Manuals+ — User Manuals Simplified.

CUBETEK Bluetooth Transmitter & Re-

ceiver User Manual
May 26, 2021

Home » CUBETEK » CUBETEK Bluetooth Transmitter & Receiver User

Manual
CUBETEK Bluetooth Transmitter & Receiver User Manual
 Contents [hide]
1 Product Overview
2 Package Contents:
3 Basic Operation
4 How to use as a Bluetooth Transmitter (TX)
4.1 Bluetooth Pairing and Connection
4.2 Multi Point Connection
4.3 TV Connection
5 How to use as a Bluetooth Receiver (RX)
5.1 Bluetooth Pairing and Connection
5.2 Multi Point Connections
5.3 Speaker Connection
6 Charging
7 LED Indicator
8 Product Specification
9 Attention and Q & A
10 Support
11 Documents / Resources
11.1 References
12 Related Posts

Product Overview

MFB (Multi Function Button), Selection Switch TX/RX (TX:

transmitter; RX: receiver), Mode Selection Switch SPDIF/AUX, AUX
Audio Port, SPDIF input, SPDIF output, Micro USB Charging Port, LED
Indicator

Package Contents:

A Bluetooth Transmitter & Receiver

Advertisement
B 3.5mm Audio Cable *1

C. Micro USB Charging Cable *1

D. User Manual *1

E. Fiber Optic Cable *1

 For Support Contact us on:
www.melodymedia.in

Basic Operation

Button Function Operation

Long press MFB 3 s

Power on / off econds to power on
or off

RX Mode, short pres

s MFB to play or pau
Play / pause se music during play
ing. Not work in TX
MFB (Multi Function mode
Button)
Double press MFB t
o enter into pairing
mode. (not work in
 Enter Pairing mode Multi Point Connecti
ons) (RX: Red & Blu
e LED flash alternate
ly; TX: Blue LED flas
h quickly)

Slide to TX side or RX side to select the TX

or RX mode. *The paired records of the last
TX/RX mode selecti mode will be delete when switch to another
on mode. *Switch to another mode after item t
urn off at least 3 seconds.

Power off or on status, slide to SPDIF side o

SPDIF/AUX mode se
r AUX side to select the SPDIF or AUX mod
lection
e

How to use as a Bluetooth Transmitter (TX)

Bluetooth Pairing and Connection

A Off mode, turn to TX switch and long press MFB 3 seconds to

power on.
B Double press MFB to enter into pairing mode with Blue LED flash.
C Turn on the Bluetooth function of your device (Bluetooth
Headphone, Speaker or receiver etc.) to pairing mode, with Red &
Blue LED flash alternately or Blue LED flash.

D Place the BTI-029 and your device close and wait in 5-30
seconds for connection, LED turns to low Blue LED flash after
connected.
E Connect BTI-029 and your phone with 3.5 mm audio cable, and
could play music from your phone to the headphone or speaker.
1. Off mode, slide to TX side

2. Long press MFB 3 seconds to power on , and double press MFB to

enter into pairing mode with Blue LED flash. Turn on the Bluetooth
function of headphone or speaker to enter into pairing mode.
3. Place the BTI-029 and your device close and wait in 5-30 seconds
for connection, Blue LED turns to slow flash after connected.

4. Slide to SPDIF side or AUX side to select the SPDIF or AUX mode
(SPDIF port in TX mode is SPDIF IN).

Multi Point Connection

A Follow 3.1 to connect with the first device, double press MFB to
enter into pairing mode again with Blue LED flash.
B Turn on the Bluetooth function of the second device (Bluetooth
headphone, speaker or receiver etc) to enter into pairing mode.
Place the BTI-029 and your device close and wait in 5-30 seconds
for connection. BTI-029 solid Green LED after connected with two
devices.

Notes
Pls turn off BTI-029 and turn on again, and try to reconnect or
repair with two devices, when it could not connected with two
devices at the first time.
Multi point connection could compatible with most of the chipset
solution at the market, except less of them.
Single connection priority support aptXTM low latency (connected
device also support aptXTM low latency). Two connections priority
support aptXTM low latency (connected devices also support
aptXTM low latency). Two connections priority support aptXTM
(connected devices also support aptXTM). Two connections turn
to SBC automatically if the CODEC are different.
TV Connection

Connect BTI-029 and the TV with 3.5mm audio cable or fiber optic
cable, and Bluetooth connect BTI-029 with devices ( Bluetooth
headphone or speaker ), and could transmit the audio from TV to the
devices

Notes
Pls test the TV with wired headphone or check the TV’s audio
settings (Select 3.5mm output ) to make sure the devices connect in
the right way and play audio from the TV Pls connect the TV and
SPDIF IN port with fiber optic cable when select the Toslink
connection mode

How to use as a Bluetooth Receiver (RX)

Bluetooth Pairing and Connection

A. Off mode, turn to RX switch, long press MFB 3 seconds to

power on.
B. Double press MFB to enter into pairing mode with Red & Blue
LED flash alternately.
C. Turn on Bluetooth function of Phone, search and click to
 connect BTI-029 on Bluetooth device lists.
D. LED turns to solid Blue after connected, connect BTI-029 and
headphone or speaker with 3.5mm audio cable, play music from
phone to the headphone or speaker.

1. Off mode , slide to RX side.

2. Long press MFB 3 seconds to power on , and short press pairing

button to enter into pairing mode with Red & Blue LED flash
alternately.
3. Turn on Bluetooth function of phone (PC, laptop), search and click
to connect BTI029.

4. Slide to SPDIF side or AUX side to select the SPDIF or AUX mode
 (SPDIF port in RX mode is SPDIF OUT).

Multi Point Connections

A. Follow 4.1 to connect with the first device (phone, PC, laptop),
double press MFB to enter into pairing mode again, red and blue
lights flash alternately. (The first connected device is not affected
and can be used normally)

Double press BTI-029 pairing button to enter into pairing mode

again with Red & Blue LED flash alternately.
Turn on Bluetooth function of the second phone, search and click
 to connect BTI029 on phone Bluetooth lists. Multi point connection
with solid green LED.

Notes
(1) Only could play music from one phone when with two
connections.
(2) Priority support aptXTM low latency for one
connection(Connection device support aptXTM low latency),
support CODEC according to the phone which playing music for
two connections.

Speaker Connection

Connect BTI-029 and Speaker with 3.5 mm audio cable, and

Bluetooth connect with phone (PC, laptop), play music from your
phone to speaker.

Notes
Pls test the speaker with 3.5 mm audio cable (connect phone) to see
if workable, if could not play when connect with BTI-029.
Pls insert to SPDIF OUT port for Toslink connection.

Charging

Pls charging BTI-029 when low battery with Red LED flash. LED turn
off when full charged (about 2 hours ).
Connection for charge Connect BTI-029 and power supply (charger ,
car charger , computer USB etc) with Micro USB cable.
Charging with Micro USB / Charging with PC
Notes:
Pls charge the BTI-029 at least once every 2 months if without use.
Pls press “MFB” and connect with power supply to reset the item ,
when it dead during use.
It is normal for charging LED indicator to cover the bluetooth status
LED indicator when power on.

LED Indicator

Status LED Indicator

Power on Blue LED flash twice

Power off` Red LED flash twice

Blue LED flash（TX mode）

Pairing mode
Red & Blue LED flash alternately
（RX mode）
 Blue LED flash once every seco
nd (TX mode )
Unconnect standby mode
Blue LED flash twice every 3 se
conds (RX mode )

Connected standby mode Solid Blue LED

Low battery Red LED flash

Charging Solid Red LED

Full charged Red LED turn off

Product Specification

Bluetooth Version V5.0

Chipset Solution CSR 8670

Operation Range Class Ⅱ，10 meters

Bluetooth Profile A2DP、AVRCP

RX：aptX™ low latency、aptX™ 、A

CODEC AC、SBC TX：aptX™ low latency、a
ptX™ 、SBC
Battery Capacity 350mAh/3.7V

Charging Time About 2 hours

Standby Time RX mode：About 50 hours

About
RX 15 hou
rs
AUX
About
TX 15 hou
rs
Working Time
About
RX 12 hou
rs
SPDIF
About
TX A 12 hou
rs

Operating Temperature -10—55℃

Net Weight About 38.6 g

Size 60*60*18.4mm
Notes:

1. Working time will be different depend on different working

environment and CODEC
2. Standby time will be same as working time on TX mode, as it will
be working once connected
3. CODEC code depend on the connected devices and follow the
turns as mention

Attention and Q & A

1. Q. Power off automatically?

Ans: Without connect with any devices for more than 5 minutes
the item will power off automatically in RX mode (6 minutes if have
pairing record), except in TX mode.
2. Q. How to reconnect?
Ans: BTI-029 will reconnect with paired devices when power on. If
not , pls follow the 3.1 or 4.1 to pair & connect again.
3. Q. How to delete the paired records?
Ans: Switch to another mode （TX or RX）and power on, will
delete the paired records of the last mode. (Pls switch to another
mode after 3 seconds from power off in last mode.)
4. Q. Password for connect?
Ans: Pls enter “0000” (four zero), “8888” (four eight), ”1111” (four
one), or “1234” (one, two, three, four) for some devices which need
 password to connect .
5. Q. Could not power on or dead when connect?
Ans: Press MFB and connect with power supply to reset the item,
and repower for use.
6. Q. Charging power supply?
Ans: Charging power supply: 5V, ≥500 mA. (Charger, car charger ,
computer USB etc)

Support

For any support contact us on :

Email: [email protected]
Visit:www.melodymedia.in
Documents / Resources

CUBETEK Bluetooth Transmitter & Receiver [pdf] Use

r Manual
Bluetooth Transmitter Receiver, BTI-029

References

Melody Media | The Best Electronic Retailer from bangalore

Related Posts
R81 Receiver User manual

R81 Receiver User manual - Download

[optimized] R81 Receiver User manual -
Download
 R86 Receiver User manual

R86 Receiver User manual - Download

[optimized] R86 Receiver User manual -
Download

R84 Receiver User manual

R84 Receiver User manual - Download

[optimized] R84 Receiver User manual -
Download

R161 Receiver User manual

R161 Receiver User manual - Download

[optimized] R161 Receiver User manual -
Download

⼴告中的夸张⼿法

CUBETEK Bluetooth Transmitter Receiver, BTI-029, CUBETEK

Next Post—
CUBETEK CB-BT27 Bluetooth Audio Adapter User Guide

Join the Conversation

1 Comment

Patrick Lenne
says:
September 23, 2021 at 4:52 pm

Hello,
I am on a TV connection and I cannot receive sound through the
two ear cups of my headphones. Only one works.
Can you tell me what to do to make it work normally?
Thank you.
Bonjour,
Je suis en connexion tv et je n’arrive pas à recevoir le son dans les
deux oreillettes de mon casque. Une seule fonctionne.
Pouvez-vous me dire quelle manipulation faire pour que cela fonc-
tionne normalement?
Merci.

Reply
Leave a comment
Your email address will not be published. Required fields are marked *

Comment *

Name

Email

Website

Save my name, email, and website in this browser for the next time I comment.

Post Comment
Search
Search …

Search

Manuals+,