Scribd Logo
Upload

Welcome to Scribd!

  • 101 views

    RGV250 (VJ22) Wiring Con PDCI-20V (Side Stand)

    Uploaded by

    luis aguilera
    This document provides wiring information for connecting a relay to enable the sidestand function on an RGV250 motorcycle. It shows the pin connections for the TE Connectivity V23134A1052C643 automotive relay, with pins 87a, 30, and 87 connected to control the relay. Pins 85 and 86 are used to trigger the relay on and off. The relay is used to control the minimum and maximum solenoids when the sidestand function is required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RGV250 (VJ22) Wiring Con PDCI-20V (Side Stand)

    Uploaded by

    luis aguilera
    101 views1 page
    This document provides wiring information for connecting a relay to enable the sidestand function on an RGV250 motorcycle. It shows the pin connections for the TE Connectivity V23134A1052C643 automotive relay, with pins 87a, 30, and 87 connected to control the relay. Pins 85 and 86 are used to trigger the relay on and off. The relay is used to control the minimum and maximum solenoids when the sidestand function is required.

    Original Title

    RGV250(VJ22) Wiring Con PDCI-20V(Side Stand)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides wiring information for connecting a relay to enable the sidestand function on an RGV250 motorcycle. It shows the pin connections for the TE Connectivity V23134A1052C643 automotive relay, with pins 87a, 30, and 87 connected to control the relay. Pins 85 and 86 are used to trigger the relay on and off. The relay is used to control the minimum and maximum solenoids when the sidestand function is required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    101 views1 page

    RGV250 (VJ22) Wiring Con PDCI-20V (Side Stand)

    Uploaded by

    luis aguilera
    This document provides wiring information for connecting a relay to enable the sidestand function on an RGV250 motorcycle. It shows the pin connections for the TE Connectivity V23134A1052C643 automotive relay, with pins 87a, 30, and 87 connected to control the relay. Pins 85 and 86 are used to trigger the relay on and off. The relay is used to control the minimum and maximum solenoids when the sidestand function is required.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    RGV250 VJ22

    USE RELAY WHEN SIDESTAND FUNCTION IS REQUIRED


    TE CONNECTIVITY V23134A1052C643 Automotive Relay (Farnell 1175079)

    87a
    30
    87

    85 86

    1N4007
    B/W
    MIN SOLENOID (POWER JET 1)
    R/B

    MAX SOLENOID (DUTY SOLENOID)


    Br
    COLOUR CODES:
    B - black
    Br - brown L/R
    TPS-
    L - blue REMOVE ORIGINAL CDI UNIT!
    TPS
    LL - light blue Gr
    CDI CONNECTOR

    ORIGINAL CONTROLLER CONNECTORS


    G - green TPS+ B/G
    O/B
    Y

    REMOVE ORIGINAL CONTROLLER!


    R - red W/L O
    W
    PV SENS G
    W - white NC Br/W

    Gr - gray
    B/Y

    B/W
    L

    NC
    PDCI-20V V

    Y
    PV SERVO+

    PV SERVO-
    O/W
    L
    L
    V - violet NC Gr
    P - pink O/B NC TACHOMETER NC B
    G/B
    NC R/W
    O - orange B
    GND
    W/R
    R
    NC Y/G +12V
    R L/B
    Y/G
    B/W
    R/B
    W
    QUICK SHIFT Br
    P
    P
    B/R
    O/B

    REAR PICKUP
    G
    IGNITION MAP SW
    FRONT PICKUP
    G/W
    SW "open" = ignition map #1 Br/G
    SW "close" = ignition map #2 Br/W

    R/W
    PV CURVE SW
    SW "open" = PV curve #1 Y/R
    SW "close" = PV curve #2

    SHIFT LIGHT
    1A continuous
    V/W

    You might also like