Technical Data - Tekna
Technical Data - Tekna
Technical Data - Tekna
Technical characteristics
Seko Tekna AKS Series is an analogic dosing pump with constant flow rate, which is manually adjustable by a knob mounted on
the front panel.
The flow rate has two frequency ranges:
• 0÷20 % of max flow rate
• 0÷100% of max flow rate
With only 5 sizes that pump can cover a wide range of performances, having a flow rate range from 0.4 to 110 l/h and a back
pressure from 0.1 to 20 bar. The power supply is 100÷240 Vac – 50/60 Hz therefore the same pump can operate with different
supply voltage.
The standard pump head is in PVDF, therefore high chemical compatibility with several liquids end.
All Tekna series are equipped with a manually priming pump for the start up.
The pump is furnished with a complete standard installation kit, which includes: PVDF foot filter and injection valve, PVC suction
tube, PE delivery tube. Moreover is available an installation kit in PVDF-T, on request.
Ci el d 1 model
Ci el d 2 hydraulics
Ci el d 3 power supply
Ci el d 4 liquid end
Ci el d 5 installation kit
Ci el d 6 seals
Ci el d 7 customization
Ci el d 1 model Analog
AYS
Ci el d 3 power supply
N 100÷240 Va c
Ci el d 5 installation kit
H PVDC
P PVDC-T
Ci el d 6 seals
0 CPM
1 EPDM
Ci el d 7 customization
000 s ta nda rd
DIMENSIONS
22
20
18
16
14
Pressure [bar]
12 AKS500N
10 AKS600N
8 AKS603N
6 AKS800N
4
2
0
0 5 10 15 20
Flow rate [l/h]
4
Pressure [bar]
3
AKS803N
2
0
0 20 40 60 80 100 120
Flow rate [l/h]