Scribd
Upload
33 views1 page

Specification of Anode

Table 1 shows the chemical composition of 5 different aluminum alloy types for anodes, labeled A11-A21. The primary elements include Zn, In, Cd, Sn, Mg, Ti and Si, with Al as the primary component. Table 2 provides the electrochemical performance metrics for two of the aluminum alloy types, including their open circuit potential, working potential, actual capacity, current efficiency, consumption rate and dissolution condition.

Uploaded by

AbuAbdullah Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views1 page

Specification of Anode

Table 1 shows the chemical composition of 5 different aluminum alloy types for anodes, labeled A11-A21. The primary elements include Zn, In, Cd, Sn, Mg, Ti and Si, with Al as the primary component. Table 2 provides the electrochemical performance metrics for two of the aluminum alloy types, including their open circuit potential, working potential, actual capacity, current efficiency, consumption rate and dissolution condition.

Uploaded by

AbuAbdullah Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Table 1 Chemical Composition

Chemical Composition/%
Type Others Al
Zn In Cd Sn Mg Si Ti
Si Fe Cu Balance
0.00
Al-Zn-In-Cd 0.018~
2.5~4.5 5~0. - - - - 0.10 0.15 0.01 Balance
A11 0.050
020
0.01
Al-Zn-In-Sn 0.020~
2.2~5.2 - 8~0. - - - 0.10 0.15 0.01 Balance
A12 0.045
035
0.10
Al-Zn-In-Cr 0.025~
5.5~7.0 - - - ~0.1 - 0.10 0.15 0.01 Balance
A13 0.035
5
0.02 0.50
Al-Zn-In-Mg 0.020~
2.5~4.0 - 5~0. ~1.0 - - 0.10 0.15 0.01 Balance
A14 0.050
075 0
Al-Zn-In-Mg- 0.50
0.020~ 0.01~
Ti 4.0~7.0 - - ~1.5 - 0.10 0.15 0.01 Balance
0.050 0.08
A21 0

Table 2 Electrochemical Performance


Actual Current
Open Circuit Working Consumption Dissolution
Item Material Capacitance Efficiency/
Potential/V Potential/V Rate/kg.(A.a)-1 Condition
/(Ah/kg) %
The product
Electroc Type 1 -1.18~-1.10 -1.12~-1.05 ≥2400 ≥85 ≤3.65 is easy to fall
hemical off and the
Perform surface
ance Type 2 -1.18~-1.10 -1.12~-1.05 ≥2600 ≥90 ≤3.37 dissolves
evenly.

You might also like