Pac Ex

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

Pac Ex.

Tracking down explosion hazards

ST-217-2000
Its sturdiness and easy operation in
combination with its versatility make
Pac Ex the ideal Ex-monitor for
– fire brigades
– the chemical industry
– the oil and gas industry
– municipal supply
– disposal companies
– telecommunication enterprises.

Pac Ex + + + robust + + + easy operation

Pac Ex is a rechargeable gas detection


instrument for continuous measurement
and monitoring of combustible gases or
vapours in ambient air within the range
of the lower explosion limit (LEL) and for
methane up to 100% by volume.

It is equally suitable for both personal


measurement and monitoring of working
areas. The operation time with a fully
charged battery is approx. 10 hours.

The simple mechanical structure of the


device provides for easy change of the
rechargeable NiCd battery. The change
of the sensor is just as simple. After
opening the housing the old plug-in
sensor can easily be removed from the
printed circuit board and the new
sensor can easily plug in.
2-692-94

2
2-1224-92
+ + + extensive range of accessories + +

2-604-93

3
Adjustable features

Due to a multitude of user-friendly


features and accessories the device
can easily be adapted to a great
number of applications. Three clearly
arranged pushbuttons provide for
adjustment of the different features
and operation of Pac Ex.

The user can take advantage of the Adjustable features Remark


following device features on site:
Calibration – in the LEL range the unit can be calibrated to
– acknowledgement of concentration
various gases and vapours
pre-alarm
– in the % by vol. range it can only be calibrated
– clearing of concentration main alarm
to methane
when gas concentration has fallen
below main alarm threshold 2 adjustable alarm thresholds – the alarm thresholds can be set to any value
– display test and display back- (pre-alarm and main alarm) within the measuring range, provided that
lighting per measuring range the pre-alarm threshold is always lower than
– display of remaining battery or equal to the main alarm threshold
capacity in 10% stages. Operating signal – when switched on the unit gives an audible
or visual signal every 5 seconds
The serviceman, or whoever is
Switch-off protection – during operation the instrument cannot be
responsible for the equipment, can
accidentally switched off by means of the
also set many of the device's functions
pushbuttons
by entering a 3-character password.
The functions are listed in the Measurement without indication – unit only gives alarm
following table. Easy switch-over between the – during operation switch-over to other
measuring ranges % LEL and measuring range is possible
methane (% by vol.)
using pushbuttons
peak holding mode – the peak value is displayed until this mode is
deactivated
Semi-automatic zero adjustment – in the measuring range chosen the zero
after disconnection from point can be adjusted by pressing the
the charger ENTER key
Indication of CH4 on the display – when calibrated to methane CH4 is shown
on the display
user-specific password – the three-digit password can be changed to
enable a tamper proof unit

4
diffusion inlet

plug-in sensor

optical alarm

integrated acoustic alarm

CH4 illuminated backlit display


ALARM %LEL
BAT %UEG
A1 VOL%
A2

PCB and microprocessor

operation key pads

NiCd-battery and electronics

housing of glass fibre reinforced plastic,


sealed against water and dust (IP 55)

signal stripes

metal clip

5
1-247-92
Technical Data Size appr. 142 x 66 x 27 mm (5.6 x 2.6 x 1.1 in.)
Weight appr. 370 g
Measuring ranges 0 to 100% LEL, resolution 1% LEL
(different gases and vapours)
0 to 5% by vol. CH4, resolution 0,01% by vol.
5 to 100 % by vol. CH4, resolution 1% by vol. CH4
% by vol. autoranging
Display LCD, backlit (short time/continuously)
Power supply NiCd battery, replaceable
Response time t20 < 2 s
t50 < 6,5 s
t90 < 20 s
Operation time appr. 10 hours
Charging time appr. 8 hours
Battery control display of remaining battery charge,
deep discharge protection, overcharge protection
Alarms 2 adjustable alarm thresholds,
both in the %-LEL range and the % by vol. range
ex-factory set:
– LEL-range: 10% LEL/20% LEL
– % by vol.-range: 1% by vol./2% by vol.
Sound volume of horn > 85 dB(A), in a distance of 30 cm
Operating temperature -20 °C to 55 °C (-4 °F to 131 °F)
Ingress protection IP 55 (certified by TÜV Südwest)
Intrinsic safety EEx ib IIC T4 (measuring unit)
Approvals Germany BVS Ex s IIC T4
EX S I
UK (SIRA) SCS Ex ib s IIC T4
Canada (CSA) Ex ia, Class I,
Groups A, B, C, D, T4
C22.2 No. 152
Australia AUS Ex 3306 X, Ex ias T4

6
Order List
Pac Ex 83 13 010 Leather bag 83 12 887
Pac Ex Set 68 08 448 with shoulder straps
comprising Pac Ex
single charginging module,
plug-in charger

2-109-96
2-45-95
Accessories Calibration and pump adapter 68 06 291
Single charger
comprising
plug-in charger 100-240 VAC 83 15 635

2-363-95
and single charging module 83 13 420

2-357-95
Set for float probe
Double charger comprising
comprising electrically conductive hose 11 80 681
plug-in charger 100-240 VAC 83 15 635 and float probe 68 02 337

2-364-95
2-358-95
and charging module 83 12 246
for two units
Multi-charger Spare battery pack 83 12 478
comprising
power pack BRD 83 10 558

2-359-95
and up to 4 charging 83 12 246
modules for two units

2-365-95
Car and single charger
standard version
comprising Spare sensor Cat-Ex 83 12 487
car adapter (12V/24V) 83 12 645
and single charging module 83 13 420
2-367-95

2-223-96
Car and single charger
robust version Rubber boot 83 15 633
comprising
car adapter (12V/24V) 83 12 645
single charging module 83 12 420
2-368-95

and additional metal housing 83 13 471

Car charger individual


Single charger 83 13 471
with additional metal housing 83 13 420
and fixed electrical installation
2-369-95

Hand pump 68 01 933


2-361-95

Smart Pump 83 13 832


1-277-95

Telescopic probe, complete 83 13 028


2-371-95

Belt bag 83 13 660


2-362-95

7
Dräger Safety AG & Co. KGaA
Revalstrasse 1
D-23560 Luebeck
Germany
Tel. +49 451 882 - 0
Fax +49 451 882 - 20 80
www.draeger-safety.com

DrägerService Dräger Expertise


Dräger equipment must always Since 1889, Dräger has had an outstanding reputation
be fully operational and safe. for solving problems in the field of human breathing.
DrägerService offers a regular Dräger has been deeply involved in the handling of
inspection service and isquickly gases, in particular hazard protection and the saving
available in the event of mal- of life in medical and industrial emergencies.
function. Your equipment will Many of the company's 9400 employees are active in
be repaired and back in operation research and innovation to ensure that the latest
as quickly as possible. Dräger- techniques and scientific advances are fully tested
Service facilitates the vital flow of before their inclusion in new equipment.
information between client and
manufacturer.

90 45 660 / PB / 032 / H-NR-ED / Market communications ST / Printed in Germany / chlorinefree – ecological / Subject to modifications!
Dräger Worldwide
The Dräger sales and service Dräger has subsidiaries in the following countries:
organisation is spread through- Australia, Austria, Belgium, Bulgaria, Canada,
out the world. It comprises more China, Croatia, Czech Republic, Denmark, France,
than 25 subsidiaries and associ- Great Britain, Hungary, Indonesia, Italy, Japan,
ated companies to ensure that the Netherlands, Norway, Romania, Singapore,
Dräger is always within easy Slovenia, Slowakia, South Africa, Spain, Sweden,
reach of its clients and in close Switzerland, Thailand, Yugoslavia, USA.
contact with all important Additionally, Dräger is widely represented in
markets. Dräger's ever increasing Central and South America, Africa, the Middle East,
market share demonstrates the the Far East and Eastern Europe.
company's international
competitiveness and strength.

Quality and Environmental Management


Our mission includes the continuous
improvement of our Quality and
Environmental Management Systems
in accordance with ISO 9001 and
ISO 14001.

You might also like