This document provides a lifting plan worksheet for lifting equipment and materials. It requires information such as a description of the work, location, approvals, equipment used, rigging details, calculations of the lift including weight and capacity percentages, and diagrams. Attachments must include a lifting area diagram, load chart for cranes, and rigging plan. The plan is reviewed by an engineer in charge and approved by heads of department.
This document provides a lifting plan worksheet for lifting equipment and materials. It requires information such as a description of the work, location, approvals, equipment used, rigging details, calculations of the lift including weight and capacity percentages, and diagrams. Attachments must include a lifting area diagram, load chart for cranes, and rigging plan. The plan is reviewed by an engineer in charge and approved by heads of department.
This document provides a lifting plan worksheet for lifting equipment and materials. It requires information such as a description of the work, location, approvals, equipment used, rigging details, calculations of the lift including weight and capacity percentages, and diagrams. Attachments must include a lifting area diagram, load chart for cranes, and rigging plan. The plan is reviewed by an engineer in charge and approved by heads of department.
This document provides a lifting plan worksheet for lifting equipment and materials. It requires information such as a description of the work, location, approvals, equipment used, rigging details, calculations of the lift including weight and capacity percentages, and diagrams. Attachments must include a lifting area diagram, load chart for cranes, and rigging plan. The plan is reviewed by an engineer in charge and approved by heads of department.
Date 02.02.16 Corporate Standard Rules & Procedure Sub-Committee Standard Document No. CSRP/10 Procedure - Lifting & Shifting of Revision No. 01 (04.08.2017) Equipment & Material Page No. Page 76 of 91
Lifting Plan Worksheet
Note: Approved copy to be submitted to UIC Crane Champion.
Description of Work.: Location:
Approved(HOD) By: Date:
Prepared By: Date: `
Equipment Used:
Name of Contractor/Crew Making Lift:
Name of Rigger:
Name of Signal Man:
PERMIT NO:
Equipment and Load Information:
A. Maximum Operating Radius
B. Boom Length
C. Clearance Between Boom and Load
D. Clearance to Surrounding Facilities
E. Clearance to High Voltage Lines
( ) HINDUSTAN ZINC LTD
Date 02.02.16 Corporate Standard Rules & Procedure Sub-Committee Standard Document No. CSRP/10 Procedure - Lifting & Shifting of Revision No. 01 (04.08.2017) Equipment & Material Page No. Page 77 of 91
F. Stability of Ground under Crane /Outriggers
G. Extra Blocking/Matting Needed
H. Maximum Allowable Wind
I. Illumination level at site in night
Calculations: I. SWL from Load Chart)
J. Weight of Load
K. Weight of Block & Rigging
L. Total Lift Weight (J+K)
M. (L/I*100%)
N Classification of Lift
Attachments:
Lifting Area Diagram (Plot plan of the lifting area / ea/Sketch of the area indicating the adjacent facilities to lift area like pipe rack, towers, tanks or other conflicting equipments) .
Load Chart (for all Cranes used) .
Annexure 3 & DRY run Comments
Name of Crane Operator Signature of Engineer In charge
Signature of HOD HINDUSTAN ZINC LTD
Date 02.02.16 Corporate Standard Rules & Procedure Sub-Committee Standard Document No. CSRP/10 Procedure - Lifting & Shifting of Revision No. 01 (04.08.2017) Equipment & Material Page No. Page 61 of 91
Annexure 3 Equipment Handling Checklist
Equipment Detail Tools & Tackles
Plant D-Shackles capacity Equipment Tag No Sling size & capacity Net Weight to be lifted(MT) Chain Block capacity Exact Dimensions Tools & Tackles tested and valid documents available. Y/N LxBxH/Dia Lifting Height Crane Detail Ground Preparation Make & Model of Crane Ground preparation with Operating radius (m) MS Plate Y/N Max Operating Boom Length (m) Wooden Sleepers Y/N Load Capacity at operating As per calculation radius & boom %age Loading Of Crane
Piping, Electrical Cable & Structure Rigging /Lifting Plan
Fouling What will be the minimum Attach the schematic rigging clearance from piping, Electrical plan Cables & structure & other adjoining equipment? (See the equipment layout drawing) HINDUSTAN ZINC LTD
Date 02.02.16 Corporate Standard Rules & Procedure Sub-Committee Standard Document No. CSRP/10 Procedure - Lifting & Shifting of Revision No. 01 (04.08.2017) Equipment & Material Page No. Page 62 of 91
is applicable ) YES/NO YES/NO YES/NO YES/NO YES/NO YES/NO YES/NO YES/NO Is there any Physical Damage? Is SWL marked? Is test date and due date is marked? Is Hook with Safety Latch provided Is slings padded or protected from the sharp edges of their loads ?
Date:
(Concerned Engineer) (Contractor Supervisor)
(SBU/ HOD/ Project In-charge)
---------------------------------------------------------------------------------------------- To be filled before starting the job & should be available at site with operator Format to be filled/signed preferably at site or after visit to site. Sectional Head in consultation with HOD will decide about criticality of lift and refer the matter to Crane champion. This form will not overrule any other permit or safe working practices. ANURODH PRASHANTI FIE (Mech.). M.B.A., M. Tech. Ph.D. (Pur.), DIS, ASNDT-II, Dy. Mgr. (Mech ) HZL (Regd ) AGM-CNFC Delhi GSTIN 08AHXPS6327A1ZY Life Member. NSC, IE() Kolkata, ISTD DELHI. "Chartered Engineer (India), Engg. Projects Valuer, Lead(Regd ) OHSAS Auditor "Engg. Compt. Pressure Equipment, Lifting M/C &Tools (Gov. of Raj) Etemal Audtor: Fre &Safety, SystemImprover. Heavy Industrial Structural Feb, &Erect | Bank Dotall: 10B1 BankAlc 050104000047825,1F9Code 1BKLO00119 824, Sector 4, Hiran Magri, Udaipur (Ral) Pin 313 002 Ph: 0204.2460860, Moble 09414769018/07728059018 Emalil a prashant@redifimailcom, PAN-AHXPS6327A
Certilicate No. .P./LD/2021 Date: 94 April 2021
REPORT OF EXAMINATION OF LIFTING MACHINES/TACKLES & HOISTS
(Under seetion 29 of the factories Act, 1948 &rulesmade theunder) Name of occupier (or factory) M/s Laxmi lal Dangi, Address ol occupicr 376, Sector-6, Hiran Magri, Udaipur, Rajasthan 3. Full Description of Equip.: Mobile Crane, with telescopic boom, RJ-39-EA-0726, Chassis No.LSE6H5D37MA001 804, Eng. No- 1620LI 10245, Model-zrc 800V.
4. Capacity: 80 Ton 5. Manufacturer: M/s ZOOMLION 6. Location: Any where Rajasthan. 7. Date when machine was first taken in use Year-02/2021 8. Date of examination under rule (1) 04th April 2021 & (7) of 57 A 9. Name of examiner who issued certificate A.PRASHANT 10.Date of periodical examination made under clause (a) (iii) sub section () section 29 of the act & sub rule (6) & by whom. name & address I1Date of repair. change of wire rope under sub NO REPAIRS TAKEN rule (6) and by whom NO DEFECTS 12. Particulars of any defects examination affecting the safe after working load at any such or
repair and step taken to remedy such de fects.
13. Details of Test: EXAMINATION CHECKED & IFOUND O. K. Test Load-5 Ton, Rad.-16 mtr., boom-21 mir, counter weight-5 ton. Reverse llorn---- *******-****-ON Over Winding Limit Switch----. -------**-ON Over Load limit switch- Ok Wire rope arrangement & Movement-Ok Tyres Ok, No leakuges observed. Wire rope dia. ---20 mm N6 fall General Condition & strength found satistactory 14.Other Observation: Main Boom-47 mtr. 1/We certily that on 04.04.2021, I/we thoroughly examined the above-nentioned litting Machine /tackles. The above iscorrect report of the result. Mnohaut HANT
Signatu$ (Cert,No,-CMP-38/2020,Jaipur, Da.a M 8 a4 2
Date: 04.04.2021
CPSON IONS Valid Till 03.04.2022
Markt, O11.Vonunad, Drive-in Road, Ahmodabad (Oujarat) Logal Jurisdictlon Udaipur (Raj.) Paymont dolayod boyond 10 days boars 18% Intorest" E&Ot ANURODH PRASHANT FIE (Mech ). MBA, M Tech Ph D (Pur). DIS, ASNOTII, Dy Mgr (Mech ) HZL (Regd ) AGM.CNFC Dethi (Regd) GSTIN 0eAHXPS6327A 1ZY Life Member NSC, IE() Kolkata, 1STD DELHI Chartered Engineer (India). Engg Projects Valuer Lead Auditor OHSAS Engg Compt Pressure Equipment. Lifting M/C & Tools (Gov of Raj) Extemal Audtor Fire &Safety. Syetern Improver Hevy tnduntrinl tructurat Feb &Frect 1 Bank Detait, 1DBI Bank Are 0s0104000047825, IF3 Code 1BKLO001166 824, Sector 4, Hiran Magn, Udaipur (Ray) Pin 313 002 Ph 0294 2460860 Motbite 09414760019/07120050019 F.mat a prashant@redifrnat com, PAN-AHxPse327A
MEGNETIC PARTICLEEXAMINATION REPORTI
Certificate no.-AP/AC-FLSPI-RDMIZIL01/21 Dated: 17h October 2021 Client Name: M/s Ajanta cranes, Udaipur Client Address: R D Mine, HZL, Dariba, Rajsamand, Rajasthan Project Name: Pest Fill Plant. R D Mine, Dariba. Equipment operated for: FL Smidth, R D Mine, HZIL, Dariba. Equipment Type: Hook,Crane Cap.-80 Ton, Make : Zoomlion, ZTC 80OR, Reg. No. RJ 39-EA-O726 Equipment Ycar of manufacturing: 2021 Method Description: Examination method: wet no Dry- yes Visible- yes Fluorescent -No Magnetizing Method: Continuous-n/a Residual-Yes Magnetic ficld direction: Long--yes Circular-Nil Current Type: AC -Yes DC- Yes Lightening: available Post Cleaning-No Demagnetization-No
Sr. Item detail Tested Evaluation Result
No. Remarkss Hook Block of crane-Zoomlion-ZTC 800R, 80 ton, Hook Block Cap.-60 Ton Complete Good No Serviceable hook crack Cap. Hook Weight-550 ton, Sieve-06, 04 Fall, Mfg No.-2010000143, observed Production No.-1090400193, Hook Code 20#, Opening-120 mm.
Name NDT Inspecting Agency-Anurodh Prashant-824/sector4, Hiran Magri,
Machine Model – ZTC800532 Chassis No - L5E6H5D37MA001804 Engine Sr. No. – 1620L110245 Vehicle Registration No. – RJ39EA726 Which was sold to M/s AJANTA CRANE SERVICE ( LAXMI LAL DANGI HUF ) as on FEB-2021.
SLI Calibration for this Crane Done as on 01-06-2021 (Terms & condition applied)
SLI MAKE & MODEL Zoomlion
SERIAL NUMBER 30XXX2 ANEMOMETER (WIND SPEED FS1906192 SENSOR)
This certificate is valid only for 06 Month If there will be No changes with any part which used by OEM.
