Acoustical Ceiling

Panels
(ACP)

Product Description Application

AFICO Acoustical Ceiling Panels are composed of AFICO Acoustical Ceiling Panels are intended for
fine, stable and uniformly textured inorganic glass use in commercial, institutional, and residential
fibers bonded together by a non-water soluble and construction as an acoustical and thermal ceiling
fire retardant thermosetting and fire resistant resin. panel for suspended ceiling systems. This decorative
They are free from coarse fibers and shot due to ceiling panel will specifically meet the designer’s
their mineral composition. need for acoustic control and has a good aesthetic
appearance and high thermal performance,
Facing
especially in open plan offices, board rooms, schools,
AFICO Acoustical Ceiling Panels are faced with
stores, showrooms and shopping centers.
abuse-resistant washable PVC film facing. Standard
available facing, Random Fissured, Shasta, Vinta.
Back-Facing
AFICO Acoustical Ceiling Panels are also available
with an additional Non-Woven Fiberglass Tissue back
facing.

Standard Available Products

Nominal Manufacturing Specifications.
Product
Type Density K Value@24°C R Value / Thickness NRC Value
ACP Kg/ Lb/ W/ BTU•in/ 19 ¾ 25 1 30 1¼ 19 25 30
m3 ft3 m•°K hr•ft2•°F mm in. mm in. mm in. mm mm mm
720 72 4.5 0.032 0.22 0.59 3.30 0.78 4.30 0.94 5.13 0.85 0.95 1.00
800 80 5.0 0.032 0.22 0.59 3.30 0.78 4.30 0.94 5.13 0.85 0.95 1.00
960 96 6.0 0.032 0.22 0.59 3.30 0.78 4.30 0.94 5.13 0.90 0.95 1.05
1200 120 7.5 0.032 0.22 0.59 3.30 0.78 4.30 0.94 5.13 1.00 1.10 1.10
Other thickness available upon request and verification

Standard Nominal Panel Sizes

Metric Imperial
(mm) Equivalent
24“ x 48“ (in.)
610 x 1220 2’ x 4’ (ft)
600 x 1200
24“ x 24“ (in.)
610 x 610 2’ x 2’ (ft)
600 x 600
 Acoustical Ceiling
Acoustical Ceiling Panels
Panels (ACP) (ACP)

Performance & Physical Characteristics

Apparent Thermal Conductivity ASTM C518, Surface Burning Characteristics
Specification Compliance AFICO Acoustical Ceiling Panels allow ultimate
EN12667 (UL723, ASTM E84)
AFICO Acoustical Ceiling Panels complies with flexibiity
W/m.°K or Btu.in/hr.ft².°F for all product range Base glass fiber is non-combustible when tested.
the property requirements of the following when designing for energy efficiency for a new
“K” or “λ” value at mean temperatures
Flame Spread Index Smoke Developed Index specifications: building or retrofit project.
Data for 10, 24 and 35°C mean temperature
DCL: ASTM C612
≤ 25 ≤ 50 Installation Recommendation
Nominal K-Value CE-EN: EN 13162-T4-WS.WL(P)1121-CPD-
AFICO Acoustical Ceiling Panels are produced only
Product
BA0136
Working Temperature Limitations with square edges and are designed for lay-in instal-
Type Density Mean Temperature UL 723: Classified as FHC 25/50 File no R37968
(ASTM C411) lation in a mechanical suspended, exposed, standard
ACP Kg/ Lb/ 10 °C 50 °F 24 °C 75 °F 35 °C 95 °F SCS: Recycled Content Certified
Operating temperature -4°C to +232°C At excessive "T" grid system. The ceiling panel must be support-
m3 ft3 SCS-MC-02811
temperatures, a limited migration of binder may ed on all edges. Hold-down clips are sometimes
720 72 4.5 0.031 0.21 0.032 0.22 0.034 0.24 ASTM C795: Thermal Insulation for Use in Contact
occur in the insulation in contact with the hot required.
with Austenitic Stainless Steel tested
800 80 5.0 0.031 0.21 0.032 0.22 0.034 0.24 surface. This is in no way impairs the performance of SASO: SASO GSO EN 13162 AFICO Acoustical Ceiling Panels are cut easily with
960 96 6.0 0.031 0.21 0.032 0.22 0.034 0.24 the insulation. License #201800652111 a utility knife, allowing for a tight fit around pipes,
1200 120 7.5 0.031 0.21 0.032 0.22 0.034 0.24 Mold Growth (ASTM C1338) lighting fixtures and borders.
No Sagging or Warping
Does not breed or sustain mold, fungus, bacteria or AFICO Acoustical Ceiling Panels will not sag or AFICO Acoustical Ceiling Panels may be back
Thermal Resistance “R” Value (ASTM C518) rodents. warp in high humidity conditions that prevail in the loaded with AFICO Blanket Insulation to provide
“R” is a measure of the resistance to heat flow of a Middle East. By using Afico ceiling Panels your
Corrosiveness (ASTM C665) additional thermal resistance (R-value).
material of any given thickness. ceiling systems will look better over time and
(“R” = m².°K/W or hr.ft².°F/Btu) Chemically inert. Will not cause or accelerate
corrosion of steel, stainless steel, copper or replacement of panels due to sagging and warping Panel Size Maximum Back Loading
can be eliminated. (mm)
T Where “T”= Thickness aluminum, due to its particular inorganic and
R= K Where “K” or “λ “ = Thermal Conductivity 610 x 610 300mm
mineral composition. Easy to Install for a Professional Looking Job
AFICO Acoustical Ceiling Panels are cut easily with 600 x 600 300mm
Sound Absorption Coeffecients
Water Vapor Sorption (ASTM C1104)
1/3 Octave Band Center Frequencies, Hz Less than 1% by weight a simple utility knife, allowing for a tight fit around 610 x 1220 150mm
borders, cut-outs, obstructions, and columns. No 600 x1200 150mm
Thickness Odor Emission (ASTM C1304)
125 250 500 1000 2000 4000 NRC saws ir sectioning are required.
mm in. Passes, no detectable odor that is ojectionable and
strong Reduced Noise Levels for a Better
15 5/8 0.66 0.76 0.60 0.80 0.89 0.80 0.75
Environment

els
20 7/8 0.68 0.81 0.68 0.78 0.85 0.80 0.80 Alkalinity (ASTM C871) AFICO Acoustical Ceiling Panels have excellent

r)

an
ge

gP
an
pH 9 sound absorption characteristics. This is especially

ilin
H
25 1 0.77 0.82 0.70 0.86 0.90 0.75 0.85

to
rn r

Ce
te r o
ve

rid
(al nge
important for areas such as open offices, schools,

l
ca
at
gle
Non-Fibrous (Shot) Content (ASTM C1335)

tG
38 1½ 0.64 0.88 1.02 0.91 0.84 0.62 0.90

sti
Tie Ha
An

or
ou

pp
stores and shopping centres, with a highly sound

s
ire le
er

ee
Not applicable to glass mineral fiber products

Ac
W tab

Su
et

sT
50 2 0.78 0.92 0.79 1.00 1.03 1.10 0.95

O
rim

jus

ain
IC
absorbent ceiling material.

os
AF
Pe

Ad

Cr

M
Light Reflection (ASTM D523)
Sound Transmission Lossin dB WHITE: LR1 = 30 -60 A Better Ceiling for the Short and Long Term
Octave Band Center Frequencies, Hz The abuse-resistant surface of AFICO Acoustical
Sound Transmission Coefficient (ASTM E90) Ceiling Panels will not chip or fake, even when
Thickness
125 250 500 1000 2000 4000 STC STC: 50 or greater dropped. This means reduced cost for contractors
mm in.
Noise Reduction Coefficient (ASTM E423) and owners, due to less damage during installation
15 5/8 30 42 51 59 62 51 50 and normal maintenance.
NRC: minimum 0.60
20 7/8 33 44 52 60 63 53 52
AFICO Acoustical Ceiling Panels can be wiped clean
25 1 35 45 53 59 63 55 54 with soap and water, so normal surface dust can be
38 1½ 38 47 55 58 63 57 56 removed as needed.
50 2 44 55 63 67 71 71 64 Reduced Energy Costs through Proper
Design
AFICO Acoustical Ceiling Panels have a built-in
thermal resistance (R-Value) of R=0.06m2.°K/W, for
the standard 72 kg/m3 density and 20mm thick
type. AFICO Acoustical Ceiling Panels can also be
back loaded with Blanket Insulation to provide an
additional R-value of up to 6.70m2.°K/W (See Maxi-
mum Back loading).

Thermal Sound Fire Enviroment Recycled

Insulation Insulation Resistant Friendly Materials
 Acoustical Ceiling Panels
(ACP)
Maintenance
No maintenance is required. AFICO Acoustical
Ceiling Panels products have a high resistance
to accidental damage from knocks and handling
during installation and maintenance. Dimensionally
stable under varying conditions of temperature and
humidity, rot proof, odorless, non-hygroscopic and
will not sustain vermin or fungus due to its inorganic
and mineral compositions.
The product will maintain its thermal properties
throughout the lifetime of the construction and will
not age. AFICO fiberglass is non-toxic and presents
no hazard to health.

The AFICO Product Range includes • Acoustical Ceiling Panels • Blanket Insulation Storage
• Board Insulation • Cavity Wall Insulation • Duct Liner • Duct Liner Board • Faced Duct Wrap To avoid moisture in the building construction, AFICO
• HD Series Blanket Insulation • Heavy Density Pipe Insulation • Mechanical Board Insulation insulation products stored outside must be kept dry.
• Pipe Wrap Insulation • Pre-engineered Metal Building Insulation • Quiet Liner
• Quiet Liner Board • Roof Deck Board Insulation • Thermal Insulating Wool We recommend AFICO products to be always stored
in covered and dry areas. AFICO is not liable for
the damage resulting from inadequate utilization,
loading and off-loading and mishandling of its
Call us today for more information &
professional guidance: products.

Dammam (H.O. & Factory): +966 13 331 3333 Warranty

Riyadh: +966 11 472 5555 See manufacturer’s General Terms and Conditions
Jeddah: +966 12 670 0020 of Sale. As AFICO and/or OCF has no control over
GCC & Int’l Export Office (Dubai): +971 4 294 1211 installation design, installation workmanship,
Egypt (Cairo): +20 100 009 9209 accessory materials, or conditions of application,
North Africa (Tunis): +216 2 053 1000 AFICO and/or OCF does not warrant the performance
Please send all email inquiries to [email protected] or results of any installation containing their
products. This warranty disclaimer includes all
implied warranties, including the warranties or
merchantability and fitness for a particular purpose.

People & Planet Arabian Fiberglass Insulation Company AFICO

reserves the right to alter product specifications
Always First without prior notice, as part of its policy of continued
development and improvement. The installation
AFICO’s products are all energy saving, methods described in this leaflet are not compulsory.
environmentally friendly, use even more recycled The choice of materials and methods of fixing are
materials and contribute to the fight against the decision of the specifier, consultant or contractor.
global warming. For further information or advice on specification of
products, contact your local, sales office.
afico.com.sa Availability
Manufactured by Arabian Fiberglass Insulation
Company, Ltd. AFICO member of Zamil Industrial
Co. II, with head-quarters and production facilities
located in Dammam, Saudi Arabia, under license
AFICO is an affiliate of Owens Corning USA, and is a GIG Company, a subsidiary of Zamil Industrial
from and utilizing the manufacturing specifications
and technology of Owens-Corning Corporation OCF,
Authorized Distributor:
Toledo, Ohio, U.S.A. Marketed throughout Saudi
Arabia, the G.C.C. countries, the Middle East and the
Far East. AFICO products are available directly from
as well as through a vast and reliable network of
local distributors.
Special products are manufactured on request.