Scribd
Upload
55 views1 page

Frequency Sweep Level Switch LMFS

Trumen is one of India’s leading manufacturer, exporter supplier of Level Switches, Level Sensors, Level Indicators Level Transmitters in India, Indonesia,etc. Trumen is a technocrat driven organization aimed at providing top-of-the-range and high quality level measurement and process control instruments. Formed by the pioneers who devoted their respective lives in development, design and delivery of solution to the problems faced in the field of level sensing and process measurements. Trumen ha

Uploaded by

Trumen Technologies PVT Ltd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views1 page

Frequency Sweep Level Switch LMFS

Trumen is one of India’s leading manufacturer, exporter supplier of Level Switches, Level Sensors, Level Indicators Level Transmitters in India, Indonesia,etc. Trumen is a technocrat driven organization aimed at providing top-of-the-range and high quality level measurement and process control instruments. Formed by the pioneers who devoted their respective lives in development, design and delivery of solution to the problems faced in the field of level sensing and process measurements. Trumen ha

Uploaded by

Trumen Technologies PVT Ltd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LMFS...

Technical Specification Document Approvals & Certifications:

Frequency Sweep ®

Level Switch
sensing matters

Model LMFS
For General Industrial Applications
Features
Frequency Sweep for material type detection
Compact design with two independent outputs
Suitable for media distinction
Liquid fork simulation requires no calibration
Process temperature -40 ... 125 °C, and 150 °C for 1 hour
Suitable for materials with di-electric constant 𝛆r >1.5
Multicolor LED switch indicator, indicates type and output
Maintenance free
Fully field configurable without any special configurator
Three output types are PNP, NPN, Push-Pull field configurable

Product Overview Specifications


Sensor
The Level Switch LMFS is capable of faithfully detecting industrial fluids
Radiated signal 50...300 MHz
and powders using Frequency Sweep technology. Utilizing the resonance Process connection NPT / BSP 1", 11⁄4", 11⁄2", 2" etc
of electrical capacitance created by media di-electric and conducitvity, LMFS Insulating material PEEK
Mechanical data
learns the signature of the media to be sensed and thus performs better than
Housing Stainless Steel
other level detection methods for fluids and powders. Amb. temperature -40...70 °C
Process temperature -40...125 °C
Max. 150 °C for < 1 hour, Tamb 40 °C
A 50 to 300Mhz sweep signal of very low power (nano-watt) is applied to Protection class IP 66 / 68 (as per IS-13947)
the electromagnetic resonating circuit formed by material capacitance, Media pressure Max. 100 bar
an analysis section scans the amplitude of resulting resonance, and thus Vibrations As per IEC 60068-2-6, sinusodial
Installation Any position
assigns a frequnecy-amplitude relationship for a material type. Surface roughness wetted Stainless Steel Ra < 0.8 μm
parts PEEK Ra < 0.05 μm
Since LMFS can identify materials distinctively, it is capable of media Electrical connection
Plug M12 Plastic or Stainless steel 304
saperation and hence is designed to utilise the dual output and multi-color Cable 5 to 10 meters, 4 wire + shield
LED to provide different output for different material being sensed by it. Other electrical data
Power supply 9...55 VDC, 24 mA max.
Damping 0.1 minimum settable to max 25 sec.
LMFS is designed to keep all settings at field level without any special Power-up delay <2 sec.
requirement of configurator. Hysteresis ± 1 mm
Repeatability ± 1 mm
Reaction time 0.1 sec. (100 mS)
LMFS is able to work as Liquid Fork Simulator capable of detecting Reverse polarity protection Yes
fluids without any calibration. Calibration is required for media separation Output
Output (active) Max. 50mA and 100mA (configurable) short-circuit and
and powder detection.
high-temperature protected
Output type PNP, NPN, Push-Pull field configurable
Output polarity NO and NC
Active “High” PNP (Supply Vdc-1.0V) ± 0.5V ; Rload 10 kOhm
Active “Low” NPN (Supply 0V+1.0V) ± 0.5V ; Rload 10 kOhm
Push-Pull (within 1.0V ± 0.5V of Supply Limit)
Off leak current ± 20μA Max.
Factory Settings
Sensing Mode Liquid Fork Simulator (Sense all fluids)
Output As per Order (PNP/NPN/Push-Pull)

Specifications are subject to change without prior notice

Trumen Technologies Pvt. Ltd.


lmfs-qrd-p1-190406.svg

(an ISO 9001:2008 company)


®
39 Mangal Nagar, B/H Sai Ram Plaza, Nr. Rajiv Gandhi
Circle, AB Road, Indore, MP, 452 001, India
Phone: +91-731-497 2065
sensing matters
email: [email protected] web:www.trumen.in

You might also like