO-R DVD_A_OUT_L
    ZERO
    3 ZERO DVD_A_OUT_R
    D3004 DVD_RESET
    2 DVD RESET ZERO
    1 GND GND
    MTZJ5.6B

    PCB250
    CMD006A

    DIGITAL AUDIO SIGNAL(PB)


    1 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE
    NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED ATTENTION:LES PIECES REPAREES PAR UN ETANT
    DANGEREUSES AN POINT DE VUE SECURITE
    CAUTION:SINCE THESE PARTS MARKED BY ARE CAUTION: DIGITAL TRANSISTOR
    PLAYBACK LUMINANCE SIGNAL 1
    WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST CRITICAL FOR SAFETY,USE ONES
    WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY PLAYBACK COLOR SIGNAL
    DANS LA NOMENCLATURE DES PIECES
    AUDIO SIGNAL(PB)

    A B C D E F G H
    G-9 G-10
    A B C D E F G H

    MICON/TUNER SCHEMATIC DIAGRAM 0


    NC
    5
    0
    NC
    4
    MONITOM TUNER
    TU101 TUWRF4EK-710F2
    (AV PCB)

    PST3231NR
    8 NC 8

    3 ADRES
    NC

    RESET IC

    5 SDA

    1 AGC
    7 BPL

    4 SCL
    15

    13
    9 BTL
    IC102

    6 V.S
    RED LED DRIVE

    NC

    11 IF
    Q103 STAND BY OS101

    10

    2
    8
    TP101
    2SA1530A-T1 R132 PIC-37243SR

    14

    12
    RESET VCC GND
    3.1 3.1 0 NC 30.7 NC 4.9 NC 4.0 3.8 NC NC 2.2
    220 1 2 3

    1 Vout

    3 GND
    0

    2 B+
    D101 4.9 4.9
    2.4 C139
    LTL-1CHEE-002A

    L103 6.3V 470 YK

    50V 1 KA
    KEY_1

    0.01 B
    MTZJ33B

    R136
    R157

    15K
    C145
    C144

    C148
    1K

    R135
    1.5K 1/4W
    16V

    0.022

    100
    4.9 4.9 0 D104

    R112
    47 YK

    R138

    1SS133
    D113
    1K
    C122_1

    W869

    10uH 0305
    1SS133

    R102

    100K
    R117

    R137
    100
    R109

    75
    R105 C120

    D107
    2.2K

    C143
    10V 100 YK

    R126

    1/4W
    10K 0.1 B FORM/TO TEST POIN

    47
    7 7
    CP101
    S806X 0 S806Y A2001WV2-6P
    2.0 R106 D103
    MICON W/T.TEXT IC
    GND 1
    10K 1SS133
    IC101 OECF017C RESET SW
    I2C SCL 2
    4.9 4.6 Q101
    D112 4.9
    I2C SDA 3

    56
    KEY_1 REMOCON

    1
    C134 D110 RT1N241C-T1
    I2C OFF 4
    MTZJ5.1B 4.9 4.9 R121
    DVD_OUT-H S805Y 100P CH MTZJ5.6B RF AGC 5

    55
    DVD_OUT-H RESET

    2
    100 1/4W

    22K 1/2W
    EMERGENCE SW VIDEO OUT 6
    R120 0 0

    R104
    Q102_1 0

    54
    POWER FAIL A MUTE

    3
    C140 0.2 R151
    RT1N241C-T1 4.7K FROM/TO REGULATOR
    0 4.9
    FOR_VCR 220P CH 0 4.7K

    53
    FORTHD VCR 1 DVD RESET

    22K 1/2W
    R119 AT+5.7V

    R103
    R122 0 0
    6 EMERGENCY 100K 6

    52
    X-RAY

    5
    C108 DEGAUSS

    1SS133
    100 1/4W

    D111
    0 D117
    1.9 P.CON+5V
    22P CH

    51
    OSC_IN TU/RGB NC TUNER_BT

    6
    X101 1SS133 DVD_RESET
    100CT4R013 4.8 POWER_FAIL
    2.3 R156 RX
    4MHz DVD_POWER_H

    50
    C141_1 OSC_OUT DVD_POWER

    7
    C109 R158 56K 1/4W
    24 1.6 TX
    S805X 0
    25V 10 KA 22P CH R139 2.2K 4.7K 1/4W

    49
    SECAM VL-H DVD_POWER_H

    8
    C121_1 KEY_2
    KEY_2
    R127 0.2 R148
    4.9 C142

    48
    R101 25V 10 KA VOLUME STANDBY LED GND

    9
    VOL_PWM
    10K 10K
    10K 4.8 6.3V 47 KA POWER_ON_H
    TX 3.5 POWER_ON_H

    10
    47
    TX POWER
    0 A_MUTE TO SOUND AMP
    5.0
    5 TUNER_H 5

    11
    46
    TUNER HI IF POWER_ON_H
    H_CONT
    0 4.9 DVD_RESET A_MUTE
    R133 10K

    12
    45
    H_CONT IIC_OFF IIC_OFF VOL_PWM
    R154 R134
    0 4.9 R129
    PROTECT 10K 10K SCL FROM POWER

    13
    44

    PROTECT SDL
    R123 R114
    100 DEGAUSS
    0 0 22
    AV2 10K 4.7K EXT_MUTE POWER_FAIL

    14
    43

    AV2 EXT_MUTE
    R124 R155 4.7K DEGAUSS
    0 0.7 R144 TUNER_BT
    AV1 C149 100P CH 10K OSD_B

    15
    42

    AV1 OSD_B
    EMERGENCY
    1K
    25 0.2 R140 2.7K GND
    R107 1K 1/4W R145
    V_OUT 4.7 OSD_G

    16
    41

    V_SYNC OSD_G
    D102 MTZJ5.1B R116
    1K FROM/TO CHROMA/SIF/VIF/21PIN
    26 0.2 R141 2.7K
    D108 0.6 R146
    HD 10K OSD_R

    17
    40

    4 H_SYNC OSD_R 4
    R131 PROTECT
    1SS133 1K
    0 R142 2.7K
    4.9 R147 IF
    100K OSD_FB

    18
    39

    AVDD1 OSD_FB
    VIDEO_OUT
    1.2K
    2.0 R143 1.5K
    RF_AGC
    2.0 19 R128 100 SDA
    38

    PXFM SDA
    R115 OSD_B
    23
    R110

    0 2.5
    6.3V 220 YK

    5.6K

    OSD_G
    4.7K RX
    0.1 B
    C131

    C102

    20
    37

    JTRSTO RX
    22P CH

    W801

    OSD_R
    C103

    0 4.9 L101 D105 OSD_FB


    0.0047 B

    21
    36

    GND VDD
    C104

    SCL
    C114 0.1 B 10uH 0305 1N4005-EIC
    0 2.5 SDA
    C115_1 6.3V 1000 YK
    35

    22

    AGND JTDO NC CVBS_TXT


    C111 0 HD
    1.6
    34

    23

    CVBS1 WSCR V_OUT


    3 0.47 B 3
    44 0 FOR_VCR
    R108 C112 1.8
    CVBS_TXT
    33

    24

    CVBS2 VPP
    H_CONT
    270 82P CH
    4.7 4.9
    C101 DVD_OUT-H
    32

    25

    NC JTMS AVDD3 4.9 0 4.7 4.7


    C118

    BR24L08F-WE2
    AV1
    68P CH 4.9 8 7 6 5
    4.9 0.1 B
    31

    26

    MODE
    AVDD2

    SDA
    VCC
    TEST0

    SCL
    C105 0.6 1.6 TO IN/OUT
    R113

    MEMORY IC
    30

    27

    NC CVBSO MCFM
    0.1 B
    5.6K
    4.8
    0.0047 B

    VSS
    C106 R111 2.1 KEY_1
    22P CH

    0.1 B

    E0

    E1

    E2
    C113
    29

    28

    C119

    TXCF JTCK NC
    C116

    IC199_1
    0.022 B 15K 1 2 3 4 KEY_2
    0 0 0 0
    TO AUDIO SW
    2 L102 2
    EXT_MUTE
    10uH 0305
    AV1
    AV2
    TUNER_H

    PCB250
    CMD006A

    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED
    WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST
    ATTENTION:LES PIECES REPAREES PAR UN ETANT CAUTION:SINCE THESE PARTS MARKED BY
    CRITICAL FOR SAFETY,USE ONES
    ARE CAUTION: DIGITAL TRANSISTOR
    1 OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE DANGEREUSES AN POINT DE VUE SECURITE 1
    WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY
    DANS LA NOMENCLATURE DES PIECES

    A B C D E F G H
    G-11 G-12
    A B C D E F G H

    CHROMA/SIF/VIF/21PIN SCHEMATIC DIAGRAM


    8
    (AV PCB) 8

    FROM IN/OUT

    FRONT_VIDEO

    25V 10 KA
    C4219_1
    7 7

    100 1/2W
    R612
    SIF SAW FILTER
    CF606_1
    J1951M C4247 6.9 9.0

    3
    IN IN G OUTOUT

    0.022 B
    50V 10 KA

    R613

    R617

    C610
    L604

    1uH

    560
    1 2 3 4 5 H

    6.8K

    25V 10 KA
    C4223_1
    0 6.0
    C608

    2
    L

    3.3uH 0305
    7.0 0.01 B C4248 6.9 4.9
    27
    L603 C606 VIF PRE.AMP

    1
    L608
    L609
    50V 10 KA

    W867
    Q605
    1.5

    R4250
    MTZJ12B
    0.22uH 0.001 B VIDEO SW IC

    R4255
    KTC3881S-RTK

    390
    12uH

    D4207

    390
    0.8 IC4206
    29

    F
    MKT41.5MA110P
    R633 MM1501XNRE

    C4255

    0.1
    TPSRA6M00B00-A0
    FROM REGULATOR

    R631

    220
    820

    CF602

    R614

    R615

    R635
    2.2K

    W855
    S810Y

    82

    1K
    6 6

    CF609

    0.0022 B
    S809X

    0.0022 B
    DVD_C

    C4203

    C4221
    R4276
    VCO COIL
    DVD_Y
    L610 1K
    P.CON+A9V
    3700005
    GND

    10V 470 YK
    25V 10 KA

    0.33 B
    P.CON+5V

    47P CH

    47P CH
    C626
    C613_1

    47P CH

    R4277
    C645

    C649

    C654
    R637
    4

    F
    75
    C643
    6.3V 47 KA

    0.1 B
    DVD_CVBS

    1K
    0.1 B
    21PIN

    C629

    1
    0.001 B
    J4206

    C625

    0.01 B
    C616

    C652
    C4201

    C628

    C647
    3
    2
    1

    F
    MRC-021V-07_A

    C639
    R620

    R639
    C640

    330K
    1
    NC

    1
    0.0022 B

    0.001 B

    0.0022 B

    1
    C4202
    50V 1 KA
    560

    50V 0.47 KA
    C623

    R625
    C635

    0.022 B

    150

    2
    C611

    C615

    50V 1 KA
    B

    C650
    C641
    3P CH

    3
    C646
    1

    4
    FROM/TO AUDIO SW

    0.1 B

    0.1 B

    0.1 B
    5 R4253 5

    C655

    C656

    C657

    5
    28
    75

    6
    NC

    NC

    NC
    2.7 2.8 4.8 3.1 2.7 2.5 2.5 4.5 2.0 0 3.6 4.9 3.8 2.4 3.8 3.9 7.8 4.1 0 3.2 2.8 3.2 1.7 1.7 3.4 3.6 3.4 0 R4222
    21PIN_A_OUT_R

    7
    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 R4254
    1K
    21PIN_A_OUT_L

    8
    RF_AGC_OUT

    FM_OUT

    GND2

    BLK_EXT
    AGCSIFCAP

    CVBSIN1
    10K

    AGCPIF_CAP

    (8V) VCC2

    B_EXT/U_EXT

    G_EXT/Y_EXT

    R_EXT/V_EXT
    INT_CVBS_OUT

    CHR
    CVBSIN2
    VREF_IF

    APR
    GND_IF

    BS
    PIFIN1

    EXT_AUDIO_IN
    (5V) VCC_IF
    SIFIN1

    SIFIN2

    IFPLL

    Y/CVBS_IN3
    PIFIN2

    9
    PIF_LC1

    PIF_LC2
    21PIN_A_IN_R

    10
    NC
    21PIN_A_IN_L R4225

    11
    STV2246H
    GND R4242
    1K

    12
    NC
    R4245
    CHROMA IC 75

    13
    75

    14
    R4227

    15
    X1/VAMP/CHR_OUT
    IC601

    1K

    16
    R4248
    4 4

    17
    VCC_D (5V)
    AUDIO_OUT

    CVBSOUT2
    VCC1 (8V)
    75

    CVBSOUT

    18
    LBF/SSC

    BCL/SAF
    FM_CAP

    OSD_BK
    GND_D

    OSD_R

    OSD_G
    H_OUT

    OSD_B
    XTAL1

    XTAL2

    XTAL3

    R.OUT

    G.OUT

    B.OUT
    GND1
    BUFFER

    ICATH
    VERT

    19
    SLPF

    CLPF
    SDA

    SCL
    Q606

    20
    2SC3052-T1
    56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29

    21
    R4256
    1.5 4.5 0 4.9 5.0 5.0 4.2 5.2 2.0 4.6 5.4 7.8 5.0 0 2.8 2.4 2.2 0 0.2 0 4.1 4.2 4.8 4.5 1.7 1.7 2.6 4.4
    8.3

    0.1 B
    R621

    R640

    R641

    R642
    C653
    0.1 B

    0.1 B
    34 30 75

    R622

    C648

    C651

    220

    220

    220
    2.2K
    0305

    15K
    10uH

    R634
    4.4

    47K

    4.433619MHz
    100CT4R408
    470 1/4W
    11 4.0

    0.1 B
    R665

    C630

    C644
    0.0047 B

    B
    L606

    31 32 33
    47P CH

    47P CH
    C622

    0.0047 B
    X601
    AUDIO_OUT FROM/TO CRT

    R624
    C619
    PROTECT

    C637
    1
    390 1/4W 0
    C618

    B
    Q609
    6.3V 100 KA

    10V 470 YK
    R629

    27K
    C627
    R650 0.1
    50V 1 KA

    R638
    CP802A (CP802B)
    50V 2.2 KA

    47K
    (W063) 2SC3052-T1
    0.1 B
    C607

    S807X B2013H02-6P
    C612

    0.01
    4.7K

    C638

    B
    R626

    2.2K
    C614

    CLAMP_OFF

    C631
    4.7 CLAMP_OFF 1

    R644
    C620

    1K
    1
    B.OUT
    3 B.OUT 2 3
    FROM/TO MICON/TUNER R.OUT
    R.OUT 3
    S811X S811Y 36 G.OUT
    G.OUT 4
    AV1 GND
    GND 5
    R645 D604
    IF CLAMP
    CLAMP 6

    16V 22 KA
    C659
    R656

    R628

    5.6K
    330 1SS133
    R618

    R619

    R4249

    C632
    100
    1K

    100

    41 FROM/TO DEFLECTION
    RF_AGC
    R627

    C666_1

    10 KA
    8.2K

    R648
    R630 75

    25V
    680
    10V 470 YK
    SDA H_OUT

    R657

    390
    SCL 2.7K 1/4W
    220P B
    VAMP
    11E1-EIC
    1N4937

    HD ABCL
    D602

    D603

    500V
    C667

    AFC
    DVD_OUT-H
    V_OUT
    C665
    R623 FROM/TO MICON/TUNER
    0.1 F
    2 VIDEO 0 2
    C661_1 3.1 8.9 560 1/2W VIDEO_OUT
    35 BUFFBER H.CONTROL 4.0 0.1
    R653 FOR_VCR
    4

    R646 Q607
    15K
    Q610 8.0 H.CONTROL
    25V 10 KA H 0 8.0 V_OUT
    0 3.2 C660 2SA1530A-T1 RT1P14C-T112-1 Q608
    470 2SC3052-T1 CVBS_TXT
    8.1
    5

    +6dB
    OSD_B
    L
    6.3V 470 YK 3.2
    C662_1 3.1 4.9 3.8 OSD_G
    25V 10 KA
    6

    C642_1

    25V 10 KA OSD_R
    R652

    39K

    1/2W
    VIDEO SW IC OSD_FB PCB250
    R654
    IC602 MM1502XNRE
    220 R658 PROTECT CMD006A
    L611 H_CONT
    100
    100uH 0305
    1 CAUTION: DIGITAL TRANSISTOR PLAYBACK LUMINANCE SIGNAL 1
    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST PLAYBACK COLOR SIGNAL
    WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

    A B C D E F G H
    G-13 G-14
    A B C D E F G H

    SOUND AMP SCHEMATIC DIAGRAM


    8 8

    (AV PCB)

    SOUND AMP IC SOUND AMP IC


    IC301 AN7523N IC302 AN7523N

    7 7

    + - R + - L

    1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9
    7.8 5.6 0 5.5 4.6 1.5 0 0 1.1 7.8 5.6 0 5.6 4.6 1.5 0 0 1.1
    NC NC

    6 38 6

    L CH
    CP301 SP301
    213213102W1 TC4070E001-0109C SPEAKER L301
    SP OUT L+ 1 1
    8 OHM
    SP OUT L- 2 2
    CD301 W5T18.4X10X9.6
    CU122501
    R CH
    CP302
    213213102W1 SPEAKER
    L302
    SP OUT R+ 1 1
    5 8 OHM 5
    FROM POWER SP OUT R- 2 2
    CD302 W5T18.4X10X9.6

    B
    37 CU122501 SP302
    25V 10 KA

    C306

    C309
    0.0047

    0.0047
    SOUND+B TC4070E001-0109C
    C312_1
    16V 1000 YK
    C313

    SOUND_GND
    6.3V 47 KA
    C328

    W813
    R316

    18K

    GND

    50V 2.2 KA
    W845 0
    R344

    C330
    0
    MUTE
    1K Q304
    FROM MICON/TUNER 0 0 2SC3052-T1
    W826

    W825
    R345
    C337
    4 MUTE 4
    R315 1K 0
    Q303 1 B HEADPHONE_JACK
    POWER_ON_H 0
    2SC3052-T1 J4202
    68K C340
    W872 MSJ-2000_AG
    VOL_PWM
    MUTE 1 B 7
    0 C4275

    50V 2.2 KA
    R323 R346

    50V 2.2 KA
    0 Q301
    6

    C347
    A_MUTE

    C346
    2SC3052-T1 0.1 F C4259 R4262
    4.7K 1/4W 1K 2
    0.4
    W820 C4274 C4258 16V 47 YK R4261 100 1/2W
    3
    0.1 F 16V 47 YK 100 1/2W
    4
    5
    1/4W

    33K 1/4W

    5.6K 1/4W
    R308

    R301

    R314

    1
    FROM AUDIO SW
    6.8K

    C301_1
    R318
    3 SW_A_OUT_R 3
    25V 10 KA 22K 1/4W
    C302_1
    R319
    SW_A_OUT_L
    25V 10 KA 22K 1/4W

    2 2

    PCB250
    CMD006A

    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED ATTENTION:LES PIECES REPAREES PAR UN ETANT
    CAUTION:SINCE THESE PARTS MARKED BY ARE AUDIO SIGNAL
    1 OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST DANGEREUSES AN POINT DE VUE SECURITE CRITICAL FOR SAFETY,USE ONES 1
    N’UTILISER QUE CELLS DECRITES AUDIO SIGNAL(PB)
    WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DESCRIBED IN PARTS LIST ONLY
    DANS LA NOMENCLATURE DES PIECES TUNER AUDIO SIGNAL
    DIGITAL AUDIO SIGNAL(PB)

    A B C D E F G H
    G-15 G-16
    A B C D E F G H

    IN/OUT SCHEMATIC DIAGRAM


    8 (AV PCB) 8

    TO AUDIO SW
    7 SKIP+ 7
    SW2201
    DVD_AUDIO_L
    DVD_AUDIO_R EVQ21505R

    R2201

    2.2K
    FRONT_A_IN_L SKIP-
    FRONT_A_IN_R SW2202

    EVQ21505R

    R2217
    L4202

    1.2K
    STOP
    SW2206
    100uH 0305

    R4247
    EVQ21505R

    1.5K

    R2202

    820
    TO CHROMA/SIF/VIF/21PIN OPEN/CLOSE
    SW2207
    4.9
    R4205 1.6 D AUDIO DRIVER
    6 FRONT_VIDEO Q4201 EVQ21505R 6

    R2208
    2.2K

    390
    2SC3052-T1 PLAY
    1.2
    SW2204
    B

    R4216 C4215 B4201


    C4205

    0.022

    EVQ21505R
    68 0.1 B W5RH3.5X5X1.0
    CH UP
    SW2208
    10V 100 YK
    C4204_1

    R4221
    EVQ21505R

    100K

    R2204

    2.2K
    CH DOWN
    R4246

    R4210
    3.3K

    220 SW2209

    EVQ21505R

    R2205
    FROM REGULATOR

    1.2K
    VOL +
    S803Y S803X SW2210
    5 5
    P.CON+5V
    E COAXIAL EVQ21505R
    P.CON+5V_A 1

    R2206
    R4243
    J4201

    820
    W859
    10K
    R4203

    VOL -
    4.7K

    SPDIF-134
    MSP-251V-05NI-FE-LF SW2211
    L4201 2
    H
    P.CON+12V EVQ21505R

    R2207
    100uH 0305

    390
    DVD_A_OUT_L
    C4224
    DVD_A_OUT_R 0
    MUTE DET
    ZERO 100P CH
    Q4203
    2.9
    GND 0 RT1N441C-T1

    220P CH
    C4233

    4 4

    DVD_AUDIO_R
    DVD_AUDIO_L
    R4241
    FRONT_A_IN_R
    1K 50V 2.2 KA

    R4244
    FROM MICON/TUNER FRONT_A_IN_L 1K 1/4W
    C4220 R4229
    C4229
    16V 100 YK

    FRONT_VIDEO 1K 1/4W
    C4217

    0.0015 B 12K
    100P CH
    C4226

    0.0022 B

    FRONT VIDEO JACK


    R4230

    KEY_1

    C4260

    FRONT AUDIO JACK


    FRONT AUDIO JACK
    MTJ-032-05A-30-F
    NC NC

    MTJ-032-05A-32-F

    MTJ-032-05A-31-F
    R4208 R4224

    100P CH
    KEY_2

    C4267
    H NC H NC H NC
    2 3 2 3 2 3

    J4203

    J4205
    10K R4231

    J4204
    10K

    0.0022 B
    C4231 39
    10K

    C4261
    W805 1 1 1
    B

    E E E
    C4216

    16V 22 KA MUTE SW.


    NJM4580M(TE1)
    0.1

    0 5.2 5.2 5.2


    3 4 3 2 1 Q4210 3
    5.2
    RT1P431C-T112-1 YELLOW WHITE RED
    A_GND

    5.2
    -
    R4251

    C4206
    100

    R4201 R4211 + MUTE SW


    AMP IC

    DVD_A_OUT_L 0 Q4212
    R4238

    3.3K

    50V 2.2 KA 100K + 2SC3052-T1


    10K
    - 0
    VCC

    IC4201

    5.2 MUTE SW. R4239


    0
    5 6 7 8 0 Q4209
    820P CH

    5.2 5.2 5.2 10.4 1K


    C4212

    RT1N241C-T1 0
    C4232 0 40
    R4218

    W804
    1K

    C4207
    R4233 R4232

    R4202 R4212 16V 22 KA


    10K

    DVD_A_OUT_R C4222 R4228


    R4240
    R4237 10K R4252

    1K

    10K 50V 2.2 KA 100K MUTE SW


    100

    0.0015 B 12K 0
    50V 2.2 KA 1K

    Q4211
    R4213 R4223
    50V 4.7 KA
    R4236

    2 2SC3052-T1 2
    100P CH

    C4234

    0
    10V 33 KA

    KEY_1

    KEY_2
    10K 10K
    820P CH

    C4225

    C4230
    C4214
    R4219
    C4210

    0
    10K
    1K

    PCB250
    CMD006A

    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE EACH PART WAS CAUTION: DIGITAL TRANSISTOR CAUTION: DIGITAL TRANSISTOR DIGITAL AUDIO SIGNAL(PB)
    1 MEASURED WITH THE DIGITAL TESTER AUDIO SIGNAL 1
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE
    DURING PLAYBACK.
    AUDIO SIGNAL(PB)

    A B C D E F G H
    G-17 G-18
    A B C D E F G H

    AUDIO SW SCHEMATIC DIAGRAM


    8 (AV PCB) 8

    7 7

    L4205_2

    1mH
    AUDIO_SW IC
    IC4202 BA7644AN

    F
    C4253
    MUTE

    0.1
    LOGIC

    C4249_1 6.9 11.8


    6 FROM MICON/TUNER 1 2 3 4 5 6 7 8 9 10 TO CHROMA/SIF/VIF/21PIN 6

    3
    2.9 5.0 5.0 2.6 0 2.6 8.9 2.6 0 1.6 25V 10 KA H
    0 6.1 C4256_1 42

    CH
    R4260
    21PIN_A_OUT_L

    2
    C4270
    AV1

    C4279
    470 1/4W

    470P
    25V 10 KA

    1/4W
    C4252_1 6.9 L
    0
    C4269 470P CH

    R4257
    AV2
    21PIN_A_OUT_R

    1
    TUNER_H 25V 10 KA

    1K
    470P CH
    AUDIO SW IC
    EXT_MUTE IC4204

    25V 10 KA

    R4206
    C4228_1
    MM1501XNRE

    4.7K
    FROM IN/OUT

    25V 10 KA
    C4245_1
    25V 10 KA
    C4235_1

    C4237_1
    25V 10 KA

    16V 330 YK
    2.2

    C4243
    DVD_AUDIO_R 43
    1.6
    DVD_AUDIO_L
    W827 0
    FRONT_A_IN_L BUFFER 0
    5 Q4202 R4264 0.7 MUTE SW 5
    W828
    FRONT_A_IN_R Q4214

    0.01 B
    C4241
    2SA1530A-T1
    4.7K 2SC3052-T1
    0 0
    R4265 MUTE SW
    FROM CHROMA/SIF/VIF/21PIN 0.7
    Q4213
    4.7K 2SC3052-T1
    0
    GND

    AUDIO_OUT

    21PIN_A_IN_L

    21PIN_A_IN_R AUDIO_SW IC
    4 IC4203 BA7644AN 4
    MUTE

    LOGIC
    FROM REGULATOR

    470 1/4W
    25V 10 KA
    C4227_1

    R4259
    C4254
    GND

    F
    1 2 3 4 5 6 7 8 9 10

    0.1
    P.CON+12V
    2.9 5.0 5.0 2.6 0 2.6 8.9 2.6 0 1.6
    C4276

    KA
    C4257_1
    C4273 470P CH C4250_1 6.9 11.8

    10
    4

    3
    470P CH

    1K 1/4W
    25V 10 KA

    25V
    H

    R4258
    0 0.1
    3 3
    25V 10 KA
    C4236_1

    2
    470P
    C4281
    25V 10 KA

    25V 10 KA

    CH
    C4238_1

    C4246_1

    C4251_1 6.9 L
    0
    R4207

    4.7K

    1
    TO SOUND AMP
    2.2 25V 10 KA
    W830
    1.6 AUDIO SW IC
    W831 IC4205 SW_A_OUT_L
    MM1501XNRE
    BUFFER 0 SW_A_OUT_R
    Q4208
    2SA1530A-T1
    0.01 B
    C4244

    S809Y
    W868

    2 2

    PCB250
    CMD006A

    NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME AUDIO SIGNAL(REC)
    1 WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE 1
    WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.

    A B C D E F G H
    G-19 G-20
    A B C D E F G H

    DEFLECTION SCHEMATIC DIAGRAM (AV PCB)


    8 8

    V-DRIVE IC IC401 TDA8174A

    RAMP GENERATOR
    OUTPUT STAGE Vs

    INVERTING INPUT
    BUFFER OUTPUT
    POWER OUTPUT

    FB. GENERATOR
    TRIGGER INPUT

    Vref. DECOUP.
    TO DY

    HEIGHT ADJ.
    CP402
    A1561WV2-A5P

    GND

    Vs
    5
    1 2 3 4 5 6 7 8 9 10 11 4
    1.6 2.6 4.9 6.8 4.5 0 5.4 6.0 4.4 2.6 1.9 3
    7 7

    +-1% 1/4W
    100V 0.047 MMTV
    50V 10 YK
    NC 2
    15

    1/4W C408
    R404
    1

    C412

    35V 100 YK
    R412_2
    330K 1/4W

    390K

    C413

    F
    R403

    C414

    0.1
    8.2K
    D403

    1/2W
    C401

    R413
    11E1-EIC
    17 L402

    680
    500V 22P SL

    1K 1/4W

    330 1/2W

    1/2W
    METAL
    20416A

    V.LIN
    VR401
    W846
    R414

    470

    R409

    R411
    R406 R420 R448

    V.POSI

    2.2K METAL
    330
    6.8K 1/4W 8.2K 1/4W 1K 1W

    50V 10 YK 1K 1/4W
    6 6

    VR402
    R419_1
    3.3K +-1% 1/4W

    100V 0.22 MKT 2.2 1/2W


    C450

    1 1/2W 25V 2200 MHE


    R417_1

    R416
    2KV 220P R

    C405
    C417

    680 1/2W
    R421
    C403
    HS401_1
    763WSAA013

    R407
    V801
    C431 A34JXV70X73N45
    CD401

    CH01801A R430 250V 10 MHE

    1N4937
    D413
    9
    330 2W

    11E1-EIC
    10

    D406
    8 R
    R408 G

    250V 1 MHE 4.7mH


    5 6 5

    L401

    0909
    D404
    11 B

    250V 0.33 PMS


    220 2W 5 7 1
    11E1-EIC

    C423
    C422
    FROM/TO CHROMA/IF
    TO CRT

    (CP801)

    68 1/2W
    H_OUT CD402

    R447
    CUG06001
    VAMP
    CD403
    CUG06001

    W5RH
    3.5X5X1.0
    V_OUT

    B403
    16
    T401
    AFC
    ETH09K14BZ
    ABCL 31.0 0 247.6 FB401_1 FNI14B001_M

    MPP
    4 3 4 1.3 4
    MMTS

    247.6
    NC 2 H.OUTPUT COL
    100V

    1 HV
    C404

    C424

    1.25KV 0.0084
    0 Q406 TO SHIELD TOP
    1 6 2SC5885
    50V 22 MHE

    W5RH3.5X5X1.0
    31.0 22.3 1.3
    0.01

    0.5
    W816

    W841

    FOCUS
    C418

    100 1/4W
    126.0
    470 1/2W

    B402
    H-DRIVE C429 VIDEO F
    6
    R460
    Q405 0
    R456

    TO CRT
    KTC3227_Y 131.0 SCREEN
    2KV 470P B B+ S
    D411 2
    FROM POWER GND 0
    HS402 11
    1N4937 AFC
    9
    763WSAA013 NC HEA ABL 2.5
    7
    H_GND 10 TER

    35V 1000 MHE


    GND
    UNREG+12V 8

    C421
    NC E12
    3 4 GND 0 3
    8
    +B
    E25
    3
    GND E8
    5
    W852

    11E1-EIC
    D405
    50V 0.33 KA
    TO CRT

    68K 1/4W
    C432

    R490
    CP803A (CP803B_1)
    R450_1 B2013H02-4P
    R423
    HEATER
    HEATER 1
    D407
    470 1/2W 4.7 1W
    H_GND 2
    R410 W843
    11E1-EIC
    NC 3
    2 220K 1/2W 180V 2
    180V 4

    PCB250
    CMD006A

    1
    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED
    WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST
    NOTE: THE RESISTOR MARKED F IS FUSE RESISTOR. CAUTION:SINCE THESE PARTS MARKED BY
    CRITICAL FOR SAFETY,USE ONES
    ARE
    ATTENTION:LES PIECES REPAREES PAR UN ETANT
    1
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP DANGEREUSES AN POINT DE VUE SECURITE
    WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES
    IS NON POLAR ONE.
    DANS LA NOMENCLATURE DES PIECES

    A B C D E F G H
    G-21 G-22
    A B C D E F G H

    CRT SCHEMATIC DIAGRAM


    8
    (CRT PCB) 8

    0 0
    J801 126.5
    6
    ISMS01S 0 5 7 104.1
    4 8
    127.5
    3 9
    127.5

    1
    TP801 F
    0
    7 20 R802 7
    15K 1W
    R807

    132.5 2.7K 1/4W

    2.8 BLUE AMP


    Q804
    2.5
    2SC4217
    D802

    1SS133

    6 FROM/TO CHROMA/IF 6
    R814
    CP802B (CP802A)
    6.8K
    B2013H02-6P

    390P CH

    R811
    CLAMP

    270
    C809
    6 CLAMP
    GND
    5 GND
    G.OUT
    4 G.OUT
    R.OUT TP802
    3 R.OUT
    B.OUT
    2 B.OUT 19 R805
    CLAMP_OFF
    1 CLAMP_OFF
    15K 1W

    132.1

    5 2.9 GREEN AMP 5


    D801 Q805
    2.5 R808
    2SC4217
    R815 1SS133 2.7K 1/4W

    6.8K

    270P CH
    C810

    R812

    270
    FROM DEFLECTION

    CP803B_1 (CP803A)
    52147-0410
    HEATER
    1 HEATER
    H_GND
    2 H_GND
    4 4
    3 NC
    180V TP803
    4 180V
    R810

    15K 1W

    18
    R820

    2.7K 1/4W

    132.3

    2.8 RED AMP


    Q806
    3 D803 2.5
    2SC4217 3
    1SS133

    82uH
    L801
    R816

    6.8K
    270P CH

    C801
    C811

    R813

    270

    2KV 0.0022 B
    ACCESSORY

    ANT001
    180PRA-PP-01
    2 2

    SCREEN
    FOCUS
    TM101
    BT001 076D0KS010
    R03(AB)E_2P_G
    FROM/TO DEFLECTION

    FROM/TO DEFLECTION
    CP801 (CD805)

    BT002
    A2361WV2-2P

    R03(AB)E_2P_G
    GND
    GND

    PCB110

    CP806_1
    CCD003A PCB250
    CMD006A
    2
    1

    1 1
    NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED
    WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST
    NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME CAUTION:SINCE THESE PARTS MARKED BY ARE ATTENTION
    :LES PIECES REPAREES PAR UN ETANT
    DANGEREUSES AN POINT DE VUE SECURITE
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE CRITICAL FOR SAFETY,USE ONES
    WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES
    DANS LA NOMENCLATURE DES PIECES

    A B C D E F G H
    G-23 G-24
    A B C D E F G H

    POWER SCHEMATIC DIAGRAM


    8 (AV PCB) 8

    TO SOUND AMP
    R3819
    D3815
    SOUND+B

    16V 2200 MHE


    0.22 3W 21DQ09N
    C3829 SOUND_GND

    C3832
    500V 470P B GND

    7 D3801 7
    TO MICON/TUNER
    1SS133 0.1
    RELAY SW R3804
    0.7
    Q3801 DEGAUSS
    10K 1/4W R3830
    KTC3203_Y

    10K 1/4W
    0.0 EMERGENCY

    R3802
    22K 1/4W
    EMERGENCY
    Q3806 TUNER_BT
    0
    2SA1624E GND
    RY3801 2 1
    ALKS321 134.8 POWER_FAIL

    W837
    0 C3840
    3

    220P CH
    4 TH3801

    C3830
    PTDAA1BF140M200 T3801 81300064 50V 22 YK
    R3826 TO DEFLECTION
    C3807

    1/4W
    6 6

    R3831
    DEGAUSS COIL 10 2KV 680P R 68K
    UNREG+12V

    4.7K
    L3800
    R3806 B3802 D3813 R3827
    8R140018 D3802 D3804 270 8.5
    8 11 +B

    200V 220 YXF


    CP3801

    2KV 220P R 100K 3W


    W5RH3.5X5X1.0 RU2AM-EIC 0.82 2W

    2KV 470P R

    RU2AM-EIC 500V 0.01

    100K 1/2W
    E
    RM11C-EIC RM11C-EIC 0.22 1W

    R3813
    A1561WV2-2P

    C3817
    GND

    R3824
    C3831
    270 0

    C3810

    150K 1/2W
    1 7 12
    1

    R3807
    400V 220 USR
    2
    2

    270 135.0

    C3818
    C3814
    6 13

    D3808
    F3801
    COIL LINE FILTER R3803

    2KV 470P R
    50T050H B3801 0
    L3801 400

    C3809
    5.6 7W C 5 14 H_GND
    BROWN SS28V-K10410
    W5RH3.5X5X1.0

    W838
    4
    D3803 D3805 8.0 TO REGULATOR
    1.5M 1/2W

    BLUE 15 R3823
    FH3801 FH3802 NC
    R3801

    150K 1/2W
    RM11C-EIC RM11C-EIC D3819
    CD3802 EYF-52BCY EYF-52BCY UNREG+5V

    R3808
    5 0 5

    10V 2200 MHE


    CUU23001 4 3 SB340FL-6737 1.5 3W
    3

    NC 3 16 UNREG+12V
    1

    C3836
    2 1 0 13.3 UNREG+8V
    ECQUL

    2 17
    2

    POWER REG. IC
    C3801_1

    0 9.5
    IC3801 STR-W6853
    275V 0.22

    1 18 GND
    CP3802
    A3963WV2-3PD

    16V 2200 YK
    C3842
    OCP/BD

    FB/OLP
    S/GND

    RTFC
    VCC
    D

    MTZJ15B
    1 3 4 5 6 7 D3820

    D3824
    AC230V-240V_50Hz 325.0
    0.1 21.0 1.7 3.2 7.3
    CD3803 31DQ09-FC
    06435801 D3821
    4 C3804 C3816 4
    BLUE
    31DQ09-FC
    2KV 0.0022 R 0.001 B

    4.7K 1/4W
    S3801 4 3

    R3833
    0
    240K1/4W

    1N4937
    R3814

    BROWN

    D3823
    NC NC
    S3802 1
    0 C3811
    2
    470P CH
    1SS133

    R3832
    D3807

    R3835

    330

    MAIN POWER SW 100 1/2W


    R3811

    L3803 SW3801
    22K

    C3812

    50V 2.2 YK
    ESB92S23B

    25V 2200 MHE


    HF70T22*10*14

    220 1/4W

    C3844
    1/4W

    0.001 B C3823

    R3822
    R3810

    C3835
    50V 22 YK
    1N4937 C3802

    0.001 B
    1K

    S810X
    25V 10 KA
    C3815_2

    9.7
    3 6.3 3
    R3834 FEED BACK
    D3806

    SWITCHING

    1
    0.0022 B
    1SS133

    1SS133
    12.3

    D3814
    2.2K 9.1 Q3805
    D3809

    C3819

    5.7

    R3815
    0.0047 B

    560
    KTC3198
    C3820

    2
    0.3 8.1
    R3820

    FEED BACK 1K 1/4W

    R3816
    R3812

    3.9K
    IC3804
    PS2561AL1-1-V(W)
    68 1/2W
    0.33 1W
    R3805

    470 METAL
    HS3801
    W857

    MTZJ5.6B
    763WAA0181

    +B ADJ

    VR3801
    NC

    D3812
    W861
    NC
    W862
    2 NC 2
    W863
    250V 0.0022 KX

    NC
    C3822

    PCB250
    CMD006A

    1
    ATTENTION:LES PIECES REPAREES PAR UN ETANT CAUTION:SINCE THESE PARTS MARKED BY
    CRITICAL FOR SAFETY,USE ONES
    ARE NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE
    NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED
    WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST 1
    DANGEREUSES AN POINT DE VUE SECURITE
    N’UTILISER QUE CELLS DECRITES DESCRIBED IN PARTS LIST ONLY WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL.
    DANS LA NOMENCLATURE DES PIECES

    A B C D E F G H
    G-25 G-26
    A B C D E F G H

    8 8
    LOADING MOTOR/SW SCHEMATIC DIAGRAM

    7 7

    6 6

    (SW PCB) (LOADING MOTOR PCB)


    5 5

    SW1
    CD2302 SSS-13-2
    SW2
    ESE22MH24 2H052601
    CD2301
    5 SW-2(CLOSE)
    2H062102
    4 GND(SW)
    1 GND(SW)
    3 SW-1(OPEN)
    2 PICK UP INNER LIMIT SWITCH
    2 LOADING MOTOR(+)
    3 FEED MOTOR (-) M2602
    4 FEED MOTOR (+)
    M BCZ3B03 1 LOADING MOTOR(-)
    M2603
    5 SPINDLE MOTOR (-) M BCZ3B52
    6 SPINDLE MOTOR (+)
    4 4
    M2601
    M JCV9B06
    PCB640 PCB610
    DED002 DED003

    3 3

    2 2

    NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME


    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE

    1 1

    A B C D E F G H
    G-27 G-28
    A B C D E F G H

    COMMAND TRANSMITTER
    TM101
    INTERCONNECTION DIAGRAM
    CP2601
    8 T- 1 1 1 T- 8
    T+ 2 2 2 T+
    L4002
    F- 3 3 3 F-
    F+ 4 4 4 F+
    MON(DVD) 5 5 5 MON(DVD)
    CP8001 DVD

    TO OS101
    CD4002 6 6 NC(SW)
    NC(SW) 6 DRIVE
    GND 1 1 GND VOL(DVD) 7 7 7 VOL(DVD) DM-3
    GND 2 2 GND GND(DVD) 8 8 8 GND(DVD)

    CP101
    TX 3 3 TX 9 9 LD(DVD)

    OS101
    1
    2
    3
    4
    5
    6
    LD(DVD) 9

    3 GND

    1 Vout
    DEGAUSS COIL

    2 B+
    RX 4 4 RX LD(CD) 10 10 10 LD(CD)
    L3800

    VIDEO OUT
    GND(M) 5 5 GND(M) VOL(CD) 11 11 11 VOL(CD)

    I2C SDA

    RF AGC
    CP3801

    I2C SCL

    I2C OFF
    GND
    P.CON+9V 6 6 P.CON+9V GND(CD) 12 12 12 GND(CD)
    1

    1
    7 P.CON+5V_A 7 7 P.CON+5V MON(COM) 13 13 13 MON(COM) 7
    2

    2
    P.CON+3.3V 8 8 P.CON+3.3V DVD/CD 14 14 14 DVD/CD
    P.CON+3.3V 9 9 P.CON+3.3V RF 15 15 15 RF
    GND 10 10 GND 16 OPTICAL PICK-UP
    C 16 16 C
    CD3802 CP3802
    SPDIF-134 11 11 SPDIF-134 B 17 17 17 B

    1
    CD8101 CP8101_3 18
    CP8002 A 18 18 A
    FFC
    CVBS 12 12 1 1 CVBS D 19 19 19 D

    2
    GND 11 11 2 2 GND F 20 20 20 F
    C(CVBS) 10 10 3 3 C(CVBS) E 21 21 21 E
    GND 9 9 4 4 GND VCC 22 22 22 VCC
    Y(G) 8 8 5 5 Y VREF 23 23 23 VREF
    AC230V-240V_50Hz GND 7 7 6 6 GND GND(PDIC) 24 24 24 GND(PDIC)
    6 CD3803 AUDIO-L 6 6 7 7 AUDIO-L SPINDLE MOTOR 6
    GND 5 5 8 8 GND CP2602 FFC
    BLUE S3801
    4 3 AUDIO-R 4 4 9 9 AUDIO-R CLOSE 1 1 1 CLOSE
    ZERO 3 3 10 10 ZERO GND(D) 2 2 2 GND(D)
    BROWN NC NC
    DVD RESET 2 2 11 11 DVD RESET OPEN 3 3 3 OPEN
    S3802 1
    SLED,LOADING MOTOR
    GND 1 1 12 12 GND LD+ 4 4 4 LD+
    L3803 2
    LD- 5 5 5 LD-

    MAIN POWER SW CP802A CP2603


    FG SENSER
    SP1+ 1 SP1+
    SW3801 CLAMP_OFF 1
    SP1- 2 SP1-
    B.OUT 2
    SLD+ 3 SLD+
    R.OUT 3
    SLD- 4 SLD-
    L301 G.OUT 4 DVD PCB
    5 L CH SP301 CD301 CP301
    PCB130 LIMIT SW 5 LIMIT SW 5
    SPEAKER GND 5
    1 1 SP OUT L+ DMD008 SW(GND) 6 SW(GND)
    8 OHM CLAMP 6
    2 2 SP OUT L-

    R CH SP302
    L302 CD302 CP302
    SPEAKER
    1 1 SP OUT R+
    8 OHM
    2 2 SP OUT R-

    1
    2
    3
    4
    5
    6
    CP802B
    CLAMP_OFF

    CLAMP
    R.OUT
    G.OUT
    B.OUT

    GND
    7
    6
    2
    HEADPHONE_JACK
    4 J4202 3 4
    4
    5
    1
    1

    21PIN
    2

    J4206 CP803A CP803B_1


    3

    HEATER 1 1 HEATER
    4

    H_GND 2 2 H_GND
    5

    3 3 3 3
    6

    180V 4 4 180V
    7

    MONITOM TUNER
    8

    TU101
    9

    SCREEN FOCUS
    10

    NC
    15 14

    9
    11

    IF 11

    CRT SOCKET
    12

    NC

    7
    10 NC
    13

    SCREEN

    J801

    F
    6
    AV PCB
    14

    FOCUS
    BTL 9
    PCB250

    1
    15

    5
    CMD006 CP801
    8 NC CD805

    4
    16

    FBT

    3
    FB401_1 GND 1
    17

    BPL 7 GND 2
    18

    2 2
    V.S 6 NC
    19

    V801
    20

    SDA 5 TO SHIELD TOP

    CRT
    CP402
    21

    H.V
    SCL 4 CD402 1
    CD401 NC
    FRONT VIDEO JACK FRONT AUDIO JACK FRONT AUDIO JACK COAXIAL 2

    ANODE
    ADRES 3 NC J4203 J4204 J4205 J4201 CRT PCB
    3
    CD403 PCB110
    E E E E 4
    2 NC 1 1 1 1 CCD003
    5
    AGC 1
    2 3 2 3 2 3 2
    13 12 H NC H NC H NC H
    YELLOW WHITE RED

    1 1

    CAUTION :SINCE THESE PARTS MARKED BY ARE ATTENTION:LES PIECES REPAREES PAR UN ETANT
    DANGEREUSES AN POINT DE VUE SECURITE
    NOTE: THIS INTERCONNECTION DIAGRAM IS THE LATEST AT THE TIME
    OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE
    CRITICAL FOR SAFETY,USE ONES
    DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES
    DANS LA NOMENCLATURE DES PIECES

    A B C D E F G H
    G-29 G-30
    WAVEFORMS

    MPEG/MICON/DSP AUDIO/VIDEO CHROMA/SIF/VIF/21PIN


    10ns 500µs 10µs
    100mV 100mV 5.0V

    1 6 11

    DEFLECTION
    500µs 5ms
    200ns
    100mV 0.5V
    20mV

    2 7 15

    MEMORY
    5ns 10µs 20µs
    20mV 200mV 200mV

    3 8 16

    RF AMP
    10µs 5ms
    200ns
    200mV 10.0V
    20mV

    4 9 17

    CRT
    200ns 10µs 20µs
    10mV 100mV 20.0V

    5 10 18

    NOTE: The following waveforms were measured at the point of the corresponding
    balloon number in the schematic diagram.
    H-1
    WAVEFORMS

    20µs 5ms 0.1µs


    20.0V 1.0V 100mV

    19 25
    30

    20µs 20µs 20µs


    5.0V 1.0V 1.0V

    20 26 31

    MICON/TUNER CHROMA/SIF/VIF/21PIN
    0.5ms 1ms 20µs
    1.0V 0.5V 1.0V

    32
    22 27

    0.5ms 20µs 20µs


    1.0V 0.5V 1.0V

    23 28
    33

    50ns 20µs 5ms


    1.0V 0.5V 0.5V

    24 29
    34

    NOTE: The following waveforms were measured at the point of the corresponding
    balloon number in the schematic diagram.

    H-2
    WAVEFORMS

    20µs 0.5ms
    2.0V 200mV

    35 40

    CHROMA/SIF/VIF/21PIN
    20µs 10µs
    2.0V 0.5V

    36 41

    SOUND AMP AUDIO SW


    1ms 1ms
    100mV 0.5V

    37

    42

    1ms 1ms
    100mV 0.5V

    38 43

    IN/OUT MICON/TUNER
    0.5ms 10µs
    200mV 1.0V

    44
    39

    NOTE: The following waveforms were measured at the point of the corresponding
    balloon number in the schematic diagram.

    H-3
    MECHANICAL EXPLODED VIEW
    203
    123

    203

    207
    203

    203

    201 102

    201
    111 PCB110
    (CRT PCB ASS'Y)

    201
    124 125

    201
    125

    210

    101E
    210

    101C
    101F

    210
    101B
    A

    101D

    101A
    101

    I1-1
    MECHANICAL EXPLODED VIEW

    115
    208

    213 120
    208
    105 208 208
    213 208
    105
    208 208
    208 120
    208
    122
    120
    209 PCB130
    (DVD PCB ASS'Y)
    209
    208
    113
    209
    208
    208
    120
    208
    209

    121 202
    208 114

    207
    208 104 116
    208

    208

    204

    118 A

    110 112

    106
    205 206
    103
    120
    207
    212 208 205 207
    211 205
    107
    109 PCB250
    (AV PCB ASS'Y)
    117
    119
    108

    I1-2
    MECHANICAL EXPLODED VIEW
    (PACKING DIAGRAM)

    ANT001

    129

    126, 133, 134, 135, 136,


    TM101

    129

    129

    127 128

    131

    130

    130 127

    130

    I1-3
    DVD DECK EXPLODED VIEW

    611
    600
    608 612

    AA Cannot supply separately.


    If the repair is needed, replace the
    704
    LOADER SUB ASS'Y.
    610

    614
    AA
    AA

    AA
    AA AA

    613 619
    AA
    602 AA
    AA
    609
    AA 607
    M2603

    615 SW1
    AA

    PCB610
    705 (LOADING MOTOR PCB ASS'Y)

    617 701

    CD2301 616 604 CD2302


    705
    SW2
    618
    PCB640 702
    (SW PCB ASS'Y) CD2001

    703 Do not replace the parts. Because,


    606 minute adjustments are needed if
    this condition is disassembled
    605 further more.
    If the repair is needed, replace the
    DVD MECHA ASS'Y.
    603

    M2602
    605

    601

    CLASS MARK NOTE: Applying positions AA for the grease are displayed for this section.
    Check if the correct grease is applied for each position.
    GREASE AA

    I2-1
    MECHANICAL REPLACEMENT PARTS LIST
    Location No. TSB P/N Reference No. Description

    101 AE005661 7A701A306A FRONT CABI ASS'Y


    101A AE005662 701WPJC914 CABINET,FRONT
    101B AD301664 713WPA0248 GLASS,LED
    101C AD301663 713WPA0249 GUIDE,REMOCON
    101D AD301657 723549A011 BADGE,BRAND
    101E AE001032 735WPA0779 STOPPER,BUTTON
    101F AE003415 735WPBA950 BUTTON,FRAME

    102 AE005663 A5P311W740 CABINET,BACK ASSY

    103 AE005664 724WNAA005 SHEET,PC


    104 AE005250 761WSA0155 ANGLE,DECK
    105 AE004480 753WUA0069 SPRING,EARTH
    106 AE001035 752WSA0347 SHIELD,CASE
    107 AE001036 755WPA0037 COVER,PCB
    108 AE001037 755WPA0038 COVER,PCB
    109 BZ710699 761WPA0249 HOLDER,FBT

    110 AE005665 761WSA0212 SHIELD,21PIN


    111 BZ710660 741WUA0021 SPRING,EARTH
    112 AE005666 702WSAA126 PLATE,BOTTOM
    113 AE005249 702WSA0213 SHIELD,TOP
    114 AE001042 7230007687 SHEET,JACK
    115 AE005122 726000A073 SHEET,CAUTION
    116 AE001043 735WPA0777 SPACER
    117 AE003417 735WPBB036 BUTTON,POWER
    118 AE003418 743WKAA011 SPRING,TUNER
    119 AD302077 752WSA0333 SHIELD,JACK

    120 AD301370 899EFBA002 WIRING-CLIP


    121 AE003511 774WPA0006 HOLDER,WIRE
    122 AE003419 712WPJC007 PLATE,TRAY-FRONT
    123 AE005667 722549A416 SHEET,RATING
    124 AE005668 723000C812 POP LABEL
    125 AD302158 800WR0A002 SHEET,CRT SUPPORT
    126 AE005669 J5P31107A QUICK SET-UP SHEET
    127 AE005670 723000C790 SHEET,BAR CODE
    128 AE005671 791WHAA124 FILM BAG
    129 AE005926 792WHAA145 PACKAGE,TOP

    130 AE005927 792WHAA144 PACKAGE,BOTTOM


    131 AE005672 793WCDC586 GIFT BOX
    132 AE005673 A5P311W975 INSTRUCTION BOOK KIT
    133 AE005985 JB5KD400 POLYBAG,INSTRUCTION(RED CAUTION)
    134 AE005986 J5P31141A HELPLINE SHEET
    135 AE005970 J5P31117A REGISTRATION CARD
    136 AE005674 J5P31101A INSTRUCTION BOOK

    201 AE005928 8160H50B8U SCREW,TAP TITE(P) W5x28


    202 AE003522 8117540B0U SCREW,TAP TITE(B0) TRUSS 4x20
    203 AE004847 8117540A6U SCREW,TAP TITE(B0) TRUSS 4x16
    204 AE003523 811754080U SCREW,TAP TITE(B0) TRUSS 4x8
    205 AE003524 8109I30A0U SCREW,TAP TITE(B) WH7 3x10
    206 AE005659 8109I3080U SCREW,TAP TITE(B) WH7 3x8
    207 AE003526 810923080U SCREW,TAP TITE(B) BIND 3x8
    208 AE005675 810923060U SCREW,TAP TITE(B) BIND 3x6
    209 AE005541 810F13080U SEMS(F) 3x8

    210 AE003529 811063080U SCREW,TAP TITE(P) BRAZIER 3x8


    211 AE003531 810763080U SCREW,TAP TITE(S) BRAZIER 3x8
    212 AE003532 810723040U SCREW,TAP TITE(S) BIND 3x4
    213 AE003530 811022680U SCREW,TAP TITE(P) BIND 2.6x8

    J1-1
    DVD DECK REPLACEMENT PARTS LIST
    Location No. TSB P/N Reference No. Description

    ! 600 AE005942 A5R801V650 DVD MECHA ASS'Y A5R801V650


    601 AE005003 92P100109A HOLDER,TRAVERSE
    602 AE003550 92P100094A CLAMPER
    603 AE003551 92P100088A GEAR,MOTOR
    604 AE003537 92AAA0013A FEED RACK ASS'Y
    605 AE003538 92P200013A INSULATOR(F)
    606 AE003539 92P200014A INSULATOR(R)
    607 AE005929 92SBB0030A LOADER SUB ASS'Y
    608 AE003541 92P100095A GEAR,PULLEY
    609 AE003542 92P100097A PULLEY,MOTOR

    610 AE003549 92P100096A GEAR,MAIN


    611 AE003544 92P200012A BELT,LOADING
    612 AE003545 92P000014A PLATE,CLAMPER
    613 AE003546 92P100093A RACK,LOADING
    614 AE003547 92P100091A FRAME,MAIN
    615 AE004280 92P100100A TRAY
    616 AE003535 92P100089A RACK,FEED 1
    617 AE003536 92P100090A RACK,FEED 2
    618 AE003543 92P300020A SPRING,RACK FEED
    619 BZ710149 800WFAA008 CUSHION C

    701 AE003530 811022680U SCREW,TAP TITE(P) BIND 2.6x8


    702 AE003554 814011723U SCREW,PAN M1.7x2.3 P3
    703 AE003555 816112080U SEMS.TAP TITE(P) PAN W10 2x8
    704 AE003556 814011730U SCREW,PAN M1.7x3 P3
    705 AE003557 811022080U SCREW,TAP TITE(P) BIND 2x8

    CD2001 AD301855 122H0O1901 CORD JUMPER 2H0O1901


    CD2301 AE003558 122H062102 CORD JUMPER 2H062102
    CD2302 AE003559 122H052601 CORD JUMPER 2H052601
    ! M2602 AE005930 1515S98003 FEED MOTOR BCZ3B03B
    ! M2603 AE005931 1596S18003 MOTOR,LOADING BCZ3B52B
    PCB610 AE005932 A5R801V610 PCB ASS'Y DED003A
    PCB640 AE005933 A5R801V640 PCB ASS'Y DED002B
    SW1 AE003564 0515S32002 SWITCH SSS-13-2
    SW2 AE003565 0500101037 PUSH SWITCH ESE22MH24

    J2-1
    ELECTRICAL REPLACEMENT PARTS LIST
    Location No. TSB P/N Reference No. Description
    RESISTORS
    ! R408 AE005692 R3K58A221J R,METAL OXIDE 220 OHM 2W
    ! R430 AE005693 R3K58A331J R,METAL OXIDE 330 OHM 2W
    ! R447 BZ210021 R65582680J R,FUSE 68 OHM 1/2W
    ! R448 AE005687 R3K581102J R,METAL OXIDE 1K OHM 1W
    ! R450 AE005699 R638814R7J R,FUSE 4.7 OHM 1W
    R665 AE000485 R002T4391J RC 390 OHM 1/4W
    ! R802 AE005689 R3K581153J R,METAL OXIDE 15K OHM 1W
    ! R805 AE005689 R3K581153J R,METAL OXIDE 15K OHM 1W
    ! R810 AE005689 R3K581153J R,METAL OXIDE 15K OHM 1W
    ! R3035 AE005688 R3K581120J R,METAL OXIDE 12 OHM 1W
    R3050 AE000901 R00202220J RC 22 OHM 1/2W
    ! R3801 BZ210206 R002T2155J RC 1.5M OHM 1/2W
    ! R3803 AE001075 R5X34E5R6J R,CEMENT 0 5.6 OHM 7W
    ! R3805 AE005690 R3K581R33J R,METAL OXIDE 0.33 OHM 1W
    ! R3806 AE005735 R63881R22J R,FUSE 0.22 OHM 1W
    ! R3812 AE003981 R002T2680J RC 68 OHM 1/2W
    ! R3813 AE005694 R3K58B104J R,METAL OXIDE 100K OHM 3W
    ! R3819 AE005696 R3K58BR22J R,METAL OXIDE 0.22 OHM 3W
    ! R3823 AE005695 R3K58B1R5J R,METAL OXIDE 1.5 OHM 3W
    ! R3827 AE005276 R3K58AR82J R,METAL OXIDE 0.82 OHM 2W
    CAPACITORS
    C405 BZ110101 E5EZF3222M CE 2200 UF 25V
    C421 BZ110055 E5EZF4102M CE 1000 UF 35V
    C423 BZ110174 P4J7F3334J CMPP 0.33 UF 250V PMS
    C424 AE001322 P4N8FJ842H CMPP 0.0084UF 1.25KV
    C450 AE000029 C0PLRR7H2K CC 220 PF 2KV R
    C801 BZ110226 C0JBB07H3K CC 0.0022UF 2KV B
    C3012 BZ110154 E02L00102M CE 1000 UF 6.3V
    C3027 AE003427 CQG0B04H3K CC 0.0022UF 50V B
    ! C3801 BZ110025 P2122B224M CMP 0.22 UF 275V ECQUL
    C3804 BZ110181 C03L0R7H3K CC 0.0022UF 2KV R
    C3807 BZ110172 C03L0R7U2K CC 680 PF 2KV R
    C3809 BZ110219 C0PLRR7Q2K CC 470 PF 2KV R
    C3810 BZ110219 C0PLRR7Q2K CC 470 PF 2KV R
    C3814 BZ110251 E52D0H221M CE 220 UF 400V
    C3817 BZ110038 C0JFE0514M CC 0.01 UF 500V E
    C3818 AE000029 C0PLRR7H2K CC 220 PF 2KV R
    ! C3822 BZ110222 CD39E0MH3M CC 0.0022UF 250V
    C3829 BZ110252 C0J0B05Q2K CC 470 PF 500V B
    C3831 BZ110130 E62NFC221M CE 220 UF 200V
    C3832 BZ110129 E5EZF2222M CE 2200 UF 16V
    C3835 BZ110101 E5EZF3222M CE 2200 UF 25V
    C3836 AE001065 E5EZ01222M CE 2200 UF 10V
    C3842 BZ110135 E02L02222M CE 2200 UF 16V
    DIODES
    D101 BZ410087 0021E2Q140 LED LTL-1CHEE-002A
    D102 BZ410020 D97U05R11B DIODE,ZENER MTZJ5.1B T-77
    D103 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D104 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D105 BZ410085 D2WXN40050 DIODE,SILICON 1N4005-EIC
    D107 BZ410037 D97U03301B DIODE,ZENER MTZJ33B T-77
    D108 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D110 BZ410021 D97U05R61B DIODE,ZENER MTZJ5.6B T-77
    D111 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D112 BZ410020 D97U05R11B DIODE,ZENER MTZJ5.1B T-77
    D113 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D117 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D403 BZ410043 D2WT011E10 DIODE,SILICON 11E1-EIC
    D404 BZ410043 D2WT011E10 DIODE,SILICON 11E1-EIC
    D405 BZ410043 D2WT011E10 DIODE,SILICON 11E1-EIC
    D406 BZ410043 D2WT011E10 DIODE,SILICON 11E1-EIC
    D407 BZ410043 D2WT011E10 DIODE,SILICON 11E1-EIC
    D411 AD300731 D2WXN49370 DIODE,SILICON 1N4937
    D413 AD300731 D2WXN49370 DIODE,SILICON 1N4937
    D602 AD300731 D2WXN49370 DIODE,SILICON 1N4937
    D603 BZ410043 D2WT011E10 DIODE,SILICON 11E1-EIC
    D604 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D801 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D802 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D803 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D2601 BZ410121 DDARDS1200 DIODE,SILICON KDS120RTK
    D3001 BZ410085 D2WXN40050 DIODE,SILICON 1N4005-EIC
    D3004 BZ410021 D97U05R61B DIODE,ZENER MTZJ5.6B T-77
    D3005 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D3006 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D3008 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D3009 BZ410010 D28T21DQN9 DIODE,SCHOTTKY 21DQ09N-TA2B1

    J3-1
    ELECTRICAL REPLACEMENT PARTS LIST
    Location No. TSB P/N Reference No. Description
    DIODES
    D3012 BZ410085 D2WXN40050 DIODE,SILICON 1N4005-EIC
    D3801 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    ! D3802 BZ410062 D2WTRM11C0 DIODE,SILICON RM11C-EIC
    ! D3803 BZ410062 D2WTRM11C0 DIODE,SILICON RM11C-EIC
    ! D3804 BZ410062 D2WTRM11C0 DIODE,SILICON RM11C-EIC
    ! D3805 BZ410062 D2WTRM11C0 DIODE,SILICON RM11C-EIC
    D3806 AD300731 D2WXN49370 DIODE,SILICON 1N4937
    D3807 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D3808 BZ410080 D2WXRU2AM0 DIODE,SILICON RU2AM-EIC
    D3809 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    D3812 BZ410021 D97U05R61B DIODE,ZENER MTZJ5.6B T-77
    ! D3813 BZ410080 D2WXRU2AM0 DIODE,SILICON RU2AM-EIC
    D3814 BZ410006 D1VT001330 DIODE,SILICON 1SS133T-77
    ! D3815 BZ410010 D28T21DQN9 DIODE,SCHOTTKY 21DQ09N-TA2B1
    ! D3819 AE002498 D2LKB340F0 DIODE,SCHOTTKY SB340FL-6737
    ! D3820 AE001064 D28F31DQ09 DIODE,SCHOTTKY 31DQ09-FC
    D3821 AE001064 D28F31DQ09 DIODE,SCHOTTKY 31DQ09-FC
    ! D3823 AD300731 D2WXN49370 DIODE,SILICON 1N4937
    D3824 BZ410094 D97U01501B DIODE,ZENER MTZJ15B T-77
    D4001 BZ410086 DD7R0S3550 DIODE,SILICON 1SS355 TE-17
    D4207 AD300070 D97U01201B DIODE,ZENER MTZJ12B T-77
    D8111 BZ410086 DD7R0S3550 DIODE,SILICON 1SS355 TE-17
    D8112 BZ410086 DD7R0S3550 DIODE,SILICON 1SS355 TE-17
    ICS
    IC101 AE003428 I5PD0F017A IC OECF017A
    IC102 AD301641 I9UF032310 IC PST3231NR
    IC199 AE005685 A5P311W255 INIT DATA BR24L08F-WE2
    ! IC301 AE001068 I0FSP7523N IC AN7523N
    ! IC302 AE001068 I0FSP7523N IC AN7523N
    IC401 BZ611081 I0WTD81740 IC TDA8174A
    IC601 AE002386 I0WDE2246H IC STV2246H
    IC602 AE001069 I0UF015020 IC MM1502XNRE
    IC2301 AE003581 I03F065650 IC LA6565-TE-L-E
    IC2601 AE002837 ICQK067080 IC ZR36708TQC
    ! IC3001 AE001070 I1KA98R06A IC KIA78R06API
    IC3002 AE001066 I03F6324N0 IC LA6324NML-TE-L
    ! IC3801 AE000604 I2BT068530 IC STR-W6853
    ! IC3804 AE002809 000220002W PHOTO COUPLER PS2561AL1-1-V(W)
    IC4001 AE003586 ICQK06762V IC ZR36762PQCG_V
    IC4002 AE005421 I57J0L02F0 IC BR24L02F-WE2
    IC4005 AE005215 IFLJ0632H7 IC K4S641632H-UC75
    IC4006 AE004241 I1HF9117L0 IC SIP1117L-ADJ-TP
    IC4007 AE005736 S5P311WF01 MEMORY DATA SST39VF800A-70-4C-EKE
    IC4201 AE001295 I0QJ045800 IC NJM4580M(TE1)
    IC4202 AE001067 I07S0644AN IC BA7644AN
    IC4203 AE001067 I07S0644AN IC BA7644AN
    IC4204 AD301988 I0UF015010 IC MM1501XNRE
    IC4205 AD301988 I0UF015010 IC MM1501XNRE
    IC4206 AD301988 I0UF015010 IC MM1501XNRE
    IC8102 AE003584 I17F017530 IC PCM1753DBQR
    TRANSISTORS
    Q101 AE005938 TNRAC05003 COMPOUND TRANSISTOR RT1N241C-T1
    Q102 AE005938 TNRAC05003 COMPOUND TRANSISTOR RT1N241C-T1
    Q103 AE005872 T6RA015300 TRANSISTOR,SILICON 2SA1530A-T1
    Q301 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q303 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q304 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q405 BZ510097 TCAT03227Y TRANSISTOR,SILICON KTC3227_Y-AT
    ! Q406 AE000656 TC1G058850 TRANSISTOR,SILICON 2SC5885
    Q605 BZ510114 T8AA03881S TRANSISTOR,SILICON KTC3881S-RTK
    Q606 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q607 AE005941 TPRAB05002 COMPOUND TRANSISTOR RT1P141C-T112-1
    Q608 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q609 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q610 AE005872 T6RA015300 TRANSISTOR,SILICON 2SA1530A-T1
    ! Q804 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC
    ! Q805 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC
    ! Q806 BZ510009 TC3F042170 TRANSISTOR,SILICON 2SC4217(D,E)-RAC
    Q2601 BZ510112 T67J1036K0 TRANSISTOR,SILICON 2SA1036KT146
    Q2602 AE003592 T67J048TL0 TRANSISTOR,SILICON 2SA2048TL
    Q2603 BZ510113 T27T030180 FET 2SK3018T106
    Q2604 BZ510113 T27T030180 FET 2SK3018T106
    Q2605 BZ510113 T27T030180 FET 2SK3018T106
    Q3001 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q3002 BZ510073 TAATA12660 TRANSISTOR,SILICON KTA1266-AT(Y,GR)
    ! Q3003 AD301934 TBA0013660 TRANSISTOR,SILICON KTB1366(O,Y)
    Q3004 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1

    J3-2
    ELECTRICAL REPLACEMENT PARTS LIST
    Location No. TSB P/N Reference No. Description
    TRANSISTORS
    ! Q3005 AD301934 TBA0013660 TRANSISTOR,SILICON KTB1366(O,Y)
    Q3006 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q3007 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    ! Q3008 AE002534 TBA0011510 TRANSISTOR,SILICON KTB1151
    Q3009 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    ! Q3010 BZ510060 TB3T011310 TRANSISTOR,SILICON 2SB1131(S,T)-AE
    ! Q3011 BZ510105 TCAT03209Y TRANSISTOR,SILICON KTC3209_Y-AT
    Q3012 AE005938 TNRAC05003 COMPOUND TRANSISTOR RT1N241C-T1
    ! Q3013 BZ510057 TAAT01281Y TRANSISTOR,SILICON KTA1281_Y
    Q3014 AE005938 TNRAC05003 COMPOUND TRANSISTOR RT1N241C-T1
    Q3801 BZ510070 TCAT032034 TRANSISTOR,SILICON KTC3203_Y-AT
    Q3805 BZ510069 TCATC31980 TRANSISTOR,SILICON KTC3198-AT(Y,GR)
    Q3806 BZ510030 TA3T01624E TRANSISTOR,SILICON 2SA1624E-AA
    Q4004 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q4201 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q4202 AE005872 T6RA015300 TRANSISTOR,SILICON 2SA1530A-T1
    Q4203 AE005939 TNRAD05002 COMPOUND TRANSISTOR RT1N441C-T1
    Q4208 AE005872 T6RA015300 TRANSISTOR,SILICON 2SA1530A-T1
    Q4209 AE005938 TNRAC05003 COMPOUND TRANSISTOR RT1N241C-T1
    Q4210 AE005940 TPRAA05002 COMPOUND TRANSISTOR RT1P431C-T112-1
    Q4211 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q4212 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q4213 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q4214 AE005873 T8RA030520 TRANSISTOR,SILICON 2SC3052-T1
    Q8102 AE005872 T6RA015300 TRANSISTOR,SILICON 2SA1530A-T1
    Q8103 AE005872 T6RA015300 TRANSISTOR,SILICON 2SA1530A-T1
    Q8104 AE005872 T6RA015300 TRANSISTOR,SILICON 2SA1530A-T1
    COILS &TRANSFORMERS
    L101 BZ310141 02167F100J COIL 10 UH
    L102 BZ310141 02167F100J COIL 10 UH
    L103 BZ310141 02167F100J COIL 10 UH
    L301 BZ310124 02AHA896A1 CORE,FERRITE W5T18.4X10X9.6
    L302 BZ310124 02AHA896A1 CORE,FERRITE W5T18.4X10X9.6
    L401 BZ310004 021679472K COIL 4.7 MH
    L402 AE000020 022800033A COIL,LINEARITY 20416A
    L603 BZ310049 021LA6R22M COIL 0.22 UH
    L604 BZ310077 021LA61R0M COIL 1 UH
    L606 BZ310141 02167F100J COIL 10 UH
    L608 AE000290 02167F3R3J COIL 3.3 UH
    L609 AE000773 021LA6120J COIL 12 UH
    L610 BZ310148 033700005R COIL,VIDEO IFT 3700005
    L611 BZ310041 02167F101J COIL 100 UH
    L801 AE001054 021673820K COIL 82 UH
    L3001 BZ310150 02167E220K COIL 22 UH
    ! L3800 BZ310155 028R140018 COIL,DEGAUSS 8R140018
    ! L3801 AE000571 029X000109 COIL,LINE FILTER SS28V-K10410
    L3803 BZ310181 02A6B2E0A1 CORE,FERRITE HF70T22*10*14
    L4001 BZ310191 02167F2R2J COIL 2.2 UH
    L4002 BZ310118 02AHB9A972 CORE,FERRITE W5T29X7.5X19
    L4201 BZ310041 02167F101J COIL 100 UH
    L4202 BZ310041 02167F101J COIL 100 UH
    L4205 BZ310056 021673102K COIL 1 MH
    L8102 AE000828 02167F1R0K COIL 1 UH
    L8103 AE000828 02167F1R0K COIL 1 UH
    L8104 AE000828 02167F1R0K COIL 1 UH
    T401 BZ310157 045009003J TRANS,HORIZONTAL DRIVE ETH09K14BZ
    ! T3801 AE001055 0481300064 TRANSFORMER,SWITCHING 81300064
    JACKS
    ! J801 BZ614434 066F120018 SOCKET,CATHODE RAY TUBEISMS01S
    J4201 AE003568 060J401102 RCA JACK MSP-251V-05NI-FE-LF
    J4202 AE003431 060J131016 HEADPHONE JACK MSJ-2000_AG
    J4203 AE002949 060J421036 RCA JACK MTJ-032-05A-30-FE
    J4204 AE002950 060J421037 RCA JACK MTJ-032-05A-32-FE
    J4205 AE002951 060J421030 RCA JACK MTJ-032-05A-31-FE
    J4206 AE002430 063D100050 SOCKET,21PIN MRC-021V-07_A
    SWITCHES
    SW2201 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2202 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2204 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2206 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2207 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2208 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2209 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2210 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    SW2211 BZ612010 0504101T34 SWITCH,TACT EVQ21505R
    ! SW3801 AE000022 0530105018 SWITCH ESB92S23B

    J3-3
    ELECTRICAL REPLACEMENT PARTS LIST
    Location No. TSB P/N Reference No. Description
    VARIABLE RESISTORS
    VR401 AE000038 V1K62Q2BT8 VOLUME,SEMI FIXED NVG6THTB471
    VR402 BZ210255 V1K62H3BT8 VOLUME,SEMI FIXED NVG6THTB222
    VR3801 BZ210265 V1K63Q2BTE VOLUME,SEMI FIXED NVG6TLTAB471
    P.C.BOARD ASSEMBLIES
    PCB110 AE005682 A5P311W110L PCB ASS'Y CCD003A
    PCB130 AE005683 A5P311W130L PCB ASS'Y DMD008A
    PCB250 AE005684 A5P311W250L PCB ASS'Y CMD006A
    MISCELLANEOUS
    ANT001 BZ614468 125C500025 ANTENNA,LOOP 180PRA-PP-01
    B402 BZ310121 024HT03553 CORE,BEADS W5RH3.5X5X1.0
    B403 BZ310121 024HT03553 CORE,BEADS W5RH3.5X5X1.0
    B2601 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B2602 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B2603 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B2604 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B2605 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B3801 BZ310121 024HT03553 CORE,BEADS W5RH3.5X5X1.0
    B3802 BZ310121 024HT03553 CORE,BEADS W5RH3.5X5X1.0
    B4001 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4002 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4003 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4004 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4005 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4006 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4007 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4008 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4010 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    B4201 BZ310121 024HT03553 CORE,BEADS W5RH3.5X5X1.0
    B8103 BZ310186 024HC31022 CORE,BEADS FCM2012H-102T04
    BT001 AE000012 1412004008 BATTERY,MANGAN R03(AB)E_2P_G
    BT002 AE000012 1412004008 BATTERY,MANGAN R03(AB)E_2P_G
    CD301 AE005679 06CU122501 CORD,CONNECTOR CU122501
    CD302 AE005679 06CU122501 CORD,CONNECTOR CU122501
    CD401 AE005678 06CH01801A CORD,CONNECTOR CH01801A
    CD402 AE000585 06CUG06001 CORD,CONNECTOR CUG06001
    CD403 AE000585 06CUG06001 CORD,CONNECTOR CUG06001
    CD802 BZ614404 WDL6032038 FLAT CABLE AWM2468 AWG26 6C BLACK 320MM
    CD803 BZ614340 WBL6028038 FLAT CABLE AWM2468 AWG26 4C BLACK 280MM
    CD805 BZ614175 06CU82039A CORD,CONNECTOR SM1098-009-1A
    CF602 BZ613010 1012T04101 FILTER,CERAMIC TRAP MKT41.5MA110P
    CF606 BZ613039 102E239R5B FILTER,SAW J1951M
    CF609 AE000945 1012T6R014 FILTER,CERAMIC TRAP TPSRA6M00B00-A0
    CP101 BZ614242 069S260629 CONNECTOR PCB SIDE A2001WV2-6P
    CP301 AE005936 069W120459 CONNECTOR PCB SIDE 213213102W1
    CP302 AE005936 069W120459 CONNECTOR PCB SIDE 213213102W1
    CP402 BZ614303 069S450089 CONNECTOR PCB SIDE A1561WV2-A5P
    CP801 BZ614269 069S320010 CONNECTOR PCB SIDE A2361WV2-2P
    CD3802 BZ614327 06CUU23001 CORD,CONNECTOR CUU23001
    ! CD3803 AE001060 1206435801 CORD,AC BUSH 6435801
    CD4002 AE003573 06CU2B2201 CORD,CONNECTOR CU2B2201
    CD8101 AE003576 122F0C1602 CORD,JUMPER 2F0C1602
    CP2601 AE001710 069GYOT079 CONNECTOR PCB SIDE 09-5000-024-001-006
    CP2602 AE005934 069EV53030 CONNECTOR PCB SIDE 00_6232_005_006_800+
    CP2603 AE005935 069EV63030 CONNECTOR PCB SIDE 00_6232_006_006_800+
    CP3801 BZ614283 069S420110 CONNECTOR PCB SIDE A1561WV2-2P
    CP3802 BZ614176 069S320419 CONNECTOR PCB SIDE A3963WV2-3PD
    CP8001 BZ614214 069S2B0629 CONNECTOR PCB SIDE A2001WV2-11P
    CP8002 AD301797 069J7C0029 CONNECTOR PCB SIDE IMSA-9604S-12Z14
    CP802A BZ614333 067U006049 WIRE HOLDER B2013H02-6P
    CP802B BZ614333 067U006049 WIRE HOLDER B2013H02-6P
    CP803A BZ614334 067U004029 WIRE HOLDER B2013H02-4P
    CP803B AE001056 069R240589 CONNECTOR PCB SIDE 52147-0410
    CP8101 AD301798 069J7C0019 CONNECTOR PCB SIDE IMSA-9604S-12Z13
    EL001 BZ614044 124120301A EYE LET XRY20X30BD
    EL002 BZ614043 124116281A EYE LET XRY16X28BD
    ! F3801 AE001059 080NT05004 FUSE 50T050H
    ! FB401 AE005737 043214058F TRANSFORMER,FLYBACK FNI14B001_M
    FH3801 AE002634 06710T0009 HOLDER,FUSE EYF-52BCY
    FH3802 AE002634 06710T0009 HOLDER,FUSE EYF-52BCY
    NR4001 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E
    NR4002 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E
    NR4003 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E
    NR4004 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E
    NR4005 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E
    NR4006 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E
    NR4007 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E
    NR4008 AE005937 110P4470M4 R,NETWORK 4D03WGJ0470T5E

    J3-4
    ELECTRICAL REPLACEMENT PARTS LIST
    Location No. TSB P/N Reference No. Description
    MISCELLANEOUS
    OS101 BZ614199 077Q004017 REMOTE RECEIVER PIC-37243SR
    ! RY3801 AD300114 0560V20115 RELAY ALKS321
    SP301 AE005680 070Z533030 SPEAKER TC4070E001-0109C
    SP302 AE005680 070Z533030 SPEAKER TC4070E001-0109C
    TM101 AE005681 076D0KS010 TRANSMITTER ORT203N1204424-U
    ! TU101 AE005677 0144507040 TUNER,UHF TUWRF4EK-710F2
    ! TH3801 BZ410050 D8R0A140M0 DEGAUSS ELEMENT PTDAA1BF140M200
    ! V801 BZ614442 098Y1404C8 CRT W/DY A34JXV70X73N45
    X101 AE000295 100CT4R013 CRYSTAL HC-49/U-S
    X601 BZ613024 100CT4R408 CRYSTAL HC-49/U
    X4001 AD301803 100BT02701 CRYSTAL HC-49U/S

    RESISTOR
    RC................... CARBON RESISTOR

    CAPACITORS
    CC................... CERAMIC CAPACITOR
    CE................... ALUMI ELECTROLYTIC CAPACITOR
    CP................... POLYESTER CAPACITOR
    CPP.................. POLYPROPYLENE CAPACITOR
    CPL.................. PLASTIC CAPACITOR
    CMP................... METAL POLYESTER CAPACITOR
    CMPL................ METAL PLASTIC CAPACITOR
    CMPP................ METAL POLYPROPYLENE CAPACITOR

    J3-5
    TOSHIBA VIDEO PRODUCTS PTE. LTD.
    438B ALEXANDRA ROAD, BLOCK B #06-01 ALEXANDRA TECHNOPARK SINGAPORE 119968

    You might also like