Scribd
Upload
217 views2 pages

20 VMC120 Adv

The single channel output module is a wall-mountable device that provides a relay contact for activating accessibility equipment like vibrating pillows. It receives commands from a control panel to energize its normally de-energized relay. The module incorporates short circuit protection and connects via plug-in terminal blocks for wires up to 2.5mm2. It has an IP21 rating and operates from 15-40Vdc with 6mA maximum current draw.

Uploaded by

Luc Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
217 views2 pages

20 VMC120 Adv

The single channel output module is a wall-mountable device that provides a relay contact for activating accessibility equipment like vibrating pillows. It receives commands from a control panel to energize its normally de-energized relay. The module incorporates short circuit protection and connects via plug-in terminal blocks for wires up to 2.5mm2. It has an IP21 rating and operates from 15-40Vdc with 6mA maximum current draw.

Uploaded by

Luc Pham
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Wall Mounting Single Relay Output Module

The single channel output modules are loop-powered, designed


around a fully digital protocol and provide form C changeover
contacts for activating equipment for DDA compliance such as
vibrating pillows.

The output channel is a normally de-energised relay switched on


by a command from the control panel.

The unit provides a fast and secure response, and incorporates


a bidirectional short circuit isolator.

Connections are made using plug-in terminal blocks which will


accept conductors up to 2.5mm ² .

The unit is supplied fixed to a plate which is suitable for wall


mounting with a choice of standard 25 mm or deep 47 mm
mounting boxes available.

Features
Short circuit isolators in each device to the requirements of
EN54-17
Auto-addressing capability (by the control panel) or manually
using a hand held programmer.
Digital checking of double address
Line quality information
Bicolour (red/green) LED driven by the control panel

Standards and Approvals


EN54-17:2005
EN54-18:2005

Specification
Power supply 15 - 40 Vdc
Maximum alarm current consumption 6 mA
Relay switching 2 A / 30 Vdc
Operating temperature range -30°C to +70°C
Humidity (non condensing) 85% RH
Dimensions H x W x D mm 87 x 87 x 32
Weight 200 g

Version [1.1] Page 1 of 2


www.advancedco.com

IP rating 21C

Order Codes and Options


20-VMC120-ADV: Wall Mounting Single Relay Output Module

Check if this document is up to date | Give us feedback

Advanced, The Bridges, Balliol Business Park, Newcastle upon Tyne, NE12 8EW, UK T: +44 (0)345 894 7000, E: [email protected],
W: www.advancedco.com
As our policy is one of constant product improvement the right is therefore reserved to modify product specifications without prior notice.

Version [1.1] Page 2 of 2

You might also like