Debre Berhan University

College of Engineering
Department of Mechanical Engineering

Mechanisms of
Machinery
MEng3071 Chapter Four
4. Acceleration Analysis of Linkages

By: Nigatu D.

1
 Contents

4. Acceleration Analysis of Linkages

4.1. Acceleration analysis by vector mathematics
4.2. Acceleration analysis using equations of relative motion
4.3. Acceleration analysis by using complex numbers

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 2

 4. Acceleration Analysis of Linkages

• Acceleration analysis involves determining the manner in which certain

points on the links of a mechanism are either “speeding up” or “slowing
down.”
• Acceleration is a critical property because of the inertial forces
associated with it.
• The acceleration can be mathematically described as:
V dV dR
a = lim = since V = (4.1)
t → 0 t dt dt
d 2R
= 2 =R
dt
• Similarly angular acceleration of a link is described as
 d  d
 = lim = since  = (4.2)
t → 0 t dt dt
d 2
= 2 =
dt
Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 3
 4.1. Acceleration analysis by vector
mathematics
• The acceleration of a point P moving in the x-y-z system
relative to the X-Y-Z system, is obtained by differentiating the
velocity equation.
VP = Vo + V +   R (4.3)
• Differentiating equation (4.3) yields the acceleration
Equation is

VP = Vo + V +   R +   R (4.4)

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 4

 4.1. Acceleration analysis by vector
mathematics
• Each term on the right hand side of the acceleration equation
is evaluated as follows:
d
Vo = ao (4.5) V = ( xi + yj + zk ) (4.6)
dt
= ( xi + yj + zk ) + ( xi + yj + zk )
Substituting for i , j , k

V = ( xi + yj + zk ) + x(  i ) + y (  j ) + z (  k ) (4.7)
let ( xi + yj + zk ) = a (4.8)

Note that x(  i ) + y (  j ) + z (  k ) =   ( xi + yj + zk ) (4.9)

=  V
Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 5
 4.1. Acceleration analysis by vector
mathematics
• The acceleration component can be written as:
V = a +  V (10)
• The last term on the right hand side of the acceleration
equation is
  R =   (V +   R) (11)
=   V +   (  R)
• Substituting the corresponding values in the acceleration
equation
a p = ao + a +   R + 2  V +   (  R ) (4.12)

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 6

 4.1. Acceleration analysis by vector
mathematics
a p = ao + a +   R + 2  V +   (  R ) (4.12)

• The different acceleration components are:

2  V– is Coriolis' component of acceleration, sense normal to V;
ao
– is acceleration of the origin of x-y-z relative to X-Y-Z
system;
a – is acceleration of P relative to x-y-z system;
  R – is the tangential acceleration of a point fixed on the x-y-z
system coincident with P as the system rotates about O
  (  R) – is the normal component of acceleration of the point
coincident with P;

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 7

4.1. Acceleration analysis by vector
mathematics
Where:
 – is angular velocity of x-y-z system related to X-Y-Z
system.
V – is velocity of P relative to x-y-z system; and
R – is position vector of P relative to x-y-z system

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 8

 4.2. Acceleration analysis using
equations of relative motion
• Consider a link AB rotating with an angular velocity ω and
angular acceleration α as shown.
The relative acceleration
equation is:
a A = aB + a A / B (4.13) aA

Where
𝑎𝐴 is acceleration of point A
𝑎𝐵 is acceleration of point B
𝑎𝐴/𝐵 is acceleration of A relative to B
the acceleration term 𝑎𝐴/𝐵 has two components
(a A/ B ) n =     RA/ B along the link from A to B, and
( a A / B ) t =   RA / B in the direction perpendicular to AB.
Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 9
 4.3. Acceleration analysis by using
complex numbers
• Acceleration of a point

RP = pei
( )
VP = pei i = pei ( i )

aP = VP = pei (i ) 2 + pei ( i ) (3.14)

= − 2 pei + i pei
n
aP a tP
Acceleration has 2 components: normal & tangential

Magnitudes of acceleration components a n =  2r , at =  r (4.15)

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 10
 4.3. Acceleration analysis by using
complex numbers
Acceleration Analysis of (4bar)
Given 2. Find 3 and 4

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 11

 4.3. Acceleration analysis by using
complex numbers
• Write vector loop equation:
aei 2 + bei 3 − cei 4 − dei1 = 0
Take two derivatives:
i 2 i 3 i 4
i 2 ae + i 3be − i 4 ce =0

−  2 aei 2 + i 2 aei 2 −  3 bei 3 + i 3bei 3 +  4 cei 4 − i 4 cei 4 = 0

2 2 2

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 12

 4.3. Acceleration analysis by using
complex numbers
i 2 i 2 i 3 i 3
−  2 ae + i 2 ae −  3 be + i 3be +  4 cei 4 − i 4 cei 4 = 0
2 2 2

Separate knowns and unknowns

 3be i 3
−  4 ce i 4
=
(
 2
2
aei 2 − i 2 aei 2 +  3 bei 3 −  4 cei 4
2
=Z
2
)
i
Take conjugate  3be −i 3 −  4 ce −i 4 = Z

Put in matrix form  bei3 −cei4   3   Z 

 − i3 − i 4    = 
be −ce   4   Z 
i 4 −1
 3   be i3
−ce   Z 
  =  − i3
Solve
− i 4   
 4  be −ce   Z 
Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 13
 4.3. Acceleration analysis by using
complex numbers
• Coriolis Acceleration
Position of slider
R p = pei
Velocity of slider
V p = pei i + pei
Transmissio Slip
n velocity velocity

Acceleration: Use the product rule

a p = pe i + pe
i i
( i ) + pei i + pei + pei i
2

Combining terms: Coriolis acc. occurs when a body

a p = ( p − p 2 ) + i ( p + 2 p )  ei has vslip and ω
Slip Normal Tangential Coriolis
Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 14
 4.3. Acceleration analysis by using
complex numbers
• Inverted Crank Slider
• Given 2. Find b , 3 and 4

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 15

 4.3. Acceleration analysis by using
complex numbers
• Write vector loop equation and take two derivatives
aei 2 − bei 3 − cei 4 − dei1 = 0
b varies with time
i 2 aei 2 − bei 3 − i 3bei 3 − i 4 cei 4 = 0
−  2 aei 2 +  2 aei 2 i
2

− bei 3 − 2bei 3 i +  3 bei 3 −  3bei 3 i

2

+  4 cei 4 −  4 cei 4 i = 0
2

• Recall
3 =4 +

• so  3 =  4
3 = 4
Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 16
 4.3. Acceleration analysis by using
complex numbers
−  2 aei 2 +  2 aei 2 i − bei 3 − 2bei 3 i +  3 bei 3 −  3bei 3 i +  4 cei 4 −  4 cei 4 i = 0
2 2 2

• Group into knowns and unknowns, 3=4

( 2
)
bei 3 + i 3 bei 3 + cei 4 = − 2 aei 2 +  2 aei 2 i − 2bei 3 i +  3 bei 3 +  4 cei 4
2 2

• Take conjugate =Z

(
be −i 3 − i 3 be −i 3 + ce −i 4 = Z )
• Put in matrix form
 e i 3 bei 3 + cei 4   b   Z 
 − i 3 − i 3 − i 4   = 
e be + ce   3   Z 
• Solve
−1
 b   ei 3 be i 3
+ ce i 4 Z 
  =  − i 3 − i 3 − i 4   
 3  e be + ce   Z 
Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 17
 References
1. Addisu Dagne, “Lecture notes, Mechanisms of Machinery, Acceleration
Analysis of Linkages,” November, 2013
2. Norton, Robert L.,”Design of Machinery”, WCB/McGraw-Hill,1999.
3. David H. Myszka, “MACHINES AND MECHANISMS”, Prentice Hall,
2012
4. Alem Bazezew, “Mechanisms of Machinery”, Addis Ababa University
Press, 2001
5. http://ndl.ethernet.edu.et/bitstream/123456789/88001/4/Chapter%2004_
Acceleration%20Analysis.pptx
6. https://slideplayer.com/slide/8270810/

Mechanisms of Machinery [MEng3071]: 4. Acceleration Analysis of Linkages BY: Nigatu D. 18

19