Anderol 555

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ANDEROL 555

Synthetic Compressor Lubricant


Product Data Sheet

ANDEROL synthetic lubricants are the only Cylinder and crankcase lubrication for
long-life synthetic lubricants with over 60 reciprocating compressors, vane compressors
years of successful performance. and vacuum pumps for the following gases:

• No metal additives to interfere with • Air • Hydrogen Sulfide (dry)


catalytic processes • Butadiene • Natural gas
• Carbon Monoxide • Methane
• Fewer oil changes • Furnace (crack) gas • Nitrogen
• Reduces compressor maintenance • Carbon Dioxide (dry) • Propane
ANDEROL 555 is an ISO 100 synthetic • Greatly reduces fire and explosion hazard • Ethylene • Synthesis Gas
diester based compressor lubricant • Separates water condensate rapidly • Helium • Sulfur Hexafluoride
specifically designed to provide longterm • Hydrogen
• Lower oil consumption
lubrication in air and process gas • Eliminates lacquering and deposits
compressors. Nominal Operating Range -15°C to 210 °C
• Reduces energy consumption
ANDEROL 555 meets or exceeds the
following specifications: • ABAC • Instituto Iperbarico
The following seals, paints and plastics are • ALKIN • Leybold
BAM Approval recommended for use in contact with Anderol • ALUP • Matsubara
Synthetic Lubricants. Materials not • BAG • Nautilus
DIN 51506 • Becker • Sperre
recommended are also shown. For more
• Busch • Thomassen
information on other materials see our • Bosch (used by) • Tanabe
‘Compatibility Guide’. • Compair • Telstar
• Deno Compressors • TEPRO
RECOMMENDED : • Gardner Denver/ • UOP
Hamworthy
Viton, High Nitrile Buna N, Teflon, Epoxy
Paint, Oil-Resistant Alkyd, Nylon, Delrin,
Celcon, PBT

NOT RECOMMENDED:
Neoprene, SBR Rubber, Low Nitrile Buna N,
Acrylic Paint, Lacquer, Polystrene, PVC, ABS

PROPERTIES TEST METHOD ANDEROL 555


Appearance @ 20°C visual Clear Yellow Liquid
Viscosity @ 40°C, cSt ASTM D-445 93.5
Viscosity @ 100°C, cSt ASTM D-445 9.1
Viscosity Index ASTM D-2270 61
Density @ 15°C, kg/l ASTM D-1298 0.957
Total Acid Number, mg KOH/g ASTM D-664 0.05
Flash Point, °C ASTM D-92 250
Pour Point, °C ASTM D-97 -33
Demulsibility @ 82°C,min ASTM D-1401 10
Evaporation,22 hrs @100°C,% ASTM D-972 0.16

You might also like