Scribd
Upload
163 views1 page

Bending and Folding Machine Difference

This document compares a hydrolic press brake machine and cornice brake folding machine. The hydrolic press brake machine requires a more skilled operator, can handle products of different thicknesses and shapes by changing the upper and lower molds, and uses hydrolic pressure to control bending angles. In contrast, the cornice brake folding machine has a simpler operation for loading and unloading, can be operated from both the front and rear, avoids relative movement between materials and tools by using rotatable blank holder beams and dual blank holder tools, and performs straight and simple creases.

Uploaded by

abdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
163 views1 page

Bending and Folding Machine Difference

This document compares a hydrolic press brake machine and cornice brake folding machine. The hydrolic press brake machine requires a more skilled operator, can handle products of different thicknesses and shapes by changing the upper and lower molds, and uses hydrolic pressure to control bending angles. In contrast, the cornice brake folding machine has a simpler operation for loading and unloading, can be operated from both the front and rear, avoids relative movement between materials and tools by using rotatable blank holder beams and dual blank holder tools, and performs straight and simple creases.

Uploaded by

abdi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

No Description Bending machine Folding machine

1 Example of machine Hydrolic press brake machine Cornice(finger) brake machine

2 Operation  Technical level of 5he  Operator becames


bending operators is simple loading and
relatively higher unloading work without
 Only operated from the skilled
front  Operated both front and
rear
3 Tool configuration  Products with different  Configuring rotateble
thickness and shape blank holder beam and
required different installing two sets of
upper and lower mold blank holder tools at the
 Due to the relative same time
movement of the  Basically avoid the
workpiece in the die relative movement
between the material
and the tools
4 Products  Used to make v bend,u  Used to make straight
bend and so on and simple creases

5 Working principle  Control the bending  After the plate is laid


angel by controlling flat on the work
the amount of table,the edge holding
pressure on the upper is pressed down to fix
knife the plate
 Heavy hydrolic forced  Small and simple sheet
punch machine metal bending machine
6 Driver  Hydrolic driver which  Adopt all electric drive
brings more design which reduce
maintenance work maintenance work
 N.B we conserned issues on hydrolic press brake bending machine,not folding
machine

You might also like