Scribd
Upload
597 views2 pages

Unit Weight of Soil

Unit weight of soil is the ratio of the total weight of soil to the total volume of soil. It is usually determined in the laboratory by measuring the weight and volume of an undisturbed soil sample, but can also be estimated in the field using tests like the sand cone test. Empirical values for unit weight range from 70-150 lbs/ft3 for granular soils and 100-140 lbs/ft3 for cohesive soils, depending on soil type and density. Typical unit weights are also provided for various common soil types.

Uploaded by

Abdul Wahab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
597 views2 pages

Unit Weight of Soil

Unit weight of soil is the ratio of the total weight of soil to the total volume of soil. It is usually determined in the laboratory by measuring the weight and volume of an undisturbed soil sample, but can also be estimated in the field using tests like the sand cone test. Empirical values for unit weight range from 70-150 lbs/ft3 for granular soils and 100-140 lbs/ft3 for cohesive soils, depending on soil type and density. Typical unit weights are also provided for various common soil types.

Uploaded by

Abdul Wahab
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Unit Weight of Soil

Unit weight of a soil mass is the ratio of the total weight of soil to the
total volume of soil.

Unit Weight, , is usually determined in the laboratory by measuring


the weight and volume of a relatively undisturbed soil sample
obtained from a brass ring. Measuring unit weight of soil in the field
may consist of a sand cone test, rubber balloon or nuclear
densiometer.

Empirical values for , of granular soils based on the standard penetration


number, (from Bowels, Foundation Analysis).
SPT Penetration, N-
Value (blows/ foot) (lb/ft3)
0-4 70 - 100
4 - 10 90 - 115
10 - 30 110 - 130
30 - 50 110 - 140
>50 130 - 150

Empirical values for , of cohesive soils based on the standard penetration


number, (from Bowels, Foundation Analysis).
SPT Penetration, N-
Value (blows/ foot) sat (lb/ft3)
0-4 100 - 120
4-8 110 - 130
8 - 32 120 - 140

Typical Soil Characteristics (from Lindeburg, Civil Engineering Reference


Manual for the PE Exam, 8th ed.)
Soil Type  (lb/ft3) sat (lb/ft3)
Sand, loose
and uniform 90 118
Sand, dense
and uniform 109 130
sand, loose
and well
graded 99 124
Sand, dense 116 135
and well
graded
glacial clay,
soft 76 110
glacial clay,
stiff 106 125
Typical Values of Soil Index Properties (from NAVFAC 7.01)
Soil Type  (lb/ft3) sub (lb/ft3)
Sand; clean,
uniform, fine
or medium 84 - 136 52 - 73
Silt; uniform,
inorganic 81 - 136 51 - 73
Silty Sand 88 - 142 54 - 79
Sand; Well-
graded 86 - 148 53 - 86
Silty Sand
and Gravel 90 - 155 56 - 92
Sandy or
Silty Clay 100 - 147 38 - 85
Silty Clay
with Gravel;
uniform 115 - 151 53 - 89
Well-graded
Gravel,
Sand, Silt
and Clay 125 - 156 62 - 94
Clay 94 - 133 31 - 71
Colloidal
Clay 71 - 128 8 - 66
Organic Silt 87 - 131 25 - 69
Organic Clay 81 - 125 18 - 62
Typical Soil Characteristics (from Lindeburg, Civil Engineering Reference
Manual for the PE Exam, 8th ed.)
Soil Type  (lb/ft3) sat (lb/ft3)
Sand, loose
and uniform 90 118
Sand, dense
and uniform 109 130
sand, loose
and well
graded 99 124
Sand, dense
and well
graded 116 135
glacial clay,
soft 76 110
glacial clay,
stiff 106 125

You might also like