Wartsila 220 Sgsummary

FOR SALE
ONE (1)
2.8MW WARTSILA 18V220SG
NATURAL GAS ENGINE AND
ASSOCIATED ANCILLARIES
$600,000.00
As seen on
www.generatorx.com
Venture Manager and Owner

Walters Power International
Tim Emrich, Director of Marketing
6219 Riviera Drive
Oklahoma City, OK 73112
Phone: 405-840-8383
Fax: 405-840-8999
[email protected]
LISTING ANNOUNCEMENT
Walters Power International (WPI) is the Venture owner and manager of two
(2) Wartsila 18V220SG engines (the EQUIPMENT) described herein. NOTE:
ONE ENGINE HAS BEEN SOLD AS OF JANUARY 25, 2005. The
EQUIPMENT is offered for sale on AS IS, WHERE IS-basis to principal
parties only. Information in this ANNOUNCEMENT has been provided to
WPI as best available information. WPI makes no representation or
warranty, express or implied, as to the accuracy or completeness of
information in this ANNOUNCEMENT or other written or oral
communication with any party. Nothing contained herein should be relied
upon as a promise or representation whether related to past or future
activities. This ANNOUNCEMENT is a summary, and as such does not
purport to contain all information parties may require to evaluate the
EQUIPMENT. Recipients are encouraged to conduct independent
inspection of the EQUIPMENT and related documentation.
EQUIPMENT HISTORY
The Equipment within this offering was initially part of a much broader purchase of like-
units by an internationally-recognized equipment manufacturer, service, and parts firm.
While the majority of the purchased equipment was placed into service at a handful of
California power plants, the firm’s EPC division was eventually dissolved prior to
finding projects for the Equipment within this offering. The Equipment is all new/unused
and was manufactured in 2001. The Equipment has been in storage since taking delivery
from the manufacturers.
EQUIPMENT DISPOSITION AND LOCATION
The Equipment is located at the Wartsila/CISERV facility in Long Beach, California.
All Equipment is for sale, AS IS, WHERE IS on a first come, first serve basis to buyers
who submit a reasonable and acceptable offer to Walters Power International.
Inspection of the Equipment may be performed during the due diligence period, as
provided for in a mutually-agreeable and executed equipment sales agreement. Such
contract and subsequent inspection will be coordinated by:
Tim Emrich
Director of Marketing
6219 Riviera Drive
Oklahoma City, OK 73112
Phone: 405-840-8383
Fax: 405-840-8999
[email protected]
WARTSILA 18V220SG
SCOPE OF SUPPLY
AND CUT SHEETS
Walters Power International - Wartsila 18V220SG
Scope of Supply
Section Description Qty

A POWER GENERATION
A1 GENERATING SET
A1.1 ENGINE
Gas Engine: 18V220SG: 1200 RPM: 2,883 kWm (ISO), Serial 281043 1
A1.2 GENERATOR
Generator: 4,160 Volt; 60 Hz; 2,800 kWe 1
A1.3 BASE FRAME (Common Base Frame) 1
A1.8 ELASTIC MOUNTING (Steel Spring Set) 1
A1.5 COUPLING FLYWHEEL 1
Flexible coupling 1
Flywheel cover 1
Generating set assembly 1
A1.6 FIXING EQUIPMENT
Fastening equipment (set) 1
Vibracon elements (set) 1
A2 MECHANICAL AUXILIARY SYSTEMS
A2.1 FUEL SYSTEM
A2.2 LUBRICATING OIL SYSTEM
A2.2.1 ENGINE LUBRICATING OIL SYSTEM
Lubricating oil main filter 1
Lubricating oil thermostatic three-way valve 1
Pre lubricating oil pump 1
Lubricating oil heat exchanger 1
A2.4.2 COOLING SYSTEM
A2.5 CHARGE AIR SYSTEM
Charge air filter and on turbocharger 1
Charge air heat exchanger 1
A4 AUTOMATION SYSTEM
A4.1 INSTRUMENTATION
Engine instrumentation 2
WECS instrumentation 2
A4.2 CONTROL PANELS
Engine wise section centralized control panel 2

TECHNICAL DATA GENERAL ENGINE DATA
Version HE LN Bore inch 8.7

Electric power 1) kWe 2800 2800 Stroke inch 9.5
Cylinder configuration Vee 18.0
Heat Rate BTU/kWh 8018 8611 Cylinder displacement liter 9.1
a. Hot water cogen 195/122 kWth 2502 2661 Rated speed rpm 1200.0
mmBtu/h 8.54 9.08 Mean effective pressure psig 256.0
Total efficiency 81% 77% Genset length feet 25.2
b. Steam generation 130 psig Genset width feet 6.0
sat. at cond 140 °F klb/h 4.3 4.7 Genset height feet 9.0
mmBtu/h 4.47 4.89 Genset weight ton 39.9
Total efficiency 62% 60% Max. altitude before dera ft. ASL 4921
Max. suction air temperat °F 86
Heat balance
HE LN Service conditions COP according to ISO 8528/1 and reference
Fuel input (LHV) 2)mmBTU/h 22.45 24.11 conditions according to ISO 3046/1:
Mechanical kWm 2883 2883 HE: High efficient engine; LN: Low NOx engine
HT cooling circuit 3)mmBTU/h 2.82 2.83 Methane number: HE engine > 80, LN engine > 72.
LO cooling circuit 3)mmBTU/h 1.06 1.13 COP : continuous service without limitation time between the
LT cooling circuit 3)mmBTU/h 1.06 1.18 stated maintenance intervals - no overload allowed.
Recoverable exhaust ( 3)mmBTU/h 4.66 5.12
Unrecovered exhaust 3)mmBTU/h 2.53 3.53 1) COP Generator terminals at p.f. = 0.85
Engine + alternator radiatio
mmBTU/h 0.77 0.76 2) Fuel is Natural gas. According to tolerance of +5%.
Electrical efficiency 3) Tolerance ±10%.
100% load 42.6% 39.6% 4) Indicative value, the NMHC-emissions are highly dependent
75% load 40.6% 37.4% on gas composition and should be calculated case by case.
50% load 37.9% 34.5% 5) Tolerance ±15%.
Emissions (at 15% O2 vol. dry) 6) Tolerance ±5%.
NOx (as NO2) max. ppm-v 92 46 7) Tolerance ±10°C.
11) g/kWhe 1.4 0.7 8) Delivered inlet flange Gas Regulating Unit (GRU)
CO max. (untreated) ppm-v 297 445 9) Natural gas LHV 980 BTU/scf LHV
11) g/kWhe 3.8 6.2 10) For information, with lubricating oil specific gravity = 0.830.
VOC 4) ppm-v 42 75 11) Conversion to g/bhp-hr: multiply given data by 0.72.
11) g/kWhe 0.4 0.7 12) Flow rate is rated at maximum pump capacity, and
Cooling circuit includes internal recirculation.
HT water inlet tempera 5) °F 197 197
HT water outlet temperatur °F 212 212
HT water flow 3) 12) gpm 376 377
LO inlet temperature °F 167 167
LO outlet temperature 5) °F 185 186
LO flow 12) gpm 301 301
LT water inlet temperature °F 104 104
LT water outlet tempe 5) °F 109 110
LT water flow 3) 12) gpm 424 393 Derating
Air intake / exhaust gas If service conditions differ from the reference conditions,
Air intake flow 3) lb/h 41,400 43,500 the engine may be derated.
Exhaust gas flow 6) lb/h 42,700 44,800
Exhaust gas temperat 7) °F 671 689 Engineering data subject to change without prior notice and
Maximum exhaust back pr inch wg 20 20 are not contract values.
Miscellaneous
Min gas pressure to 8)
G 9) psig 51 51
Lubricating oil consumptio g/kWhe 0.5 0.5
10) lb/h 3.1 3.1
Scopes of supply and techical data are standard equipment for general purposes. Design is subject to local regulations Rev. E, 05Jun01
and product development. They are superceded by any firm or budgetary quote rendered. 6/26/01, page 4 of 17
Weights and Dimensions (inches and pounds)
Manufacturer Model Quantity Height Width Length Weight Transport
Wartsila 18V220 SG 281043 1 144 91 315 86000 HHDD

Wartsila Ancillaries 1 <20000 2 Crates
PHOTOS
OF
WARTSILA 18V220SG UNIT
WARTSILA 18V220SG
FUEL SPECIFICATION

Wartsila 220 Sgsummary

Uploaded by

Copyright:

Available Formats

Wartsila 220 Sgsummary

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wartsila 220 Sgsummary

Uploaded by

Copyright:

Available Formats

FOR SALE

Venture Manager and Owner

EQUIPMENT DISPOSITION AND LOCATION

The Equipment is located at the Wartsila/CISERV facility in Long Beach, California.

Section Description Qty

TECHNICAL DATA GENERAL ENGINE DATA

Version HE LN Bore inch 8.7

Manufacturer Model Quantity Height Width Length Weight Transport

Wartsila 18V220 SG 281043 1 144 91 315 86000 HHDD

You might also like